Selective Methanol-to-Formate Electrocatalytic Conversion on Branched Nickel Carbide

A methanol economy will be favored by the availability of low-cost catalysts able to selectively oxidize methanol to formate. This selective oxidation would allow extraction of the largest part of the fuel energy while concurrently producing a chemical with even higher commercial value than the fuel itself. Herein, we present a highly active methanol electrooxidation catalyst based on abundant elements and with an optimized structure to simultaneously maximize interaction with the electrolyte and mobility of charge carriers. In situ infrared spectroscopy combined with nuclear magnetic resonance spectroscopy showed that branched nickel carbide particles are the first catalyst determined to have nearly 100 % electrochemical conversion of methanol to formate without generating detectable CO₂ as a byproduct. Electrochemical kinetics analysis revealed the optimized reaction conditions and the electrode delivered excellent activities. This work provides a straightforward and cost-efficient way for the conversion of organic small molecules and the first direct evidence of a selective formate reaction pathway.     

Electrocatalytic activity of Pd nanoparticles supported on poly(3,4-ethylenedioxythiophene)-graphene hybrid for ethanol electrooxidation

The support materials play a critical role for the electrocatalytic oxidation of ethanol on precious metal catalysts in fuel cells. Here, we report the poly(3,4-ethylenedioxythiophene) combined with reduced graphene oxide (PEDOT-RGO) as the support of Pd nanoparticles (NPs) for ethanol electrooxidation in alkaline medium. The as-prepared Pd/PEDOT-RGO composite catalysts are characterized by Raman spectrometer, X-ray diffraction, transmission electron microcopy, and scanning electron microcopy. PEDOT-RGO composite with the porous structure facilitates the dispersion of Pd NPs with a smaller size leading to the increase of electrochemical active surface area. The electrochemical properties and electrocatalytic activities of Pd/PEDOT-RGO hybrid are evaluated by cyclic voltammetry, chronoamperometry, CO stripping voltammetry, electrochemical impedance spectroscopy (EIS) and Tafel analysis. The results suggest that Pd/PEDOT-RGO hybrid shows a higher electrocatalytic activity, a better long-term stability, and the poisoning tolerance for the ethanol electrooxidation than Pd on carbon black. EIS and Tafel analysis indicate that PEDOT-RGO improves the kinetics of ethanol electrooxidation on the Pd NPs and is an efficient support in fuel cells.     

炭载Pd-Ni合金纳米粒子对甲酸的电催化氧化

通过液相还原法制备了具有不同原子比例的Pd-Ni/C催化剂,并且使用X射线衍射（XRD）、透射电子显微镜(TEM)和X射线光电子能谱(XPS) 等表征手段对制备的催化剂进行了表征,总结了Ni的掺杂对Pd-Ni合金纳米粒子的尺寸及晶体结构的影响。电化学测试结果表明：适量的Ni的掺杂不但能够增强催化剂对甲酸催化氧化的活性,而且还能够提高催化剂的稳定性。因此,Pd-Ni/C催化剂是一类具有潜在应用前景的直接甲酸燃料电池阳极催化剂     

Controllable Modulation of Defects for Layered Double Hydroxide Nanosheets by Altering Intercalation Anions for Efficient Electrooxidation Catalysis

Hydrazine (N₂H₄) is considered as one of the most potential energy storage materials in liquid fuel cells, as it contains high energy and power density, and the high-efficiency oxidation of N₂H₄ in fuel cells has drawn great attention. However, the most used catalysts are expensive noble metal catalysts, thus the development of highly efficient non-noble metal catalysts is crucial to reduce the cost of hydrazine oxidation in practical industry. Herein, we synthesized a series of CoFe-layered double hydroxides (CoFe-LDHs) intercalated with different anions via a simple one-step co-precipitation method for the electrooxidation of hydrazine. Through altering the intercalated anions of CoFe-LDHs, the defects and the electronic structure can be well controlled, and the catalytic performance for the electrooxidation of hydrazine were well promoted by using NO₃⁻ intercalated into CoFe-LDH compared with other anions (like Cl⁻, BO₃³⁻, CO₃²⁻). This work developed a series of hydrazine electrooxidation catalysts and established the relationship between the intercalated anions, the fine structure of the catalyst and the electrocatalytic performance.     

A Membrane‐Free Neutral pH Formate Fuel Cell Enabled by a Selective Nickel Sulfide Oxygen Reduction Catalyst

Polymer electrolyte membranes employed in contemporary fuel cells severely limit device design and restrict catalyst choice, but are essential for preventing short‐circuiting reactions at unselective anode and cathode catalysts. Herein, we report that nickel sulfide Ni₃S₂ is a highly selective catalyst for the oxygen reduction reaction in the presence of 1.0 m formate. We combine this selective cathode with a carbon‐supported palladium (Pd/C) anode to establish a membrane‐free, room‐temperature formate fuel cell that operates under benign neutral pH conditions. Proof‐of‐concept cells display open circuit voltages of approximately 0.7 V and peak power values greater than 1 mW cm⁻², significantly outperforming the identical device employing an unselective platinum (Pt) cathode. The work establishes the power of selective catalysis to enable versatile membrane‐free fuel cells.     

