Optimization of interactions between a cationic conjugated polymer and chromophore-labeled DNA for optical amplification of fluorescent sensors

Cationic conjugated polymers (CCPs) have been widely utilized as signal amplifiers in biosensors to improve the detection sensitivity through fluorescence resonance energy transfer (FRET) from CCPs to dye-labeled probes or targets. This paper investigates the effect of sodium dodecyl sulfate (SDS) on energy transfer between a cationic polyfluoreneethynylene copolymer (P1) and Texas Red labeled single-stranded DNA (ssDNA-TR). The presence of SDS in solution affects both the optical properties of P1 and TR emission within P1/ssDNA-TR complexes, which provides basic information on the role of SDS in FRET between P1 and ssDNA-TR. Although the quantum yield of P1 decreases in the presence of low concentrations of SDS, the presence of SDS reduces TR fluorescence quenching within P1/ssDNA-TR complexes and increases the number of optically active polymer repeat units within the proximity of TR, which are beneficial to P1-sensitized TR emission. In the absence of SDS, FRET from P1 to ssDNA-TR provides a 2.6-fold enhancement in TR emission intensity as compared to that upon direct excitation of TR at 595 nm. At the optimum SDS concentration (5 microM), P1-sensitized TR signal output increases to 11.3-fold relative to direct excitation of TR. This study highlights the importance of modulation of the CCP/ssDNA-dye interaction in improving the signal output of dye-labeled DNA by CCP through FRET.     

PNA/dsDNA complexes: site specific binding and dsDNA biosensor applications

The ability of peptide nucleic acids (PNA) to form specific higher-order (i.e., three- and four-stranded) complexes with DNA makes it an ideal structural probe for designing strand-specific dsDNA biosensors. Higher-order complexes are formed between a dye-labeled charge-neutral PNA probe and complementary dsDNA. Addition of a light-harvesting cationic conjugated polymer (CCP) yields supramolecular structures held together by electrostatic forces that incorporate the CCP and the dye-labeled PNA/DNA complexes. Optimization of optical properties allows for excitation of the CCP and subsequent fluorescence resonance energy transfer (FRET) to the PNA-bound dye. In the case of noncomplementary dsDNA, complexation between the probe and target does not occur, and dye emission is weak. The binding between PNA and noncomplementary and complementary dsDNA was examined by several methods. Gel electrophoresis confirms specificity of binding and the formation of higher-order complexes. Nano-electrospray mass spectrometry gives insight into the stoichiometric composition, including PNA/DNA, PNA(2)/DNA, PNA/DNA(2), and PNA(2)/DNA(2) complexes. Finally, structural characteristics and binding-site specificity were examined using ion mobility mass spectrometry in conjunction with molecular dynamics. These results give possible conformations for each of the higher-order complexes formed and show exclusive binding of PNA to the complementary stretch of DNA for all PNA/DNA complexes. Overall, the capability and specificity of binding indicates that the CCP/PNA assay is a feasible detection method for dsDNA and eliminates the need for thermal denaturing steps typically required for DNA hybridization probe assays.     

A novel fluorescent biosensor for sequence-specific recognition of double-stranded DNA with the platform of graphene oxide

A fluorescent biosensor for sequence-specific recognition of double-stranded DNA (dsDNA) was developed based upon the DNA hybridization between dye-labeled single-stranded DNA (ssDNA) and double-stranded DNA. The fluorescence of FAM-labeled single-stranded DNA was quenched when it adsorbed on the surface of graphene oxide (GO). Upon addition of the target dsDNA, a homopyrimidine·homopurine part of dsDNA on the Simian virus 40 (SV40) (4424-4440, gp6), hybridization occurred between the dye-labeled DNA and the target dsDNA, which induced the dye-labeled DNA desorbed from the surface of GO, and turned on the fluorescence of the dye. Under the optimum conditions, the enhanced fluorescence intensity was proportional to the concentration of target dsDNA in the range 40.0-260 nM, and the detection limit was found to be 14.3 nM alongside the good sequence selectivity.     

