1,3-Dipolar cycloaddition reactions of benzo[b]thiophene 1,1-dioxide with azomethine ylides

New pyrrolo derivatives of benzo[b]thiophene 1,1-dioxide have been synthesised via 1,3-dipolar cycloaddition reactions. Reaction of benzo[b]thiophene 1,1-dioxide with stabilised azomethine ylides gave products in low yield but high stereoselectivity whereas reaction with non-stabilised azomethine ylides gave high overall yields but low stereoselectivity.     

Microwave-assisted solvent-free intramolecular 1,3-dipolar cycloaddition reactions leading to hexahydrochromeno[4,3-b]pyrroles: scope and limitations

We report the microwave-assisted solvent-free synthesis of hexahydrochromeno[4,3-b]pyrroles. Intramolecular 1,3-dipolar cycloadditions proceed under these conditions within 15-40 min in 16-84% yields. An influence of the microwave irradiation upon various [3+2] cycloaddition reaction intermediates was studied. Additionally, a scope and limitations of these reactions including an influence of the dipolarophile geometry upon the cycloaddition selectivity and steric demands of the dipole upon its reactivity were also disclosed. These observations led us to postulate a preferable transition state of the reaction. Finally, an influence of the microwave irradiation to the isomerization of activated olefins was also described.     

Photoinduced Fluorescence Switching in Molecular Aggregates by Topological [2+2] Cycloaddition

The optical modulation of fluorescence characteristics in molecular aggregates, which mainly involves diverse molecular stacking and the consequent intermolecular interactions, remains a significant challenge for potential applications in optical anticounterfeiting, data storage, and imaging. Here we successfully realize in situ fluorescence switching in molecular aggregates of thianaphthene-dioxide derivatives by topological [2+2] photocycloaddition, which represents a promising way to regulate the molecular stacking and alter photophysical processes. Notably, 2-(3,5-bis-trifluoromethylphenyl)benzo[b]thiophene-dioxide (BTO-TF) in both crystal and powder forms exhibits a unique switching from an initial nonfluorescent state to a highly fluorescent state (Φ_PL=0.46) upon UV irradiation, because of the destruction of the [2+2] cycloaddition process by volume expansion of the photodimer. Furthermore, we demonstrate such a [2+2] photocycloaddition can occur when 2-(4-carboxypheny)benzo[b]thiophene-dioxide (BTO-OH) is doped within selective polymer matrixes, and can be utilized for the visualization of macrophase separation in polymer blends.     

Benzo[g]isoquinolinium benzoylmethylids

Stable benzo[g]isoquinolinium methylids were obtained from N-phenacylbenzo[g]isoquinolinium bromides and two of its benzene ring-substituted analogs. The first of these quaternary salts was converted to benzo[g]isoquinolinium dibenzoylmethylid. 3-Benzoyl-l,2-dicarbomethoxynaphth[2,3-g]indolizine was obtained from the same salt with dimethyl acetylenedicarboxylate (via a 1,3-dipolar cycloaddition reaction). Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 6, pp. 806–807, June, 1980     

Synthesis of heterocyclic phthalimidoalkyl ketones

We have investigated the 1,3-dipolar cycloaddition of dehydrobenzene, N-phenyl-maleimide, and diethyl acetylenedicarboxylate to phthalimidoalkyl diazomethyl ketones, and have obtained phthalimide derivatives of amino ketones of the indazole, pyrazole, and pyrrolo[3,4-d]-2-pyrazoline series.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 1, pp. 78–81, January, 1984.     

