Effects of residual metal compounds and chain-end structure on thermal degradation of poly(3-hydroxybutyric acid)

Thermal degradation behaviours of poly(3-hydroxybutyric acid) (P(3HB); bacterial poly[(R)-3-hydroxybutyric acid] and synthetic poly[(R,S)-3-hydroxybutyric acid] samples, were examined under both isothermal and non-isothermal conditions. The inverse of number-average degree of polymerisation for all P(3HB) samples decreased linearly with degradation time during the initial stage of isothermal degradation at a temperature ranging from 170-190 °C. In addition, crotonyl unit was detected in the residual polymer samples as main ω-chain-end. These results indicate that the dominant thermal degradation reaction for P(3HB) is a random chain scission via cis-elimination reaction of P(3HB) molecules. It was found that the presence of either Ca or Mg ions enhances the depolymerisation of P(3HB) molecules, while that Zn ions hardly catalyse the reaction. As a result, a shift of thermogravimetric curves toward the lower temperature regions was observed for the P(3HB) samples containing high amounts of Ca and Mg compounds.     

Adsorption of biopolyester depolymerase on silicon wafer and poly[(R)-3-hydroxybutyric acid] single crystal revealed by real-time AFM

The adsorption behavior of PHB depolymerase from R. pickettii T1 on a silicon wafer and on P(3HB) single crystals has been studied by real-time and AFM in air and a buffer solution. First, the morphology of PHB depolymerase adsorbed on a silicon wafer was characterized to show that one molecule of PHB depolymerase has dimensions of 2.2 +/- 0.7 nm height and 16 +/- 5 nm width. The observation of PHB depolymerase adsorbed on a P(3HB) single crystal indicated that the dimensions of enzyme on the crystalline surface in air were 1.2 +/- 0.5 nm high and 28 +/- 7 nm wide, while enzyme molecules with dimensions of 2.1 +/- 0.6 nm height and 16 +/- 7 nm width were detected in a buffer solution. Comparison of the dimensions of PHB depolymerase in air with those in a buffer solution showed that the enzyme was squashed in air, but not in a buffer solution. In addition, the influence of enzymatic adsorption on the molecular state of the P(3HB) crystalline surface was investigated. The AFM images of P(3HB) single crystals after enzymatic adsorption and washing with ethanol indicated that the adhesion of PHB depolymerase changed the molecular state and generated holes on the crystalline surface.     

Thermal degradation behavior of poly(4-hydroxybutyric acid)

Thermal degradation behavior of poly(4-hydroxybutyric acid) (P(4HB)) was investigated by thermogravimetric and pyrolysis-gas chromatography mass spectrometric analyses under both isothermal and non-isothermal conditions. Based on the thermogravimetric analysis, it was found that two distinct processes occurred at temperatures below and above 350 °C during the non-isothermal degradation of P(4HB) samples depending on both the molecular weight and the heating rate. From ¹H NMR analysis of the residual P(4HB) molecules after isothermal degradations at different temperatures, it was confirmed that the ω-hydroxyl chain-end was remained unchanged in the residual P(4HB) molecules at temperatures below 300 °C, while the ω-chain-end of P(4HB) molecules was converted to 3-butenoyl units at temperatures above 300 °C. In contrast, the majority of the volatile products evolved during thermal degradation of P(4HB) was γ-butyrolactone regardless of the degradation temperature. From these results, it is concluded that during the thermal degradation of P(4HB), the selective formation of γ-butyrolactone via unzipping reaction from the ω-hydroxyl chain-end predominantly occurs at temperatures below 300 °C. At temperatures above 300 °C, both the cis-elimination reaction of 4HB unit and the formation of cyclic macromolecules of P(4HB) via intramolecular transesterification take place in addition to unzipping reaction from the ω-hydroxyl chain-end. Finally, the primary reaction of thermal degradation of P(4HB) at temperatures above 350 °C progresses by the cyclic rupture via intramolecular transesterification of P(4HB) molecules with a release of γ-butyrolactone as volatile product. Moreover, we carried out the thermal degradation tests for copolymer of 93 mol% of 4HB with 7 mol% of 3-hydroxybutyric acid (3HB) to examine the effect of 3HB units on thermal stability of P(4HB).     

