Halogen-Bond Mediated [2+2] Photodimerizations: À la Carte Access to Unsymmetrical Cyclobutanes in the Solid State

The ditopic halogen-bond (X-bond) donors 1,2-, 1,3-, and 1,4-diiodotetrafluorobenzene (1,2-, 1,3-, and 1,4-di-I-tFb, respectively) form binary cocrystals with the unsymmetrical ditopic X-bond acceptor trans-1-(2-pyridyl)-2-(4-pyridyl)ethylene (2,4-bpe). The components of each cocrystal (1,2-di-I-tFb)·(2,4-bpe), (1,3-di-I-tFb)·(2,4-bpe), and (1,4-di-I-tFb)·(2,4-bpe) assemble via N···I X-bonds. For (1,2-di-I-tFb)·(2,4-bpe) and (1,3-di-I-tFb)·(2,4-bpe), the X-bond donor supports the C=C bonds of 2,4-bpe to undergo a topochemical [2+2] photodimerization in the solid state: UV-irradiation of each solid resulted in stereospecific, regiospecific, and quantitative photodimerization of 2,4-bpe to the corresponding head-to-tail (ht) or head-to-head (hh) cyclobutane photoproduct, respectively.     

From 1D to 2D Cd(II) and Zn(II) Coordination Networks by Replacing Monocarboxylate with Dicarboxylates in Partnership with Azine Ligands: Synthesis,Crystal Structures,Inclusion, and Emission Properties

Eight mixed-ligand coordination networks, [Cd(2-aba)(NO₃)(4-bphz)_3/2]_n·n(dmf) (1), [Cd(2-aba)₂(4-bphz)]_n·0.75n(dmf) (2), [Cd(seb)(4-bphz)]_n·n(H₂O) (3), [Cd(seb)(4-bpmhz)]_n·n(H₂O) (4), [Cd(hpa)(3-bphz)]_n (5), [Zn(1,3-bdc)(3-bpmhz)]_n·n(MeOH) (6), [Cd(1,3-bdc)(3-bpmhz)]_n ·0.5n(H₂O)·0.5n(EtOH) (7), and [Cd(NO₃)₂(3-bphz)(bpe)]_n·n(3-bphz) (8) were obtained by interplay of cadmium nitrate tetrahydrate or zinc nitrate hexahydrate with 2-aminobenzenecarboxylic acid (H(2-aba)), three dicarboxylic acids, sebacic (decanedioic acid, H₂seb), homophthalic (2-(carboxymethyl)benzoic acid, H₂hpa), isophthalic (1,3-benzenedicarboxylic acid, H₂(1,3-bdc)) acids, bis(4-pyridyl)ethane (bpe) and with four azine ligands, 1,2-bis(pyridin-4-ylmethylene)hydrazine (4-bphz), 1,2-bis(1-(pyridin-4-yl)ethylidene) hydrazine (4-bpmhz), 1,2-bis(pyridin-3-ylmethylene)hydrazine (3-bphz), and 1,2-bis(1-(pyridin-3-yl) ethylidene)hydrazine (3-bpmhz). Compounds 1 and 2 are 1D coordination polymers, while compounds 3–8 are 2D coordination polymers. All compounds were characterized by spectroscopic and X-ray diffraction methods of analysis. The solvent uptakes and stabilities to the guest evacuation were studied and compared for 1D and 2D coordination networks. The de-solvated forms revealed a significant increase of emission in comparison with the as-synthesized crystals.     

Synthesis of 3,4-Bis(Butylselanyl)Selenophenes and 4-Alkoxyselenophenes Promoted by Oxone®

We describe herein an alternative transition-metal-free procedure to access 3,4-bis(butylselanyl)selenophenes and the so far unprecedented 3-(butylselanyl)-4-alkoxyselenophenes. The protocol involves the 5-endo-dig electrophilic cyclization of 1,3-diynes promoted by electrophilic organoselenium species, generated in situ through the oxidative cleavage of the Se-Se bond of dibutyl diselenide using Oxone^® as a green oxidant. The selective formation of the title products was achieved by controlling the solvent identity and the amount of dibutyl diselenide. By using 4.0 equiv of dibutyl diselenide and acetonitrile as solvent at 80 °C, four examples of 3,4-bis(butylselanyl)selenophenes were obtained in moderate to good yields (40–78%). When 3.0 equiv of dibutyl diselenide were used, in the presence of aliphatic alcohols as solvent/nucleophiles under reflux, 10 3-(butylselanyl)-4-alkoxyselenophenes were selectively obtained in low to good yields (15–80%).     

