单轴取向聚对苯二甲酸乙二酯非等温结晶动力学研究

采用等速升温DSC方法对单轴取向聚对苯二甲酸乙二酯 (PET)的结晶过程进行了研究 ,发现单轴取向PET的冷结晶峰表现为多重结晶峰 .等温DSC方法的研究结果进一步证实结晶重峰的存在 .为此 ,本文提出了一种依据非等温DSC曲线解析高聚物结晶动力学参数的新方法 .对单轴取向PET的研究结果表明 ,与其他方法相比较 ,由新方法计算出的理论曲线与实验数据能更好地吻合 .单轴取向PET的总的结晶过程由三个子结晶过程组成 .根据不同拉伸比 ,各个子过程的Avrami指数和质量分数的变化 ,对结晶机理进行了解释 .与各向同性PET样品相比 ,单轴取向PET在低温部分的结晶速率明显增快     

高聚物的非等温结晶动力学——从不同速率的升温或降温DSC曲线解析结晶动力学参数

根据等温DSC法,测定结晶动力学参数在实验上存在着一定的局限性,结晶太快或太慢都难于获得可靠的结果,这就限定了能测定的温度区间。可见,等温DSC法测定结晶动力学参数具有获得的信息量少,结晶起始点难以确定,费时等缺点。这些缺点可通过等速变温DSC法来克服。然而,通过等速变温DSC法测定结晶动力学参数的方法至今还不完善。例如Ozawa曾基于Evans理论把Avrami方程推广于非等温结晶,从Ozawa方程通过等速变温DSC曲线可得到表征结晶机理的函数Avrami ＄数。和冷却结晶函数。Ozawa方法的不足是从其冷却结晶函数不能解析出表征结晶速率的参数。     

基于差示扫描量热法的火工品材料选型研究

通过综合分析差示扫描量热法(DSC)图谱及动力学数据,进行火工品中药剂外包覆材料的选型研究。采用DSC测试炸药与不同涂敷层材料在不同升温速率的热性质,利用Ozawa法和DSC曲线对比法,对几种涂敷层材料进行分析。炸药与丙烯酸清漆混合后,DSC曲线表观性征、峰温以及反应的活化能变化最小;炸药与快速固化剂混合后,峰温及活化能变化影响居中,DSC曲线表观性征在升温速率大时有较大变化;炸药与硅橡胶混合后,DSC曲线表观性征、峰温以及反应的活化能变化最大。从而确定丙烯酸清漆为最合适的炸药包覆材料。     

DSC的计算机动态模拟实验以及对DSC曲线各特征点物理意义的解释

本文利用计算机对DSC实验进行动态模拟,对实验过程中样品的状态进行跟踪。由于在模拟实验中完全模仿实际的实验环境,故得到的模拟曲线与实际DSC过程曲线完全相同,对DSC曲线上各特征点的物理意义的解释也变得十分自然、直接。     

重(三硝基乙基)乙二硝胺的热分解 Ⅱ. 晶体性质与热分解动力学参量的关系

我们曾发现,重(三硝基乙基)乙二硝胺(BTNE)晶体热分解反应速度常数k的数值与该晶体重结晶条件有关系,而不同重结晶过程有可能给出性质各异的品体。在本文中,作者们利用差示扫描量热(DSC)、X-光多晶衍射、电子扫描显微镜(SEM)技术研究了工作[1]中提到的十种BTNE晶体,BTNE的单晶(BT-M)和未经任何重结品处理的实验室合成的BTNE粗品(BT-U)的晶体性质。利用DSC和X-光多晶衍射技术研究了BTNE晶体的晶型。同一晶体的不同晶型具有各自的X-光衍射图,而不同晶型间的转换可在DSC曲线上表现出存在有相应的吸热峰。工作[1]中给出的DSC曲线表明,     

用非等温DSC曲线研究异硫氰酸钇苄胺配合物的热分解非等温反应动力学

利用DSC曲线研究热分解反应动力学的报道还不多。本文利用一条非等温DSC曲线,将积分法和微分法相结合,对异硫氰酸钇与苄胺形成的配合物的热分解进行了非等温动力学     

几种PET切片和丝的DSC表征

在过去研究PET的热历史对其玻璃化、冷结晶、熔化和冷却结晶影响的基础上,本文结合生产实际通过从不同厂家PET切片的DSC曲线特征,推测各种切片所经历的热过程。从同一家厂PET切片纺制的不同纺速的PET丝的DSC曲线恃征,了解纺速对其热行为的影响。从不同厂家PET切片以相同纺速纺制的POY的DSC曲线特征,了解不同切片对其热行为的影响。借以为PET切片和丝的生产控制提供相应的依据。     