Y443F mutation in the substrate-binding domain of extracellular PHB depolymerase enhances its PHB adsorption and disruption abilities

Extracellular poly[(R)-3-hydroxybutyrate] (PHB) depolymerase (PhaZ_RpiT1) from Ralstonia pickettii T1 adsorbs to the PHB surface via its substrate-binding domain (SBD) and cleaves the PHB chain using its catalytic domain. Our previous study (Biomacromolecules 2010; 11: 113-119) has suggested that the hydrophobic interaction between the amino acid residues at positions 441, 443, and 445 in the SBD and the PHB surface plays a crucial role in facilitating the association phase of the enzyme adsorption process. In the present study, in order to improve PhaZ_RpiT1 for effective PHB degradation, we targeted Tyr at position 443 for substitution with a more highly hydrophobic amino acid residue because its hydrophobicity shows medium to high degree compared to those of general naturally occurring amino acid residues. We designed a mutant enzyme with an amino acid substitution at this position, taking the following factors into consideration: (1) to achieve higher hydrophobicity than the original residue, (2) to retain the β-sheet structure, and (3) to change as little as possible the volume of the amino acid residue after the substitution. As a result, the substitution of Tyr443 with Phe (Y443F) was considered to be appropriate. The purified Y443F enzyme showed identical CD spectrum and hydrolysis activity for a water-soluble substrate with the wild type, indicating that the mutation had no influence on the structure and the ester bond cleavage activity. In contrast, the Y443F enzyme had higher PHB degradation activity than the wild type. Kinetic analysis of PHB degradation suggests that this amino acid substitution promoted not only the adsorption of the mutant enzyme to PHB, but also the disruption of the PHB surface to enhance the hydrolysis of the PHB polymer chain.     

Degradation behaviors of polyester monolayers at the air/water interface: Alkaline and enzymatic degradations

The degradation kinetics of Langmuir monolayer films of a series of biodegradable polyesters has been studied to investigate the effect of degradation medium, alkalinity and enzymes. The degradation behavior of polyester monolayers strongly depended on both degradation medium and surface pressure. As the surface pressure was increased, the degradation rates of poly(l-lactide) (PLLA) and poly[(R)-3-hydroxybutyrate] (P(3HB)) increased in both degradation media. When monolayers were exposed to an alkaline subphase, the degradation of PLLA monolayers occurred at relatively low surface pressures; the PLLA monolayers were hydrolyzed at pH 10.5 regardless of surface pressure, while the alkaline degradation of P(3HB) monolayer occurred over a constant surface pressure of 7 mN/m at pH 11.8. These results have been explained by the difference in hydrophilic/hydrophobic balance of the polymers; PLLA is more hydrophilic than P(3HB). In contrast, the enzymatic degradations of both polymer monolayers occurred at higher constant surface pressures than those of the alkaline treatment; 7 mN/m for PLLA and 10 mN/m for P(3HB). This behavior was attributed to the enzymes being much larger than the alkaline ions: the enzymes need a larger contact area with the submerged monolayers to be activated.     

Mechanical properties and enzymatic degradation of poly[(R)-3-hydroxybutyrate] fibers stretched after isothermal crystallization near Tg

Poly[(R)-3-hydroxybutyrate] (P(3HB)) fibers with high tensile strength were prepared by stretching the fibers after isothermal crystallization near the glass transition temperature. Two samples with different molecular weights (M_w = 0.7 × 10⁶ and 4.3 × 10⁶) were used to investigate the effect on tensile strength. Increasing the time for isothermal crystallization of P(3HB) fibers resulted in a decrease in the maximum draw ratio. But, the tensile strength of P(3HB) fibers increased remarkably when the isothermal crystallization time was prolonged to more than 24 h. The tensile strength of low-molecular-weight drawn fibers was higher than that of high-molecular-weight fibers. Therefore, it can be concluded that this procedure does not increase the tensile strength of the high-molecular-weight drawn fibers. This is because, in this drawing method, small crystal nuclei grow initially during the isothermal crystallization process. Then, the molecular chains between the small crystal nuclei that acted as the entanglement points are oriented by stretching. In the case of the high-molecular-weight fibers, because the molecular length between the entanglement points of the small crystal nuclei is too long, the molecular chains are not sufficiently oriented by the stretching process. However, in the case of the low-molecular-weight fibers, the molecular length is suitable for generating the extended chains. Based on the result of X-ray analysis of P(3HB) fibers stretched after isothermal crystallization, fibers have the oriented α-form crystal with 2₁ helix conformation and β-form with planar zigzag conformation. The enzymatic degradation of the stretched P(3HB) fibers was performed by using an extracellular PHB depolymerase purified from Ralstonia pickettii T1. The enzymatic erosion rate of β-form was faster than that of α-form in the P(3HB) fibers stretched after isothermal crystallization.     

