Comprehensive and High-Throughput Exploration of Chemical Space Using Broadband 19F NMR-Based Screening

Fragment-based lead discovery has become a fundamental approach to identify ligands that efficiently interact with disease-relevant targets. Among the numerous screening techniques, fluorine-detected NMR has gained popularity owing to its high sensitivity, robustness, and ease of use. To effectively explore chemical space, a universal NMR experiment, a rationally designed fragment library, and a sample composition optimized for a maximal number of compounds and minimal measurement time are required. Here, we introduce a comprehensive method that enabled the efficient assembly of a high-quality and diverse library containing nearly 4000 fragments and screening for target-specific binders within days. At the core of the approach is a novel broadband relaxation-edited NMR experiment that covers the entire chemical shift range of drug-like ¹⁹F motifs in a single measurement. Our approach facilitates the identification of diverse binders and the fast ligandability assessment of new targets.     

Copolymerization of α-Methylstyrene and Styrene

In this paper, the effects of temperature from 60 °C to 80 °C and the molar ratios in monomer feed on the copolymerization of α-methylstyrene(AMS) and styrene(St) were studied. The resulting copolymers, designated as PAS, were characterized by FTIR, GPC, NMR and TGA. When the reaction temperature was below 75 °C, the molecular weights increased almost linearly as the evolution of the copolymerization. The phenomenon revealed that AMS could mediate the conventional free radical polymerization having some features of a controlled system. As the AMS/St = 50/50(molar) in feed, the overall fraction of the AMS unit incorporated into the copolymer was as high as 42 mol%, the monomer conversion could be more than 90 wt% and the molecular weights could reach as high as 4400. However, since the styrene is more reactive than AMS, the AMS fraction in copolymer increased with the overall monomer conversion. The 13C-NMR revealed the products were random copolymers which had triads, such as-AMS-AMS-AMS-,-St-AMS-AMS-(-AMS-AMS-St-) and-St-AMS-St-. TGA curves demonstrated that the degradation temperature of the resulting copolymers went down from about 356.9 °C(0 mol% AMS) to 250.2 °C(42 mol% AMS). This behavior demonstrated that there exist weak bonds in the AMScontaining sequences which could be used as potential free radical generators.     

Free-radical addition of 2-pyrrolidinone to α-olefins

Summary When reaction is initiated with t-butyl peroxide, 2-pyrrolidinone reacts with -olefins with formation of mixtures of 3- and 5-alkyl-2-pyrrolidinones with the latter isomer in the predominating amount.This article is published in accordance with a resolution of the Conference of Chief Editors of Journals of the Academy of Sciences of the USSR of July 12, 1962, as a dissertation paper by G. I. Nikishin.Translated from Izvestiya Akademii Nauk SSSR, Seria Khimicheskaya, No. 10, pp. 1843–1847, October, 1964     

Ethylene polymerization catalyzed by Pd-based β-ketoiminato complexes/MAO systems

The substituted β-ketoiminato palladium(II) complexes, Pd[CH₃C(O)CHC(NAr)CH₃](Pph₃)(Me) (1 Ar = α-napthyl, 2 Ar = fluorenyl), can be prepared from the reaction of (COD)PdMeCl and Pph₃ with the appropriate ligand. After activation of 1 and 2 with methylaluminoxane (MAO), the resulting palladium(II) complexes are used as catalysts for ethylene polymerization, yielding linear polyethylene. The effects of temperature, co-catalyst to catalyst molar ratio and polymerization time on catalyst activities are reported. The catalyst activity decreases above −20 °C due to catalyst deactivation and optimum co-catalyst to catalyst ratio is 300:1.     

Ethylene–Norbornene Copolymerization by Rare-Earth Metal Complexes and by Carbon Nanotube-Supported Metallocene Catalysis