Reaction of ketenes with N,N-disubstituted 2-aminomethylenecycloalkanones. V. Synthesis of N,N-disubstituted 4′-aminospiro [1,3-dithiane-2,3′-(5′,6′-polymethylene-3′,4′-dihydro-α-pyrones)]

The reaction of 2-carbonyl-1,3-dithiane, a sulfene prepared in situ from 2-chloroearbonyl-1,3-dithiane and triethylamine, with N,N-disubstituted 2-aminomethylvnecycloalkanones gave the 1,4-cycloadducts, namely N,N-disubstituted 4′-aminospiro[1,3-dithiane-2,3′-(5′,6′-poly-methylene-3′,4′-dihydro-α-pyrones)].     

Identification of the Primary Structure of Selenium-Containing Polysaccharides Selectively Inhibiting T-Cell Proliferation

We previously described the biosynthesis, isolation, and immunosuppressive activity of the selenium-containing polysaccharide fraction isolated from the mycelial culture of Lentinula edodes. Structural studies have shown that the fraction was a protein-containing mixture of high molar mass polysaccharides α- and β-glucans. However, which of the components of the complex fraction is responsible for the immunosuppressive activity non-typical for polysaccharides of fungal origin has not been explained. In the current study, we defined four-polysaccharide components of the Se-containing polysaccharide fraction determined their primary structure and examined the effect on T- and B-cell proliferation. The isolated Se-polysaccharides, α-1,4-glucan (M_w 2.25 × 10⁶ g/mol), unbranched β-1,6-d-glucan, unbranched β-1,3-d-glucan and β-1,3-branched β-1,6-d-glucan (M_w 1.10 × 10⁵ g/mol), are not typical as components of the cell wall of L. edodes. All are biologically active, but the inhibitory effect of the isolated polysaccharides on lymphocyte proliferation was weaker, though more selective than that of the crude fraction.     

Tetrel Bonding in Anion Recognition: A First Principles Investigation

Twenty-five molecule–anion complex systems [I₄Tt···X⁻] (Tt = C, Si, Ge, Sn and Pb; X = F, Cl, Br, I and At) were examined using density functional theory (ωB97X-D) and ab initio (MP2 and CCSD) methods to demonstrate the ability of the tetrel atoms in molecular entities, I₄Tt, to recognize the halide anions when in close proximity. The tetrel bond strength for the [I₄C···X⁻] series and [I₄Tt···X⁻] (Tt = Si, Sn; X = I, At), was weak-to-moderate, whereas that in the remaining 16 complexes was dative tetrel bond type with very large interaction energies and short Tt···X close contact distances. The basis set superposition error corrected interaction energies calculated with the highest-level theory applied, [CCSD(T)/def2-TZVPPD], ranged from −3.0 to −112.2 kcal mol⁻¹. The significant variation in interaction energies was realized as a result of different levels of tetrel bonding environment between the interacting partners at the equilibrium geometries of the complex systems. Although the ωB97X-D computed intermolecular geometries and interaction energies of a majority of the [I₄Tt···X⁻] complexes were close to those predicted by the highest level of theory, the MP2 results were shown to be misleading for some of these systems. To provide insight into the nature of the intermolecular chemical bonding environment in the 25 molecule–anion complexes investigated, we discussed the charge-density-based topological and isosurface features that emanated from the application of the quantum theory of atoms in molecules and independent gradient model approaches, respectively.     

Synthesis,Characterization, and Non-Covalent Interactions of Palladium(II)-Amino Acid Complexes

The reaction of palladium(II) acetate with acyclic amino acids in acetone/water yields square planar bis-chelated palladium amino acid complexes that exhibit interesting non-covalent interactions. In all cases, complexes were examined by multiple spectroscopic techniques, especially HRMS (high resolution mass spectrometry), IR (infrared spectroscopy), and ¹H NMR (nuclear magnetic resonance) spectroscopy. In some cases, suitable crystals for single crystal X-ray diffraction were able to be grown and the molecular structure was obtained. The molecular geometries of the products are discussed. Except for the alanine complex, all complexes incorporate water molecules into the extended lattice and exhibit N-H···O and/or O···(HOH)···O hydrogen bonding interactions. The non-covalent interactions are discussed in terms of the extended lattice structures exhibited by the structures.     

