Synthesis of the Functional Hydrogels: Poly(N-isopropylacrylamide) Threaded onto the PEG Backbones Via RAFT

Functional poly(N-isopropylacrylamide) (PNIPAM) hydrogels were prepared by reversible addition fragmentation chain transfer (RAFT) polymerization of NIPAM in the presence of four-arm poly(ethylene glycol) (4A-PEG) as backbone and 4-cyanopentanoic acid dithiobenzoate functional α -cyclodextrin threaded onto the PEG as chain transfer reagent (CTA).The structure of the hydrogels was characterized in detail with FTIR techniques. The analytical results demonstrated that α -cyclodextrin remains in as-obtained hydrogels. The swelling behavior was investigated and the functional hydrogels (functional gels) showed accelerated shrinking kinetics and higher swelling ratio comparing with conventional hydrogel (CG). It could be attributed to the presence of dangling chains. The hydrogel exhibited rapid swelling and deswelling kinetics. In principle, the hydrogel might find a number of applications including an on-off system and drug delivery systems.     

NMR investigation of effect of dissolved salts on the thermoresponsive behavior of oligo(ethylene glycol)‐methacrylate‐based polymers

The synthesis of thermo‐ and ionic‐responsive copolymers based on polyethylene glycol methyl ether methacrylate (OEGMA) and 2,2,2‐trifluoroethyl acrylate (TFEA) via reversible addition‐fragmentation chain transfer polymerization is described. Reactivity ratios for the copolymerization of OEGMA and TFEA are r_OEGMA = 2.46 and r_TFEA = 0.22, indicating that OEGMA is incorporated more rapidly than TFEA monomers. The copolymers are thermosensitive and exhibit volume phase transitions (lower critical solution behavior) at temperature, which depend on copolymer composition and the presence of added salts in the aqueous solutions. It was found that the copolymers exhibited LCST transitions at temperatures below 353 K only in salt solutions. ¹H NMR measurements indicated that motion of the protons located in and near the hydrophobic main chain are more sensitive to temperature than protons in the hydrophilic OEGMA side chains. The hydrophilic side chains remain largely hydrated; however, the presence of two distinct conformations of the terminal groups of the side chains was confirmed. The influence of OEGMA side chain length, copolymer composition, and salt type on aggregation behavior and dynamics was examined in detail. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2375–2385     

RAFT synthesis of a water‐soluble triblock copolymer of poly(styrenesulfonate)‐b‐poly(ethylene glycol)‐b‐poly(styrenesulfonate) using a macromolecular chain transfer agent in aqueous solution

Triblock copolymers of poly(styrenesulfonate)‐b‐poly(ethylene glycol)‐b‐poly(styrenesulfonate) with narrow molecular weight distribution (M_w/M_n = 1.28–1.40) and well‐defined structure have been synthesized in aqueous solution at 70 °C via reversible addition‐fragmentation chain transfer polymerization. Poly(ethylene glycol) (PEG) capped with 4‐cyanopentanoic acid dithiobenzoate end groups was used as the macro chain transfer agent (PEG macro‐CTA) for sole monomer sodium 4‐styrenesulfonate. The reaction was controllable and displayed living polymerization characteristics and the triblock copolymer had designed molecular weight. The reaction rate depended strongly on the CTA and initiator concentration ratio [CTA]₀/[ACPA]₀: an increase in [CTA]₀/[ACPA]₀ from 1.0 to 5.0 slowed down the polymerization rate and improved the molecular weight distribution with a prolonged induction time. The polymerization proceeded, following first‐order kinetics when [CTA]₀/[ACPA]₀ = 2.5 and 5.0. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3698–3706, 2007     

聚(N-异丙基丙烯酰胺)类热敏材料的研究进展

从均聚物、共聚物及接枝改性三方面对聚（Ｎ－异丙基丙烯酰胺）类热敏高分子材料的最新研究进展进行了综述。简述了其热敏机理以及这种热敏材料在生物医学工程中的应用。     

交联聚(N-异丙基丙烯酰胺)/(海藻酸钠/聚(N-异丙基丙烯酰胺))半互穿网络水凝胶的制备及其溶胀性能

将线性聚(N-异丙基丙烯酰胺)(PNIPAAm)和海藻酸钠(SA)分子同时引入到PNIPAAm凝胶中,制备了交联聚(N-异丙基丙烯酰胺)/(海藻酸钠/聚(N-异丙基丙烯酰胺))半互穿网络(Cr-PNIPAAm/(SA/PNIPAAm)semi-IPN)水凝胶。在弱碱性条件下(pH=7.4),改变SA与线性PNIPAAm的质量比对Cr-PNIPAAm/(SA/PNIPAAm)semi-IPN水凝胶的溶胀度没有太大的影响。在酸性条件下(pH=1.0),其溶胀度随着SA与线性PNIPAAm质量比的减小而增大。由于亲水性SA与线性PNIPAAm的协同作用,Cr-PNIPAAm/(SA/PNIPAAm)semi-IPN水凝胶的消溶胀速率得到很大提高。     

