Effect of guest hydrophobicity on water sorption behavior of oligomer/alpha-cyclodextrin inclusion complexes

Cyclomaltohexaose (alpha-cyclodextrin, alpha-CD) can form inclusion complexes (ICs) with polymer molecules in the columnar crystal structure in which alpha-CD molecules stack to form a molecular tube. Complementary water vapor sorption and wide-angle X-ray diffractomery (WAXD) were performed on oligomer/alpha-CD ICs to determine their structures and stabilities. To discern the effect of guest molecule hydrophobicity on water adsorption isotherms, polyethylene glycol (PEG, MW = 600 g/mol) and hexatriacontane (HTC) guests were used. Sorption isotherms for PEG/alpha-CD IC are similar to those obtained for pure alpha-CD and PEG, suggesting the presence of dethreaded PEG in the sample. WAXD collected before and after water vapor sorption of PEG/alpha-CD IC indicated a partial conversion from columnar to cage crystal structure, the thermodynamically preferred structure for pure alpha-CD, due to dethreading of PEG. This behavior does not occur for HTC/alpha-CD IC. Sorption isotherms collected at 20, 30, 40, and 50 degrees C allowed the calculation of the isosteric heats of adsorption and the integral entropies of adsorbed water which are characterized by minima that indicate the monolayer concentration of water in the ICs.     

Crystalline inclusion complexes formed between the drug diflunisal and block copolymers

The solid form of drugs plays a central role in optimizing the physicochemical properties of drugs, and new solid forms will provide more options to achieve the desirable pharmaceutical profiles of drugs. Recently, certain drugs have been found to form crystalline inclusion complexes (ICs) with multiple types of linear polymers, representing a new subcategory of pharmaceutical solids. In this study, we used diflunisal (DIF) as the model drug host and extended the guest of drug/polymer ICs from homopolymers to block copolymers of poly(ethylene glycol) (PEG) and poly(ε-caprolactone) (PCL). The block length in the guest copolymers showed a significant influence on the formation, thermal stability and dissolution behavior of the DIF ICs. Though the PEG block could hardly be included alone, it could indeed be included in the DIF ICs when the PCL block was long enough. The increase of the PCL block length produced IC crystals with improved thermal stability. The dissolution profiles of DIF/block copolymer ICs exhibited gradually decreased aqueous solubility and dissolution rate with the increasing PCL block length. These results demonstrate the possibility of using drug/polymer ICs to modulate the desired pharmaceutical profiles of drugs in a predictable and controllable manner.     

Supramolecular hydrogel formation based on inclusion complexation between poly(ethylene glycol)-modified chitosan and alpha-cyclodextrin

Supramolecular hydrogels have been prepared on the basis of polymer inclusion complex (PIC) formation between poly(ethylene glycol) (PEG)-modified chitosans and alpha-cyclodextrin (alpha-CD). A series of PEG-modified chitosans were synthesized by coupling reactions between chitosan and monocarboxylated PEG using water-soluble carbodiimide (EDC) as coupling agent. With simple mixing, the resultant supramolecular assembly of the polymers and alpha-CD molecules led to hydrogel formation in aqueous media. The supramolecular structure of the PIC hydrogels was confirmed by differential scanning calorimetry (DSC), X-ray diffraction, and (13)C cross-polarized/magic-angle spinning (CP/MAS) NMR characterization. The PEG side-chains on the chitosan backbones were found to form inclusion complexes (ICs) with alpha-CD molecules, resulting in the formation of channel-type crystalline micro-domains. The IC domains play an important role in holding together hydrated chitosan chains as physical junctions. The gelation property was affected by several factors including the PEG content in the polymers, the solution concentration, the mixing ratio of host and guest molecules, temperature, pH, etc. All the hydrogels in acidic conditions exhibited thermo-reversible gel-sol transitions under appropriate conditions of mixing ratio and PEG content in the mixing process. The transitions were induced by supramolecular association and dissociation. These supramolecular hydrogels were found to have phase-separated structures that consist of hydrophobic crystalline PIC domains, which were formed by the host-guest interaction between alpha-CD and PEG, and hydrated chitosan matrices below the pK(a).The formation of inclusion complexes between alpha-cyclodextrin and PEG-modified chitosan leads to the formation of hydrogels that can undergo thermo-reversible supramolecular dissociation.     