An Ab Initio Study of Conformational Energies in Dioxo-, Trioxo-, and Tetroxo-Dithianes

Ab initio Hartree–Fock calculations at the HF/6-31G* level of theory for geometry optimization and the MP2/6-31G*//HF/6-31G* and B3LYP/6-311G(2df,p)//HF/6-31G* levels for a single point total energy calculation are reported for the important energy-minimum conformations of 1,1-dioxo-thiane (2), 1,1-dioxo-1,2-dithiane (3), 1,1-dioxo-1,3-dithiane (4), 1,1-dioxo-1,4-dithiane (5), 1,1,2-trioxo-1,2-dithiane (6), 1,1,3-trioxo-1,3-dithiane (7), 1,1,4-trioxo-1,4-dithiane (8), 1,1,2,2-tetroxo-1,2-dithiane (9), 1,1,3,3-tetroxo-1,3-dithiane (10), and 1,1,4,4-tetroxo-1,4-dithiane (11). According to the MP2/6-31G*//HF/6-31G* calculations, compound 5 is more stable than 3 and 4 by 7.8 and 8.9 kJ mol^?1, respectively. The axial geometries of 6 and 8 are more stable than the equatorial forms by 21.4 and 19.1 kJ mol^?1, respectively, but the equatorial form of 7 is 4.1 kJ mol^?1 more stable than the axial geometry. Compound 11 is more stable than 9 and 10 by 49.3 and 31.0 kJ mol^?1, respectively.     

Reaction of 1,3-thiazolidine-4-carboxylic and 1,4-tetrahydro-thiazine-3-carboxylic acid esters with isocyanates and isothiocyanates and structures of the reaction products

7-Thia-1,3-diazabicyclo[3.3.0]octane-2,4-diones and 7-thia-1,3-diazabicyclo[4.3.0]-nonane-2, 4-diones, as well as their thio analogs, were obtained by the reaction of (S)-1,3-thiazolidine-4-carboxylic and 1,4-tetrahydrothiazine-3-carboxylic acid esters with isocyanates and isothiocyanates. Intermediate reaction products, viz., heterocyclic derivatives of urea, were isolated. The three-dimensional structures of the 3-methyl-4-oxo-7-thia-1,3-diazabicyclo[3.3.0]octane-2-thione and 3-methyl-4-oxo-7-thia-1, 3-diazabicyclo[4.3.0]nonane-2-thione molecules were determined by x-ray diffraction analysis.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1327–1332, October, 1985.     

Stimuli Responsive Materials Supported by Orthogonal Hydrogen and Halogen Bonding or I···Alkene Interaction

Smart materials represent an elegant class of (macro)-molecules endowed with the ability to react to chemical/physical changes in the environment. Herein, we prepared new photo responsive azobenzenes possessing halogen bond donor groups. The X-ray structures of two molecules highlight supramolecular organizations governed by unusual noncovalent bonds. In azo dye I-azo-NO₂, the nitro group is engaged in orthogonal H···O···I halogen and hydrogen bonding, linking the units in parallel undulating chains. As far as compound I–azo–NH–MMA is concerned, a non-centrosymmetric pattern is formed due to a very rare I···π interaction involving the alkene group supplemented by hydrogen bonds. The Cambridge Structural Database contains only four structures showing the same I···CH₂=C contact. For all compounds, an ¹⁹F-NMR spectroscopic analysis confirms the formation of halogen bonds in solution through a recognition process with chloride anion, and the reversible photo-responsiveness is demonstrated upon exposing a solution to UV light irradiation. Finally, the intermediate I–azo–NH₂ also shows a pronounced color change due to pH variation. These azobenzenes are thereby attractive building blocks to design future multi-stimuli responsive materials for highly functional devices.     

