An Efficient Approach to 2-CF3-Indoles Based on ortho-Nitrobenzaldehydes

The catalytic olefination reaction of 2-nitrobenzaldehydes with CF₃CCl₃ afforded stereoselectively trifluoromethylated ortho-nitrostyrenes in up to 88% yield. The reaction of these alkenes with pyrrolidine permits preparation of α-CF₃-β-(2-nitroaryl) enamines. Subsequent one pot reduction of nitro-group by Fe-AcOH-H₂O system initiated intramolecular cyclization to afford 2-CF₃-indoles. Target products can be prepared in up to 85% yields. Broad synthetic scope of the reaction was shown as well as some followed up transformations of 2- CF₃-indole.     

Synthesis and Reactions of 3-Halogenated 2-CF3-Indoles

Halogenation of 2-trifluoromethylindole afforded 3-chloro-, 3-bromo- and 3-iodo derivatives in up to 98% yield. Methyl-, benzyl- and tosyl-groups can be installed at the nitrogen atom of prepared indoles in high yields by base catalyzed reaction with the corresponding alkylating (sulfonylating) reagents. A high synthetic utility of the prepared haloindoles in the reaction with various nucleophilies was shown. The reaction with 4-methylthiophenol and copper cyanide afforded the corresponding sulfides and nitriles in high yield. Palladium catalyzed cross-coupling with phenyl boronic acid and phenylacetylene gave the corresponding 3-phenyl-2-CF₃-indoles and acetylenic derivatives in 72–98% yield.     

Direct dynamics studies for the reactions of CF3CHFCF3 and CF3CF2CHF2 with H atoms

The rate constants of the hydrogen abstraction reactions of CF₃CHFCF₃ + H (R1) and CF₃CF₂CHF₂ + H (R2) have been calculated by means of the dual-level direct dynamics method. Optimized geometries and frequencies of stationary points and extra points along the minimum-energy path (MEP) are obtained at the MPW1K/6-311+G(d,p) level, and the classical energetic information is further corrected with the interpolated single-point energy (ISPE) approach by the G3(MP2) level of theory. Using the canonical variational transition state theory (CVT) with small-curvature tunneling corrections (SCT), the rate constants are evaluated over a wide temperature range of 200-2000 K. The calculated CVT/SCT rate constants are in good agreement with available experimental values. It is found that the variational effect is very small and almost negligible over the whole temperature region. However, the small-curvature tunneling correction plays an important role in the lower temperature range. Furthermore, the heats of formation of species CF₃CF₂CHF₂ (SC₁ or SC₂) and CF₃CF₂CF₂ are studied using isodesmic reactions to further elucidate the thermodynamic properties.     

An Efficient Procedure for the Synthesis of Benzoxazole and Benzothiazole Derivatives Using a H2O2/SiO2-FeCl3 System

A series of benzoxazole and benzothiazoles was readily prepared from the reaction of ortho-aminophenol/ortho-aminothiophenol and aldehydes using solid silica supported ferric chloride (SiO₂-FeCl₃) as catalyst followed by oxidation with H₂O₂ under ambient conditions. Some of advantages of this method are a simple and convenient procedure, easy purification, and shorter reaction times.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

Synthesis Of CF3-Heterocycles Based on 4-Dimethylamino-1,1,1-trifluoro-3-buten-2-one

Novel heterocyclizations have been investigated based on the reaction of the complex between trifluoromethanesulfonic anhydride and 4-dimethylamino-1,1,1-trifluoro-3-buten-2-one with 2,2'-biindolyl and N,N'-dipyrrolylmethane leading to closure of 6- or 7-membered rings.     

Eu(NTf2)3催化吲哚与醛(酮)反应合成二吲哚基甲烷

二(三氟甲基磺酰)亚胺铕(III) [Eu(NTf₂)₃, Tf＝SO₂CF₃]作催化剂, 吲哚与醛(酮)在室温下发生亲电取代反应合成了一系列二吲哚基甲烷, 产率85%～98%. 该法反应条件温和、时间短、催化剂用量少且可以回收重复使用.     

