Vibrational spectroscopy analysis of ion conduction mechanism in dispersed phase polymer nanocomposites

A novel combination of dispersed phase polymer nanocomposite electrolyte based on PEO₈‐LiClO₄+ x wt % nano‐CeO₂ has been investigated. A model for ion transport mechanism has been proposed to account for substantial enhancement of its electrical conductivity by ～ 2 orders of magnitude at low volume fraction of the filler reinforcement in the polymer nanocomposite films. The strength of the proposed model is based on unambiguous evidences from FTIR, TEM, and conductivity analysis. The FTIR results provide clear role of nanofiller concentration on ion–ion interaction quantified in terms of the fraction of free anion and ion‐pairs present in the nanocomposite films and its excellent correlation with conductivity versus filler concentration. The presence of asymmetry in the ν₄(ClO₄^?) band observed at 625 cm^?1 is attributed to its resolved degeneracy suggesting the presence of both uncoordinated and cation‐coordinated ClO₄^? anion in the matrix due to ion–ion and ion–filler interactions assisted by Lewis acid–base interaction. The enhancement in conductivity at low concentration is possibly due to direct interaction of nano‐CeO₂ with both polymer host and anions resulting in the release of ionic charges. Drastic conductivity reduction at higher concentration is related to charge immobilization because of ion/ion‐pair entrapment by local clusters of filler as evidenced in TEM. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 60–71, 2009     

Enhanced zinc ion transport in gel polymer electrolyte: effect of nano-sized ZnO dispersion

The effect of the dispersion of zinc oxide (ZnO) nanoparticles in the zinc ion conducting gel polymer electrolyte is studied. Changes in the morphology/structure of the gel polymer electrolyte with the introduction of ZnO particles are distinctly observed using X-ray diffraction and scanning electron microscopy. The nanocomposites offer ionic conductivity values of >10^?3 S cm^?1 with good thermal and electrochemical stabilities. The variation of ionic conductivity with temperature follows the Vogel–Tamman–Fulcher behavior. AC impedance spectroscopy, cyclic voltammetry, and transport number measurements have confirmed Zn²⁺ ion conduction in the gel nanocomposites. An electrochemical stability window from ?2.25 to 2.25 V was obtained from voltammetric studies of nanocomposite films. The cationic (i.e., Zn²⁺ ion) transport number (t ₊) has been found to be significantly enhanced up to a maximum of 0.55 for the dispersion of 10 wt.% ZnO nanoparticles, indicating substantial enhancement in Zn²⁺ ion conductivity. The gel polymer electrolyte nanocomposite films with enhanced Zn²⁺ ion conductivity are useful as separators and electrolytes in Zn rechargeable batteries and other electrochemical applications.     

Dielectric and conductivity studies of 90 MeV O7+ ion irradiated poly(ethylene oxide)/montmorillonite based ion conductor

In the present work effect of 90 MeV O⁷⁺ ions with five different fluences on poly(ethylene oxide) (PEO)/Na⁺-montmorillonite (MMT) nanocomposites has been investigated. PEO/MMT nanocomposites were synthesized by solution intercalation technique. With the increase in irradiation fluence, gallery spacing of MMT increases in the composite and an exfoliated nanostructure is obtained at the fluence of 5?×?10¹² ions/cm² as revealed by X-ray diffraction results. Highest room temperature ionic conductivity of 4.2?×?10^?6?S?cm^?1 was found for the fluence 5?×?10¹² ions/cm², while the conductivity for unirradiated polymer electrolyte was found to be 7.5?×?10^-8?S?cm^?1. The increase in intercalation of PEO chains inside the galleries of MMT results in the increase in interaction between Na⁺ cation and oxygen heteroatom leading to the increase in ionic conductivity of the composites. Surface morphology and interactions among the various constituents in the nanocomposites at different fluence have been examined by scanning electron microscopy and Fourier transform infrared spectroscopy, respectively. The appearance of peak for each fluence in the loss tangent suggests the presence of relaxing dipoles in the polymer nanocomposite electrolyte films. With the increase in ion fluence the peak shifts towards higher frequency side, suggesting decrease in the relaxation time.     