Zur Anionenselektivität von Distannylderivaten in Membranen

Anion-Selectivity of Distannyl Derivatives in Membranes A series of distannyl derivatives (2,2-bis(trimethylstannyl)-1,3-dithiane, 2,2-bis(tributylstannyl)-1,3-dithiane, hexamethyldistannane, hexabutyldistannane, hexaphenyldistannane, bis(triphenylstannyl)sulfide, o-bis(trimethylstannyl)benzene) has been studied in view of their applicability as anion-selective ionophores in solvent polymeric membranes. None of these compounds induces significant changes in the anion-selectivity pattern as compared with the membranes containing no organotin compound. Representatives with tributylstannyl groups, however, undergo chemical reactions leading to highly active anion ionophores of the type Bu₃SnX, several of which (e.g. Bu₃SnCl and Bu₃SnOH) may be present in equilibrium in the membrane phase depending on the measuring conditions.     

Cobalt-catalysed asymmetric hydrovinylation of 1,3-dienes

In the presence of bidentate 1,n-bis-diphenylphosphinoalkane-CoCl₂ complexes {Cl₂Co[P ∼ P]} and Me₃Al or methylaluminoxane, acyclic (E)-1,3-dienes react with ethylene (1 atmosphere) to give excellent yields of hydrovinylation products. The regioselectivity (1,4- or 1,2-addition) and the alkene configuration (E- or Z-) of the resulting product depend on the nature of the ligand and temperature at which the reaction is carried out. Cobalt(ii)-complexes of 1,1-diphenylphosphinomethane and similar ligands with narrow bite angles give mostly 1,2-addition, retaining the E-geometry of the original diene. Complexes of most other ligands at low temperature (–40 °C) give almost exclusively a single branched product, (Z)-3-alkylhexa-1,4-diene, which arises from a 1,4-hydrovinylation reaction. A minor product is the linear adduct, a 6-alkyl-hexa-1,4-diene, also arising from a 1,4-addition of ethylene. As the temperature is increased, a higher proportion of the major branched-1,4-adduct appears as the (E)-isomer. The unexpectedly high selectivity seen in the Co-catalysed reaction as compared to the corresponding Ni-catalysed reaction can be rationalized by invoking the intermediacy of an η⁴-[(diene)[P ∼ P]CoH]⁺-complex and its subsequent reactions. The enhanced reactivity of terminal E-1,3-dienes over the corresponding Z-dienes can also be explained on the basis of the ease of formation of this η⁴-complex in the former case. The lack of reactivity of the X₂Co(dppb) (X = Cl, Br) complexes in the presence of Zn/ZnI₂ makes the Me₃Al-mediated reaction different from the previously reported hydroalkenylation of dienes. Electron-rich phospholanes, bis-oxazolines and N-heterocyclic carbenes appear to be poor ligands for the Co(ii)-catalysed hydrovinylation of 1,3-dienes. An extensive survey of chiral ligands reveals that complexes of DIOP, BDPP and Josiphos ligands are quite effective for these reactions even at –45 °C and enantioselectivities in the range of 90–99% ee can be realized for a variety of 1,3-dienes. Cobalt(ii)-complex of an electron-deficient Josiphos ligand is especially active, requiring only <1 mol% catalyst to effect the reactions.     

X-ray Structures and Computational Studies of Two Bioactive 2-(Adamantane-1-carbonyl)-N-substituted Hydrazine-1-carbothioamides

Two biologically active adamantane-linked hydrazine-1-carbothioamide derivatives, namely 2-(adamantane-1-carbonyl)-N-(tert-butyl)hydrazine-1-carbothioamide) 1 and 2-(adamantane-1-carbonyl)-N-cyclohexylhydrazine-1-carbothioamide 2, have been synthesized. X-ray analysis was conducted to study the effect of the t-butyl and cyclohexyl moieties on the intermolecular interactions and conformation of the molecules in the solid state. X-ray analysis reveals that compound 1 exhibits folded conformation, whereas compound 2 adopts extended conformation. The Hirshfeld surface analysis indicates that the contributions of the major intercontacts involved in the stabilization of the crystal structures do not change much as a result of the t-butyl and cyclohexyl moieties. However, the presence and absence of these contacts is revealed by the 2D-fingerprint plots. The CLP–Pixel method was used to identify the energetically significant molecular dimers. These dimers are stabilized by different types of intermolecular interactions such as N–H···S, N–H···O, C–H···S, C–H···O, H–H bonding and C–H···π interactions. The strength of these interactions was quantified by using the QTAIM approach. The results suggest that N–H···O interaction is found to be stronger among other interactions. The in vitro assay suggests that both compounds 1 and 2 exhibit urease inhibition potential, and these compounds also display moderate antiproliferative activities. Molecular docking analysis shows the key interaction between urease enzyme and title compounds.     