Investigation of CF2 carbene on the surface of activated charcoal in the synthesis of trifluoroiodomethane via vapor-phase catalytic reaction

This paper investigates the synthetic mechanism of trifluoroiodomethane (CF₃I) in the reaction of trifluoromethane and iodine via vapor-phase catalytic reaction. It is suggested that CF₂ carbene is the key intermediate and is formed in the pyrolysis process of CHF₃ at high temperature. However, in pyrolysis of CHF₃ under activated charcoal (AC) existing conditions, no C₂F₄ was detected. H₂ and 2-methyl-2-butene could not trap the CF₂ carbene. When treating the remained compounds on the used AC with H₂, CH₄ is formed on the process. It is proposed that CF₂ carbene combines with AC strongly and transfers into CF₃ radical on heat. In addition, it is found that the AC is not only the catalyst supporter to form CF₃I, but also a co-catalyst to promote the formation of CF₂ carbene and CF₃ radical.     

Dissociation and IVR pathways for the CF3H(H2O)3 cluster

Classical trajectory simulations are used to study the intramolecular dynamics of isolated CF₃H and the CF₃H(H₂O)₃ cluster, by either exciting the CH stretch local mode to then=6 level or by adding an equivalent amount of energy to an OH stretch normal mode. Energy transfer from the CH local mode is statistically the same for CF₃H(H₂O)₃ as for isolated CF₃H, and agrees with previous experimental studies. Clusters excited with 6 quanta in the CH local mode are remarkably stable. Though the CF₃H-(H₂O)₃ intermolecular potential is only 1.5 kcal/mol, only 1 of 26 clusters excited with 6 quanta in the CH local mode dissociate within 10 ps. The absorption linewidth for the CH local mode in CF₃H(H₂O)₃ is related to IVR within CF₃H and not to the unimolecular lifetime of the cluster. When an OH stretch normal mode of the cluster is excited, energy transfer to CF₃H is negligible and nearly one half of the clusters dissociate within 10 ps.     

Versatile Fluorine-Containing Building Blocks: β-CF3-1,3-enynes

The development of diversity-oriented synthesis based on fluorine-containing building blocks has been one of the hot research fields in fluorine chemistry. β-CF₃-1,3-enynes, as one type of fluorine-containing building blocks, have attracted more attention in the last few years due to their distinct reactivity. Numerous value-added trifluoromethylated or non-fluorinated compounds which have biologically relevant structural motifs, such as O-, N-, and S-heterocycles, carboncycles, fused polycycles, and multifunctionalized allenes were synthesized from these fluorine-containing building blocks. This review summarizes the most significant developments in the area of synthesis of organofluorine compounds based on β-CF₃-1,3-enynes, providing a detailed overview of the current state of the art.     

Structure and electronic structure of [(CF3)2PN]2NVCl2, a molecule involving a planar six-membered ring (N3P2V)

Summary The SCF method is applied to determine the (gas phase) structure of [(CF₃)₂PN]₂NVCl₂, which agrees with the solid-state X-ray structure within typical errors of 2 pm and 2° in bond distances and angles. The electronic structure of atoms forming the ring is best described in terms of divalent N^– and tetravlent P⁺ with appreciable declocalization of nitrogen lone pairs into low-lying empty orbitals of neighbouring atoms P and V. No evidence for aromaticity of the ring system is found.     

Reactions of CF3-enones with ethyl nitroacetate and nitromethane: synthesis of CF3-γ-nitroketones

Reactions of α,β-unsaturated CF₃-ketones with nitromethane and ethyl nitroacetate have been investigated. We found that α,β-unsaturated trifluoromethylketones react with ethyl nitroacetate in the presence of calcinated potassium fluoride to form two classes of 1,4-conjugated addition products: CF₃-γ-nitroketones and 6,6,6-trifluoro-2-nitro-5-oxohexanoates in nearly quantitative yields. The products obtained are precursors for CF₃-pyrrolidine synthesis.     