Synthesis and properties of highly fluorescent indolizino[3,4,5-ab]isoindoles

We report here the synthesis, X-ray structures, optical and electrochemical properties, fabrication of light-emitting devices, and density functional calculations for indolizino[3,4,5-ab]isoindole (INI) derivatives. Strongly luminescent heterocycles based on the INI unit were synthesized by 1,3-dipolar cycloaddition reactions between pyrido[2,1-a]isoindole (PIS) and acetylene or ethylene derivatives. They are indolizino[3,4,5-ab]isoindoles 2-9 and 14-15, benzo[1',2'-1,2]indolizino[3,4,5-ab]isoindoles 10, pyridazino[4',5':1,2]indolizino[3,4,5-ab]isoindoles 12-13, and 2,3-hydropyridazino[4',5':1,2]indolizino[3,4,5-ab]isoindole-1,4-dione 11. The relative luminescence quantum yield can be as high as 90%. Their reduction and oxidation potentials and high luminescence can make these heterocycles possible alternatives to tris(8-hydroxyquinolinato)aluminum (Alq(3)). The brightness of the light-emitting device reached as high as 10(4) cd/m(2) and indolizino[3,4,5-ab]isoindole 3 emits beautifully blue light. The X-ray crystal structures of INI derivatives were obtained for the first time. The geometries obtained from X-ray data and density functional theory calculations shed more light on an interesting formally antiaromatic 16pi system, which is divided into 10pi and 6pi aromatic systems. We also report a relatively easy protonation of INI, which occurs at a carbon, rather than nitrogen atom.     

Synthesis and Structure–Property Relationships of 2,2′‐Bis(benzo[b]phosphole) and 2,2′‐Benzo[b]phosphole–Benzo[b]heterole Hybrid π Systems

The first comprehensive study of the synthesis and structure–property relationships of 2,2′‐bis(benzo[b]phosphole)s and 2,2′‐benzo[b]phosphole–benzo[b]heterole hybrid π systems is reported. 2‐Bromobenzo[b]phosphole P‐oxide underwent copper‐assisted homocoupling (Ullmann coupling) and palladium‐catalyzed cross‐coupling (Stille coupling) to give new classes of benzo[b]phosphole derivatives. The benzo[b]phosphole–benzo[b]thiophene and ‐indole derivatives were further converted to P,X‐bridged terphenylenes (X=S, N) by a palladium‐catalyzed oxidative cycloaddition reaction with 4‐octyne through the C_β? H activation. X‐ray analyses of three compounds showed that the benzo[b]phosphole‐benzo[b]heterole derivatives have coplanar π planes as a result of the effective conjugation through inter‐ring C? C bonds. The π–π* transition energies and redox potentials of the cis and trans isomers of bis(benzo[b]phosphole) P‐oxide are very close to each other, suggesting that their optical and electrochemical properties are little affected by the relative stereochemistry at the two phosphorus atoms. The optical properties of the benzo[b]phosphole–benzo[b]heterole hybrids are highly dependent on the benzo[b]heterole subunits. Steady‐state UV/Vis absorption/fluorescence spectroscopy, fluorescence lifetime measurements, and theoretical calculations of the non‐fused and acetylene‐fused benzo[b]phosphole–benzo[b]heterole π systems revealed that their emissive excited states consist of two different conformers in rapid equilibrium.     

2,5-Dimethoxy-2,5-dihydrofurans in 1,3-dipolar cycloaddition reactions

Itis shown that 2,5-dimethoxy-2,5-dihydrofurans enter into 1,3-dipolar cycloaddition with benzonitrile N-oxides and with diphenylnitrilimines to form derivatives of 1,3-dimethoxy-6-phenyl-1,3,3a,6a-tetrahydrofuro[3,4-d]isoxazole and 1,3-dimethoxy-4,6-diphenyl-1,3,3a,-6a-tetrahydrofuro[3,4-d]pyrazole, respectively.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 2, pp. 150–151, February, 1971.     