Supramolecular aggregations through the inclusion complexation of cyclodextrins and polymers with bulky end groups

Mono‐polyhedral oligomeric sillsesquioxane‐end capped poly(ε‐caprolactone) (mPPCL) can form inclusion complexes (ICs) with α‐ and γ‐cyclodextrins (CDs) but not with β‐CD. These CD ICs have been characterized with X‐ray diffraction, solid‐state ¹³C cross‐polarization/magic‐angle‐spinning NMR spectroscopy, ¹H NMR spectroscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, and scanning electron microscopy. The poly(ε‐caprolactone) (PCL) chain of mPPCL is included within the channel provided by the CDs to form a columnar, crystalline structure. The PCL/CD ratios determined by ¹H NMR spectroscopy for the ICs with α‐ or γ‐CDs are higher than the stoichiometries because of the steric hindrance of the bulky polyhedral oligomeric silsesquioxane chain end and result in a fraction of the ε‐caprolactone units free from complexation with the CDs. On the basis of these analyses, we propose some possible structures for these CD/mPPCL ICs. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 125–135, 2007     

Formation process of cyclodextrin necklace-analysis of hydrogen bonding on a molecular level

By means of scanning tunneling microscopy (STM), we succeeded for the first time in the quantitative analysis of the intramolecular conformation of a supramolecule, cyclodextrin (CyD) necklace, driven by hydrogen bonding. Contrary to the current model, based on macroscopic analyses, which indicates that all CyDs are arranged in head-to-head or tail-to-tail (secondary-secondary or primary-primary hydrogen bonding) conformation, about 20% head-to-tail (primary-secondary hydrogen bonding) conformation was found to exist in the molecule. In addition, comparing the STM results with the theoretical model of the necklace formation, the formation ratio of the tail-to-tail and head-to-tail conformations due to the strength difference between primary-primary and primary-secondary hydrogen bonds of CyDs was directly obtained, for the first time, to be 2:1.     

Solvent‐dependent formation of inclusion complexes between methylated cyclodextrins and biodegradable polymers

The inclusion complexes (ICs) of unmodified natural and methylated α‐cyclodextrins (CDs) with biodegradable polymers, polyethylene glycol and poly(ε‐caprolactone), were prepared by two methods, that is, the one using water and the other using chloroform as the solvent for the respective CDs. The ICs obtained were characterized by IR, WAXD, DSC, and ¹³C CP/MAS NMR. It was found that the possibility and the phenomena of IC formation could be varied with the degree of methyl substitution of CD as well as the type of solvents used. Methylated α‐CDs showed the prominent characteristics of IC formation with polymers in the case where chloroform was used than in the case where water was used as the solvent for CDs, while vice versa in the case of native α‐CD. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 879–891, 2008     

Molecular mixing of incompatible polymers through formation of and coalescence from their common crystalline cyclodextrin inclusion compounds

We describe the successful mixing of polymer pairs and triplets that are normally incompatible to form blends that possess molecular‐level homogeneity. This is achieved by the simultaneous formation of crystalline inclusion compounds (ICs) between host cyclodextrins (CDs) and two or more guest polymers, followed by coalescing the included guest polymers from their common CD–ICs to form blends. Several such CD–IC fabricated blends, including both polymer1/polymer2 binary and polymer1/ polymer2/polymer3 ternary blends, are described and examined by means of X‐ray diffraction, differential scanning calorimetry, thermogravimetric analysis, Fourier transform infrared spectroscopy, and solid‐state NMR to probe their levels of mixing. It is generally observed that homogeneous blends with a molecular‐level mixing of blend components is achieved, even when the blend components are normally immiscible by the usual solution and melt blending techniques. In addition, when block copolymers composed of inherently immiscible blocks are coalesced from their CD–ICs, significant suppression of their normal phase‐segregated morphologies generally occurs. Preliminary observations of the thermal and temporal stabilities of the CD–IC coalesced blends and block copolymers are reported, and CD–IC fabrication of polymer blends and reorganization of block copolymers are suggested as a potentially novel means to achieve a significant expansion of the range of useful polymer materials. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4207–4224, 2004     