E–N copolymerization with a number of half-sandwich rare-earth metal compounds [M(η5-C₅Me₄SiMe₂R)(η1-CH₂SiMe₃)₂(L)] (M = Sc, Y, Lu) has been achieved. Mainly atactic alternating E N copolymers are obtained with all catalytic systems. Interestingly, copolymers arising from [Sc(η5-C₅Me₄SiMe₂C₆F₅)(η¹-CH₂SiMe₃)₂(THF)]/[/[Ph₃C][B(C₆F₅)₄] possess narrower molar mass distributions than those from [Sc(η⁵-C₅Me₄SiMe₃)(η¹-CH₂SiMe₃)₂(THF)] / [Ph₃C][B(C₆F₅)₄]. In addition, homogeneous surface coating of multi-walled carbon nanotubes is accomplished for the first time by in situ E–N copolymerization as catalyzed by rac-Et(Ind)₂ZrCl₂/MMAO-3A anchored onto the carbon nanotube surface. The copolymerization reaction allows for the destructuration of the native nanotube bundles. The relative quantity of E N copolymer can be tuned up as well as the norbornene content in the formed copolymers and accordingly their glass transition temperature. By melt blending with an ethylene-vinyl-co-acetate copolymer (27 wt.-% vinyl acetate comonomer) matrix, high performance polyolefinic nanocomposites are obtained.     

Cationic Copolymerization with Depropagation. The Copolymerization of α-Methylstyrene and Styrene

ABSTRACT

To evaluate the existence of the depropagation reaction in the copolymerization of vinyl monomers, the cationic copolymerization of α-methylstyrene with styrene was studied. The copolymer composition exhibited an extensive dependency on the temperature of polymerization and the monomer concentration, this fact not being explained by the Mayo-Lewis equation. Treatment of the copolymerization in terms of the depropagation reaction led to an estimate of the monomer reactivity ratio and the equilibrium constant between the polymer and the monomer of α-methylstyrene. A comparison of the equilibrium constants thus obtained with those reported in the literature indicates that the magnitude of the equilibrium constants depends on the sequence length of α-methylstyrene units. By extrapolation to long sequence length, the equilibrium constants approach the values which are reported for high molecular weight poly(α-methylstyrene).     

High-Throughput Synthesis and Characterization of Aryl Silicones by Using the Piers–Rubinsztajn Reaction

Arylsilicones are widely exploited for their thermal and optical properties. The creation of phenylsilicone elastomers with specific physical properties is typically done by a “one-off” formulation and test process. Herein, it is demonstrated that high-throughput synthesis methods can be used to rapidly prepare a series of arylsilicone elastomers and then the relative impact of different aryl groups on their physical properties is assessed. Aromatic groups were incorporated into polydimethylsiloxane (PDMS) elastomers by exploiting the relative reactivity of different functional groups in the Piers–Rubinsztajn reaction. To analyze trends in the silicone mechanical properties as a function of increasing aryl concentration—structure/property relationships—libraries of elastomers were both quickly synthesized and characterized by using high-throughput suites starting from low viscosity silicone oils/monomers in 96-well plates. Liquid handling parameters were optimized to effectively work with the silicones. Incorporating aryl instead of alkyl crosslinkers into the PDMS backbone increased the silicone elastomer modulus by approximately 50 % (at a crosslink density of 6 %); elastomers prepared with an aromatic crosslinker with three contact points led to much higher moduli compared with those with one contact point at the same crosslink density. When located at precise rather than random points on the silicone chains, diphenylsilicones had lower moduli than analogous monophenylsilicones.     

Copolymers from α-Pinene. 2. Cationic Copolymerization of Styrene and α-Pinene

A study of the copolymerization of α-pinene and styrene has been carried out at 10°C using anhydrous AlCl₃ as the initiator. It is found that styrene forms copolymer with α-pinene at all mono-meric ratios. A copolymer of 2320–3080 molecular weight is obtained. The softening range of the copolymer is 82 to 85°C. The copolymers are of commercial value.     

An Efficient Synthesis and Screening of Osteostatin analogues by Using Pooling Strategy

Resistancetoenzymatichydrolysisisveryimportantforthedevelopmentofendogenicpeptide-baseddrugs.Previousstudies]'2haverevealeditispossiblethatpartiallystructuremodifiedanaloguescouldnotonlyretaintheirbiologicalactivitybutpreventmetabolismofadjacentaswellasremotepeptidebondsalso.However,tosynthesizeandscreenlargenumberofanaloguesisalwaysalaborioustask.TheideaofcombinatorialchemistrysuchastheSPlit-Mixmethod3,amajorstrategyforhighthroughputsynthesis,isverysuitableforpreparinglargesizedlibrariesofch…     

Effects of Al(i-Bu)_3 on Propylene Polymerization and Copolymerization by rac-Me_2Si(Ind)_2ZrCl_2/MAO