Physical and electrochemical characterizations of nanostructured Pd/C and PdNi/C catalysts for methanol oxidation

Pd and PdNi nanoparticles supported on Vulcan XC-72 carbon were prepared by a chemical reduction with formic acid process. The catalysts were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), cyclic voltammetry, and chronoamperometry. The results showed that the Pd and PdNi nanoparticles, which were uniformly dispersed on carbon, were 2–10 nm in diameters. The PdNi/C catalyst has higher electrocatalytic activity for methanol oxidation in alkaline media than a comparative Pd/C catalyst and shows great potential as less expensive electrocatalyst for methanol electrooxidation in alkaline media in direct methanol fuel cells.     

Porous carbon as electrode material in direct ethanol fuel cells (DEFCs) synthesized by the direct carbonization of MOF-5

Porous carbon (PC-900) was prepared by direct carbonization of porous metal-organic framework (MOF)-5 (Zn₄O(bdc)₃, bdc?=?1,4-benzenedicarboxylate) at 900 °C. The carbon material was deposited with PtM (M?=?Fe, Ni, Co, and Cu (20 %) metal loading) nanoparticles using the polyol reduction method, and catalysts PtM/PC-900 were designed for direct ethanol fuel cells (DEFCs). However, herein, we are reporting PtFe/PC-900 catalyst combination which has exhibited superior performance among other options. This catalyst was characterized by powder XRD, high-resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and selected area electron diffraction (SAED) technique. The electrocatalytic capability of the catalyst for ethanol electrooxidation was investigated using cyclic voltammetry and direct ethanol single cell testing. The results were compared with those of PtFe and Pt supported on Vulcan XC72 carbon catalysts (PFe/CX-72 and Pt/XC-72) prepared via the same method. It has been observed that the catalyst PtFe/PC-900 developed in this work showed an outstanding normalized activity per gram of Pt (6.8 mA/g Pt) and superior power density (121 mW/cm² at 90 °C) compared to commercially available carbon-supported catalysts.     

Recent development of methanol electrooxidation catalysts for direct methanol fuel cell

Direct methanol fuel cells(DMFCs) are very promising power source for stationary and portable miniature electric appliances due to its high efficiency and low emissions of pollutants. As the key material, catalysts for both cathode and anode face several problems which hinder the commercialization of DMFCs.In this review, we mainly focus on anode catalysts of DMFCs. The process and mechanism of methanol electrooxidation on Pt and Pt-based catalysts in acidic medium have been introduced. The influences of size effect and morphology on electrocatalytic activity are discussed though whether there is a size effect in MOR catalyst is under debate. Besides, the non Pt catalysts are also listed to emphasize though Pt is still deemed as the indispensable element in anode catalyst of DMFCs in acidic medium. Different catalyst systems are compared to illustrate the level of research at present. Some debates need to be verified with experimental evidences.     

Synthesis and characterization of Pd catalysts supported on carbon microspheres for formic acid oxidation

A facile preparation of Pd catalyst using carbon microspheres as support was introduced in this paper. The carbon microspheres were prepared with a simple method from dextrose via hydrothermal process and used as catalysts support for formic acid electrooxidation. Transmission electron microscopy (TEM) and X-ray diffraction (XRD) analyses revealed that the as-prepared face-centered cubic crystal Pd nanoparticles were well-dispersed on the surface of the carbon microspheres, and the mean diameter of the nanoparticles was 8.8 nm. The effect of the support on the catalyst performance for formic acid electrooxidation was studied. The as-prepared catalyst showed the enhanced electrochemical surface active area and the higher electrocatalytic activity towards formic acid oxidation compared with Pd/CNTs and Pd/XC-72 catalysts prepared at room temperature. Electrochemical analysis suggested that the carbon microspheres might be good candidates to be used as the supports of catalyst for formic acid electrochemical oxidation.     

An Update on Formic Acid Dehydrogenation by Homogeneous Catalysis

Formic acid (FA) has been extensively studied as one of the most promising hydrogen energy carriers today. The catalytic decarboxylation of FA ideally leads to the formation of CO₂ and H₂ that can be applied in fuel cells. A large number of transition‐metal based homogeneous catalysts with high activity and selectivity have been reported for the selective FA dehydrogentaion. In this review, we discussed the recent development of C,N/N,N‐ligand and pincer ligand‐based homogeneous catalysts for the FA dehydrogenation reaction. Some representative catalysts are further evaluated by the CON/COF assessment (catalyst on‐cost number)/(catalyst on‐cost frequency). Conclusive remarks are provided with future challenges and opportunities.     