Preparation and characterization of the crystalline inclusion complexes between cyclodextrins and poly(1,3-dioxolane)

The preparation and characterization of the crystalline inclusion complexes between a polymeric guest, poly(1,3-dioxolane) (PDXL), and small-molecular hosts, cyclodextrins (CDs) are reported. It is observed that the polymer guest can form crystalline inclusion complexes with three kinds of cyclodextrins, which may be attributed to the high oxygen atom density in PDXL chain. The crystalline inclusion complexes were characterized with FTIR , TGA, X-ray diffraction, SEM, 1H NMR and 13C CP/MAS NMR spectroscopes. It was found that the crystalline inclusion complexes have higher temperature stability than the pure CDs. The X-ray powder diffraction patterns of the crystalline inclusion complexes proved that they have columnar structures. 13C CP/MAS NMR spectra of the crystalline inclusion complexes indicate that CDs adopt a more symmetrical conformation in the complexes, while pure CDs assume a less symmetrical conformation in the crystal without a guest inside their cavities. The morphology of the crystal was     

Copolymer-cyclodextrin inclusion complexes in water and in the solid state. A physico-chemical study

The formation of inclusion complexes (ICs) composed of cyclodextrins (CDs) and poly(ethylene oxides)-poly(propylene oxides)-poly(ethylene oxides) (PEO-PPO-PEO) was studied. To this purpose, native and hydroxypropyl cyclodextrins with different cavity size were chosen. The PEO-PPO-PEO copolymers were selected to study the role of the molecular weight, keeping constant the hydrophilic/hydrophobic ratio, and the hydrophilicity. The volumetric studies at 25 degrees C allowed to determine the equilibrium constant and the volume change for the IC formation in water as well as the IC stoichiometry. Surface tension experiments evidenced that the copolymer and the CD interfacial behavior is controlled by the formation of ICs taking place in the bulk phase. It was proved that the differential scanning calorimetry (DSC) is a valid method to describe quantitatively the IC in the solid state. The combination of volumes, DSC and FTIR techniques together with the geometric information highlighted the following points: (1) the included copolymer is in the amorphous state; (2) the IC composed of native CDs adopts a channel structure with two EO units incorporated into one CD molecule; (3) the IC composed of hydroxypropyl-cyclodextrin is a polymeric structure like a necklace decorated with CD rings. Finally, TGA experiments showed that the thermal stability of the IC depends on the nature of both components.     

Supramolecular self-assembly of inclusion complexes of a multiarm hyperbranched polyether with cyclodextrins

A new class of crystalline inclusion complexes of a multiarm hyperbranched polyether combined with various cyclodextrins (CDs) was successfully prepared. Using self-condensing ring-opening polymerization, a kind of multiarm polyether with a hyperbranched poly(3-ethyl-3-oxetanemethanol) core and multiple linear poly(ethylene glycol) (PEG) arms was obtained. It has been found that this kind of hyperbranched polyether can be dissolved in water. Adding alpha-CDs to the multiarm hyperbranched polyether solution, molecular recognition results in the formation of crystalline inclusion complexes based on the noncovalent interactions between the linear PEG arms of the polyether particles and the alpha-CDs. These multiarm polyether inclusion complexes have been well characterized. Interestingly, quite different from inclusion complexes of CDs and linear polymeric guests, the complexes of the multiarm hyperbranched polyether with alpha-CDs show a novel lamellar morphology. The experimental results validate that the resultant lamellar crystals have a juxtaposed structure. In addition, the formation mechanism of these inclusion complexes of a multiarm polyether with alpha-CDs has also been well described. Besides the role of displacement of associated water molecules and the presence of hydrogen bonding between CDs in channel structure CD inclusion complexes, the noncovalent intermolecular forces between CDs and polymers also play an important role in the formation of complex architectures.     