Synthesis and characterization of block copolymers containing poly(di(ethylene glycol) 2‐ethylhexyl ether acrylate) by reversible addition–fragmentation chain transfer polymerization

Reversible addition–fragmentation chain transfer (RAFT) polymerization has emerged as one of the important living radical polymerization techniques. Herein, we report the polymerization of di(ethylene glycol) 2‐ethylhexyl ether acrylate (DEHEA), a commercially‐available monomer consisting of an amphiphilic side chain, via RAFT by using bis(2‐propionic acid) trithiocarbonate as the chain transfer agent (CTA) and AIBN as the radical initiator, at 70 °C. The kinetics of DEHEA polymerization was also evaluated. Synthesis of well‐defined ABA triblock copolymers consisting of poly(tert‐butyl acrylate) (PtBA) or poly(octadecyl acrylate) (PODA) middle blocks were prepared from a PDEHEA macroCTA. By starting from a PtBA macroCTA, a BAB triblock copolymer with PDEHEA as the middle block was also readily prepared. These amphiphilic block copolymers with PDEHEA segments bearing unique amphiphilic side chains could potentially be used as the precursor components for construction of self‐assembled nanostructures. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5420–5430, 2007     

Synthesis of Seven-Arm Poly(vinyl pyrrolidone) Star Polymers with Lysozyme Core Prepared by MADIX/RAFT Polymerization

A poly(vinyl pyrrolidone) (PVP) seven-arms star polymer with lysozyme core was synthesized by conjugating linear N-succinimidyl ester terminated PVP polymer to lysozyme. Reactive PVP polymers were synthesized using a MADIX/RAFT agent functionalized with N-succinimidyl ester. The polymerization of N-vinyl pyrrolidone proceeded in a living fashion up to more than 90% conversion reaching molecular weight of up to 33 000 g · mol⁻¹ with narrow molecular weight distributions. The PVP polymer was conjugated to lysozyme resulting in the attachment of seven PVP polymers to one lysozyme core. While the reaction was found to be complete when using low-molecular weight PVP, some by-products with less than seven arms were observed when using PVP with a molecular weight of 33 000 g · mol⁻¹.

     

聚(N-异丙基丙烯酰胺)类材料的应用

聚(N-异丙基丙烯酰胺)(PNIPAAm)及其共聚物,在水溶液中表现出最低临界溶液温度(LCST),在LCST附近会发生可逆相转变。利用这种特性,可将热敏性高分子材料应用于生物医学工程、免疫分析、催化、分离提纯等领域。主要综述了热敏性PNIPAAm类高分子材料,在这些领域中的应用情况。     

Thermoresponsive NIPAM block copolymers containing densely grafted poly(vinyl ether) brushes synthesized by a combination of living cationic polymerization and RAFT polymerization

Diblock copolymers consisting of a multibranched polymethacrylate segment with densely grafted poly[2‐(2‐methoxyethoxy)ethyl vinyl ether] pendants and a poly(N‐isopropylacrylamide) segment were synthesized by a combination of living cationic polymerization and RAFT polymerization. A macromonomer having both a poly[2‐(2‐methoxyethoxy)ethyl vinyl ether] backbone and a terminal methacryloyl group was synthesized by living cationic polymerization. The sequential RAFT copolymerizations of the macromonomer and N‐isopropylacrylamide in this order were performed in aqueous media employing 4‐cyanopentanoic acid dithiobenzoate as a chain transfer agent and 4,4′‐azobis(4‐cyanopentanoic acid) as an initiator. The obtained diblock copolymers possessed relatively narrow molecular weight distributions and controlled molecular weights. The thermoresponsive properties of these polymers were investigated. Upon heating, the aqueous solutions of the diblock copolymers exhibited two‐stage thermoresponsive properties denoted by the appearance of two cloud points, indicating that the densely grafted poly[2‐(2‐methoxyethoxy)ethyl vinyl ether] pendants and the poly(N‐isopropylacrylamide) segments independently responded to temperature. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Mn~(2 )对聚N鄄异丙基丙烯酰胺的性能影响