Mechanical properties, structure analysis and enzymatic degradation of uniaxially cold-drawn films of poly[(R)-3-hydroxybutyrate-co-4-hydroxybutyrate]

Poly[(R)-3-hydroxybutyrate-co-4-hydroxybutyrate] (P(3HB-co-4HB)) films were prepared by uniaxial cold-drawing from an amorphous preform at a temperature below, but close to the glass transition temperature. Molecular and highly-ordered structures and physical properties of cold-drawn films were investigated by tensile testing, wide-angle X-ray diffraction and small-angle X-ray scattering. Enzymatic degradation of P(3HB-co-4HB) films was performed using an extracellular polyhydroxybutyrate depolymerase purified from Ralstonia pickettii T1. Tensile strength, elongation to break and Young’s modulus of P(3HB-co-4HB) with cold-drawn ratio 1200% reached 290 MPa, 58% and 2.8 GPa, respectively. X-ray fibre diagrams of cold-drawn P(3HB-co-4HB) films showed a strong reflection on the equatorial line, indicating a planar zigzag conformation (β-form) together with 2₁ helix conformation (α-form). The β-form seems to contribute to the high tensile strength, and a new mechanism of generation of the β-form is proposed. The enzymatic degradation rate increased with increasing draw ratio, and increased greatly with increasing 4HB content.     

Biosynthesis of (R)-3-hydroxyalkanoic acids by metabolically engineered Escherichia coli

An efficient system for the production of (R)-hydroxyalkanoicacids (RHAs) was developed in natural polyhydroxyalkanoate (PHA)-producing bacteria and recombinant Escherichia coli. Acidic alcoholysis of purified PHA and in vivo depolymerization of PHA accumulated in the cells allowed the production of RHAs. In recombinant E. coli, RHA production was achieved by removing CoA from (R)-3-hydroxyacyl-CoA and by in vivo depolymerization of PHA. When the recombinant E. coli harboring the Ralstonia eutropha PHA biosynthesis genes and the depolymerase gene was cultured in a complex or a chemically defined medium containing glucose, (R)-3-hydroxybutyric acid (R3HB) was produced as monomers and dimers. R3HB dimers could be efficiently converted to monomers by mild alkaline heat treatment. A stable recombinant E. coli strain in which the R. eutropha PHA biosynthesis genes were integrated into the chromosome disrupting the pta gene was constructed and examined for the production of R3HB. When the R. eutropha intracellular depolymerase gene was expressed by using a stable plasmid containing the hok/sok locus of plasmid R1, R3HB could be efficiently produced.     

Chiral self-assembly of triorganotin complexes: Syntheses, characterization, crystal structures and antitumor activity of organotin(IV) complexes containing (R)-(+)-methylsuccinic acid, (S)-(+)-methylglutaric acid and l-(−)-malic acid ligands

Six new chiral triorganotin(IV) complexes, {(R₃Sn)₂[C₃H₆(COO)₂]}_n (R = Me: 1; Bu: 2), {(R₃Sn)₂[C₄H₈(COO)₂]}_n (R = Me: 3; Bu: 4), and {(R₃Sn)₂[C₂H₄O(COO)₂]}_n (R = Me: 5; Bu: 6) have been prepared by treatment of (R)-(+)-methylsuccinic acid, (S)-(+)-methylglutaric acid and l-(−)-malic acid, with the corresponding R₃SnCl (R = Me, Bu) and sodium ethoxide in methanol. All the complexes were characterized by elemental analysis, FT-IR, NMR (¹H, ¹³C, ¹¹⁹Sn) spectroscopy and TGA. Except for 3, all of the complexes were also characterized by X-ray crystallography. The structural analyses reveal that complexes 1 and 5 have 2D network structures in which (R)-(+)-methylsuccinic acid and l-(−)-malic acid act as tetradentate ligands coordinated to trimethyltin(IV) ions. Complexes 2 and 4 have 3D metal-organic framework structures in which the deprotoned acids serve as tetradentate ligands. Complex 6 adopts a 1D zigzag chain structure and forms a 2D supramolecular framework through intermolecular C-H?O interactions. In addition, the antitumor activities of complexes 1-6 have been studied. We also have measured the specific rotation of the chiral dicarboxylic acids and the organotin derivatives.     