染料敏化太阳电池阻抗特性研究

电化学阻抗谱(EIS)是染料敏化太阳电池(DSC)领域中最重要的研究手段之一。本文详细介绍了EIS在DSC研究中的理论模型、实验方法、内部电荷传输和转移过程、阻抗信息提取和动力学过程解析的最新研究进展;综述了其在光阳极、电解液体系、对电极、稳定性、新结构设计等DSC各个研究领域中的应用,特别总结了DSC内部各个组成部分的阻抗特性。最后,对这些方面存在的问题进行了评论,并对未来新材料和电池机理的深入研究进行了展望。     

2′-甲基丙烯酰氧基-3α-甲基丙烯酰基胆酸乙酯固化动力学研究

根据文献合成了含有两个双键的胆酸衍生物—2′-甲基丙烯酰氧基-3α-甲基丙烯酰基胆酸乙酯(CAGE2MA),采用非等温DSC法和等温DSC法研究其固化反应。采用Kissinger法处理非等温DSC数据得到动力学数据:Ea=90.16kJ/mol、lnA=21.97和n=0.936。通过积分等转化率法及自催化动力学模型分别处理等温固化DSC数据,前者表明随着反应的进行,Ea和lnA值逐渐减小;后者表明固化温度越高,自催化曲线与实验数据拟合得越好,在高转化率阶段,实验数据与拟合曲线出现偏差。     

样条函数逼近法研究环氧树脂固化动力学

采用样条函数逼近DSC曲线,分别对4,5-环氧环已烷1,2-二甲酸二缩水甘油酯、四氢邻苯二甲酸二缩水甘油酯及双酚A二缩水甘油醚与间苯二胺的固化动力学作了研究.结果表明,样条函数逼近DSC曲线有较高的精度,由模拟函数处理实验数据取得较满意的结果.     

Polymer-surfactant and protein-surfactant interactions

The phase behavior and some physicochemical properties of homopolymers (HP) and hydrophobically modified (HMP) polymers, as well as of polyelectrolytes (PE) and proteins (PR), in the presence of aqueous surfactants, or their mixtures, are discussed. Mixing the above components gives rise to the formation of organized phases, whose properties are controlled by polymer and/or surfactant content, temperature, pH, and ionic strength. Depending on the nature, concentration, and net charge of both solutes, molecular solutions, polymer-surfactant complexes, adsorption onto micelles and vesicles, gels, liquid crystalline phases, and precipitates are observed. Such rich polymorphic behavior is the result of a complex balance between electrostatic, excluded volume, van der Waals, and other contributions to overall system stability. It is also modulated by the molecular details and architecture of both the polymer and the surfactant. Different experimental methods allow investigation of the above systems and getting information on the nature of polymer-surfactant interactions (PSI). Surface adsorption and thermodynamic methods, together with investigation of the phase diagrams, give information on the forces controlling PSI and on the existence of different phases. Conductivity, QELS and viscosity allow estimating the size and shape of polymer-surfactant (protein-surfactant) complexes. Optical microscopy, cryo-TEM, AFM, NMR, fluorescence, and relaxation methods give more information on the above systems. Use of the above mixtures in controlling gelation, surface covering, preparing dielectric layers, and drug release is suggested.     

丝素蛋白纤维及功能化材料的设计与构筑

随着环境污染、资源枯竭和医疗健康等问题的加剧,研发同时满足特定使用性能、安全性及可再生性的新型材料成为当前的发展趋势.而丝素蛋白材料正是以天然蚕丝为基本原材料,经一定的加工和功能化而形成的具有特殊结构、独特性能和广泛应用的生物质材料,近年来在生物医药、生物电子、智能传感等领域展现出巨大的应用潜力.本专论总结了丝素蛋白纤维及功能化材料的最新成果,结合本课题组相关工作,重点阐述了再生丝素蛋白纤维的仿生制备、生物医用支架的构筑与功能化、智能电子材料的设计以及天然多功能蚕丝及其构筑基元制备的研究进展,以期为高性能丝素蛋白材料的设计与构筑提供指导和借鉴.     