Nanostructured PdRu/C catalysts for formic acid oxidation

Pd and bimetallic PdRu nanoparticles supported on Vulcan XC-72 carbon prepared by the microwave-assisted polyol process are examined as electrocatalysts for the electrooxidation of formic acid. The catalysts are characterized by transmission electron microscopy and X-ray diffraction. The Pd and PdRu nanoparticles with sizes of <10 nm display the characteristic diffraction peaks of a Pd face-centered cubic (fcc) crystal structure. It is found that the addition of Ru to Pd/C can decrease the lattice parameter of Pd (fcc) crystal. The electrocatalytic activities of the catalysts are evaluated in sulfuric acid solution containing 1 M formic acid using linear sweeping voltammetry and chronoamperometry. The results show that Pd₅Ru₁/C displays the best electrocatalytic performance among all catalysts for formic acid electrooxidation.     

A Membrane-Free Neutral pH Formate Fuel Cell Enabled by a Selective Nickel Sulfide Oxygen Reduction Catalyst

Polymer electrolyte membranes employed in contemporary fuel cells severely limit device design and restrict catalyst choice, but are essential for preventing short-circuiting reactions at unselective anode and cathode catalysts. Herein, we report that nickel sulfide Ni₃S₂ is a highly selective catalyst for the oxygen reduction reaction in the presence of 1.0 m formate. We combine this selective cathode with a carbon-supported palladium (Pd/C) anode to establish a membrane-free, room-temperature formate fuel cell that operates under benign neutral pH conditions. Proof-of-concept cells display open circuit voltages of approximately 0.7 V and peak power values greater than 1 mW cm⁻², significantly outperforming the identical device employing an unselective platinum (Pt) cathode. The work establishes the power of selective catalysis to enable versatile membrane-free fuel cells.     

碳载PdPb催化剂的制备及对甲酸氧化的电催化性能

采用液相还原共沉积法制备出高活性纳米电催化剂PdPb/C, 研究发现, 碳载Pd催化剂中加入Pb能够提高催化剂对甲酸的电氧化活性, 并改变甲酸氧化的反应机理. 少量Pb的加入能够提高催化剂中活性粒子的分散度, 且大幅度提高催化剂对甲酸氧化的电催化活性. 当催化剂中Pd与Pb的质量比为8: 1时, 对甲酸的电氧化活性最高, 峰电流密度约为Pd/C催化剂上的180%; 而当Pd与Pb的质量比为2: 1时, 催化剂对甲酸氧化的稳定性最好.     

An Integrated CO2 Electrolyzer and Formate Fuel Cell Enabled by a Reversibly Restructuring Pb–Pd Bimetallic Catalyst

A single device combining the functions of a CO₂ electrolyzer and a formate fuel cell is a new option for carbon‐neutral energy storage but entails rapid, reversible and stable interconversion between CO₂ and formate over a single catalyst electrode. We report a new catalyst with such functionalities based on a Pb–Pd alloy system that reversibly restructures its phase, composition, and morphology and thus alters its catalytic properties under controlled electrochemical conditions. Under cathodic conditions, the catalyst is relatively Pb‐rich and is active for CO₂‐to‐formate conversion over a wide potential range; under anodic conditions, it becomes relatively Pd‐rich and gains stable catalytic activity for formate‐to‐CO₂ conversion. The bifunctional activity and superior durability of our Pb–Pd catalyst leads to the first proof‐of‐concept demonstration of an electrochemical cell that can switch between the CO₂ electrolyzer/formate fuel cell modes and can stably operate for 12 days.     

Dynamics of Electrocatalytic Oxidation of Ethylene Glycol,Methanol and Formic Acid at MWCNT Platform Electrochemically Modified with Pt/Ru Nanoparticles

Comparative electrocatalytic behavior of functionalized multiwalled carbon nanotubes (fMWCNTs) electrodecorated with Pt/Ru nanoparticles towards the oxidation of methanol (MeOH), ethylene glycol (EG) and formic acid (FA) has been investigated. The catalytic current density decreased approximately as MeOH≈EG>FA. Result revealed that BPPGE‐fMWCNT‐Pt/Ru tolerates CO poisoning for FA electrooxidation than when used for the oxidation of the EG or MeOH. Electrochemical impedance spectra are dependent on the oxidation potentials, with equivalent circuit models characteristic of adsorption‐controlled charge transfer kinetics. The results provide important insights into the electrochemical response of these small organic molecules useful in fuel cell technology.     