Synthesis of 2-(trifluoromethyl)-1,2-dihydro-4H-thieno[2,3-c]chromen-4-ones and 2-(trifluoromethyl)-4H-thieno[2,3-c]chromen-4-ones from 2-trifluoromethylchromones and ethyl mercaptoacetate

The redox reaction of 2-trifluoromethylchromones with ethyl mercaptoacetate in the presence of triethylamine results in the formation of 1,2-dihydrothieno[2,3-c]chromen-4-ones and diethyl 3,4-dithiadipate in high yields. Oxidation of the first compounds with nitrogen dioxide gave 1,2-dihydrothieno[2,3-c]chromen-3,4-diones which were converted into thieno[2,3-c]chromen-4-ones.     

Gas-phase reactions of CF3 and CF2 with atomic and molecular fluorine: Their significance in plasma etching

Reaction rate coefficients have been measured at 295 K for both CF₃ and CF₂ with atomic and molecular fluorine. The reaction between CF₃ and F was studied over a gas number density range of (2.4–23)×10¹⁶ cm^–3 with helium as the bath gas. The measured rate coefficient increased from (1.1–1.7)×10^–11 cm³ s^–1 as the gas number density increased over this range. In contrast to this relatively small change in rate coefficient with gas number density, the rate coefficient for CF₂+F increased from (0.4–2.3)×10^–12 cm³ s^–1 as the helium gas number density increased from (3.4–28.4)×10¹⁶ cm^–3. Even for the highest bath gas number density employed, the rate coefficient was still more than an order of magnitude lower than earlier measurements of this coefficient performed at comparable gas number densities.Both these association reactions are examined from the standpoint of the Gorin model for association of radicals and use is made of unimolecular dissociation theory to examine the expected dependence on gas number density. The calculations reveal that CF₃+F can be explained satisfactorily in these terms but CF₂+F is not well described by the simple Gorin model for association.CF₃ was found to react with molecular fluorine with a rate coefficient of (7±2)×10^–14 cm³ s^–1 whereas only an upper limit of 2×10^–15 cm³ s^–1 could be placed on the rate coefficient for the reaction between CF₂ and F₂. The values obtained for this set of reactions mean that the reaction between CF₃ and F will play an important role in plasmas containing CF₄. The high rate coefficient will mean that, under certain conditions, this particular reaction will control the amount of CF₄ consumed. On the other hand, the much lower rate coefficient for reactions between CF₂ and F means that CF₂ will attain much higher concentrations than CF₃ in plasmas where these combination reactions are dominant.     

One-Pot Synthesis of 2,4,5-Trisubstituted Imidazoles Using MoO3/SiO2, an Efficient and Recyclable Catalyst

A simple one-pot synthesis has been developed for the synthesis of 2,4,5-trisubstituted imidazoles using an efficient and recyclable MoO₃/SiO₂ solid acid catalyst by condensation of benzil or benzoin, benzaldehyde, and ammonium acetate in acetonitrile as a solvent. Using this solid catalyst, the reactions could be carried out under mild reaction conditions with very good yield of imidazoles, up to 95%. This catalyst could be recycled very easily, which makes this methodology environmentally benign.     

Efficient Room-Temperature Synthesis and Antimicrobial Study of Novel 2-Aroylbenzofuran-3-ols from Substituted Methyl Salicylates and Phenacyl Bromides

The article describes a convenient and efficient synthetic route for the construction of 2-aroylbenzofuran-3-ols from readily available diverse methyl salicylates and phenacyl bromides using K₂CO₃ as catalyst in dimethylformamide as solvent at room temperature. The reaction involves two steps, which occur in quick succession within 1 h to deliver the product with reasonably high yields. All the synthesized 2-aroylbenzofuran-3-ols (4a–u) were subjected for their antimicrobial studies, and some of these have shown prominent activity.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

Efficient One-Step Synthesis of C 3-Symmetrical Benzenoid Compounds Mediated by SOCl2/EtOH

Abstract

An efficient one-step synthesis of branched functionalized benzenoid compounds from aryl methyl ketones mediated by SOCl₂/EtOH is described; some novel C ₃-symmetrical molecules were prepared with satisfactory yields. The method enjoys short reaction time and simple operation, and avoids use of organometallic reagents.     