Physicochemical and Functional Properties of 2S, 7S,and 11S Enriched Hemp Seed Protein Fractions

The hemp seed contains protein fractions that could serve as useful ingredients for food product development. However, utilization of hemp seed protein fractions in the food industry can only be successful if there is sufficient information on their levels and functional properties. Therefore, this work provides a comparative evaluation of the structural and functional properties of hemp seed protein isolate (HPI) and fractions that contain 2S, 7S, or 11S proteins. HPI and protein fractions were isolated at pH values of least solubility. Results showed that the dominant protein was 11S, with a yield of 72.70 ± 2.30%, while 7S and 2S had values of 1.29 ± 0.11% and 3.92 ± 0.15%, respectively. The 2S contained significantly (p < 0.05) higher contents of sulfhydryl groups at 3.69 µmol/g when compared to 7S (1.51 µmol/g), 11S (1.55 µmol/g), and HPI (1.97 µmol/g). The in vitro protein digestibility of the 2S (72.54 ± 0.52%) was significantly (p < 0.05) lower than those of the other isolated proteins. The intrinsic fluorescence showed that the 11S had a more rigid structure at pH 3.0, which was lost at higher pH values. We conclude that the 2S fraction has superior solubility, foaming capacity, and emulsifying activity when compared to the 7S, 11S, and HPI.     

Asymmetric synthesis of a chiral hetero-bidentate As–P ligand containing both As and P-stereogenic centres

The organopalladium complex containing ortho-metalated (S)-[1-(dimethylamino)ethyl]naphthalene as the chiral auxiliary has been used as the chiral template to promote the asymmetric cycloaddition reaction between phenyldivinylphosphine and 3,4-dimethyl-1-phenylarsole. The reaction was completed in 1 h at room temperature, with the formation of two isomeric cycloadducts in the ratio 1:3. The major phenylvinylphosphino-substituted asymmetrical hetero-bidentate arsanorbornene ligand with chirality residing on both As and P centers was obtained stereoselectively on the chiral palladium template in moderate yield. The chiral heterobidentate ligand was isolated in its enantiomerically pure form by removal of the chiral auxiliary using concentrated hydrochloric acid and subsequent cleavage from the neutral complex [(As–P)PdCl₂] by using potassium cyanide. Similar to the earlier reported analogous diphenylphosphino-substituted asymmetrical heterobidentate arsanorbornene (As–P) ligand, an arsenic elimination process was also found in the dichloro and dibromo palladium complex whereas the diiodo species did not show similar reactivity, but the corresponding η² diiodo complex could be obtained from the η² dibromo complex by treatment with sodium iodide.     

Polyfunctional macroheterocycles. 1. Synthesis of sulfur-containing macroheterocycles with endocyclic amido or sulfonamido groups

The reaction of 1,8-diamino-, 1,8-bis(2-carbomethoxyethylamino)-, and 1,8-bis(2-phenylethylamino)-3,6-dithiaoctanes and 1,2-bis(2-aminoethylthiomethyl)-4,5-dimethylbenzene with adipic, phthalic, and terephthalic acid dichlorides leads to the corresponding sulfur-containing macrocyclic diamines. Macrocycles that contain endocyclic sulfonamido groups are formed in the reaction of benzene-1,3-disulfonic acid dichloride with hexamethylenediamine and 1,8-bis(2-carbomethoxyethylamino)-3,6-dithiaoctane. The oxidation of 9,10-benzo-8,11-dioxo-7,12-bis-(2-carbomethoxyethyl)-1,4-dithia-7,12-diazacyclotetradec-9-ene with 30% hydrogen peroxide was studied.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 7, pp. 995–998, July, 1988.     

1,4-addition of lithiated derivatives from 1,3-dithianes to α-unsaturated aldehydes : A way to δ-carbonyl aldehydes

1,4-Addition of the lithiated derivatives of the 1,3-dithiane and 2-phenyl-1,3-dithiane on α-unsaturated aldehydes is performed in THF-HMPA ; this reaction could be an interesting way to δ-carbonyl aldehydes.     