Technical electrodes catalyzed with PtRu on mesoporous ordered carbons for liquid direct methanol fuel cells

This paper presents the behavior of ordered mesoporous carbon (OMC)-supported catalysts as anodes for direct methanol fuel cells (DMFC), fed with an aqueous methanol solution. OMC samples were prepared by the nanocasting method from a polymerized furan resin using mesoporous silica as a template. Pt and PtRu nanoparticles were supported on OMC with high dispersion, the particle size being 2.4 nm at PtRu loading of 15 wt.%. The resulting catalysts were analyzed using carbon monoxide stripping voltammetry, cyclic voltammetry, and chronoamperometry in three-electrode experiments and recording cell voltage vs. current density curves in practical DMFC. It was found that PtRu-catalyzed technical electrodes exhibited good activity towards methanol electrooxidation in half-cell experiments under fuel-cell-relevant conditions. Specifically, Pt₈₅Ru₁₅/OMC catalyst showed the highest catalytic enhancement compared to Pt/OMC for the steady-state electrooxidation of methanol at 60 °C and 0.5 V, by a factor of 22 in 2-M MeOH solution. DMFC single cells yielded an open-circuit voltage of 0.625 V at 60 °C. Polarization curves indicate that DMFC with OMC-supported Pt₈₅Ru₁₅ catalyst at the anode exhibited the best performance.     

Nanostructured catalysts for direct electrooxidation of dimethyl ether based on Bi- and trimetallic Pt–Ru and Pt–Ru–Pd alloys prepared from coordination compounds

Bi- and trimetallic platinum–ruthenium and platinum–ruthenium–palladium catalysts with specified atomic ratios Pt: Ru = 1: 1 and Pt: Ru: Pd = 1: 1: 0.1, respectively, were synthesized from the coordination compounds of the metals deposited on highly dispersed carbon black. The catalysts were characterized by powder X-ray diffraction, electron dispersive analysis, and transmission electron microscopy. According to voltammetry data, the highest activity in the dimethyl ether (DME) electrooxidation is exhibited by the catalyst Pt_0.43Ru_0.47Pd_0.1/C; hence, it may be considered as a promising anode material for direct DME fuel cells.     

碳黑预处理对Pt/C催化剂对甲醇氧化电催化活性的影响

直接甲醇燃料电池(DMFC)由于具有较多的优点而受到广泛的关注. 但是碳载Pt (Pt/C)阳极催化剂电催化活性低是限制其应用的一个主要问题. 为了提高Pt/C催化剂对甲醇氧化的电催化性能, 分别用CO₂, 空气, H₂O₂或HNO₃对常用作为载体的Vulcan XC-72碳黑进行预处理. 结果表明, 在用CO₂, 空气, HNO₃, H₂O₂处理的及未处理的碳黑作载体制得的Pt/C催化剂电极上, 甲醇氧化峰的峰电流密度顺序为39, 33, 32, 20和18 mA•cm^－2, 表明用CO₂处理的碳载体制备的Pt/C催化剂对甲醇氧化有最好的电催化活性和稳定性. 其主要原因是用CO₂处理能减少碳黑表面的含氧基团和增加石墨化程度, 而使碳黑的电阻降低及Pt粒子在碳黑上的分散性变好.     

Carbon-supported PdSn nanoparticles as catalysts for formic acid oxidation

Pd and PdSn nanoparticles supported on Vulcan XC-72 carbon are prepared by a microwave-assisted polyol process. The catalysts are characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), linear sweeping voltammetry, and chronoamperometry. The results show that the Pd and PdSn nanoparticles, which are uniformly dispersed on carbon, are 2–10 nm in diameters. All Pd/C and PdSn/C catalysts display the characteristic diffraction peaks of a Pd face-centered cubic (fcc) crystal structure. It is found that the addition of Sn to Pd can increase the lattice parameter of Pd (fcc) crystal. The PdSn/C catalysts have higher electrocatalytic activity for formic acid oxidation than a comparative Pd/C catalyst and show great potential as less expensive electrocatalyst for formic acid electrooxidation in DFAFCs.     

乙二胺接枝改性碳纳米管负载的乙醇氧化电催化剂Pt及Pt-Ru的制备及电催化性质

采用化学法制备了乙二胺接枝改性碳纳米管（ED/MWNTs）负载的Pt及Pt-Ru催化剂,并用红外光谱法、透射电镜分析（TEM）及X射线能谱技术对催化剂进行了表征。结果表明：乙二胺对碳纳米管的改性使Pt及Pt-Ru在碳管上的分布更均匀,粒径更小。同时,催化剂对乙醇电催化氧化活性的电化学研究结果表明：乙二胺改性可明显提高Pt-Ru/MWNTs/C 和Pt/MWNTs/C的电催化活性,而且Pt/ED/MWNTs/C的活性甚至比Pt-Ru/MWNTs/C的活性还高。由此,ED/MWNTs作为乙醇电氧化催化剂的载体有着很好的应用前景。