Molecular organogels of the sodium salt of (R)-12-hydroxystearic acid and their templated syntheses of inorganic oxides

(R)-12-Hydroxystearic acid (HSA), a natural product from castor oil, is a well-known low-molecular mass organogelator (LMOG). Here, we demonstrate that the sodium salt of HSA, HSA-S, is an extremely versatile and efficient LMOG. Furthermore, its self-assembled fibrillar networks (SAFINs) in gels with ethanol, benzene, tetrahydrofuran, and dimethyl sulfoxide, as well as the gel of HSA with benzene, are shown to act as templates during the sol-gel polymerization of tetraethyl orthosilicate (TEOS) in the absence or presence of an external catalyst. The templated, fiber-like objects obtained after calcinations have been characterized. The shape of the templated silica is strongly influenced by the catalyst applied. In addition, it has been possible to effect the formation of assemblies of nanoscale objects of Fe₂O₃ and CuO by polymerization of appropriate precursors in HSA-S based gels and in suspensions, respectively, followed by drying and calcination. The procedures employed are efficient and inexpensive protocols to make porous nanomaterials using organogels. Typically, templated syntheses of such materials in organogels have employed less accessible and more structurally complex LMOGs than HSA-S or HSA. Electrostatic interactions via Na⁺ bridges or H-bonding between silicate intermediates and gelator strands are proposed to be a primary driving force for templating.     

Synthesis and characterization of polybinaphthalene incorporating chiral (R) or (S)-1,1′-binaphthalene and oxadiazole units by Heck reaction

Chiral conjugated polymers P-1 and P-2 were synthesized by the polymerization of (R)-3,3′-diiodo-2,2′-bisbutoxy-1,1′-binaphthalene ((R)-M-1) and (S)-3,3′-diiodo-2,2′-bisbutoxy-1,1′-binaphthalene ((S)-M-1) with 2,5-bis(4-vinylphenyl)-1,3,4-oxadiazole (M-2) under Pd-catalyzed Heck coupling reaction, respectively. Both monomers and polymers were analysed by NMR, MS, FT-IR, UV, DSC-TG, fluorescent spectroscopy, GPC and CD spectra. The chiral conjugated polymers exhibit strong Cotton effect in their circular dichroism (CD) spectra indicating a high rigidity of polymer backbone. CD spectra of polymers P-1 and P-2 are almost identical and have opposite signs for their position. These polymers have strong blue fluorescence.     

Analysis of European oak bark beetle (Scolytus intricatus) extracts using hyphenated and chiral chromatography techniques

Two bioactive compounds, viz. 4-methylheptan-3-ol (I) and 4-methylheptan-3-one (II) have been identified in European oak bark beetle (Scolytus intricatus) extracts by gas chromatography coupled with mass spectrometric and electroantennographic detector systems. Further examination of these compounds using gas chromatography on chiral stationary phases, as well as a comparison with optically active standards proved the absolute configuration of the identified compounds to be (3R,4S)-I and (S)-II. The discovery of (3R,4S)-I and (S)-II as insect-produced compounds in both sexes of S. intricatus constitutes the first reported occurrence in this species.     