Synthesis and Crystal Structure of (Z)-4-(p-Bromo phenylthio)-3-(p-nitrobenzoyloxy)-3-buten-2-one

１　ＩＮＴＲＯＤＵＣＴＩＯＮＩｎｏｒｄｅｒｔｏｅｖａｌｕａｔｅｔｈｅｓｅｌｅｃｔｉｖｉｔｙａｎｄｒｅａｃｔｉｖｉｔｙｏｆｅｎｏｎｅｓａｓｄｉｅｎｏｎｅｐｈｉｌｅｓａｎｄｄｉｅｎｅｓｉｎＤｉｅｌｓＡｌｄｅｒｒｅａｃｔｉｏｎ,Ｐａｒａｌｔａｓｙｎｔｈｅｓｉｚｅｄβｆｕｎｃｔｉｏｎａｌｉｚｅｄｌａｃｅｔｙｌｖｉｎｙｌａｒｅｎｅｃａｒｂｏｘｙｌａｔｅｓａｓａｓｕｂｓｔｒａｔｅｏｆ１,３ｄｉｐｏｌａｒｃｙｃｌｏａｄｄｉｏｎｒｅａｃｔｉｏｎ〔１〕．Ｘｒａｙｃｒｙｓｔａｌｌｏｇｒａｐｈｉｃｓｔｕｄ…     

Similarities in the Intensities of Analogous Rydberg–Rydberg Transitions in the Molecular Series CF x Cl y (x=3, 2, 1; y=1, 2, 3)

In this work, the photoabsorption behaviour of the molecular series CF₃Cl, CF₂Cl₂ and CFCl₃, involving their ground state and two different Rydberg series, has been studied. The discrepancies or similarities in the intensities of homologous transitions in the three CF _x Cl _y molecules have been analysed on account of their electronic structure. Absorption oscillator strengths have been calculated with the Molecular quantum defect orbital (MQDO) approach. Electronic transitions between states belonging to two different unperturbed Rydberg series of the same molecule have been calculated by us for the first time. The quality of the achieved oscillator strengths has been assessed by comparison with, to our knowledge, scarce experimental data available in the literature, through analysis of the discrepancies or similarities in the intensities of homologous transitions in the molecular series CF _x Cl _y when states of different type are involved, and by testing the compliance of regularities by the Rydberg series object of our study.Article for the special issue dedicated to J.-P. Malrieu     

电池正极材料Li3V2(PO4)3/C的水热合成和性能

以LiOH·H2O, NH4VO3, NH4H2PO4 和麦芽糖等为原料, 采用水热法合成了碳包覆的磷酸钒锂化合物, 考察了碳含量对材料电化学性能的影响. 利用XRD, TEM, SEM和恒流充放电测试等手段对产物的结构、 形貌和电化学性能进行表征. 结果表明, 在650℃煅烧的样品为单一纯相的单斜晶体结构. 晶体颗粒分布为100~300 nm, 粒度分散均匀, 分散性良好, 无团聚现象, 且在颗粒表面包覆了一层无定形碳, 这有利于改善材料的导电率. 含碳量为10.23%的样品, 在倍率1.0C的电流密度下, 在3.0~4.3 V电压范围内, 样品的首次放电比容量高达118.8 mA·h/g, 循环15圈后放电比容量为115.1 mA·h/g, 容量保持率为96.88%.     

Efficient route to 6-CF3-substituted nicotinic acid derivatives

A novel synthetic sequence for preparation of CF₃-pyridines is presented. Reaction of α,β-unsaturated trifluoromethylketones with α-cyanoketones leads to α-hydroxydihydropyranes 1 containing CF₃-group. α-Hydroxydihydropyranes can be easily transformed to α-hydroxytetrahydropyridines, 1,4-dihydropyridines and CF₃-pyridines. All CF₃-pyridine derivatives were obtained in good yields. This route can be applied for preparation of CF₃-pyridines containing various substituents with further possible modification on cyano-group.