超临界二氧化碳中布洛芬响应因子的研究

应用高压紫外检测器在线测定了布洛芬在超临界二氧化碳中的响应因子。 考察了温度、压力和CO2密度等参数对它的影响。在温度298-333K、压力9-17MPa范围内超临界CO2中布洛芬的响应因子随CO2密度的增加而线性递减。建立了布洛芬在超临界CO2中响应因子的经验计算式(回归系数r=0．97)，其理论计算结果与实验数据吻合良好，最大误差≤10％。     

Production of Mesoglycan/PCL Based Composites through Supercritical Impregnation

The development of targeted therapies for wound repair is knowing a growing interest due to the increasing aging of the population and the incidence of chronic pathologies, mainly pressure ulcers. Among molecules recruiting cell populations and promoting the formation of new vital tissue, sodium mesoglycan (MSG) has been proven to be effective in wound healing. In this work, MSG impregnation of polymer matrices has been attempted by a supercritical carbon dioxide-based process. Polymeric matrices are composed of polycaprolactone blends, where water-soluble polymers, polyethylene glycol, polyvinyl pyrrolidone, gelatin, and thermoplastic starch, have been employed to modulate the MSG release, making the devices potentially suitable for topical administrations. Two different techniques have been used to obtain the films: the first one is compression molding, producing compact and continuous structures, and the second one is electrospinning, producing membrane-like designs. A higher amount of MSG can be loaded into the polymeric matrix in the membrane-like structures since, in these films, the impregnation process is faster than in the case of compression molded films, where the carbon dioxide has firstly diffused and then released the active molecule. The type of water-soluble polymer influences the drug release rate: the blend polycaprolactone-gelatin gives a prolonged release potentially suitable for topical administration.     

亲二氧化碳碳氢聚合物及其应用*

超临界二氧化碳（scCO₂）作为一种新型“绿色溶剂”,具有无毒、不可燃、易于分离以及来源丰富等特点,有望替代传统的挥发性有机溶剂。但scCO₂是很弱的溶剂,大部分极性分子和高分子量聚合物在其中的溶解度都很低,限制了其工业应用。目前,应用scCO₂遇到的一个挑战就是寻找有效的适用于scCO₂的表面活性剂、配合物、相转移剂等。本文综述了亲二氧化碳聚合物的研究进展,从链段柔顺性和自由体积、溶质/溶质相互作用、溶质/CO₂相互作用三个方面介绍了亲二氧化碳碳氢化合物的设计原则,并介绍了亲二氧化碳聚合物在制备表面活性剂、增溶染料和催化剂等方面的相关应用。     

超临界(压缩)二氧化碳介质中的选择氧化

由于超临界二氧化碳（SCCO₂）具有稳定、安全、不燃、清洁无毒、粘度小、扩散快、可压缩的特殊性质,所以使得超临界二氧化碳非常适合作为催化反应的绿色溶剂.除此之外,多种气体在超临界二氧化碳中的溶解度很高,这对于那些受传质阻碍和易引起安全隐患的气相反应来讲,使用SCCO₂作为替代的反应溶剂具有重要的价值。值得指出的是：如果选择超临界二氧化碳作为氧化反应的溶剂,其自身不会发生反应而产生副产物,从而容易得到清洁的产物。本文主要讨论了超临界二氧化碳作为反应介质对醇、烯烃和烷烃等选择氧化反应的影响,通过与传统溶剂比较可以看出超临界二氧化碳作为氧化反应溶剂的优势,对近几年来以分子氧为氧化剂,以超临界二氧化碳为介质的催化选择氧化的反应体系作了综述,并对未来的发展提出了展望。     

超临界CO2对尼龙66膜的改性

对于大多数聚合物而言,超临界CO2(SC CO2)是不良溶剂,但是它可以溶解许多小分子,对聚合物有很强的溶胀性。此外,在临界点附近,压力的微小改变能导致超临界流体的密度和溶剂化能力的巨大改变,因此,可以很方便地控制其对聚合物的溶胀度;其次在降压过程中无气．液共存,避免了毛细管力对基质的破坏,并且溶剂很容易与基质分离。     

Supercritical CO2 Extract from Microalga Tetradesmus obliquus: The Effect of High-Pressure Pre-Treatment