Overall connectivities/topological complexities: a new powerful tool for QSPR/QSAR

Earlier attempts to assess the complexity of molecules are analyzed and summarized in a number of definitions of general and topological complexity. A concept which specifies topological complexity as overall connectivity, and generalizes the idea of molecular connectivities of Randic, Kier, and Hall, is presented. Two overall connectivity indices, TC and TC1, are defined as the connectivity (the sum of the vertex degrees) of all connected subgraphs in the molecular graph. The contributions to TC and TC1, which originate from all subgraphs having the same number of edges e, form two sets of eth-order overall connectivities, eTC and eTC1. The total number of subgraphs K is also analyzed as a complexity measure, and the vector of its eth-order components, eK, is examined as well. The TC, TC1, and K indices match very well the increase in molecular complexity with the increase in the number of atoms and, at a constant number of atoms, with the increased degree of branching and cyclicity of the molecular skeleton, as well as with the multiplicity of bonds and the presence of heteroatoms. The potential of the three sets of eth-order complexities for applications to QSPR was tested by the modeling of 10 alkane properties (boiling point, critical temperature, critical pressure, critical volume, molar volume, molecular refraction, heat of formation, heat of vaporization, heat of atomization, and surface tension), in parallel with Kier and Hall's molecular connectivity indices (k)chi. The topological complexity indices were shown to outperform molecular connectivity indices in 44 out of the 50 pairs of models compared, including all models with four and five parameters.     

Effect of Cr(VI) anions on adsorption and desorption behavior of Cu(II) in the colloidal systems of two authentic variable charge soils

Heavy metals in wastes exist as multiple pollutants. The study of the interactions between multiple pollutants and soils should be of significance in practice. In the present study, the effect of chromate on adsorption and desorption behavior of Cu(II) in two variable charge soils was investigated, with the emphasis on the adsorption and desorption equilibria of Cu(II). The results showed that chromate can affect adsorption and desorption of Cu(II) in the colloidal systems of two variable charge soils. The extent of the effect was related to the initial concentrations of chromate and Cu(II), the system pH, and the nature of the soils. The presence of chromate led to an increase in the adsorption of Cu(II). For example, in the presence of 0.5, 0.8, 1.0, and 1.5 mmol L(-1) of chromate, for the rhodic ferralsol the adsorption of Cu(II) increased by 15.3, 18.0, 19.0, and 20.2%, respectively. For the hyperrhodic ferrasol, the corresponding figures were 11.9, 17.0, 20.3, and 26.1%, respectively. The presence of chromate also caused an increase in the desorption of Cu(II). For instance, in the presence of 0.5, 1.0, and 1.5 mmol L(-1) of chromate, the desorption for the rhodic ferralsol increased by 16.9, 27.5, and 34.1%, respectively. For the hyperrhodic ferralsol, the corresponding figures were 18.1, 35.6, and 51.4%, respectively. The increments of the adsorption and desorption increased with the increase in equilibrium concentration of Cu(II) in the solution. For instance, when the equilibrium concentrations were 0.5, 1.0, 1.5, and 2.0 mmol L(-1), the increments for the rhodic ferralsol were 2.5, 3.2, 3.3, and 3.0 mmol kg(-1), respectively. For the hyperrhodic ferralsol, the corresponding figures were 2.9, 3.5, 4.0, and 4.2 mmol kg(-1), respectively. The effect of chromate for the hyperrhodic ferralsol was greater than that for the rhodic ferralsol. This is caused by the difference in the content of iron oxides for the two soils. The increments of the adsorption and the desorption of Cu(II) increased with the rise in pH, reaching a maximum value, and then decreased. It can be assumed that the increment of the adsorption was caused by the change in surface charge of the soils induced by the adsorption of chromate and the cooperative adsorption of chromate adsorbed and Cu(II). The increase of electrostatically adsorbed Cu(II) was responsible for the increase in the desorption of Cu(II).     

自组装方法与三维光子晶体制作

光子晶体,特别是三维光子晶体,可能成为信息处理和通信等领域的新型功能材料.光子晶体的制作方法可分为"自上而下"的物理方法和"自下而上"的化学自组装方法.化学自组装方法是制作三维光子晶体最为经济有效的方法.本文在阐述自组装方法的种类、一般过程、优点和不足等内容的基础上,分别分析和总结了带有各种功能缺陷的三维光子晶体的制作,这些缺陷主要包括线缺陷、面缺陷和点缺陷.从研究中可以看出,化学自组装方法通常需要结合其他方法才能实现缺陷的嵌入.近些年,三维光子晶体制作在材料选取、结构设计和方法改进等方面都有一些最新进展,本文对此进行了较为详尽的评述,并对我们课题组的研究进行了总结.最后对光子晶体的研究和制作方向进行了展望.     

