Effects of Grafting Density and Film Thickness on the Adhesion of Staphylococcus epidermidis to Poly(2‐hydroxy ethyl methacrylate) and Poly(poly(ethylene glycol)methacrylate) Brushes

Thin polymer films that prevent the adhesion of bacteria are of interest as coatings for the development of infection‐resistant biomaterials. This study investigates the influence of grafting density and film thickness on the adhesion of Staphylococcus epidermidis to poly(poly(ethylene glycol)methacrylate) (PPEGMA) and poly(2‐hydroxyethyl methacrylate) (PHEMA) brushes prepared via surface‐initiated atom transfer radical polymerization (SI‐ATRP). These brushes are compared with poly(ethylene glycol) (PEG) brushes, which are obtained by grafting PEG onto an epoxide‐modified substrate. Except for very low grafting densities (ρ = 1%), crystal violet staining experiments show that the PHEMA and PPEGMA brushes are equally effective as the PEG‐modified surfaces in preventing S. epidermis adhesion and do not reveal any significant variations as a function of film thickness or grafting density. These results indicate that brushes generated by SI‐ATRP are an attractive alternative to grafted‐onto PEG films for the preparation of surface coatings that resist bacterial adhesion.

     

结构规整的高密度两亲性接枝聚合物刷的合成及其自组装研究

大分子单体通过两种可控聚合方法, 即开环易位聚合(ROMP)和原子转移自由基聚合(ATRP)的联用, 合成一种新型两亲性接枝聚合物刷. 具有高环张力的降冰片烯单侧链大分子单体norbornene-graft-poly(ε-caprolactone)/Br (PCL- NBE-Br)首先进行ROMP反应, 生成聚合物主链, 每个单体单元上含有一条PCL链和一个溴官能团; 然后用含溴的ROMP聚合物poly(norbornene)-graft-poly(ε-caprolactone)/Br (PCL-PNBE-Br)作为大分子引发剂引发单体2-(dimethyl- amino)ethyl methacrylate)的ATRP反应, 生成结构明确的高密度两亲性接枝聚合物刷poly(norbornene)-graft-poly(ε- caprolactone)/poly(2-(dimethylamino)ethyl methacrylate) (PCL-PNBE-PDMAEMA), 其主链每个单体单元上均含有一条疏水性PCL接枝链和一条亲水性PDMAEMA接枝链. 最后, 研究此类高密度两亲性接枝聚合物刷的自组装行为, 用动态激光光散射(DLS)研究其在混合溶剂(THF/H2O)中的胶束行为, 考察胶束溶液的浓度以及不同长度的亲水性接枝链对胶束尺寸的影响; 利用透射电镜(TEM)观察胶束为球形, 具有类似线团或草莓状的形态.     

Tuning Surface Wettability of Poly(3‐sulfopropyl methacrylate) Brushes by Cationic Surfactant‐Driven Interactions

In this communication, polyanionic poly(potassium 3‐sulfopropyl methacrylate) (PSPM) brushes were switched from hydrophilic to hydrophobic by exchange of the counter cations. First, poly(potassium 3‐sulfopropyl methacrylate) brushes were grown by means of atom transfer radical polymerization (ATRP) from thiol monolayers of initiating ω‐mercaptoundecyl bromoisobutyrate and mixed monolayers of thiol initiator and 1‐undecanothiol (blank thiol) attached to gold surfaces. The kinetics of the polymerization reaction were followed by means of the quartz microbalance technique with dissipation (QCM‐D). The collapse of PSPM brushes in the presence of cationic surfactants like quaternary ammonium salts (tetraethylammonium bromide, hexadecyltrimethylammonium bromide) and imidazolium salts (1‐dodecyl‐3‐methylimidazolium bromide, 1H,1H,2H,2H‐perfluoro‐1‐decyl‐3‐methylimidazolium bromide) was shown by QCM‐D. Water contact angle measurements proved that the wettability of the surface could be tuned reversibly from hydrophilic values (<30 °) to hydrophobic ones (>85 °).