High-pressure pre-treatment followed by supercritical carbon dioxide (ScCO₂) extraction (300 bar, 40 °C) was applied for the attainment of the lipophilic fraction of microalga Tetradesmus obliquus. The chemical profile of supercritical extracts of T. obliquus was analyzed by ultra-high-performance liquid chromatography–high-resolution mass spectrometry with electrospray ionization (UHPLC-ESI-HRMS). Moreover, the impact of ScCO₂ on the microbiological and metal profile of the biomass was monitored. The application of the pre-treatment increased the extraction yield approximately three-fold compared to the control. In the obtained extracts (control and pre-treated extracts), the identified components belonged to triacylglyceroles, fatty acid derivatives, diacylglycerophosphocholines and diacylglycerophosphoserines, pigments, terpenes, and steroids. Triacylglycerols (65%) were the most dominant group of compounds in the control extract. The pre-treatment decreased the percentage of triacylglycerols to 2%, while the abundance of fatty acid derivatives was significantly increased (82%). In addition, the pre-treatment led to an increase in the percentages of carotenoids, terpenoids, and steroids. Furthermore, it was determined that ScCO₂ extraction reduced the number of microorganisms in the biomass. Considering its microbiological and metal profiles, the biomass after ScCO₂ can potentially be used as a safe and important source of organic compounds.     

超临界co2中模板法制备氧化铝多孔材料

超临界co2;活性炭;模板;氧化铝;多孔     

超临界CO2辅助制备聚苯乙烯/尼龙1010共混物及其结晶形态

超临界CO2辅助制备聚苯乙烯/尼龙1010共混物及其结晶形态;超临界CO2;插嵌;共混;尼龙1010;苯乙烯;附生结晶     

超临界CO2中以活性碳为模板由TEOS制备多孔SiO2

在超临界CO2中以活性碳为模板由正硅酸乙酯(TEOS)前体涂层焙烧法制备多孔SiO2材料。结构分析表明,超临界涂层法制备的多孔SiO2材料的比表面积、比孔容和平均孔径分别达到1147m2/g、1.4cm3/g和2.20nm,优于常规液相浸渍涂层法。并研究了活性碳含水量、超临界涂层的温度和压力等因素对涂层效果的影响,确定了较好的涂层条件。     

Oxidation of Styrene with Molecular Oxygen in Supercritical CO2

The oxidation of styrene with molecular oxygen catalyzed by PdCl2 CuCl2 has been investigated in supercritical CO2 with a batch reactor. The oxidative system of styrene contains four components at the beginning and seven components during the reaction. The critical temperature, critical pressure, and critical density at different conversions are determined by using a high-pressure view cell. The effect of phase behavior on the conversion and selectivity were studied. Experimental results showed that the critical parameters of the reaction mixture at fixed initial molar ratio changed with the conversion of reactant. The conversion of styrene reached maximum near the critical density of the reaction mixture. Product selectivity also varied with density of reaction mixture and could be tuned to some degree.     

超临界条件下CO2和丙烯直接合成甲基丙烯酸Ni2(OCH3)2/SiO2催化剂

超临界反应;负载型催化剂;双核桥联配合物;配合物;超临界条件下CO2和丙烯直接合成甲基丙烯酸Ni2(OCH3)2/SiO2催化剂     

Optical Diagnostics of Supercritical CO2 and CO2-Ethanol Mixture in the Widom Delta

The supercritical CO₂ (scCO₂) is widely used as solvent and transport media in different technologies. The technological aspects of scCO₂ fluid applications strongly depend on spatial–temporal fluctuations of its thermodynamic parameters. The region of these parameters’ maximal fluctuations on the p-T (pressure-temperature) diagram is called Widom delta. It has significant practical and fundamental interest. We offer an approach that combines optical measurements and molecular dynamics simulation in a wide range of pressures and temperatures. We studied the microstructure of supercritical CO₂ fluid and its binary mixture with ethanol in a wide range of temperatures and pressures using molecular dynamics (MD) simulation. MD is used to retrieve a set of optical characteristics such as Raman spectra, refractive indexes and molecular refraction and was verified by appropriate experimental measurements. We demonstrated that in the Widom delta the monotonic dependence of the optical properties on the CO₂ density is violated. It is caused by the rapid increase of density fluctuations and medium-sized (20–30 molecules) cluster formation. We identified the correlation between cluster parameters and optical properties of the media; in particular, it is established that the clusters in the Widom delta acts as a seed for clustering in molecular jets. MD demonstrates that the cluster formation is stronger in the supercritical CO₂-ethanol mixture, where the extended binary clusters are formed; that is, the nonlinear refractive index significantly increased. The influence of the supercritical state in the cell on the formation of supersonic cluster jets is studied using the Mie scattering technique.     