Nucleation effect of cyclodextrin inclusion complexes on the crystallization of isotactic poly(1‐butene)

The β‐cyclodextrin (β‐CD) and γ‐cyclodextrin (γ‐CD) inclusion complexes (ICs) with four kinds of polyolefin were prepared. The crystallization behavior of isotactic poly(1‐butene) (iPB‐1) blended with these CDs and ICs was investigated by differential scanning calorimetry, polarized optical microscopy, and wide‐angle X‐ray diffraction. The iPB‐1 blended with the ICs was found to exhibit higher crystallization temperature (T_C), smaller spherulites, and faster crystallization rate than neat iPB‐1. These results indicate that the ICs can act as nucleating agent on the crystallization of iPB‐1 and induce the accelerated crystallization. The guest molecules of ICs play an important role in the nucleation effect of ICs on the crystallization of iPB‐1. ICs with polyolefin having higher T_C as guest molecules have higher nucleation effect than the one with polyolefin having lower T_C as guest molecules. And, the CDs and ICs induce different crystal form of iPB‐1. The crystal of iPB‐1 blended with CDs is defective, whereas the crystal of iPB‐1 blended with ICs is more perfect. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 389–395, 2010     

Preparation and characterization of polypseudorotaxanes based on block-selected inclusion complexation between poly(propylene oxide)-poly(ethylene oxide)-poly(propylene oxide) triblock copolymers and alpha-cyclodextrin

A series of new polypseudorotaxanes were synthesized in high yields when the middle poly(ethylene oxide) (PEO) block of poly(propylene oxide)-poly(ethylene oxide)-poly(propylene oxide) (PPO-PEO-PPO) triblock copolymers was selectively recognized and included by alpha-cyclodextrin (alpha-CD) to form crystalline inclusion complexes (ICs), although the middle PEO block was flanked by two thicker PPO blocks, and a PPO chain had been previously thought to be impenetrable to alpha-CD. X-ray diffraction studies demonstrated that the IC domains of the polypseudorotaxanes assumed a channel-type structure similar to the necklace-like ICs formed by alpha-CD and PEO homopolymers. Solid-state CP/MAS (13)C NMR studies showed that the alpha-CD molecules in the polypseudorotaxanes adopted a symmetrical conformation due to the formation of ICs. The compositions and stoichiometry of the polypseudorotaxanes were studied using (1)H NMR, and a 2:1 (ethylene oxide unit to alpha-CD) stoichiometry was found for all polypseudorotaxanes although the PPO-PEO-PPO triblock copolymers had different compositions and block lengths, suggesting that only the PEO block was closely included by alpha-CD molecules, whereas the PPO blocks were uncovered. The hypothesis was further supported by the differential scanning calorimetry (DSC) studies of the polypseudorotaxanes. The glass transitions of the PPO blocks in the polypseudorotaxanes were clearly observed because they were uncovered by alpha-CD and remained amorphous, whereas the glass-transition temperatures increased, because the molecular motion of the PPO blocks was restricted by the hard crystalline phases of the IC domains formed by alpha-CD and the PEO blocks. The thermogravimetric analysis (TGA) revealed that the polypseudorotaxanes had better thermal stability than their free components due to the inclusion complexation. Finally, the kinetics of the threading process of alpha-CD onto the copolymers was also studied. The findings reported in this article suggested interesting possibilities in designing other cyclodextrin ICs and polypseudorotaxanes with block structures.     