Effect of EMIMBF4 ionic liquid addition on the structure and ionic conductivity of LiBF4-complexed PVdF-HFP polymer electrolyte films

New polymer electrolyte films of lithium tetrafluoroborate (LiBF₄)-complexed poly(vinylidene fluoride-co-hexafluoropropylene) (PVdF-HFP) embedded with different quantities of 1-ethyl-3methylimidazolium tetrafluoroborate (EMIMBF₄) ionic liquid were prepared by solution casting. The prepared films were characterized using various techniques: X-ray diffraction, scanning electron microscopy, impedance spectroscopy and electrochemical measurements. The pure PVdF-HFP possessed a semi-crystalline structure and its amorphicity increased with the addition of LiBF₄ salt and EMIMBF₄ ionic liquid. The size and interconnection of pores in the films were enhanced by EMIMBF₄. Impedance measurements indicated that the room-temperature ionic conductivity of the films increased with increasing EMIMBF₄ concentration until 15 wt.%, being up to 0.202 × 10⁻⁴ S cm⁻¹, and then decreased with further increasing EMIMBF₄ concentration. In addition, the temperature-dependent ionic conductivity of the polymer electrolyte films followed an Arrhenius relation and the 15 wt.% EMIMBF₄-incorporated gel polymer electrolyte film exhibited a low activation energy for ionic conduction, being about 0.28 eV. Finally, the electrochemical stability window of the 85PVdF-HFP:15LiBF₄+15 EMIMBF₄ gel polymer electrolyte films was evaluated as approximately 4.4 V, which is a promising value for ion battery applications.     

Effect of ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide on the properties of poly(glycidyl methacrylate) based solid polymer electrolytes

A free standing polymer electrolytes films, containing poly(glycidyl methacrylate) (PGMA) as the polymer host, lithium perchlorate (LiClO₄), and ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl) imide [Bmim][TFSI] as a plasticizer was successfully prepared via the solution casting method. The XRD analysis revealed the amorphous nature of the electrolyte. ATR-FTIR and thermal studies confirmed the interaction and complexation between the polymer host and the ionic liquid. The maximum ionic conductivity of the solid polymer electrolyte was found at 2.56 × 10^–5 S cm^–1 by the addition of 60 wt % [Bmim][TFSI] at room temperature and increased up to 3.19 × 10^–4 S cm^–1 at 373 K, as well as exhibited a transition of temperature dependence of conductivity: Arrhenius-like behavior at low and high temperatures.     

Ultraviolet-Cured Semi-Interpenetrating Network Polymer Electrolytes for High-Performance Quasi-Solid-State Lithium Metal Batteries

Solid polymer electrolytes with relatively low ionic conductivity at room temperature and poor mechanical strength greatly restrict their practical applications. Herein, we design semi-interpenetrating network polymer (SNP) electrolyte composed of an ultraviolet-crosslinked polymer network (ethoxylated trimethylolpropane triacrylate), linear polymer chains (polyvinylidene fluoride-co-hexafluoropropylene) and lithium salt solution to satisfy the demand of high ionic conductivity, good mechanical flexibility, and electrochemical stability for lithium metal batteries. The semi-interpenetrating network has a pivotal effect in improving chain relaxation, facilitating the local segmental motion of polymer chains and reducing the polymer crystallinity. Thanks to these advantages, the SNP electrolyte shows a high ionic conductivity (1.12 mS cm⁻¹ at 30 °C), wide electrochemical stability window (4.6 V vs. Li⁺/Li), good bendability and shape versatility. The promoted ion transport combined with suppressed impedance growth during cycling contribute to good cell performance. The assembled quasi-solid-state lithium metal batteries (LiFePO₄/SNP/Li) exhibit good cycling stability and rate capability at room temperature.     