Study on Properties of TBP-HNO3 Complex Used for Direct Dissolution of Lanthanide and Actinide Oxides in Supercritical Fluid CO2

The tri-n-butyl phosphate-nitric acid （TBP-HNO3） complex prepared by contacting the pure TBP with the concentrated HNO3 can be used for direct dissolution of lanthanide and actinide oxides in the supercritical fluid carbon dioxide （SCF-CO2）. Properties of the TBP-HNO3 complex have been studied. Experimental results showed that when the initial HNO3/TBP volume ratio was varied from 1 ： 7 to 5 ： 1, the concentration of HNO3 in the TBP-HNO3 complex changed from 1.95 to 5.89 mol/L, the [HNO3]/[TBP] ratio of the TBP-HNO3 complex changed from 0.61 to 2.22, and the content of H20 in the TBP-HNO3 complex changed from 2.02% to 4.19%. All of the density, viscosity and surface tension of the TBP-HNO3 complex changed with the concentration of HNO3 in the complex, and were higher than those of the pure TBE The protons of HNO3 and H2O in the complex underwent rapid exchange to exhibit a singlet resonance peak in nuclear magnetic resonance spectra. When the TBP-HNO3 complex was dissolved in a low dielectric constant solvent, small droplets of HNO3 were formed that can be detected by NMR.     

聚吡咯薄膜在超临界CO_2与离子液体两相体系中的电化学合成

首次在超临界CO2与离子液体两相体系中实现了聚吡咯（PPyr）薄膜的电化学合成.与纯离子液体相比,该体系中合成的PPyr膜具有均匀平滑的表面.随着CO2压力的增加,膜的生长速度减慢,膜的表面变得更加均匀平滑.     

Dehydrogenation of propane in the presence of CO2 on Cr(3%)/SiO2 catalyst under supercritical conditions

1. Download : Download high-res image (78KB)
2. Download : Download full-size image

     

Superior Nanoporous Polyimides via Supercritical CO2 Drying of Jungle‐Gym‐Type Polyimide Gels

We report novel nanoporous polyimides formed from jungle‐gym‐type rigid polyimide gels by supercritical CO₂ drying. By virtue of supercritical CO₂ drying to avoid the collapse of nanostructure, porosity above 90 vol.‐% was achieved. We found a rich variety of nanoporous structures in the range of 50–800 nm such as crisp fragments, minute network, and highly‐connected beads. These characteristic structures were formed by the competitive progress of liquid‐liquid phase separation and crystallization induced due to the two chemical reactions of end‐crosslinking and thermal imidization during gelation.

     

Solubility of vinylidene fluoride polymers in supercritical CO2 and halogenated solvents

The cloud‐point behaviors of poly(vinylidene fluoride) (PVDF) and poly(vinylidene fluoride‐co‐22 mol % hexafluoropropylene) (VDF–HFP₂₂) are reported at temperatures up to 250 °C and pressures up to 3000 bar in supercritical CO₂, CHF₃, CH₂F₂, CHClF₂, CClF₃, CH₃CHF₂, CH₂FCF₃, CHF₂CF₃, and CH₃CClF₂. The molecular weight of PVDF has a smaller effect on the cloud point than the solvent quality. Cloud‐point pressures for both fluoropolymers decrease as the solvent polarizability, polar moment per molar volume, and density increases. However, it is extremely difficult to dissolve either fluoropolymer in CClF₃, which has a large polarizability and a small dipole moment. CO₂ is an effective solvent because it complexes with the C F dipole at low temperatures where energetic interactions fix the phase behavior. In addition, polymer architecture has a strong impact on the cloud‐point pressure. VDF–HFP₂₂ has lower cloud‐point pressures than PVDF in all solvents because it has a larger free volume that promotes facile interactions between the solvent and the polymer segments. Cloud‐point data are also reported for amorphous poly(tetrafluoroethylene‐co‐x mol % 2,2‐bistrifluoromethyl‐4,5‐difluoro‐1,3‐dioxole) (TFE–PDD_x ; x = 65 and 85) in CO₂. These data provide an interesting comparison to the PVDF–CO₂ and VDF–HFP₂₂–CO₂ systems because TFE–PDD₆₅ and TFE–PDD₈₇ have very high glass‐transition temperatures of 160 and 240 °C, respectively. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2832–2840, 2000