Encapsulation of vortioxetine with cyclodextrins via host–guest inclusion complex: Synthesis,characterization, solubility,and in vitro dissolution studies

Drug solubility plays a significant role in the development of drug formulation. The objectives of this work are to improve the solubility and dissolution rate of vortioxetine (VT) by preparing its inclusion complexes (ICs) with β-Cyclodextrin (β-CD) and γ-Cyclodextrin (γ-CD). The ICs were prepared in 1:1 M ratio via recrystallization method and characterized by P-XRD, FT-IR, ¹H NMR, 2D NOESY, and DSC. Further, the crystal structure of VT-β-CD was analyzed by SC-XRD. P-XRD data obtained for ICs describe the crystalline pattern. The DSC analysis shows change in the thermal behavior of VT, CDs and ICs. FT-IR analysis shows shifting of frequencies in ICs when compared with the pristine VT drug and CDs. The 2D NOESY in DMSO-d⁶ indicates weak interaction between the VT and CD molecules. The crystal structure of VT-β-CD consists of one guest VT, one host CD, and nine water molecules in the crystal lattice. The solubility of ICs was significantly improved in distilled water, pH 1.2 acidic, and phosphate buffer pH 6.8 medium, as compared with the solubility of the pristine VT drug. The in vitro dissolution rate of ICs in different dissolution media was investigated, which was higher than that of the commercial product of VT.     

Effects of solvent,casting temperature,and guest/host stoichiometries on the properties of shape memory material based on partial α‐CD‐PEG inclusion complex

A series of supramolecular inclusion complex (IC) films were formed by threading α‐cyclodextrin (α‐CD) molecules over poly(ethylene glycol) (PEG), according to the designed ratio of α‐CD/PEG. Because of containing α‐CD‐PEG inclusion crystallites as physical crosslinks and uncovered PEG crystallites as “switch phase”, the resulting supramolecular α‐CD‐PEG partial ICs displayed a shape memory effect. The properties of the materials were investigated by ¹H‐NMR, X‐ray diffraction (XRD), differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and swelling measurement. It was found that the casting temperature, solvent, and the ratio of α‐CD‐PEG inclusion/PEG had great influence on the formation and properties of α‐CD‐PEG partial ICs. The modes of complexes on different conditions were proposed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 951–957, 2010     

Head-to-head units in poly(propylene oxide) by ozonation

By extensive ozonation and lithium aluminum hydride reduction, poly(propylene oxide) can be converted to material containing dipropylene glycol. Since the diprimary, disecondary, and primary-secondary isomers are readily separable by vapor-phase chromatography, it has been possible to show that some (but not all) noncrystalline PPO samples contain many head-to-head, tail-to-tail monomer units. Correlation of the fraction of head-to-head units with the optical rotation of noncrystalline fractions from optically active monomer, indicates that there is one asymmetric center inverted for every unit inserted head-to-head. The earlier suggestion that the noncrystalline fraction was due to atactic stereochemistry is thus shown to be generally incorrect in favor of an explanation due to positional isomerization.     

Formation and characterization of inclusion complexes of poly(butylene succinate) with alpha- and gamma-cyclodextrins

The inclusion complexes (ICs) of alpha- and gamma-cyclodextrins (CDs) with high-molecular-weight poly(butylene succinate) (PBS) were prepared and characterized by differential scanning calorimetry, Fourier-transform infrared spectroscopy (FT-IR), wide-angle X-ray diffraction, solid-state 13C nuclear magnetic resonance (NMR) spectroscopy, and solution 1H NMR spectroscopy. The resultant ICs were found to have channel structures. FT-IR data suggested that the ICs were stabilized by hydrogen bonds between the host CD molecules and the guest PBS chains. Through the formation of ICs, the PBS chain possibly adopts the kink conformation in the included state, as indicated by NMR analysis.     