     

原子转移自由基聚合(ATRP)制备高密度端羟基聚氧乙烯梳状嵌段聚合物

聚氧乙烯[Poly(ethylene glycol),PEG]是一种稳定、无毒且具有良好的生物惰性和非免疫性、非抗原性的水溶性聚合物,在生物医学和生物技术领域具有广泛的应用背景和重要的研究意义,大量研究表明,多臂的PEG由于其枝状结构具有比线型结构更好的性能,然而,通常多臂,PEG采用Corefirst阴离子开环聚合环氧乙烷的方法,这种方法对聚合条件及设备等要求较高,限制了多臂的PEG的应用。     

Antibacterial poly(ethylene terephthalate) surfaces obtained from thymyl methacrylate polymerization

Thymol, an antibacterial agent was used for the preparation of a methacrylic monomer. The conventional and atom transfer radical (ATRP) polymerizations of this monomer were studied using different conditions. Then, the functionalization of poly(ethylene terephthalate) (PET) films by “grafting from” ATRP using this monomer was investigated. In this aim, a three steps procedure was developed. The surfaces were first treated by NH₃ plasma treatment to incorporate primary amino functions. Then, in a second step, ATRP initiator was grafted by reaction with bromoisobutyryl bromide. Surface initiated ATRP of thymyl methacrylate was performed in solution in the presence of a sacrificial initiator. The efficiency of these reactions was confirmed by X‐ray photoelectron spectroscopy. Wetting properties and surface energy were found to vary systematically depending to the type of functionalization and grafting. The poly(thymyl methacrylate)‐grafted PET surfaces exhibit resistance to bacterial adhesion toward Pseudomonas aeruginosa, Listeria monocytogenes, and Staphylococcus aureus strains. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1975–1985     

High Molecular Weight Poly(butyl methacrylate) via ATRP Miniemulsions

Summary: The reverse atom transfer radical polymerization of butyl methacrylate in miniemulsion, initiated with the redox pair hydrogen peroxide/ascorbic acid and mediated with copper(II) bromide tris[2-di(2-ethylhexyl acrylate)aminoethyl]amine is capable of producing well-controlled high-molecular weight poly(butyl methacrylate).     

Stimuli‐Responsive Semi‐Fluorinated Polymer Brushes on Porous Silica Substrates

Summary: A diblock copolymer brush consisting of poly(methyl acrylate)‐block‐poly(pentafluoropropyl acrylate) (Si/SiO₂//PMA‐b‐PPFA) was synthesized on a porous silica substrate. The brush was exposed to selective solvents, as well as thermal treatments, to induce a surface rearrangement. The rearrangement resulted in the selective loss or creation of an ultrahydrophobic layer by location of the fluoropolymer segment. This work demonstrates that surface rearrangements observed on flat surfaces can be transferred to porous substrates.

Image of a water droplet in contact with an Si/SiO₂//PMA‐b‐PPFA ultrahydrophobic polymer brush, synthesized from a porous silica substrate.     

Synthesis of Comblike Poly（methyl methacrylate） by Atom Transfer Radical Polymerization with Poly（ethyl 2-bromoacrylate） as Macroinitiator

Comblike poly(methyl methacrylate) was synthesized by atom transfer radical polymerization of methyl methacrylate with poly(ethyl 2-bromoacrylate) as a macroinitiator, which was prepared by conventional free radical polymerization of ethyl 2-bromoacrylate. The obtained comblike polymers were characterized by GPC and ^1H NMR.     