Nucleic acid detection using carbon nanoparticles as a fluorescent sensing platform

In this communication, we demonstrate for the first time the proof of concept that carbon nanoparticles (CNPs) can be used as an effective fluorescent sensing platform for nucleic acid detection with selectivity down to single-base mismatch. The dye-labeled single-stranded DNA (ssDNA) probe is adsorbed onto the surface of the CNP via π-π interaction, quenching the dye. In the target assay, a double-stranded DNA (dsDNA) hybrid forms, recovering dye fluorescence.     

Cyclically amplified fluorescent detection of theophylline and thiamine pyrophosphate by coupling self-cleaving RNA ribozyme with endonuclease

A structure-switching-based approach for the design of fluorescent biosensors from known RNA aptazymes were demonstrated for the detection of theophylline and thiamine pyrophosphate (TPP). Taking advantages of the ability of graphene oxide (GO) to protect ssDNA from nuclease cleavage and the cyclic amplification induced by deoxyribonuclease I (DNase I), the amplified assay showed high sensitivity. In the presence of target, the target-dependent hammerhead aptazyme cleaves off. The released Shine–Dalgarno (SD) sequence was introduced into the detection system, in which a FAM labeled probe ssDNA was noncovalently assembled on GO, and the fluorescence of the dye was completely quenched. In the presence of the released sequence, the binding between the dye-labeled DNA and the SD sequence alter the conformation of dye-labeled DNA, and disturb the interaction between the dye-labeled DNA and GO, liberating dye-labeled DNA from GO. The fluorescent intensity was increased, whereupon the DNase I can cleave the free DNA in the DNA/RNA complex, thereby liberating the fluorophore and ultimately releasing the SD RNA sequence. The released SD RNA sequence then binds another DNA probe, and the cycle starts anew, which leads to significant amplification of the fluorescent signal. The strategy showed good sensitivity and the dynamic ranges were of 0.1–10 μM and 0.5–100 μM for theophylline and TPP, respectively. The approach opens up a wide range of possibilities for sensing of other small molecules in biological entities.     

荧光标记DNA高分辨电感耦合等离子质谱定量分析

建立了基于磷元素测量的高分辨电感耦合等离子质谱定量荧光标记DNA的分析方法,该方法定量测量结果可以溯源到国际基本单位（SI）。采用柱层析、超速离心、透析的技术对样品进行纯化,用芯片电泳和电导率测试仪对其进行了纯度检验。然后利用优化后的微波消解方法对荧光标记DNA样品进行了消解处理。从射频功率、等离子气流速、辅助气流速、雾化气流速、采样深度、获取时间等方面对高分辨电感耦合等离子质谱测量条件进行了优化,从物理性干扰、内标、同位素、元素形态等方面对测量进行了校正。利用优化后的方法对荧光标记DNA样品进行了定量测量,从方法的精密度、标准物质、样品称量、标准和样品稀释等方面进行了定量测量结果不确定度的评估。测量结果的扩展不确定度为8.28%(k=2),远优于现在常规的紫外、荧光、色谱测量核酸含量的不确定度。该方法可用于核酸含量标准物质的定值分析。     

Spectroscopic Properties of Fluorescein and Rhodamine Dyes Attached to DNA

We report the spectroscopic properties of fluorescein, x-rhodamine, tetramethyl-rhodamine, attached to single strand, duplex DNA, and to the digestion products by DNAse I. The properties reported include: molar absorptivity, quantum yield, absorbance and fluorescence spectra, fluorescence lifetime, intrinsic lifetime (τ⁰), static quenching (S) and the Förster critical distances (R₀) between fluorescein and x-rhodamine or tetramethyl-rhodamine (acceptors). These spectroscopic properties depend strongly on the local dye environment. Fluorescein was studied: (1) attached to biotin (BF), (2) BF bound to avidin; and attached to two positions in DNA. X-rhodamine and tetramethyl-rhodamine were studied as free dyes and attached at the 5′-end of DNA. We propose a general method to determine the molar absorptivity and τ⁰ of a dye attached to DNA based on the reaction of a biotinylated and dye-labeled oligomer with standardized avidin. The molar absorptivity of a second dye attached to a DNA duplex can be obtained by comparing spectra of doubly and singly labeled sequences. S, arising from dye–DNA interactions can then be determined. R₀ for free and attached dyes showed differences from 1.1 to 4.2 Å. We present evidence for the direct interaction of dyes attached to the termini of various single-stranded DNA sequences.     