Catalytic opening of the diaziridine fragment in 6-aryl-1,5-diazabicyclo[3.1.0]hexanes

Treatment of 6-aryl-1,5-diazabicyclo[3.1.0]hexanes with Lewis acids [BF₃·Et₂O or In(OTf)₃] promotes opening of the diaziridine ring, followed by formation of 1,3-dipolar cycloaddition products with N-arylmaleimides. The conversion of the initial diaziridine depends on the nature of the 6-aryl group. Diazabicyclohexanes with donor substituents react quantitatively to give (in the absence of dipolarophiles) the corresponding azomethine imine dimers, 1,2,4,5-tetrazine derivatives. The conversion of diazabicyclohexanes having acceptor substituents is poor; simultaneously, the fraction of the hydrolysis products increases. The stereoselectivity in the 1,3-dipolar cycloaddition, i.e. the ratio of the cis-and trans-adducts, depends on the catalyst and solvent. Azomethine imine dimers react with N-arylmaleimides in the presence of indium(III) trifluoromethanesulfonate to give the same 1,3-dipolar cycloaddition products as those obtained from parent 1,5-diazabicyclohexanes.     

4-甲基吡咯并[2,1,5-cd]中氮茚的合成

以2-乙基吡啶生成的叶立德为原料,采用1,3-偶极环加成反应,得到了一系列3-乙酰基(或苯甲酰基)-5-乙基中氮茚衍生物,后者与KOH在加热条件下发生分子内缩合,得到了一系列4-甲基吡咯并[2,1,5-cd]中氮茚.     

Regioselective synthesis of 1,2,3-triazolyl derivatives of calix[4]arenes based on 1,3-dipolar cycloaddition

Regioselective synthesis of 1,2,3-triazolyl derivatives of calix[4]arenes based on the 1,3-dipolar cycloaddition of substituted benzyl azides to tetra(propargyloxy)calix[4]arenes in the presence of copper iodide was carried out. The presence of the p-methoxybenzyl substituent in the triazole ring leads to a dramatic (more than tenfold) increase in the fluorescence of the corresponding macrocycle in a region of 290–310 nm.     

Ultrasound-Assisted Synthesis of Fluorescent Azatetracyclic Derivatives: An Energy-Efficient Approach

We report here an energy-efficient and straight synthesis of two new classes of derivatized fluorescent azatetracycles under ultrasound (US) irradiation. A first class of azatetracyclic compounds was synthesized by heterogeneous catalytic bromination of the α-keto substituent attached to the pyrrole moiety of the tetracyclic cycloadducts, while for the second, one class was synthesized by nucleophilic substitution of the bromide with the azide group. Comparative with conventional thermal heating (TH) under US irradiation, both types of reactions occur with substantially higher yields, shortened reaction time (from days to hours), lesser energy consumed, easier workup of the reaction, and smaller amounts of solvent required (at least three to five-fold less compared to TH), which make these reactions to be considered as energy efficient. The derivatized azatetracycle are blue emitters with λmax of fluorescence around 430–445 nm. A certain influence of the azatetracycle substituents concerning absorption and fluorescent properties was observed. Compounds anchored with a bulky azide group have shown decreased fluorescence intensity compared with corresponding bromides.     

Synthesis of fullerene building blocks bearing alkyne or azide groups and their subsequent functionalization by the copper mediated Huisgen 1,3-dipolar cycloaddition

C₆₀ derivatives bearing either terminal alkyne or azide functional groups have been prepared and used as building blocks under the copper mediated Huisgen 1,3-dipolar cycloaddition conditions. In general, the reactivity of C₆₀ toward azides does not significantly compete with the cycloaddition leading to the desired 1,2,3-triazole derivatives and good yields can be obtained when fullerene derivatives with reasonable solubility are used as starting materials. The electrochemical properties of the new fullerene derivatives have also been investigated by cyclic voltammetry (CV) and Osteryoung Square Wave Voltammetry (OSWV).     

Synthesis of 3,6,7-triazabicyclo[3.3.0]octenes by 1,3-cycloaddition with N-arylpyrrolidin-2-ones

The 1,3-dipolar cycloaddition of diazomethane to 1-(4-R-phenyl)-5H-pyrrolidin-2-one was investigated. Some properties of the triazabicyclo[3.3.0]octenes, including the results of an x-ray diffraction analysis, were studied.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 7, pp. 895–898, July, 1992.     

