Mechanical properties, structure analysis and enzymatic degradation of uniaxially cold-drawn films of poly[(R)-3-hydroxybutyrate-co-4-hydroxybutyrate]

Poly[(R)-3-hydroxybutyrate-co-4-hydroxybutyrate] (P(3HB-co-4HB)) films were prepared by uniaxial cold-drawing from an amorphous preform at a temperature below, but close to the glass transition temperature. Molecular and highly-ordered structures and physical properties of cold-drawn films were investigated by tensile testing, wide-angle X-ray diffraction and small-angle X-ray scattering. Enzymatic degradation of P(3HB-co-4HB) films was performed using an extracellular polyhydroxybutyrate depolymerase purified from Ralstonia pickettii T1. Tensile strength, elongation to break and Young’s modulus of P(3HB-co-4HB) with cold-drawn ratio 1200% reached 290 MPa, 58% and 2.8 GPa, respectively. X-ray fibre diagrams of cold-drawn P(3HB-co-4HB) films showed a strong reflection on the equatorial line, indicating a planar zigzag conformation (β-form) together with 2₁ helix conformation (α-form). The β-form seems to contribute to the high tensile strength, and a new mechanism of generation of the β-form is proposed. The enzymatic degradation rate increased with increasing draw ratio, and increased greatly with increasing 4HB content.     

Molecular weight characterization of poly[(R)-3-hydroxybutyrate] synthesized by genetically engineered strains of Escherichia coli

This study investigated the relationship of growth conditions, host strains and molecular weights of poly[(R)-3-hydroxybutyrate] [P(3HB)] synthesized by genetically engineered Escherichia coli. Various PHA synthases belonging to types I-IV enzymes were expressed in E. coli JM109 under the same experimental conditions, and the molecular weights of the polymers were characterized by gel permeation chromatography. The results demonstrate that P(3HB) polymers have varied molecular weights and polydispersities dependent on the characteristics of the individual PHA synthase employed. P(3HB) with high number-average molecular weights (M_n) [(1.5-4.0) × 10⁶] and narrow polydispersities (1.6-1.8) were synthesized by PHA synthases from Ralstonia eutropha (type I), Delftia acidovorans (type I) and Allochromatium vinosum (type III). Contrary to these, P(3HB) with relatively low M_n [(0.17-0.79) × 10⁶] and broad polydispersities (2.2-9.0) were synthesized by PHA synthases from Aeromonas caviae (type I), Pseudomonas sp. 61-3 (type II) and Bacillus sp. INT005 (type IV). Furthermore, the molecular weights of P(3HB) synthesized under various culture conditions, in various hosts of E. coli and by mutants of PHA synthase were characterized. It was found that, in addition to culture pH [Kusaka et al. Appl Microbiol Biotechnol 1997;47:140], other variances such as culture temperature, host strain and use of mutants are effective in changing polymer molecular weight.     

Thermal degradation behavior of poly(4-hydroxybutyric acid)

Thermal degradation behavior of poly(4-hydroxybutyric acid) (P(4HB)) was investigated by thermogravimetric and pyrolysis-gas chromatography mass spectrometric analyses under both isothermal and non-isothermal conditions. Based on the thermogravimetric analysis, it was found that two distinct processes occurred at temperatures below and above 350 °C during the non-isothermal degradation of P(4HB) samples depending on both the molecular weight and the heating rate. From ¹H NMR analysis of the residual P(4HB) molecules after isothermal degradations at different temperatures, it was confirmed that the ω-hydroxyl chain-end was remained unchanged in the residual P(4HB) molecules at temperatures below 300 °C, while the ω-chain-end of P(4HB) molecules was converted to 3-butenoyl units at temperatures above 300 °C. In contrast, the majority of the volatile products evolved during thermal degradation of P(4HB) was γ-butyrolactone regardless of the degradation temperature. From these results, it is concluded that during the thermal degradation of P(4HB), the selective formation of γ-butyrolactone via unzipping reaction from the ω-hydroxyl chain-end predominantly occurs at temperatures below 300 °C. At temperatures above 300 °C, both the cis-elimination reaction of 4HB unit and the formation of cyclic macromolecules of P(4HB) via intramolecular transesterification take place in addition to unzipping reaction from the ω-hydroxyl chain-end. Finally, the primary reaction of thermal degradation of P(4HB) at temperatures above 350 °C progresses by the cyclic rupture via intramolecular transesterification of P(4HB) molecules with a release of γ-butyrolactone as volatile product. Moreover, we carried out the thermal degradation tests for copolymer of 93 mol% of 4HB with 7 mol% of 3-hydroxybutyric acid (3HB) to examine the effect of 3HB units on thermal stability of P(4HB).     

