高分子化Si桥联茂金属催化剂的合成及其催化乙烯聚合反应

合成了硅桥上含乙烯基团的硅桥联茂金属催化剂[(CH_2=CH)CH_3Si(C_5H_4) _2]ZrCl_2 (3)，并通过IR, ~1H NMR对化合物进行了表征，3在AIBN的引发下与苯 乙烯共聚形成高分子化的茂金属催化剂4。研究了3和4对乙烯聚合的能力，考察了 n(Al)/n(Zr)'温度对催化剂活性的影响。     

负载双核茂金属催化剂催化乙烯聚合反应动力学研究

以SiO2为载体,制备了负载的双核茂金属[（η5-C5H5）Zr Cl2]2[μ,μ-（SiMe2）2（η5-allyl C5H2）2]/MAO/SiO2催化剂,以己烷为溶剂进行了淤浆条件下乙烯聚合反应,研究了扩散因素、乙烯聚合压力和聚合温度对乙烯淤浆聚合动力学参数的影响,测定了聚合反应级数和表观活化能,采用动力学和相对分子质量法计算了负载催化剂的活性中心浓度,并对链增长速率常数等动力学参数进行了计算.结果表明,以负载双核茂金属催化剂催化乙烯淤浆聚合反应速率对单体浓度呈1.11级依赖,反应活化能Ea为72.47 kJ/mol,活性中心浓度C＊为0.33 mol/mol,链增长速率常数Kp为1.06×106L.（mol.h）-1.     

Dialkylzinc Compounds as Chain Transfer Agents in Ethylene and Propylene Polymerizations Catalyzed by Metallocene Catalysts

Dialkylzinc compounds (ZnR₂) with the alkyl groups of different steric hindrance were used as chain transfer agents in ethylene and propylene polymerizations catalyzed by two conventional metallocene catalysts including rac-Et(Ind)₂ZrCl₂ and rac-Me₂Si[2-Me-4-Ph-Ind]₂ZrCl₂. In general, catalyst activities for ethylene polymerizations are barely affected by chain transfer agents, regardless of the R type; however, there are significant activity reductions in propylene polymerizations when the R in ZnR₂ is less hindered, and as R becomes bulkier, catalyst activities are gradually restored. ZnR₂ and metallocene catalyst active sites tend to form a reversible and catalytically inactive complex, thus, the geometry congested ZnR₂ would reduce complex formation tendency and hence, decrease its negative effect on catalyst activities.     

Dialkylzinc Compounds as Chain Transfer Agents in Ethylene and Propylene Polymerizations Catalyzed by Metallocene Catalysts

Dialkylzinc compounds (ZnR₂) with the alkyl groups of different steric hindrance were used as chain transfer agents in ethylene and propylene polymerizations catalyzed by two conventional metallocene catalysts including rac-Et(Ind)₂ZrCl₂ and rac-Me₂Si[2-Me-4-Ph-Ind]₂ZrCl₂. In general, catalyst activities for ethylene polymerizations are barely affected by chain transfer agents, regardless of the R type; however, there are significant activity reductions in propylene polymerizations when the R in ZnR₂ is less hindered, and as R becomes bulkier, catalyst activities are gradually restored. ZnR₂ and metallocene catalyst active site tend to form a reversible and catalytically inactive complex, thus the geometry congested ZnR₂ would reduce complex formation tendency and hence decreased its negative effect on catalyst activities.     

有机/无机复合载体负载茂金属催化剂的制备和乙烯聚合

苯乙烯/丙烯酰胺共聚物;SiO2载体;有机/无机复合载体负载茂金属催化剂的制备和乙烯聚合     

三氟化硼修饰载体负载茂金属催化乙烯聚合

用BF3对载体硅胶和氧化铝进行了表面修饰,考察了修饰的载体负载茂金属催化剂后催化乙烯聚合的特性.研究表明,用BF3修饰过的载体负载二氯二茂锆催化乙烯的聚合,聚合活性有较大提高,具有工业应用前景,并且提出了这一催化体系的负载机理.     