A convenient synthesis of 5-(1,2,4-oxadiazol-5-yl)pyrimidine-2,4(1H,3H)-diones

The synthesis of 5-heteroaryl-substituted uracil derivatives is presented. The 1,3-dipolar cycloaddition reaction was applied for the construction of a heterocyclic ring. The nitrile oxides were obtained from the appropriate 4-substituted benzaldoximes using N-chlorosuccinimide (NCS) under basic conditions. [2+3] Cycloaddition of nitrile oxides with 5-cyanouracil as a dipolarophile gave the corresponding 5-(3-substituited-1,2,4-oxadiazol-5-yl)uracils in satisfactory yields under mild conditions. 5-Substituted uracils having an additional heterocyclic ring were obtained as a result of the [2+3] cycloaddition of 5-cyanouracil to nitrile oxides generated from thiophene-2-carbaldehyde and 5-formyluracil derivatives.     

Novel 1,3-dipolar cycloaddition reactions of calix[4]bis(spirodienones): synthesis of isoxazolidine derived macrocycles

Calix[4]bis(spirodienones) can perform as either 4π or 2π components in cycloaddition reactions with various carbo- and hetero-dienophiles and with 1,2-benzoquinones leading to the formation of highly functionalized macrocycles. In this Letter we report, highly regio- and stereoselective 1,3-dipolar cycloaddition reactions of a bis(spirodienone) derivative of calix[4]arene with nitrones that provide easy access to isoxazolidine derived macrocycles in excellent yields. These isoxazolidine derivatives can be considered as direct precursors of 1,3-amino alcohols.     

Expeditious preparation of isoxazoles from Δ-isoxazolines as advanced intermediates for functional materials

A collection of isoxazoles derivatives has been efficiently synthesized in three steps. The oximation reaction of aldehydes followed by nitrile oxide [3+2] 1,3-dipolar cycloaddition and MnO₂-oxidation reaction furnished the title compounds which were purified by simple filtration on celite®.     

Intramolecular 1,3-Dipolar Cycloaddition of Azomethine Ylides Leading to Pyrido[2,3-b]quinolines

A convenient six-step route to the previously unknown 1H-pyrrolo[2,3-f]benzo[b][1,8]naphthyridine ring system using an intramolecular 1,3-dipolar cycloaddition of nonstabilized azomethine ylides has been described.     

1,3-Dipolar cycloaddition of azides with electron-deficient alkynes under mild condition in water

We report a simple synthetic protocol for the 1,3-dipolar cycloaddition of azides with electron-deficient alkynes. Alkyne with at least one neighboring electron-withdrawing group proceeds with the cycloaddition successfully without any catalysts at room temperature in water. Under this simple condition, we evaluated a series of small molecule model reactions and then coupled an azido-DNA molecule with electron-deficient alkynes for the formation of [1,2,3]-triazole heterocycle, providing a potential method for introducing functional groups to DNA under biological conditions.     

Intramolecular 1,3-dipolar cycloaddition of unsaturated nitrones derived from methyl α-d-glucopyranoside

The intramolecular 1,3-dipolar cycloaddition of unsaturated nitrones derived from methyl α-d-glucopyranoside with 2-furaldehyde has been studied. This cycloaddition was found to afford three 9-oxa-1-azabicyclo[4.2.1]nonane diastereomers in a 3:1:1 ratio [with the principal isomer possessing a (3S,4R,5S,6S,8S) configuration, determined by NMR spectroscopy]. The effects of different Lewis acid catalysts (MgCl₂, ZnCl₂ and BF₃·OEt₂) on yields and diastereomeric ratios have been examined in detail. The best result (90% yield) was achieved when MgCl₂ was present (in toluene, 120 °C bath temperature, 12 h). The stereoselectivity of the 1,3-dipolar cycloaddition was not significantly altered under the conditions investigated.