Theoretical ONIOM2 study on pyridine adsorption in the channels and intersection of ZSM-5

The structures of the acid sites in the channels and intersections of H-, Li-, and Na-ZSM-5 (ZSM = zeolite socony mobil) and their interactions with pyridine molecule have been computed by using three corresponding models containing 22 tetrahedral sites. The calculated adsorption energies of pyridine in the intersection regions of H-, Li-, and Na-ZSM-5 are 197.0, 172.5, and 122.3 kJ/mol, respectively, in good agreement with the respective experimental values of 200 +/- 5, 155-195, and 120 kJ/mol, while those in the straight and sinusoidal channels are much smaller (157.9 and 127.6, 152.2 and 149.4, and 150.4 and 109.9 kJ/mol, respectively). These indicate that the most probable adsorption site for pyridine in ZSM-5 is the acidic site located in the intersection region. The structural parameters of the adsorption complexes show that the acidic proton in the three models of H-ZSM-5 has been transferred to the nitrogen of pyridine, while in alkali cation-exchanged ZSM-5, the coordination of the alkali cation to the nitrogen atom of pyridine dominates the overall interaction. In addition, the adsorption complexes were further stabilized by the long-range electrostatic interaction between the positively charged pyridine hydrogen atoms and the negatively charged lattice oxygen atoms of the zeolite framework. In the intersection regions of H-, Li-, and Na-ZSM-5, the coordination energy of the charge-compensating cation to the pyridine nitrogen amounts to 58, 60, and 68% of the total adsorption energy, respectively, while another 42, 40, and 32%, respectively, is due to long-range electrostatic interactions. This indicates that the zeolite lattice framework surrounding the adsorption site has important contributions to the adsorption energy of the pyridine molecule.     

低温等离子体在锂离子电池材料中的应用

综合评述了低温等离子体技术的基本原理、 常用方法及其在锂离子电池材料领域中的研究进展, 重点评述了等离子体技术在锂离子电池正极、 负极、 隔膜及固态电解质等重要组分中的材料制备与表面改性方面的主要研究结果和应用优势, 并对其所面临的挑战和未来的应用方向进行了展望.     

类水滑石材料主客体插层结构的构筑及特性的理论研究

因主体层板和层间客体具有丰富的可调性, 类水滑石材料(LDHs)在催化、 吸附、 生物医药及光、 电、 磁等方面展现出了广阔的应用前景. 近年来理论研究已成为揭示LDHs微观结构和性质的重要手段, 本文系统综述了LDHs材料主体结构、 客体结构以及主客体相互作用3个方面的理论研究工作进展, 及其在作为光驱动催化剂方面应用的理论研究. 从主体元素构成、 元素比例、 电荷分布、 拓扑结构转变、 能带结构、 态密度、 层间阴离子组成、 离子交换性能、 主客体作用力、 能量性质及光催化性能等方面, 在原子、 电子尺度上揭示了LDHs材料结构-性能之间的构效关系, 为以其为材料平台构筑一系列基于超分子插层结构主客体间相互作用的新型功能材料、 扩展材料的功能性提供了丰富的理论信息和有益指导.     

纳米粒子的精准组装

纳米材料由于其独特的光、电、磁、力学等性质,成为了构建功能材料与器件的理想基元。实现纳米粒子的精确组装,是探究粒子之间的耦合聚集性质和制备宏观功能器件的基础。但是由于纳米粒子的小尺寸以及在溶液中运动的随机性与复杂性,精准控制纳米粒子组装体的形貌以及在空间中的相对位置仍存在巨大挑战。为了将纳米粒子组装成理想的有序结构,许多控制粒子组装的策略与方法得到发展。本文首先概述了纳米粒子自组装的控制方法与典型形貌,着重分析了影响粒子精准排布的因素与控制方法,并对纳米粒子及其组装体的光学性质与器件应用的最新研究进展进行了讨论,最后对目前纳米粒子精准组装所面临的挑战以及未来发展的方向进行了展望。