新型聚合物载体茂金属催化剂

均相茂金属催化剂虽然有许多优点和特点,但也存在着某些不足之处,例如,不适于现在通用的气相和淤浆聚合工艺;要想达到足够的聚合活性需大量价格昂贵的MAO;相当多的均相茂金属催化剂不适于高温聚合（活性降低,分子极低）,不能很好地控制聚合物的形态,为了在工业上得到实际应用,必须将它们载体（非均相）化。通常采用的载体都是无机物,如SiO2、MgCl2、Al2O3等。由于无机载体表面具有酸性,负载茂金属催化剂活性有所降低,用聚合和作茂金属催化剂的载体很少有报道,我们研制了一种新型的聚合物载体茂金属催化剂,即可保持均相茂金属催化特点和优点,又能克服其缺点。其合成路线如下。     

A New Type of Polymer-Supported Metallocene Catalyst for Ethylene Polymerization

Although homogeneous metallocene catalysts show some specific characteristics, such as single site, extremely high catalytic activity, high ability to incorporate monomers, narrow molecular weight and comonomer distribution, and excellent control of stereoregularity, but they also suffer some drawbacks, a very large amount of MAO requirement, inability to be used in slurry or gas phase processes, and poor control of polymer morphology. Therefore, it is necessary to modify the catalysts for the…     

Improving the Performance of Heterogeneous Borane Cocatalysts by Pretreatment of the Silica Support with Alkylaluminum Compounds

The treatment of silica with alkylaluminum compounds, triisobutylaluminum (TIBA) and triethylaluminum (TEA), dramatically enhanced the cocatalytic performances of the [CPh₃]⁺[B(C₆F₅)₃—SiO₂]^–. We measured the productivity and ethylene‐consumption profiles for [CPh₃]⁺[B(C₆F₅)₃—SiO₂]^– cocatalysts and Cp₂ZrCl₂/TIBA. Both of the treated cocatalyst systems improved the average molecular weight of the product when compared with the untreated cocatalyst system. The TIBA‐treated cocatalyst provided a narrow molecular weight distribution while the TEA‐treated cocatalyst system gave a broad distribution.     

Influence of Metallocene Type on the Order of Ethylene Polymerization and Catalyst Deactivation Rate in a Solution Reactor

The solution polymerization of ethylene using rac-Et(Ind)₂ZrCl₂/MAO and (Dimethylsilyl(tert-butylamido)(tetramethyl- cyclopentadienyl)titanium Dichloride)(CGC-Ti)/MAO was studied in a semi-batch reactor at 120 °C under different monomer pressures and catalyst concentrations. The kinetics of ethylene polymerization with rac-Et(Ind)₂ZrCl₂/MAO can be described with first order reactions for polymerization and catalyst deactivation. When (CGC-Ti)/MAO is used, however, second order kinetics are observed for catalyst decay and the order of polymerization changes from 2 to 1 with increasing ethylene pressure.     

茂金属/硼化合物烯烃聚合催化体系研究进展

本文介绍了茂金属? 硼化合物催化体系最新研究进展, 从催化体系的活性中心、聚合机理、新的茂金属及硼化物体系、它们对烯烃及极性单体的催化聚合等方面作了较详细阐述。     

Ethylene Polymerization by Metallocene Catalysts Supported over Siliceous Materials with Bimodal Pore Size Distribution

Summary: As known, the pore structure of the catalytic support plays a decisive role during the polymerization reactions determining intra-particle mass and heat transport phenomena. In this work, several ethylene polymerizations have been carried out by using as catalytic support different mesostructured materials with unimodal and bimodal pore size distributions in order to evaluate the influence of this pore size distribution on the catalytic behavior. Calcined mesoporous materials were impregnated with the catalytic system MAO/(nBuCp)₂ZrCl₂ and used for ethylene polymerization and ethylene/1-hexene copolymerizations, at 70 °C and 5 bar of ethylene pressure. Polyethylenes obtained were characterized by GPC, DSC and Crystaf. Results indicate that porous structure of the support has a significant influence on polymerization activity and polymer properties. Despite the catalyst bimodal pore size distribution, only ethylene/1-hexene copolymers presented a bimodal chemical composition distribution.     