Synthesis and self‐assembly of amphiphilic brush‐dendritic‐linear poly[poly(ethylene glycol) methyl ether methacrylate]‐b‐ polyamidoamine‐b‐poly(ε‐caprolactone) copolymers

A series of novel amphiphilic brush‐dendritic‐linear poly[poly(ethylene glycol) methyl ether methacrylate]‐b‐polyamidoamine‐b‐poly(ε‐caprolactone) copolymers (PPEGMEMA‐b‐D_m‐b‐PCL) (m = 1, 2, and 3: the generation number of dendron) were synthesized by the combination techniques of click chemistry, atom transfer radical polymerization (ATRP), and ring‐opening polymerization (ROP). The brush‐dendritic copolymers bearing hydrophilic brush PPEGMEMA and hydrophobic dendron polyamidoamine protected by the tert‐butoxycarbonyl (Boc) groups [D_m‐(Boc) (m = 1, 2, and 3)] were for the first time prepared by ATRP of poly(ethylene glycol) methyl ether methacrylate monomer (PEGMEMA) initiated with the dendron initiator, which was prepared from 2′‐azidoethyl‐2‐bromoisobutyrate (AEBIB) and D_m‐(Boc) terminated with a clickable alkyne by click chemistry. Then, the brush‐dendritic copolymers with primary amine groups (PPEGMEMA‐b‐D_m) were obtained from the removal of the protected Boc groups of the brush‐dendritic copolymers in the presence of trifluoroacetic acid. The brush‐dendritic‐linear PPEGMEMA‐b‐D_m‐b‐PCL copolymers were synthesized from ROP of ε‐caprolactone monomer using PPEGMEMA‐b‐D_m as the macroinitiators and stannous octoate as catalyst in toluene at 130 °C. To the best of our knowledge, this is the first report that integrates hydrophilic brush polymer PPEGMEMA with hydrophobic polyamidoamine (PAMAM) dendron and PCL to form amphiphilic brush‐dendritic‐linear copolymers. The amphiphilic brush‐dendritic‐linear copolymers can self‐assemble into spherical micellar structures in aqueous solution. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of oligo(ethylene glycol) methacrylate polymer brushes

Here we report a study into controlling the polymerization of mono-hydroxy and mono-methoxy terminated oligo(ethylene glycol) methacrylates (HOEGMA and MeOEGMA, respectively) from functionalised, planar surfaces via atom transfer radical polymerization (ATRP). The effects of initiator structure, initiator density, temperature, and monomer ratios have been investigated for these polymerizations. The polymer brushes grown in this way were found to convey protein resistance to the underlying inorganic substrates, prone to facile protein adsorption in their native state.     

Photoinduced Iron‐Based Water‐Induced Phase Separable Catalysis (WPSC) ICAR ATRP of Poly(ethylene glycol) Methyl Ether Methacrylate

Iron‐mediated atom transfer radical polymerization (ATRP) has gained extensive attention because of the superiority of iron catalysts, such as low toxicity, abundant reserves, and good biocompatibility. Herein, a practical iron catalyst recycling system, photoinduced iron‐based water‐induced phase separable catalysis ATRP with initiators for continuous activator regeneration, at room temperature is developed for the first time. In this polymerization system, the polymerization is conducted in homogenous solvents consisting of p‐xylene and ethanol, using commercially available 5,10,15,20‐tetraphenyl‐21H,23H‐porphine iron(III) chloride as the iron catalyst, ethyl 2‐bromophenylacetate as the ATRP initiator, 2,4,6‐trimethylbenzoyl diphenylphosphine oxide as the photoinitiator, and poly(ethylene glycol) methyl ether methacrylate as the model hydrophilic monomer. After polymerization, a certain amount of water is added to induce the phase separation so that the catalyst can be separated and recycled in p‐xylene phase with very low residual metal complexes (<12 ppm) in the resultant polymers even after six times recycle experiments.