A 3D Nanostructured Hydrogel‐Framework‐Derived High‐Performance Composite Polymer Lithium‐Ion Electrolyte

Solid‐state electrolytes have emerged as a promising alternative to existing liquid electrolytes for next generation Li‐ion batteries for better safety and stability. Of various types of solid electrolytes, composite polymer electrolytes exhibit acceptable Li‐ion conductivity due to the interaction between nanofillers and polymer. Nevertheless, the agglomeration of nanofillers at high concentration has been a major obstacle for improving Li‐ion conductivity. In this study, we designed a three‐dimensional (3D) nanostructured hydrogel‐derived Li_0.35La_0.55TiO₃ (LLTO) framework, which was used as a 3D nanofiller for high‐performance composite polymer Li‐ion electrolyte. The systematic percolation study revealed that the pre‐percolating structure of LLTO framework improved Li‐ion conductivity to 8.8×10^?5 S cm^?1 at room temperature.     

Effect of NiO nanofiller concentration on the properties of PEO-NiO-LiClO4 composite polymer electrolyte

Composite polymer electrolyte films comprising polyethylene oxide (PEO) as the polymer host, LiClO₄ as the dopant, and NiO nanoparticle as the inorganic filler was prepared by solution casting technique. NiO inorganic filler was synthesized via sol-gel method. The effect of NiO filler on the ionic conductivity, structure, and morphology of PEO-LiClO₄-based composite polymer electrolyte was investigated by AC impedance spectroscopy, X-ray diffraction, and scanning electron microscopy, respectively. It was observed that the conductivity of the electrolyte increases with NiO concentration. The highest room temperature conductivity of the electrolyte was 7.4?×?10^?4 S cm^?1 at 10 wt.% NiO. The observation on structure shows the highest conductivity appears in amorphous phase. This result has been supported by surface morphology analysis showing that the NiO filler are well distributed in the samples. As a conclusion, the addition of NiO nanofiller improves the conductivity of PEO-LiClO₄ composite polymer electrolyte.     

Basicity‐dependent properties of anion conducting membranes consisting of iminium cations for alkaline fuel cells

To design novel anion‐conducting polymer electrolyte membranes (AEMs), this paper proposes a basicity index (BI) that is defined by the ion‐exchange ratios of AEMs from the OH^? to Cl^? forms in a neutral aqueous solution as a parameter for Arrhenius basicity (dissociation constant). Using a radiation‐induced graft polymerization technique, three iminium cations are introduced into fluorinated polymer films. The BI of the iminium‐containing AEMs is less than that of a conventional ammonium‐type AEM. The conductivity and water uptake correlate positively with the BI, whereas the thermal and chemical stabilities correlate negatively with the BI. The dependence on the BI stems from the stabilization of the iminium hydroxide in proportion to the basicity of the original diaza‐compounds, resulting in a decrease in conductivity and water uptake with keeping higher thermal and chemical stabilities. Notably, ion conductivity is sufficient and water uptake is less in AEMs with a medium BI. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 503–510     

Evaluation of proton conductivity of sulfonated polyimide/dihydroxy naphthalene charge‐transfer complex hybrid membranes

Sulfonated polyimide (SPI)/dihydroxynaphthalene (DHN) charge‐transfer (CT) complex hybrid films were investigated as possible alternative for polymer electrolyte membranes in polymer electrolyte fuel cells. SPI/DHN CT complex hybrid films include CT complexes, which might work as electronic conductors, and sulfonic acid units, which could work as proton conductors. Therefore, the origin of the conductivity of SPI/DHN complex hybrid films was evaluated by four‐probe impedance measurements in the through‐plane direction of the films. The obtained conductivity of the CT complex hybrid films increased with the increase of ion exchange capacity of the CT films and the decrease of CT complex concentration in the films. These results indicated that proton transfer dominantly occurred in the CT complex hybrid films. Proton conductivity of the CT complex hybrid films consisting of 2,6‐ or 1,5‐DHN showed the similar values, although the molecular geometries of the CT complex were different. The activation energy values for proton conductivity in the CT films were approximately the same as that of Nafion 212. Water uptake (WU) results were also conducted and suggest that CT complex formation could control the degree of WU of the films and prevent dissolution of SPI. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2991–2997     

Effect of TiO2 nanoparticle additions on the conductivity of network polymer electrolytes for lithium power sources