Reaction of guaiazulene with o-formylbenzoic acid in diethyl ether (or methanol) in the presence of hexafluorophosphoric acid: comparative studies on H and C NMR spectral properties of 3-guaiazulenylmethylium- and 3-guaiazulenium-ion structures

Reaction of guaiazulene (1) with o-formylbenzoic acid (2) in diethyl ether in the presence of hexafluorophosphoric acid at 25 °C for 90 min gives the corresponding monocarbenium-ion compound, [2-(carboxy)phenyl](3-guaiazulenyl)methylium hexafluorophosphate (3), quantitatively, which upon treatment with aq NaHCO₃ leads to 3-(3-guaiazulenyl)-2-benzofuran-1(3H)-one (5) in 96% isolated yield. Similarly, reaction of 1 with 2 in methanol under the same conditions as the above reaction affords two kinds of inseparable monocarbenium-ion compounds, 3 and (3-guaiazulenyl)[2-(methoxycarbonyl)phenyl]methylium hexafluorophosphate (4) with an equilibrium between them, which upon reaction with a solution of NaBH₄ in ethanol at 25 °C for 30 min leads to 5 in 46% isolated yield and (3-guaiazulenyl)[2-(methoxycarbonyl)phenyl]methane (6) in 37% isolated yield. Along with the ¹H and ¹³C NMR spectral properties of a solution of 5 in trifluoroacetic acid-d₁ at 25 °C, whose molecular structure is converted to a ca. 1:1 equilibrium mixture of 7 possessing a partial structure of the 3-guaiazulenylmethylium-ion and 8 possessing a partial structure of the 3-guaiazulenium-ion, comparative studies on the ¹H and ¹³C NMR spectral properties of 7 and 8 with those of the monocarbenium-ion compound, (3-guaiazulenyl)[4-(methoxycarbonyl)phenyl]methylium hexafluorophosphate (A), 5, and 6 are reported. From these NMR studies, it can be inferred that the positive charge of the 3-guaiazulenylmethylium-ion part of 7 apparently is transferred to the seven-membered ring, generating a resonance form of the 3-guaiazulenylium-ion structure η′, and the same result can be inferred for the previously documented monocarbenium-ion compounds A-I. Moreover, referring to a comparative study on the C-C bond lengths of A observed by the X-ray crystallographic analysis with those of the optimized (3-guaiazulenyl)[4-(methoxycarbonyl)phenyl]methylium-ion structure for A calculated by a WinMOPAC (Ver. 3.0) program using PM3, AM1, or MNDOD as a semiempirical Hamiltonian, the optimized [2-(carboxy)phenyl](3-guaiazulenyl)methylium-ion structure for 3 calculated using PM3 is described.     

Degradation kinetics of poly(lactic-co-glycolic) acid block copolymer cast films in phosphate buffer solution as revealed by infrared and Raman spectroscopies

Poly(lactic-co-glycolic) acid (PLGA) is an important copolymer used in drug delivery platforms where controlled release is required. In this work we investigated the in vitro degradation of four PLGA copolymers with L/G molar compositions of 50/50, 65/35, 75/25 and 95/5. ATR-IR and Raman spectroscopies were used to differentiate and quantify the degradation rates of glycolic and lactic units. Both techniques were used to determine the polymer composition as a function of degradation time and the degradation rate constants for the hydrolysis of glycolic and lactic units were calculated using a 1st order kinetics approach. Our results revealed a two stage process for the degradation of PLGA cast films in PBS in agreement with our previous work. The degradation rate constant for glycolic unit was found to be 1.3 times higher than for lactic units. In addition the degradation rate constants for L and G units were shown to decrease proportionally with increasing initial lactic content of the copolymer used to prepare the films.     

Enhanced interlayer interaction in cellulose single nanofibre and poly(l-lactic acid) layered films by plasma-initiated surface grafting of poly(acrylic acid) onto poly(l-lactic acid) films

The surface of a poly(l-lactic acid) (PLLA) film was modified with poly(acrylic acid) (PAA) by plasma-initiated polymerization to increase the interaction between PLLA and cellulose single nanofibres (CSNF). The surface wettability of the PAA grafted PLLA film (PLLA-PAA film) was investigated by contact angle measurements. Modification of the PLLA film with PAA decreased the contact angle from 61° to 50°. The surface morphologies of the PLLA film, PLLA-PAA film and CSNF-coated PLLA-PAA film were studied by atomic force microscopy. The interaction between the CSNF and PLLA layers was strengthened by incorporation of a PAA layer onto the PLLA films and it is higher than 2N as proved by a peeling test. This is probably because the carboxyl groups of PAA form hydrogen bonds with the hydroxyl groups of CSNF.     