Effects of residual metal compounds and chain-end structure on thermal degradation of poly(3-hydroxybutyric acid)

Thermal degradation behaviours of poly(3-hydroxybutyric acid) (P(3HB); bacterial poly[(R)-3-hydroxybutyric acid] and synthetic poly[(R,S)-3-hydroxybutyric acid] samples, were examined under both isothermal and non-isothermal conditions. The inverse of number-average degree of polymerisation for all P(3HB) samples decreased linearly with degradation time during the initial stage of isothermal degradation at a temperature ranging from 170-190 °C. In addition, crotonyl unit was detected in the residual polymer samples as main ω-chain-end. These results indicate that the dominant thermal degradation reaction for P(3HB) is a random chain scission via cis-elimination reaction of P(3HB) molecules. It was found that the presence of either Ca or Mg ions enhances the depolymerisation of P(3HB) molecules, while that Zn ions hardly catalyse the reaction. As a result, a shift of thermogravimetric curves toward the lower temperature regions was observed for the P(3HB) samples containing high amounts of Ca and Mg compounds.     

Evolution of structural features and mechanical properties during the conversion of poly[(methylamino)borazine] fibers into boron nitride fibers

Poly[(methylamino)borazine] (PolyMAB) green fibers of a mean diameter of 15 μm have been pyrolyzed under ammonia up to 1000°C and heat treated under nitrogen up to 2000°C to prepare boron nitride (BN) fibers. During the polymer-to-ceramic conversion, the mechanical properties of the green fibers increase within the 25-400°C temperature range owing to the formation of a preceramic material and remain almost constant up to 1000°C. Both the crystallinity and the mechanical properties slightly increase within the 1000-1400°C range, in association with the consolidation of the fused-B₃N₃ basal planes. A rapid increase in tensile strength (σ^R) and elastic modulus (Young's modulus E) is observed in relation with crystallization of the BN phase for fibers treated between 1400°C and 1800°C. At 2000°C, “meso-hexagonal” BN fibers of 7.5 μm in diameter are finally obtained, displaying values of σ^R=1.480 GPa and E=365 GPa. The obtention of both high mechanical properties and fine diameter for the as-prepared BN fibers is a consequence of the stretching of the green fibers on a spool which is used during their conversion into ceramic.     

Studies on Macromolecular Complexing Agents. II. Effects of Polypropylene Oxide on the Copolymerization Reaction between Butadiene and Styrene

ABSTRACT

Ultra-high-molecular-weight poly[(R)-3-hydroxybutyrate](P(3HB)) was biosynthesized from glucose by a recombinant Escherichia coli XL-1 Blue (pSYL105) harboring Alcaligenes eutrophus PHB biosynthesis phbCAB genes. Six kinds of P(3HB) samples with differ-ent weight-average molecular weight (M_w ) from 1.1 × 10⁶ to 11 × 10⁶ measured by multi-angle laser light scattering were respectively produced at pH values of 7.0 to 6.5 in culture media. Solvent-cast P(3HB) films of high-molecular-weights over M_w of 3.3 × 10⁶ were stretched easily and reproducibly at 160°C to a draw ratio of 400-650%. Mechanical properties of the stretched P(3HB) films were markedly improved relative to those of solvent-cast film. The elongation to break, Young's modulus, and tensile- strength of stretched film (M_w = 11 × 10⁶) were 58%, 1.1 GPa, and 62 MPa, respectively. X-ray diffraction patterns indicated that the stretched film was highly oriented and had a high crystallinity over 80%. When the stretched film was annealed at 160°C for 2 hours, the mechanical properties were further improved (elongation to break = 67%, Young's modulus = 1.8 GPa and tensile strength = 77 MPa). The mechanical properties of the stretched-annealed film remained almost unchanged for 6 months at room temperature, suggesting that a high crystallinity of the stretched-annealed film avoids a progress of secondary crystallization.