Mono- and bis-intercalating dyes for multiplex fluorescence lifetime detection of DNA restriction fragments in capillary electrophoresis

The use of novel intercalating dyes as labels in DNA restriction fragment analysis by capillary electrophoresis with frequency-domain fluorescence lifetime detection is described. The dyes, including one mono-intercalating dye with three positive charges and three bis-intercalating, homodimeric dyes with four positive charges, were excited by the 488 nm line of an argon ion laser and exhibited lifetimes in the range of 1-3 ns. The separations were performed using a gel containing 1% high-molecular-weight (HMW) hydroxyethylcellulose (HEC) (90,000-105,000) and 0.3% low-molecular-weight (LMW) HEC (24,000-27,000) in Tris-borate-EDTA buffer (TBE). Multiplex lifetime detection of mixtures of dye-labeled DNA restriction fragment digests and size standard fragments was achieved. Compared to previous results obtained with several mono-intercalating dyes of lesser charge (McIntosh, S. L., Nunnally, B. K., Nesbit, A. R., Deligeorgiev, T. G., Gadjev, N. I., McGown, L. B., Anal. Chem. 2000, 72, 5444-5449), the present dyes provided a wider range of lifetimes and better lifetime discrimination in multiplex detection. There was no evidence of dye exchange during the capillary electrophoresis experiment.     

Poly(o-phenylenediamine) colloid-quenched fluorescent oligonucleotide as a probe for fluorescence-enhanced nucleic acid detection

In this Letter, we demonstrate that chemical oxidation polymerization of o-phenylenediamine (OPD) by potassium bichromate at room temperature results in the formation of submicrometer-scale poly(o-phenylenediamine) (POPD) colloids. Such colloids can absorb and quench dye-labeled single-stranded DNA (ssDNA) very effectively. In the presence of a target, a hybridization event occurs, which produces a double-stranded DNA (dsDNA) that detaches from the POPD surface, leading to recovery of dye fluorescence. With the use of an oligonucleotide (OND) sequence associated with human immunodeficiency virus (HIV) as a model system, we demonstrate the proof of concept that POPD colloid-quenched fluorescent OND can be used as a probe for fluorescence-enhanced nucleic acid detection with selectivity down to single-base mismatch.     

Comparative microRNA detection from precursor-microRNA-transfected hepatocellular carcinoma cells by capillary electrophoresis with dual-color laser-induced fluorescence

A dual-LIF (dLIF) setup combined with CE for microRNA (miRNA) detection is proposed in this study. An argon ion laser (488 nm) and a solid state laser (640 nm) were chosen to excite the fluorescent dye-labeled DNA probe after splinted ligation of miRNA. The crosstalk of emission spectrum of Alex Fluor 488 and Alex Fluor 647 is minimized with a zero crosstalk matrix for Alex Fluor 647 to 488 channels. The linear ranges of the device for the fluorescent dye-labeled DNA probe were both from 1.0 nM to 0.1 pM. The limits of detection for Alexa Fluor 488-labeled DNA and Alex Fluor 647-labeled DNA were 9.3 and 31 fM, respectively. The detection of specific miRNA has been accomplished by combining splinted ligation with the fluorescent dye-labeled oligonucleotides. The linear range for the synthetic miRNA is from 1.0 nM to 1.0 pM. Without PCR amplification, CE-dLIF was applied to discriminate a pre-miR-10b*-transfected cells (contains precursor miR-10b*) from hepatocellular carcinoma cell (control cells). Therefore, this result indicates CE-dLIF has great potential to provide a rapid comparative assay for miRNAs detection.     