Molecular weight effect on the complexation of poly(methacrylic acid) and poly(ethylene oxide) as studied by high-resolution solid-state C NMR spectroscopy

Complexes of poly(methacrylic acid) (PMAA) and poly(ethylene oxide) (PEO) with different PEO molecular weight were studied by solid-state high-resolution ¹³C NMR spectroscopy, with the emphasis on the PEO molecular weight effect on inter-polymer interaction, morphology and molecular motion. It is found that the crystalline phase of PEO is completely destroyed in the complex. The results of ¹H transverse relaxation times and ¹³C spin-lattice relaxation times indicate that the chain mobility of both PEO and PMAA are greatly restricted by inter-molecular hydrogen-bonding interactions, especially when the molecular weight of PEO is 1500. The bulk structures of the complexes are found to be closely dependent on the molecular weight of PEO. The fraction of “free” PEO segments without forming hydrogen-bonds with PMAA increases with increasing PEO molecular weight.     

Rapid swelling and deswelling in cryogels of crosslinked poly(N-isopropylacrylamide-co-acrylic acid)

Thermally sensitive hydrogels of poly[N-isopropylacrylamide (NIPA)-co-acrylic acid (AA)] hydrogels with N,N-methylene bisacrylamide (BIS) as crosslinker have been synthesized via a two-step procedure in which, the initial polymerisation is conducted for various times at 18 °C, this step being followed by polymerisation for one fixed time at −22 °C. The gravimetrically determined rates of swelling/deswelling for these materials termed “cryogels” prepared by this two-step polymerisation are much higher than those for the same type of hydrogel prepared via conventional methods (30 °C for 24 h). For example the time for the former xerogel to take up 70% of its final water content at 25 °C is just 18 min, compared with a time 300 min for the latter to attain the same uptake of water. During deswelling (shrinking) at 50 °C, which is above the lower critical temperature, the hydrogel loses 60 and 90 wt% water in 1 and 10 min respectively, compared to a timescale for the corresponding crosslinked copolymers prepared by conventional methods of about 100 min for 50 wt% water loss. A third type of hydrogel was made by a cold treatment (CT), for which the hydrogel prepared by conventional polymerization was stored in the frozen state. The swelling rate of these CT xerogels was the same as that for xerogels prepared by conventional polymerization, but the deswelling rate of the former was higher than that of the latter; for example, during deswelling, a loss of 90% water is attained within a few minutes.Scanning electron microscopy, digital photographs and flotation experiments together with swelling ratio studies reveal that the polymeric network of cryogel produced by the two-step polymerization method is characterized by an open structure with more pores and higher swelling ratio but lower mechanical strength compared to the conventional hydrogels. Such rapid response hydrogels have potential applications in separation and drug release technologies for example.     

Dibutyltin(IV) complexes of the 5-[(E)-2-(Aryl)-1-diazenyl]-2-hydroxybenzoic acid ligand: an investigation of structures by X-ray diffraction, solution and solid state tin NMR, electrospray ionisation MS and assessment of in vitro cytotoxicity

A series of dibutylbis{5-[(E)-2-(aryl)-1-diazenyl]-2-hydroxybenzoato}tin(IV) complexes, Bu₂Sn(LH)₂, have been prepared and characterized by ¹H, ¹³C, ¹¹⁹Sn NMR and ESI mass spectrometry in solution. The structures of the complexes Bu₂Sn(L¹H)₂ (1), Bu₂Sn(L³H)₂ (3), Bu₂Sn(L⁴H)₂ (4), and Bu₂Sn(L⁶H)₂ (6) (L = 5-[(E)-2-(aryl)-1-diazenyl]-2-hydroxybenzoate: aryl = phenyl (L¹H), 3-methylphenyl (L³H), 4-methylphenyl (L⁴H) and 4-bromophenyl (L⁶H)) were determined by X-ray crystallography and ¹¹⁷Sn CP-MAS NMR spectroscopy in the solid state. In general, the complexes were found to adopt a skew-trapezoidal bipyramidal arrangement around the tin atom. In addition, there are weak bridging intermolecular Sn?O contacts in complexes 1 and 3, but not in 4 and 6, where one of the hydroxy oxygen atoms from a neighboring molecule coordinates weakly with the Sn atom, thereby completing a seventh coordination site in the extended Sn coordination sphere. The Sn?O distance is 3.080(2) and 3.439(2) Å in 1 and 3, respectively, which are significantly shorter than the sum of the van der Waals radii of the Sn and O atoms (∼3.8 Å). In 1, this Sn?O interaction links the molecules into polymeric chains. In 3, these interactions link pairs of molecules into head-to-head dimeric units. The in vitro cytotoxicity of compound 2 indicates better results than cisplatin and etoposide against seven well characterized human tumor cell lines.     