Morphology and Crystalline Structure of Inclusion Compounds Formed between Poly（ethylene glycol） and Urea

The poly（ethylene glycol） （PEG, with Mw 2000）-urea inclusion compound （IC） crystallized at high temperature region showed two typical orientations, flat-on and edge-on crystals. 2D-XRD and polarized FTIR spectroscopy revealed that the PEG chains within urea channels were perpendicular to the substrate in fiat-on oriented crystals, while PEG chain axes were parallel to the substrate and lay along the growth direction in the edge-on crystals. FT1R absorption bands of PEG in the ICs are sensitive to orientation of the crystals. A scheme of PEG chain packing in the urea IC channel was proposed, which could explain the orientation of the crystal nucleus causing the two types of morphologies. Furthermore, functioning of PEG2000 chain end with analine had significantly influence on the morphology and orientation of the inclusion compound crystals, due to the defects caused by large terminal groups included in the urea channel.     

Injectable supramolecular hybrid hydrogels formed by MWNT‐grafted‐poly(ethylene glycol) and α‐cyclodextrin

Poly(ethylene glycol)‐grafted‐multiwalled carbon nanotube (MWNT‐g‐PEG) was synthesized by a coupling reaction and formed inclusion complexes (ICs) after selective threading of the PEG segment of the MWNT‐g‐PEG through the cavities of α‐cyclodextrins (α‐CDs) units. The polypseudorotaxane structures of the as‐obtained hydrogels were confirmed by ¹H NMR, X‐ray diffraction and DSC analyses. The complexation of the PEG segments with α‐CDs and the hydrophobic interaction between the MWNT resulted in the formation of supramolecular hybrid hydrogels with a strong network. Thermal analysis showed that the thermal stability of the hydrogel was substantially improved by up to 100 °C higher than that of native hydrogel. The resultant hybrid hydrogels were found to be thixotropic and reversible, and could be applied as a promising injectable drug delivery system. The mechanical strength of the hybrid hydrogels was greatly improved in comparison with that of the corresponding native hydrogels. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3145–3151, 2010     

Nanophase separation and crystallization in PEIM-12 poly(4,4′-phthaloimidobenzoyl-dodecamethyleneoxycarbonyl)

Nanophase separated poly(4,4′-phthaloimidobenzoyl-dodecamethyleneoxycarbonyl) (PEIM-12) is studied by solid-state ¹³C-NMR (nuclear magnetic resonance), differential scanning calorimetry and X-ray and neutron diffraction techniques. On cooling from the melt, PEIM-12 shows a layer structure that has been described in the literature either as a nanophase-separated material or a monotropic, thermotropic liquid crystal. Further crystallization leads to two possible crystalline phases (I and II). The new measurements reveal a biphasic behavior below the thermal transition temperatures. The lamellar superstructure is shown by neutron and X-ray scattering to be largely independent of the crystals and may even exist above the melting point. The two crystal forms are shown by NMR to differ in conformational ordering in the flexible spacers. Crystal II possesses conformational order in the center of the flexible spacer, while crystal I shows order at the ends. Sufficient conformational disorder remains, however, in both crystals, to make them condis crystals, short for conformationally disordered crystals. Calorimetry agrees with the measured entropies of disordering. The disagreement between the earlier analyses is eliminated by assuming that PEIM-12 is a special borderline liquid crystal former. Small changes in the structural order (head-to-head or head-to-tail) can change the behavior from that of a monotropic, thermotropic liquid crystal to an amphiphilic, nanophase-separated liquid crystal. © 1997 John Wiley & Sons, Ltd.     

Inclusion complexes of cyclodextrins with hydrophobic ionic liquids

Two imidazolium-based hexafluorophosphate ionic liquids (ILs), 1-butyl-3-methylimidazolium hexafluorophosphate and 1-dodecyl-3-methylimidazolium hexafluorophosphate, were used to form inclusion complexes (ICs) with α- and β-cyclodextrins (CDs). Formation of the ICs of each CD with each IL was confirmed by the appearance of a characteristic peak in the UV region. Characterisation of the ICs by NMR and FT-IR spectroscopy provided information about the interactions between the host and guest molecules and the structure of the ICs. Temperature-dependent particle size analysis by dynamic light scattering suggested that the size of the host and the guest governs their stability.