Characteristics of Titanocene Catalyst Supported on Palygorskite for Ethylene Polymerization

Due to the technical problems observed for homogeneous metallocene catalysts, such as reactor fouling and requirement for large amount of expensive methylaluminoxane (MAO) as cocatalyst, the development of supported metallocene catalysts is very important…     

Heat Transfer in Gas Phase Olefin Polymerisation

A fixed bed microreactor has been used to study heat transfer during the initial transient state of gas phase olefin polymerization on a supported catalyst. It has been shown that heat transfer during this stage of the polymerisation is critical, and under conditions found commercially problems can arise with hot spots and polymer melting. It is proven how the thermal properties of the gas mixture flowing on the catalytic bed exert great influence on heat dissipation reducing the sudden increase in temperature by as much as a factor of 5. Flow rate and especially the process gas composition are the key factors in controlling the bed temperature.     

双（环戊二烯基）二氯化锆载体催化剂催化乙烯／α—烯烃共聚合

合成了３种Ｚｒ／甲基铝氧烷（ＭＡＯ）／ＳｉＯ２型载体催化剂，考察了不同ＭＡＯ投料量对载锆反应及催化活性的影响，研究了乙烯聚合及乙烯／α－烯烃共聚合，结果表明，该催化剂对己烯和辛烯有很强的共聚作用，而对癸烯的共聚能力较弱，解释了α－烯烃碳链增长对乙烯／α－烯烃共聚催化活性的影响，ＳＥＭ分析表明，α－烯烃的加入有利于聚合物形态原改善。     

The Role of the Support in the Performance of Grafted Metallocene Catalysts

A series of supports – differing in their textural properties, the nature of their surface sites, and in their crystallinities – were investigated in the sequential grafting reaction of Cp₂ZrCl₂ and (nBuCp)₂ZrCl₂ mixtures. The catalyst systems were analyzed by Rutherford backscattering spectrometry, AFM, EXAFS, and nitrogen adsorption. All systems were shown to be active in ethylene polymerization reactions when methylaluminoxane was used as the cocatalyst. Experimental results are discussed in terms of the relationships between the grafted metal content, the catalyst activity, the surface roughness and polarity, the interatomic Zr–C and Zr–O distances of the grafted species and the molecular weights of the resulting polyethylenes.

     

介孔二氧化硅负载磷钨杂多酸催化合成聚四氢呋喃

采用浸渍法制备了介孔二氧化硅(SiO2)负载的磷钨杂多酸(PW12)催化剂(PW12/SiO2),其物化性质和表面酸强度经BET,IR,TG-DTG和Hammett指示剂法表征.以PW12/SiO2催化四氢呋喃开环聚合合成聚四氢呋喃(PTHF),考察了PW12的负载量[w(PW12)]和焙烧温度对催化剂活性的影响.实验结果表明,在w(PW12)为35.0%,于230 ℃焙烧活化3 h的条件下制备的催化剂(35Cat)活性最高.以35Cat为催化剂,用量占反应物总质量的15.0%时,PTHF收率达60.2%.     

Surface Coordination Polymerization of Ethylene by Hydrozirconation‐Immobilized Metallocene

Hydrozirconation on vinyl‐terminated substrates (silicon wafer and nanosilica sphere) is employed as an efficient way for immobilization of zirconocene catalyst through Zr C bonds, which is applied in surface coordination ethylene polymerization producing surface‐tethered polyethylene (PE). The formation of Zr C σ bond induced by hydrozirconation provides an initiator precursor for growing a layer of PE covalently linked onto substrates. The results from SEM, AFM, and TEM show that the surface polymerization is controlled by hydrozirconation. Surface pattern or core–shell structure with crystalline PE coating can be formed, when silicon wafer is selectively functionalized with vinyl‐groups or vinyl‐modified nanosilica is applied. It is believed that hydrozirconation for the synthesis of zirconocene initiator can be a versatile route to prepare polyolefin hybrid materials.