Propylenepolymerizationbystereorigidansa-Inetallocene/meUlyI-alulhinoxane(MAO)havebeenreportedbymanygroupsinrecentyears."'PolypropylenefromsuchSystemhasthechacteristicsofnarrowmolecularweightandcompositiondistributions,whichcannotbeproducedbytheconditionalheterogeneousZiegler-Nattacatalysts.Inarecentwork,M.C.SacchietaLrepoftedUleeffectsofaddingAl(i-C4Hg)3ahA)totherac-Et(Ind)ZZrCI,/MAOcatalyzedpropylene/1-hexenecopolymerizationSystem.'ItwasfoundthatbyaddingcertainamountsofTBAhlepoly…     

Copolymerization of Ethylene/1-Butene with Heterogeneous TiCl4/(α-Diimine)nickel(Ⅱ) Complex Combined Catalyst

The new type heterogeneous combined catalyst system TiCl4-(α-diimine)nickel(Ⅱ) complexes/MgCl2-SiO2/AlR3 was prepared. Ethylene and 1-butene were copolymerized with the catalysts in slurry phase. It was found that with combined catalyst, the copolymers with lower density and higher branched degree were obtained. 13CNMR results showed that in the obtained copolymers existed not only ethyl but also some other kinds of branches due to the fact that ethylene exhibits the behavior of oligomerization and copolymerization in-situ with combined catalysts.     

A new route of the reaction of EtAlCl2 with α-olefins catalyzed by Ti complexes

A new method for the synthesis of dialkyl(ethyl)alanes by the reaction of EtAlCl₂ with -olefins in the presence of Mg and a catalytic amount of Cp₂TiCl₂ (Ti(OPrⁱ)₄, Ti(OBuⁿ)₄) in THF was developed.     

An unusual new reaction of α-olefins with magnesiumn-alkyl derivatives catalyzed by Cp2ZrCl2

The reaction of organomagnesium compounds (OMC) containing alkyl radicals of normal structure with -olefins, resulting in the formation of alkenylorganomagnesium compounds and accompanied by hydride transfer was discovered and systematically investigated. A scheme providing for the formation of zirconacyclopentane complexes was proposed for the mechanism of the reaction.Institute of Organic Chemistry, Ural Branch, Russian Academy of Sciences, 450054 Ufa. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 5, pp. 1187–1196, May, 1992.     

PMA/SiO2: An Efficient and Reusable Heterogeneous Catalyst for the Synthesis of β-Acetamidocarbonyl Compounds by Multicomponent Reaction

Phosphomolybdic acid supported on silica (PMA/SiO₂) has been used as an efficient heterogeneous catalyst for the preparation of β-acetamidoketones and esters in good yields. The reaction conditions are mild, and the catalyst can be recycled.     

Ethylene polymerization on a SiH4-modified Phillips catalyst: detection of in situ produced α-olefins by operando FT-IR spectroscopy

Ethylene polymerization on a model Cr(II)/SiO(2) Phillips catalyst modified with gas phase SiH(4) leads to a waxy product containing a bimodal MW distribution of α-olefins (M(w) < 3000 g mol(-1)) and a highly branched polyethylene, LLDPE (M(w) ≈ 10(5) g mol(-1), T(m) = 123 °C), contrary to the unmodified catalyst which gives a linear and more dense PE, HDPE (M(w) = 86,000 g mol(-1) (PDI = 7), T(m) = 134 °C). Pressure and temperature resolved FT-IR spectroscopy under operando conditions (T = 130-230 K) allows us to detect α-olefins, and in particular 1-hexene and 1-butene (characteristic IR absorption bands at 3581-3574, 1638 and 1598 cm(-1)) as intermediate species before their incorporation in the polymer chains. The polymerization rate is estimated, using time resolved FT-IR spectroscopy, to be 7 times higher on the SiH(4)-modified Phillips catalyst with respect to the unmodified one.     

Preparation of Core/Shell Structure of α-Al(OH)3-SiO2 by Heterogeneous Nucleation-and-Growth Processing

In order to solve the difficult problem of heterogeneity of different components in the procedure of ceramic preparation, a novel processing (heterogeneous nucleation-and-growth processing) was used to prepare homogeneous distribution powders. Composite coating particles consisting of alpha aluminum hydroxide (-Al(OH)₃) cores (average particle size 0.42 m) with outer homogeneous amorphous silica layer are prepared by heterogeneous nucleation-and-growth processing. Effects of silica content in composite coating particles versus concentration of silicon tetraethoxide (TEOS), pH value, time and temperature are studied. The homogeneous amorphous silica layer on cores is confirmed by X-ray diffraction, transmission electron microscopy and zeta potential measurement.