Network copolymer electrolytes were synthesized from polyether (polyester) diacrylates with different structures and chain lengths of polyester diacrylate and polyethylene glycol diacrylate. The optimum matrix for ion transport in the electrolyte was formed from only one type of oligomer. The influence of TiO₂ nanopowder additions (～60 nm) on the conductivity of the copolymer electrolyte was studied. The addition of 10 wt % TiO₂ led to an increase in the conductivity by an order of magnitude at 30°C; the effective activation energy decreased by 20%. At elevated temperatures, the mobility of polymer chains increased and the contribution of TiO₂ nanoparticles in ion transport was only half of the order of magnitude of the conductivity at 100°C. The increase in the conductivity of the polymer electrolyte after the addition of TiO₂ was presumably caused by the formation of a more mobile state of the lithium ion near the nanoparticle surface, as shown by pulsed field gradient (PFG) ⁷Li NMR.     

Structural and electrical properties of polyvinyl alcohol (PVA):Methyl cellulose (MC) based solid polymer blend electrolytes inserted with sodium iodide (NaI) salt

This paper studies the structural and electrical properties of solid polymer blend electrolytes based on polyvinyl alcohol (PVA) and methylcellulose (MC) incorporated with sodium iodide (NaI). The polymer electrolyte films were assembled through a solution casting technique. The host matrix, which is doped with different NaI salt concentrations between 10 and 50 wt%, utilizes the most amorphous blend compositions (60 wt% Polyvinyl alcohol and 40 wt% methylcellulose). The structural behaviour of the electrolyte films was examined utilizing X-ray diffraction (XRD) and Fourier transformation infrared (FTIR) techniques. The semi crystalline nature of PVA:MC with inserted NaI was derived from the X-ray diffraction studies, while the XRD analysis suggests that the highest ion conductive sample displays the minimum crystalline nature. The interaction between polymer blends and inserted salt was conceived from the FTIR investigation. Shifting of peaks and variation in the intensity of FTIR bands was detected. To investigate the structural properties and calculate the degree of crystallinity of the films, the (XRD) technique was employed, while electrical impedance spectroscopy (EIS) was utilized for studying the conductivity of the samples. In order to comprehend all of the electrical properties of the ion-conducting systems, the EIS outcome of each electrolyte was matched with Equivalent Electrical Circuits (EEC) s. Ion transport parameters including mobility, carrier density and diffusion are well assessed for the samples and the dielectric properties were compared with the conductivity measurement. At lower frequencies, the dielectric constant was elevated and dielectric loss was detected. Loss tangent and electric modulus plots were used to study the relaxation nature of the samples. The highest ambient temperature conductivity of PVA loaded 50 wt% of NaI was determined to be 1.53 × 10⁻⁵ S/cm. The loss tangent relaxation peak shifts towards high-frequency side which indicates the decrease of relaxation time and faster ion dynamics.     

Experimental Investigations on Highly Conducting Solid Bio-Polymer Electrolytes Based on Latex of Calotropis gigantea Plant

The study has prepared highly conducting polymer electrolyte films using solution cast technique with poly(vinylidene fluoride-co-hexafluoropropylene) PVDF-HFP, mixture of ethylene carbonate (EC), and propylene carbonate (PC) as plasticizer and latex of Calotropis gigantea (CGL) as an ionic source. In this study, four films are prepared using PVDF-HFP:CGL in ratio 1:1 with the increasing concentration of EC+PC as 1, 2, 3, and 4 M named as 1:1:1, 1:1:2, 1:1:3, 1:1:4. The prepared polymer electrolyte is examined by polarized optical microscopy (POM), elemental dispersive X-ray technique (EDX), and complex impedance spectroscopy. EDX and POM are studied for the surface morphology of all prepared samples and to investigate the porous nature of films. The enhancement in ionic conductivity occurs due to CGL and increasing amount of EC-PC. Conductivity of highest composition (1:1:4) polymer electrolyte film is found to be ≈10⁻³ S cm⁻¹. The optimized polymer electrolyte film is considered as a promising candidate for application in supercapacitors.     