Fluorescence enhancement at hot-spots: the case of Ag nanoparticle aggregates

We report the enhancement of the fluorescence emitted from dye-labeled DNA upon co-aggregation with silver nanoparticles. The co-aggregation process is induced by the polycationic molecule spermine, which both neutralizes the charge of the DNA backbone and aggregates the nanoparticles. This simple method generates nanoparticle aggregates with very short (1-2 nm) inter-particle distance. Even though no spacer layer was used, large enhancements of the fluorescence, in the range of 15-740× (depending on the original quantum yield of the dye used), were observed. Theoretical modeling shows that this occurs as the local enhancement of the electromagnetic field near the hotspots is sufficiently large to overcome the quenching by the surface, even at short distances of 1 nm. The predicted trend of increased SEF enhancement with a decrease in initial quantum yield is observed. The average enhancements observed in this system are on-par with the best results obtained on nanostructured surfaces to date.     

Surfactant-induced aggregation patterns of thiazole orange: a photophysical study

The aggregation behavior of the DNA marker dye thiazole orange (TO), has been investigated in two types of surfactant assemblies, namely, premicelles/micelles of sodium dodecyl sulfate (SDS) and pre reverse micelles/reverse micelles of sodium bis(2-ethylhexyl) sulfosuccinate (AOT). In the case of an SDS/water system, absorption spectral changes of TO signify the formation of H-aggregates and H-dimers of the dye at premicellar concentrations, which subsequently convert to the monomeric form beyond the critical micellar concentration (cmc). Interestingly, the observed changes in the absorption and emission characteristics due to the surfactant-induced formation of H-aggregates/dimers of TO are found to be useful to estimate the surfactant concentration parameters for premicellar aggregation of SDS. In the case of an AOT/n-heptane system, similarly, H-aggregates/dimers are observed at low AOT concentrations, below the cmc. However, in this case, the H-dimers persist even beyond the cmc. This is attributed to the strong tendency of TO for self-aggregation and its favorable electrostatic interactions with the AOT head groups. With increasing water content in the AOT reverse micelles, the hydration of the dye leads to the conversion of H-dimers to the monomeric form. The steady-state fluorescence results are nicely corroborated with those from time-resolved fluorescence studies and demonstrate the interesting behavior of the surfactant-induced aggregation of TO dye.     

Photoinactivation of Sindbis Virus Infectivity Without Inhibition of Membrane Fusion

Photoinactivation of enveloped viruses is commonly associated with damage to fusion proteins and inhibition of membrane fusion capacity. Here we show that photobleaching of Sindbis virus labeled with the membrane localized dye, R18 (octadecyl rhodamine B) causes a dramatic loss of infectivity without observable changes in low-pH triggered membrane fusion to liposomes. Sindbis labeled with DiI (1,1'-dioctadecyl-3,3,3',3'-tetramethylindocarbocyanine perchlorate) also maintains low-pH triggered membrane fusion capacity, but in contrast to R18, extensive photobleaching of DiI-labeled virus has little effect on infectivity. Electrophoretic gel analysis suggests no cross-linking of viral fusion proteins following photobleaching of dye-labeled Sindbis. These observations have implications for live-cell, single particle tracking studies of dye-labeled Sindbis virus. Our observations suggest that R18 and DiI have different propensities for spontaneous flip-flop in lipid bilayers.     