An efficient method for synthesis of organophosphorus compounds in aqueous media

A convenient and facile one-pot synthesis of stable phosphorus ylides and 1,4-diionic organophosphorus compounds is reported by the reaction of triphenylphosphine,dialkylacetylenedicarboxylates and N-H,C-H or S-H acids in the presence of polyethyleneglycol (PEG),β-cyclodextrin(β-CD),glycerine(Gly) or ethyleneglycol(EG) in water.This methodology is of interest due to the use of water as a solvent,thus minimizing the cost operational hazards,and environmental pollution.     

Isolation,Characterization, Complete Structural Assignment,and Anticancer Activities of the Methoxylated Flavonoids from Rhamnus disperma Roots

Different chromatographic methods including reversed-phase HPLC led to the isolation and purification of three O-methylated flavonoids; 5,4’-dihydroxy-3,6,7-tri-O-methyl flavone (penduletin) (1), 5,3’-dihydroxy-3,6,7,4’,5’-penta-O-methyl flavone (2), and 5-hydroxy-3,6,7,3’,4’,5’-hexa-O-methyl flavone (3) from Rhamnus disperma roots. Additionlly, four flavonoid glycosides; kampferol 7-O-α-L-rhamnopyranoside (4), isorhamnetin-3-O-β-D-glucopyranoside (5), quercetin 7-O-α-L-rhamnopyranoside (6), and kampferol 3, 7-di-O-α-L-rhamnopyranoside (7) along with benzyl-O-β-D-glucopyranoside (8) were successfully isolated. Complete structure characterization of these compounds was assigned based on NMR spectroscopic data, MS analyses, and comparison with the literature. The O-methyl protons and carbons of the three O-methylated flavonoids (1–3) were unambiguously assigned based on 2D NMR data. The occurrence of compounds 1, 4, 5, and 8 in Rhamnus disperma is was reported here for the first time. Compound 3 was acetylated at 5-OH position to give 5-O-acetyl-3,6,7,3’,4’,5’-hexa-O-methyl flavone (9). Compound 1 exhibited the highest cytotoxic activity against MCF 7, A2780, and HT29 cancer cell lines with IC₅₀ values at 2.17 µM, 0.53 µM, and 2.16 µM, respectively, and was 2–9 folds more selective against tested cancer cell lines compared to the normal human fetal lung fibroblasts (MRC5). It also doubled MCF 7 apoptotic populations and caused G₁ cell cycle arrest. The acetylated compound 9 exhibited cytotoxic activity against MCF 7 and HT29 cancer cell lines with IC₅₀ values at 2.19 µM and 3.18 µM, respectively, and was 6–8 folds more cytotoxic to tested cancer cell lines compared to the MRC5 cells.     

Identification and Characterization of a Novel Endo-β-1,4-Xylanase from Streptomyces sp. T7 and Its Application in Xylo-Oligosaccharide Production

A xylanase-producing strain, identified as Streptomyces sp. T7, was isolated from soil by our lab. The endo-β-1,4-xylanase (xynST7) gene was found in the genome sequence of strain T7, which was cloned and expressed in Escherichia coli. XynST7 belonged to the glycoside hydrolase family 10, with a molecular mass of approximately 47 kDa. The optimum pH and temperature of XynST7 were pH 6.0 and 60 °C, respectively, and it showed wide pH and temperature adaptability and stability, retaining more than half of its enzyme activity between pH 5.0 and 11.0 below 80 °C. XynST7 showed only endo-β-1,4-xylanase activity without cellulase- or β-xylosidase activity, and it showed maximal hydrolysis for corncob xylan in all the test substrates. Then, XynST7 was used for the production of xylo-oligosaccharides (XOSs) by hydrolyzing xylan extracted from raw corncobs. The maximum yield of the XOS was 8.61 ± 0.13 mg/mL using 15 U/mL of XynST7 and 1.5% corncob xylan after 10 h of incubation at 60 °C. The resulting hydrolysate products mainly consisted of xylobiose and xylotriose. These data indicated that XynST7 might by a promising tool for various industrial applications.