Polymer electrolyte membranes by in situ polymerization of poly(ethylene carbonate‐co‐ethylene oxide) macromonomers in blends with poly(vinylidene fluoride‐co‐hexafluoropropylene)

Salt‐containing membranes based on polymethacrylates having poly(ethylene carbonate‐co‐ethylene oxide) side chains, as well as their blends with poly(vinylidene fluoride‐co‐hexafluoropropylene) (PVDF‐HFP), have been studied. Self‐supportive ion conductive membranes were prepared by casting films of methacrylate functional poly(ethylene carbonate‐co‐ethylene oxide) macromonomers containing lithium bis(trifluorosulfonyl)imide (LiTFSI) salt, followed by irradiation with UV‐light to polymerize the methacrylate units in situ. Homogenous electrolyte membranes based on the polymerized macromonomers showed a conductivity of 6.3 × 10^?6 S cm^?1 at 20 °C. The preparation of polymer blends, by the addition of PVDF‐HFP to the electrolytes, was found to greatly improve the mechanical properties. However, the addition led to an increase of the glass transition temperature (T_g) of the ion conductive phase by ～5 °C. The conductivity of the blend membranes was thus lower in relation to the corresponding homogeneous polymer electrolytes, and 2.5 × 10^?6 S cm^?1 was recorded for a membrane containing 10 wt % PVDF‐HFP at 20 °C. Increasing the salt concentration in the blend membranes was found to increase the T_g of the ion conductive component and decrease the propensity for the crystallization of the PVDF‐HFP component. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 79–90, 2007     

Single Lithium‐Ion Conducting Polymer Electrolytes Based on a Super‐Delocalized Polyanion

A novel single lithium‐ion (Li‐ion) conducting polymer electrolyte is presented that is composed of the lithium salt of a polyanion, poly[(4‐styrenesulfonyl)(trifluoromethyl(S‐trifluoromethylsulfonylimino)sulfonyl)imide] (PSsTFSI^?), and high‐molecular‐weight poly(ethylene oxide) (PEO). The neat LiPSsTFSI ionomer displays a low glass‐transition temperature (44.3 °C; that is, strongly plasticizing effect). The complex of LiPSsTFSI/PEO exhibits a high Li‐ion transference number (t_Li⁺=0.91) and is thermally stable up to 300 °C. Meanwhile, it exhibits a Li‐ion conductivity as high as 1.35×10^?4 S cm^?1 at 90 °C, which is comparable to that for the classic ambipolar LiTFSI/PEO SPEs at the same temperature. These outstanding properties of the LiPSsTFSI/PEO blended polymer electrolyte would make it promising as solid polymer electrolytes for Li batteries.     

Dual-phase solid polymer electrolytes prepared from styrene–butadiene copolymer latices

A new dual-phase solid polymer electrolyte system has been proposed. In this system, a network of ion pathways is formed in a low-polarity, host polymer matrix. A series of electrolytes were prepared from styrene-butadiene copolymer latices with dissolved lithium salts. Polymer films were formed from these latices, and then impregnated with γ-butyrolactone (γ-BL) or γ-butyrolactone/dimethoxyethane mixture (γ-BL/DME), giving latex polymer electrolytes. The ionic conductivity of the polymer electrolyte system increased with increasing solvent content, although a distinct percolation threshold was not measured. Ionic conductivity also increased with the use of DME cosolvent, with the highest conductivity being 1.4 × 10^?4S/cm. Complex impedance diagrams are discussed. The diagrams show significant deviations from the ideal. TEM/SEM observations are consistent with the desired dual-phase morphology. © 1993 John Wiley & Sons, Inc.     

Synthesis and properties of all solid polymer electrolytes based on poly(vinyl acetate‐co‐acetyl ethylene oxide acrylate)

Poly(acetyl ethylene oxide acrylate‐co‐vinyl acetate) (P(AEOA‐VAc)) was synthesized and used as a host for lithium perchlorate to prepare an all solid polymer electrolyte. Introduction of carbonyl groups into the copolymer increased ionic conductivity. All solid polymer electrolytes based on P(AEOA‐VAc) at 14.3 wt% VAc with 12wt% LiClO₄ showed conductivity as high as 1.2 × 10^?4 S cm^?1 at room temperature. The temperature dependence of the ionic conductivity followed the VTF behavior, indicating that the ion transport was related to segmental movement of the polymer. FTIR was used to investigate the effect of the carbonyl group on ionic conductivity. The interaction between the lithium salt and carbonyl groups accelerated the dissociation of the lithium salt and thus resulted in a maximum ionic conductivity at a salt concentration higher than pure PAEO‐salts system. Copyright © 2010 John Wiley & Sons, Ltd.     