Shape-specific detection based on fluorescence resonance energy transfer using a flexible water-soluble conjugated polymer

We present the detection of the shape-specific conformation of DNA based on the fluorescence resonance energy transfer (FRET) by using a novel flexible water-soluble cationic conjugated polymer (CCP). The flexible backbone of CCP has more conformational freedom with the potential to be responsive to analyte shape by electrostatic interaction between flexible CCP and negatively charged DNA. The analyte shape dependent recognition is accomplished by structural changes that compressed or extended the flexible CCP. The morphology-dependent spectral properties of the novel flexible polymer related to the analyte shapes are investigated in detail, where two types of chromophores, referred to as "isolated" segment and "packed" segment aggregates, within the flexible polymer are identified by means of ensemble and single molecule measurements upon binding with different geometric DNA. The change in fluorescence intensity upon binding with shape-specific DNA without obvious color shifts makes this novel flexible polymer a suitable CCP donor for FRET measurements. The results provide insights for understanding the spectral properties of flexible water-soluble CCP and CCP/DNA interaction related to the geometry of target analyte.     

Photocrosslinking Probes Proximity of Thymine Modifiers Tethering Excitonically Coupled Dye Aggregates to DNA Holliday Junction

A DNA Holliday junction (HJ) has been used as a versatile scaffold to create a variety of covalently templated molecular dye aggregates exhibiting strong excitonic coupling. In these dye-DNA constructs, one way to attach dyes to DNA is to tether them via single long linkers to thymine modifiers incorporated in the core of the HJ. Here, using photoinduced [2 + 2] cycloaddition (photocrosslinking) between thymines, we investigated the relative positions of squaraine-labeled thymine modifiers in the core of the HJ, and whether the proximity of thymine modifiers correlated with the excitonic coupling strength in squaraine dimers. Photocrosslinking between squaraine-labeled thymine modifiers was carried out in two distinct types of configurations: adjacent dimer and transverse dimer. The outcomes of the reactions in terms of relative photocrosslinking yields were evaluated by denaturing polyacrylamide electrophoresis. We found that for photocrosslinking to occur at a high yield, a synergetic combination of three parameters was necessary: adjacent dimer configuration, strong attractive dye–dye interactions that led to excitonic coupling, and an A-T neighboring base pair. The insight into the proximity of dye-labeled thymines in adjacent and transverse configurations correlated with the strength of excitonic coupling in the corresponding dimers. To demonstrate a utility of photocrosslinking, we created a squaraine tetramer templated by a doubly crosslinked HJ with increased thermal stability. These findings provide guidance for the design of HJ-templated dye aggregates exhibiting strong excitonic coupling for exciton-based applications such as organic optoelectronics and quantum computing.     

Studies on the Interaction of Surfactants with Cationic Dye by Absorption Spectroscopy

The interaction of methyl violet, a cationic dye, with various surfactants, viz. anionic (SDS), nonionic (Triton X-100), and cationic (CTAB), has been investigated spectrophotometrically in submicellar and micellar concentration range. While in the submicellar concentration region of SDS the higher aggregates of the dye are found, in the micellar concentration region the monomer of the dye predominates. With nonionic surfactant the dye is solubilized primarily as the monomer. CTAB produces no perturbation to the visible spectra of the dye. In the presence of strong electrolytes such as NaNO(3) and NaCl the dye aggregates are formed at a much lower SDS concentrations. Copyright 2000 Academic Press.     

Integrated electroosmotically-driven on-line sample purification system for nanoliter DNA sequencing by capillary electrophoresis

An integrated on-line system is developed for DNA sequencing at the nanoliter scale. The technique involves the use of a nanoreactor for small-volume cycle-sequencing reaction, capillary zone electrophoresis (CZE) for purification of the sequencing fragments, and capillary gel electrophoresis (CGE) for separation of the purified DNA fragments. The nanoreactor and CZE are integrated into one capillary, where a 100-nl dye-labeled terminator cycle-sequencing reaction is carried out followed by CZE to separate excess dye-labeled terminators from the sequencing fragments. On-line electrokinetic injection of the purified DNA fragments into the CGE system is accomplished at a small-volume tee connector by which the CZE capillary is interfaced to the CGE system. The utility of the system is demonstrated in sequencing nanoliter volumes of single-stranded DNA (M13mp18) and double-stranded DNA (pGEM). The use of voltage to drive both CZE and CGE makes it feasible for automation and future adaptation of the whole system to a microchip.     