     

Au/聚4-乙烯基吡啶-b-聚乙二醇嵌段聚合物刷的合成及其pH响应行为

作为受限高分子体系的一个经典模型,高分子刷在胶体稳定、聚合物链的自组装以及摩擦学等方面具有潜在的应用价值。 本文通过原子转移自由基聚合(ATRP)和点击化学(Click Chemistry)方法在金(Au)基底表面制备了pH响应性聚4-乙烯基吡啶-b-聚乙二醇(P4VP-b-PEG)嵌段聚合物刷。 通过频率-耗散型石英微天平(QCM-D)、X射线光电子能谱(XPS)和原子力显微镜(AFM)等技术手段分别对Au/P4VP-b-PEG聚合物刷经不同pH值溶液处理后的形态变化、表面组成和表面形貌进行了进一步深入研究。 结果表明,用不同pH值溶液处理P4VP-b-PEG嵌段聚合物刷后,该聚合物刷呈现刺激响应规律。 当pH=1.5时,P4VP链段质子化,由于静电排斥作用使P4VP-b-PEG链段呈伸展构象;当pH=11.5时,P4VP链段去质子化,并且由于失去部分结合水,P4VP-b-PEG链段呈塌缩构象。     

Polymer Brushes via ATRP: Role of Activator and Deactivator in the Surface‐Initiated ATRP of Styrene on Planar Substrates

The role of activator and deactivator species in the surface‐initiated atom‐transfer radical polymerization of styrene using CuBr/CuBr₂/pentamethyldiethylenetriamine as a model system is described. The influence of initially added deactivator with respect to the degree of controlling the layer growth and thickness is studied. Variation of the activator concentration results in changes of the kinetics as well as brush thicknesses consistent with the well‐known rate laws of ATRP.     

Direct Synthesis of Poly(potassium 3‐sulfopropyl methacrylate) Cylindrical Polymer Brushes via ATRP Using a Supramolecular Complex With Crown Ether

A supramolecular complex between an ionic monomer 3‐sulfopropyl methacrylate (SPMAK) and crown ether 18‐crown‐6 (18C6) has been employed to prepare a strong anionic cylindrical polyelectrolyte brush poly(potassium 3‐sulfopropyl methacrylate) (PSPMAK) by atom transfer radical polymerization (ATRP) in polar solvent dimethyl sulfoxide (DMSO). This strategy solved the problem of the solubilities of the incompatible hydrophobic poly‐initiator and hydrophilic ionic monomer. The formation of the PSPMAK brush is well proven by ¹H NMR, aqueous gel permeation chromatography (GPC), dynamic light scattering (DLS), static light scattering (SLS), atomic force microscopy (AFM), and cryogenic transmission electron microscopy (cryo‐TEM) measurements. Cleavage of the side chains and further analysis reveal that the initiating efficiency of the polymerization is as low as 0.35.

     

Synthesis of double hydrophilic graft copolymer containing poly(ethylene glycol) and poly(methacrylic acid) side chains via successive ATRP

A well‐defined double hydrophilic graft copolymer, with polyacrylate as backbone, hydrophilic poly(ethylene glycol) and poly(methacrylic acid) as side chains, was synthesized via successive atom transfer radical polymerization followed by the selective hydrolysis of poly(methoxymethyl methacrylate) side chains. The grafting‐through strategy was first used to prepare poly[poly(ethylene glycol) methyl ether acrylate] comb copolymer. The obtained comb copolymer was transformed into macroinitiator by reacting with lithium diisopropylamine and 2‐bromopropionyl chloride. Afterwards, grafting‐from route was employed for the synthesis of poly[poly(ethylene glycol) methyl ether acrylate]‐g‐poly(methoxymethyl methacrylate) amphiphilic graft copolymer. The molecular weight distribution of this amphiphilic graft copolymer was narrow. Poly(methoxymethyl methacrylate) side chains were connected to polyacrylate backbone through stable C? C bonds instead of ester connections. The final product, poly[poly(ethylene glycol) methyl ether acrylate]‐g‐poly(methacrylate acid), was obtained by selective hydrolysis of poly(methoxymethyl methacrylate) side chains under mild conditions without affecting the polyacrylate backbone. This double hydrophilic graft copolymer was found be stimuli‐responsive to pH and ionic strength. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4056–4069, 2008     