Rapid synthesis of optically active poly(amide-imide)s by direct polycondensation of aromatic dicarboxylic acid with aromatic diamines

4,4^′-(Hexafluoroisopropylidene)-N,N^′-bis(phthaloyl-l-leucine-p-amidobenzoic acid) (2) was prepared from the reaction of 4,4^′-(hexafluoroisopropylidene)-N,N^′-bis(phthaloyl-l-leucine) diacid chloride with p-aminobenzoic acid. The direct polycondensation reaction of monomer (2) with p-phenylenediamine (2a), 4,4^′-diaminodiphenylsulfone (2b), 2,4-diaminotoluene (2c), 2,6-diaminopyridine (2d), m-phenylene diamine (2e), benzidine (2f), 4,4^′-diaminodiphenylether (2g) and 4,4^′-diaminodiphenyl methane (2h) was carried out in a medium consisting of triphenyl phosphite, N-methyl-2-pyrolidone, pyridine, and calcium chloride. The homogeneous mixture was heated at 220 °C for 1 min under nitrogen. The resulting poly(amide-imide)s (PAIs) having inherent viscosities 0.27-0.78 dl/g were obtained in high yield and are optically active and thermally stable. All of the above polymers were fully characterized by IR spectroscopy, elemental analyses and specific rotation. Some structural characterization and physical properties of this new optically active PAIs are reported.     

Di-n-octyltin(IV) complexes with 5-[(E)-2-(aryl)-1-diazenyl]-2-hydroxybenzoic acid: Syntheses and assessment of solid state structures by Sn Mössbauer and X-ray diffraction and further insight into the solution structures using electrospray ionization MS, Sn NMR and variable temperature NMR spectroscopy

Reactions of 5-[(E)-2-(aryl)-1-diazenyl]-2-hydroxybenzoic acids (LHH′, where the aryl group is an R-substituted phenyl ring such that for L¹HH′: X = H; L²HH′: X=2′-OCH₃; L³HH′: X = 3′-CH₃; L⁴HH′: X = 4′-CH₃; L⁵HH′:X = 4′-Cl) with ⁿOct₂SnO in 2:1 and 1:1 molar ratios have been investigated. Two types of complexes, ⁿOct₂Sn(LH)₂ and {[ⁿOct₂Sn(LH)]₂O}₂, were isolated and they have been characterized by ¹H, ¹³C, ¹¹⁹Sn NMR, ESI-MS, IR and ^119mSn Mössbauer spectroscopic techniques in combination with elemental analyses. The crystal structures of ⁿOct₂Sn(L¹H)₂ (1), {[ⁿOct₂Sn(L²H)]₂O}₂ (3) and {[ⁿOct₂Sn(L³H)]₂O}₂(4) were determined. The mononuclear complex 1 was found to adopt a skew-trapezoidal bipyramidal arrangement around the tin atom while 3 and 4 are centrosymmetric tetranuclear bis(dicarboxylatotetrabutyldistannoxane) complexes containing a planar Sn₄O₂ core in which two μ₃-oxo O-atoms connect an Sn₂O₂ ring to two exocyclic Sn-atoms. The solution structures were confirmed by ¹¹⁹Sn NMR spectroscopy by observing one tin resonance in compound 1 and two tin resonances in {[ⁿOct₂Sn(L⁵H)]₂O}₂ (5). {[ⁿOct₂Sn(L²H)]₂O}₂ (3) and {[ⁿOct₂Sn(L³H)]₂O}₂ (4) undergo very complex exchange processes in deuteriochloroform solution, which has been confirmed by variable temperature ¹H NMR spectroscopy. The cleavage of the most labile bond in the molecule was studied by ESI mass spectrometry.