合成了聚N鄄异丙基丙烯酰胺(PNIPAM)与Mn2 的配合物,并用荧光光谱、UV鄄Vis、FTIR、XPS进行了初步表征。说明Mn2 与PNIPAM侧链羰基氧或亚氨基氮原子发生了配位作用。由于Mn2 的发射光谱与PNIPAM激发光谱部分重叠以及Mn2 位于561nm的发射峰在Mn2 鄄PNIPAM体系发射光谱中消失,说明发生了较好的F觟rster能量传递。因此,在307nm紫外区荧光强度比PNIPAM增强了314%,使该配合物表现出较好的抑菌效果,而此时少量Mn2 对其低临界溶解温度(LCST)影响不大。     

Temperature-pH Sensitive IPN Hydrogels Composed of Silk Sericin and Poly （N-isopropylacrylamide）

In recent years IPN hydrogels have been attracted attentions as biomedical materials1-3. Among which poly(N-isopropylacrylamide) (PNIPAAm) was frequently used to impart temperature responsive function4, 5. Many of the second components were introduced for…     

Macromolecular design via reversible addition–fragmentation chain transfer (RAFT)/xanthates (MADIX) polymerization

Among the living radical polymerization techniques, reversible addition–fragmentation chain transfer (RAFT) and macromolecular design via the interchange of xanthates (MADIX) polymerizations appear to be the most versatile processes in terms of the reaction conditions, the variety of monomers for which polymerization can be controlled, tolerance to functionalities, and the range of polymeric architectures that can be produced. This review highlights the progress made in RAFT/MADIX polymerization since the first report in 1998. It addresses, in turn, the mechanism and kinetics of the process, examines the various components of the system, including the synthesis paths of the thiocarbonyl‐thio compounds used as chain‐transfer agents, and the conditions of polymerization, and gives an account of the wide range of monomers that have been successfully polymerized to date, as well as the various polymeric architectures that have been produced. In the last section, this review describes the future challenges that the process will face and shows its opening to a wider scientific community as a synthetic tool for the production of functional macromolecules and materials. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43:5347–5393, 2005     

相转变温度范围窄的聚(N-异丙基丙烯酰胺)温敏性微凝胶

采用间歇式、半间歇式和连续式无皂乳液聚合(SFEP)法合成温敏性聚(N-异丙基丙烯酰胺)(PNIPAM)微凝胶。连续式或半间歇式SFEP法合成的PNIPAM微凝胶相转变温度范围明显地比间歇式SFEP法合成的窄,其中又以连续式SFEP法的效果最明显。相同交联剂用量的情况下,连续式SFEP法合成的PNIPAM微凝胶的粒径和溶胀比最大,而间歇式SFEP法合成的最小。通过研究微凝胶合成过程中溶胀比随反应时间的变化关系,证明了连续式或半间歇式SFEP法合成的PNIPAM微凝胶具有比较均匀的内部交联结构。     

Comparative study of classical surfactants and polymerizable surfactants (surfmers) in the reversible addition–fragmentation chain transfer mediated miniemulsion polymerization of styrene and methyl methacrylate

Cationic and anionic amphiphilic monomers (surfmers) were synthesized and used to stabilize particles in miniemulsion polymerization. A comparative study of classical cationic and anionic surfactants and the two surfmers was conducted with respect to the reaction rates and molecular weight distributions of the formed polymers. The reversible addition–fragmentation chain transfer process was used in the miniemulsion polymerization reactions to control the molecular weight distribution. The reaction rates of the surfmer‐stabilized miniemulsion polymerization of styrene and methyl methacrylate were similar (in most cases) to those of the classical‐surfactant‐stabilized miniemulsion polymerizations. The final particle sizes were also similar for polystyrene latexes stabilized by the surfmers and classical surfactants. However, poly(methyl methacrylate) latexes stabilized by the surfmers had larger particle sizes than latexes stabilized by classical surfactants. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 427–442, 2006     

Synthesis of polymer with defined fluorescent end groups via reversible addition fragmentation transfer polymerization for characterizing the conformations of polymer chains in solutions

A new type of chain transfer agent used in reversible addition fragmentation chain transfer (RAFT) polymerization named 9‐anthracenylmethyl (4‐cyano‐4‐(N‐carbazylcarbodithioate) pentanoate) (ACCP) was synthesized with a total yield over 75% by the incorporation of both fluorescent donor and acceptor chromophores. Polymerization of heterotelechelic α,ω end‐labeled dye‐functionalized polystyrene (PS), poly(methyl methacrylate) (PMMA), and poly(n‐butyl methacrylate) (PBMA) with adjustable molecular weights and narrow polydispersity could be conducted by a one‐pot procedure through RAFT polymerization with this bischromophore chain transfer agent. The polymerizations demonstrated “living” controlled characteristics. By taking advantage of the characteristic fluorescence resonance energy transfer (FRET) response between the polymer chain terminals, the variation of chain dimensions in solution from the dilute region to the semidilute region can be monitored by changes in the ratio of the fluorescence intensities of the carbazolyl group to the anthryl group, which lends itself to potential applications in characterizing chain dimensions in solutions for thermodynamic or dynamic studies. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2413–2420     