Poly(tetrafluoroethylene) Film Surface Functionalization with 2‐Bromoisobutyryl Bromide as Initiator for Surface‐Initiated Atom‐Transfer Radical Polymerization

A PTFE film surface was modified using a combined plasma/ozone‐activated process. The modified PTFE film was further reacted with 2‐bromoisobutyryl bromide to incorporate ATRP initiators in the film surface. Surface‐initiated ATRP on PTFE films was performed using sodium styrene sulfate as a monomer. The poly(sodium styrene sulfate) chain length grafted onto PTFE film surfaces increased with increasing reaction time. Analysis using X‐ray photoelectron spectroscopy, scanning electron microscopy, atomic force microscopy and a contact angle analyzer gave evidence of the success of the PTFE surface modifications.

     

Photosensitive Azopolymer Brushes via Atom Transfer Radical Polymerization for Protein Sensing

Novel photosensitive azopolymer brushes were synthesized via surface initiated atom transfer radical polymerization using initiator self‐assembled on Au surface. The chemical structures of azobenzene derivatives were confirmed by Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance spectroscopy (NMR). The surface morphology of azopolymers via atom transfer radical polymerization (ATRP) for different time was investigated by atomic force microscopy (AFM). Additionally, the photoisomerization of azopolymer was measured by ultraviolet‐visible spectroscopy (UV‐Vis). The results indicate that such azopolymers can undergo trans‐cis‐trans photoisomerization efficiently by photo‐irradiation with UV light. Furthermore, this photoisomerization property could also induce the reversible adsorption of bovine serum albumin (BSA) adsorption on azopolymer brush surfaces. This adsorption kinetics of the reversible process can be measured by surface plasmon resonance (SPR) spectroscopy in situ. It suggests that the protein biochips could be regenerated safely by UV irradiation rather than by being rinsed with chemical reagents.     

New photo‐induced thiol‐ene crosslinked films based on linear methacrylate copolymer polythiols

Thiol‐ene radical addition by photolysis is a highly efficient click reaction of sufhydryl groups with reactive enes that has been extensively explored as a promising means to construct multifunctional materials. Here, photo‐induced thiol‐ene crosslinked films composed of linear methacrylate copolymer polythiols (MCPsh) are reported. Well‐defined MCPsh copolymers were prepared by thiol‐responsive cleavage of pendant disulfide linkages positioned in the corresponding methacrylate copolymers with narrow molecular weight distribution which were synthesized by a controlled radical polymerization method. With a commercially available multifunctional acrylate as a model ene, photo‐induced thiol‐ene radical polyaddition of these polythiols is competitive to free‐radical homopolymerization of acrylates, yielding crosslinked films exhibiting rapid cure, uniform network, and enhanced mechanical properties; these properties are required for high performance coating materials. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2860–2868.     

A Simple Way for Synthesis of Alkyne-Telechelic Poly(methyl methacrylate) via Single Electron Transfer Radical Coupling Reaction

The telechelic α,ω‐alkyne‐poly(methyl methacrylate) (alkyne‐PMMA‐alkyne) was synthesized by single electron transfer radical coupling (SETRC) reaction of α‐alkyne, ω‐bromine‐poly(methyl methacrylate) (alkyne‐ PMMA‐Br). The propargyl 2‐bomoisobutyrate (PgBiB) was first prepared to initiate atom transfer radical polymerization (ATRP) of methyl methacrylate at 45°C using CuCl/1,1,4,7,10,10‐hexamethyl triethylenetetramine (HMTETA) as homogeneous catalytic system. Then the SETRC reaction was conducted at room temperature in the presence of nascent Cu(0) and N,N,N′,N′ ′,N′ ′‐pentamethyldiethyllenetriamine (PMDETA). The precursor alkyne‐PMMA‐Br and coupled product alkyne‐PMMA‐alkyne were characterized by GPC and ¹H NMR in detail.