A competitive displacement assay with quantum dots as fluorescence resonance energy transfer donors

The unique optoelectronic properties of semiconductor quantum dots (QDs) make them well-suited as fluorescent bioprobes for use in various biological applications. Modification of CdSe/ZnS QDs with biologically relevant molecules provides for multipotent probes that can be used for cellular labeling, bioassays, and localized optical interrogation by means of fluorescence resonance energy transfer (FRET). Herein, we demonstrate the use of red-emitting streptavidin-coated QDs (QD₆₀₅) as donors in FRET to introduce a competitive displacement-based assay for the detection of oligonucleotides. Various QD–DNA bioconjugates featuring 25-mer probe sequences diagnostic of Hsp23 were prepared. The single-stranded oligonucleotide probes were hybridized to dye-labeled (Alexa Fluor 647) reporter sequences, which were provided for a FRET-sensitized emission signal due to proximity of the QD and dye. The dye-labeled sequence was designed to be partially complementary and include base-pair mismatches to facilitate displacement by a more energetically favorable, fully complementary recognition motif embedded within a 98-mer displacer sequence. Overall, this study demonstrates proof-of-concept at the nM level for competitive displacement hybridization assays in vitro by reduction of fluorescence intensity that directly correlates to the presence of oligonucleotides of interest. This work demonstrates an analytical method that could potentially be implemented for monitoring of intracellular gene expression in the future.     

Fluorescence resonance energy transfer between quantum dot donors and dye-labeled protein acceptors

We used luminescent CdSe-ZnS core-shell quantum dots (QDs) as energy donors in fluorescent resonance energy transfer (FRET) assays. Engineered maltose binding protein (MBP) appended with an oligohistidine tail and labeled with an acceptor dye (Cy3) was immobilized on the nanocrystals via a noncovalent self-assembly scheme. This configuration allowed accurate control of the donor-acceptor separation distance to a range smaller than 100 A and provided a good model system to explore FRET phenomena in QD-protein-dye conjugates. This QD-MBP conjugate presents two advantages: (1) it permits one to tune the degree of spectral overlap between donor and acceptor and (2) provides a unique configuration where a single donor can interact with several acceptors simultaneously. The FRET signal was measured for these complexes as a function of both degree of spectral overlap and fraction of dye-labeled proteins in the QD conjugate. Data showed that substantial acceptor signals were measured upon conjugate formation, indicating efficient nonradiative exciton transfer between QD donors and dye-labeled protein acceptors. FRET efficiency can be controlled either by tuning the QD photoemission or by adjusting the number of dye-labeled proteins immobilized on the QD center. Results showed a clear dependence of the efficiency on the spectral overlap between the QD donor and dye acceptor. Apparent donor-acceptor distances were determined from efficiency measurements and corresponding F?rster distances, and these results agreed with QD bioconjugate dimensions extracted from structural data and core size variations among QD populations.     

Fluorescent amplifying recognition for DNA G-quadruplex folding with a cationic conjugated polymer: a platform for homogeneous potassium detection

Single-stranded DNA with G-rich sequences can fold into secondary structures, G-quadruplexes, via intramolecular hydrogen-bonding interactions. This conformational change can be detected by a homogeneous assay method based on fluorescence resonance energy transfer (FRET) from a water-soluble cationic conjugated polymer (CCP) to a fluorescein chromophore labeled at the terminus of the G-quadruplex DNA. The space charge density around the DNA controls the efficiency of FRET from the CCP to the fluorescein. The higher FRET efficiency for the CCP/G-quadruplex pair is correlated to the stronger electrostatic interactions between the more condensed G-quadruplex and the CCP in comparison to the CCP/ssDNA pair. Since the potassium ion can specifically bind to the G-quadruplex DNA, the G-quartet-DNA/CCPs assembly can also be used as a platform to sense the potassium ion in water with high selectivity and sensitivity.