Preparation of a Star Network PEG-based Gel Polymer Electrolyte and Its Application to Electrochromic Devices

A star network polymer with a pentaerythritol core linking four PEG-block polymeric arms was synthesized, and its corresponding gel polymer electrolyte based on lithium perchlorate and plasticizers EC/PC with the character being colorless and highly transparent has been also prepared. The polymer host was characterized and confirmed to be of a star network and an amorphous structure by FTIR, ^1H NMR and XRD studies. The polymer host hold good mechanical properties for pentaerythritol cross-linking. Maximum ionic conductivity of the prepared polymer electrolyte has reached 8.83 × 10 ^-4 S·cm^-1 at room temperature. Thermogravimetry （TG） of the polymer electrolyte showed that the thermal stability was up to at least 150 ℃. The gel polymer electrolyte was further evaluated in electrochromic devices fabricated by transparent PET-ITO and electrochromically active viologen derivative films, and its excellent performance promised the usage of the gel polymer electrolyte as ionic conductor material in electrochrornic devices.     

Studies on structure property relationship in a polymer–clay nanocomposite film based on (PAN)8LiClO4

A new combination of ionically conducting polymer–clay nanocomposites based on (PAN)₈LiClO₄ + x wt % montmorillonite (unmodified) clay has been prepared using the standard solution cast process. X-Ray diffraction (XRD) analysis reveals strong interaction of polymer salt complex (PS) with the montmorillonite matrix evidenced by changes in d₀₀₁ spacing of the clay and enhancement in the clay gallery width on composite formation possibly due to intercalation of polymer–salt complex into nanometric clay galleries. Evidences of such an interaction among polymer–ion–clay components of the composite matrix has also been observed in the Fourier transform infrared (FTIR) spectrum results. FTIR results clearly indicated cation (Li⁺) coordination at nitrile (CN) site of the polymer backbone along with appearance of a shoulder suggesting strong evidence of polymer–ion interaction. Addition of clay into the PS matrix has been observed to affect ion–ion interaction resulting from ion dissociation effect at low clay loading in the PNC films. Complex impedance spectroscopy (CIS) analysis has provided a response comprising of a semicircular arc followed by a spike attributed respectively, to the bulk conduction and electrode polarization at the interfaces. Electrical transport appears to be predominantly ionic (t_ion = 0.99) with significant improvement in the electrical conductivity and thermal stability properties. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2577–2592, 2008     

Design of Single Ionic Conduction in Polymeric Solid Electrolytes

Oligo(oxyethylene) methacrylate, MEO, has been synthesized as a basic material to design a polymeric solid electrolyte. The homopolymer P(MEO) has a glass transition temperature of -78°C. P(MEO) solubilizes inorganic salts without solvent, and the dissociated ions migrate fast to give very high ionic conductivity, above 10^?5 S/cm for ac. Although the ac conductivity is high, the current decreases gradually under dc conditions. This is improved by the design of an ionic conductor using only cations. Poly[oligo(oxyethylene) methacrylate-co-alkali metal methacrylate], P(MEO-MAM), is prepared as an organic solid electrolytes which allows cationic single-ion conduction. The ionic conductivity of the films depends on the electrolyte content, the dissociation energy of the comonomeric electrolytes, and the degree of segmental motion surrounding the ions in the polymer matrix. The ionic conductivity of Li or K is around 10^?6 S/cm in these polymeric systems at 80°C. The plot of logarithmic conducticity vs reciprocal absolute temperature is a curved line. The Williams-Landel-Ferry parameters, calculated from the temperature dependence of the conductivity, coincided with theoretical values within a certain range. The single-ion conduction in these films is concluded to be affected considerably by the segmental motion of the matrix polymer. This is also confirmed by the Vogel-Tammann-Fulcher plot.