Synthesis of poly(methyl acrylate) loops grafted onto silica nanoparticles via reversible addition‐fragmentation chain transfer polymerization

Reversible addition‐fragmentation chain transfer (RAFT) polymerization was used to produce poly(methyl acrylate) (pMA) loops grafted onto silica nanoparticles using doubly anchored bifunctional RAFT agents 1,4‐bis(3′‐trimethoxysilylpropyltrithiocarbonylmethyl)benzene (Z‐group approach) and 1,6‐bis(o,p‐2′‐trimethoxysilylethylbenzyltrithiocarbonyl)hexane (R‐group approach) as mediators. In both cases, molecular weights of the resulting surface‐confined polymer loops increased with monomer conversion, whereas the grafting density was significantly higher in the case of the R‐group supported RAFT polymerization due to mechanistic differences of the RAFT process at the surface. This result was evident from thermogravimetric analysis and supported by scanning electron microscopy. Polymer loops with molecular weights up to 53,000 g mol^?1 were accessible with polydispersities of about 2.0 without and 1.5 with the addition of free RAFT agent. UV signals of the detached pMA loops measured via size exclusion chromatography were shifted to higher molecular weights compared with the corresponding RI signals, indicating branching reactions caused by the close proximity of growing radicals and polymer at the surface of the silica nanoparticles. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7656–7666, 2008     

Preparation of a Novel Copolymer of Hyperbranched Polyglycerol with Multi-arms of Poly(N-isopropylacrylamide)

A novel copolymer (PG‐PNIPAM) composed of polyglycerol (PG) as core and poly(N‐isopropylacrylamide) (PNIPAM) as arms was prepared by the radical addition‐fragmentation transfer polymerization (RAFT) of NIPAM in the presence of PG with multi‐trithiolcarbonate groups (PG‐TTC). The results showed that the RAFT polymerization was controllable and nearly all trithiolcarbonates groups on PG took part in the polymerization. The final PG‐PNIPAM copolymer showed a thermally dependent hydrophobic/hydrophilic transition around 28–30°C.     

Synthesis of Surface-Functionalized Poly(styrene-co-butadiene) Nanoparticles via Controlled/Living Radical Mini-emulsion Copolymerization Stabilized by Ammonolyzed Poly(styrene-alt-maleic anhydride) (SMA) RAFT Agent

A process for reversible addition-fragmentation chain transfer (RAFT) radical polymerization in a mini-emulsion system stabilized by ammnolyzed poly(styrene-alt- maleic anhydride) copolymer (SMA) as an amphiphilic macro RAFT agent has been applied to the copolymerization of styrene and butadiene to prepare nanoparticles. First, for the RAFT polymerization of styrene, the results of molecular weights (Mns) and polydispersity index (PDIs) determined by GPC showed that the RAFT mini-emulsion polymerization of styrene exhibited good controlled/living nature with a lower degree of aminolysis (～30%). Second, for the copolymerization of styrene and butadiene, before the gel point the molecular weight growth was followed during the polymerization by GPC and the results revealed that the GPC curve moves to the higher molecular weight indicating the formation of the copolymer. At low conversion, molecular weights (Mns) are in good agreement with theoretical prediction. The microphase separation of the copolymer nanoparticles was confirmed by transmission electron microscopy (TEM).     

Reversible addition–fragmentation transfer (RAFT) copolymerization of methyl methacrylate and styrene in miniemulsion

In the reversible addition–fragmentation transfer (RAFT) copolymerization of two monomers, even with the simple terminal model, there are two kinds of macroradical and two kinds of polymeric RAFT agent with different R groups. Because the structure of the R group could exert a significant influence on the RAFT process, RAFT copolymerization may behave differently from RAFT homopolymerization. The RAFT copolymerization of methyl methacrylate (MMA) and styrene (St) in miniemulsion was investigated. The performance of the RAFT copolymerization of MMA/St in miniemulsion was found to be dependent on the feed monomer compositions. When St is dominant in the feed monomer composition, RAFT copolymerization is well controlled in the whole range of monomer conversion. However, when MMA is dominant, RAFT copolymerization may be, in some cases, out of control in the late stage of copolymerization, and characterized by a fast increase in the polydispersity index (PDI). The RAFT process was found to have little influence on composition evolution during copolymerization. The synthesis of the well‐defined gradient copolymers and poly[St‐b‐(St‐co‐MMA)] block copolymer by RAFT miniemulsion copolymerization was also demonstrated. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6248–6258, 2004