     

Adsorption effects of poly(hydroxybutyric acid) depolymerase on chain-folding surface of polyester single crystals revealed by mutant enzyme and frictional force microscopy

Adsorption effects of poly(hydroxybutyric acid) (PHB) depolymerase from Ralstonia pickettii T1 on various polymer single crystals were studied using a catalytically inactive mutant of PHB depolymerase by means of transmission electron microscopy (TEM), atomic force microscopy (AFM), and frictional force microscopy (FFM). Six types of polymer single crystals, poly[(R)-3-hydroxybutyric acid] (P(3HB)), poly[(R)-3-hydroxybutyric acid-co-6 mol% (R)-3-hydroxyvaleric acid] (P(3HB-co-6 mol% 3HV)), poly[(R)-3-hydroxybutyric acid-co-8 mol% (R)-3-hydroxyhexanoic acid] (P(3HB-co-8 mol% 3HH)), poly(l-lactic acid) (PLLA), poly(d-lactic acid) (PDLA), and polyethylene (PE), were prepared to examine the influence of an ester bond and stereoregularity of a polymer on the enzymatic adsorption. The numbers of PHB depolymerase enzymes adsorbed on P(3HB) and P(3HB-co-6 mol% 3HV) single crystals were determined as 171 and 183 enzymes/μm² by AFM, respectively. AFM observation revealed that the concentration of PHB depolymerase enzymes adsorbed onto PLLA and PDLA single crystals is much higher compared to those on a P(3HB) single crystal, whereas the concentration of enzyme adsorbed onto PE and P(3HB-co-8 mol% 3HH) single crystals is much less. In addition, the single crystals of each polymer were characterized by TEM and FFM before and after enzymatic treatment by mutant for 1 h at 37 °C. The surface properties of P(3HB), P(3HB-co-6 mol% 3HV), and P(3HB-co-8 mol% 3HH) single crystals were changed by the enzymatic adsorption, whereas the internal structures were not affected. On the basis of these results, the properties of the binding domain of PHB depolymerase to polymer chain-folding surfaces have been discussed.     

Morphology, isothermal and non-isothermal crystallization kinetics of poly(methylene terephthalate)

The morphology of crystals, isothermal and non-isothermal crystallization of poly(methylene terephthalate) (PMT) have been investigated by using polarized optical microscopy and differential scanning calorimeter (DSC). The POM photographs displayed only several Maltese cross at the beginning short time of crystallization indicating that some spherulites had been formed. The crystal cell belonged to the Triclinic crystal systems and the cell dimensions were calculated from the WAXD pattern. The commonly used Avrami equation and that modified by Jeziorny were used, respectively, to fit the primary stage of isothermal and non-isothermal crystallization. The Ozawa theory was also used to analyze the primary stage of non-isothermal crystallization. The Avrami exponents n were evaluated to be in the range of 2-3 for isothermal crystallization, and 3-4 for non-isothermal crystallization. The Ozawa exponents m were evaluated to be in the range of 1-3 for non-isothermal crystallization in the range of 135-155 °C. The crystallization activation energy was calculated to be −78.8 kJ/mol and −94.5 kJ/mol, respectively, for the isothermal and non-isothermal crystallization processes by the Arrhenius’ formula and the Kissinger’s methods.     

Crystallization kinetics of PHB/PVAc blends using time resolved dielectric spectroscopy

Crystallization kinetics of poly(hydroxy butyrate), PHB, and its blends with poly(vinyl acetate), PVAc, have been thoroughly investigated using broadband dielectric technique over a wide range of frequencies (10⁻²-10⁵ Hz) as functions of crystallization temperature and blend composition. The dielectric strength of the amorphous segments, Δε, which is directly proportional to the volume fraction of the mobile amorphous phase in the blend decreases exponentially with increasing the crystallization time. However, on the other hand, the dielectric strength of the rigid amorphous segments, Δε_α′, which is related to the percentage of crystallinity in the blend increases dramatically with increasing crystallization time. A great variation in the dynamical constraints of relaxation segments with increasing crystallization time has been observed as a result of different environments, which would lead to a variation in the consistency of the cooperative regions. The value of the dielectric constant, ε′, decreases dramatically with increasing crystallization time, after that it reaches an equilibrium value at the end of the crystallization process. This dramatic decrease in the value of ε′ as a result of crystallization at a given crystallization temperature, was taken as an accurate evaluation for the amount of the amorphous phase that has undergone crystallization considering the theoretical approach of Avrami. The Avrami exponent, n, was found to be crystallization temperature, T_c, independent (n ∼ 3) indicating a three-dimensional crystal growth for pure PHB. The crystallization rate constant, k, increases greatly with increasing T_c due to the high crystallization rate. In the blend the value of n was found to be concentration dependent (n ∼ 1.8-3.2). The different values of n indicate that the shapes of the growing crystals are affected by blend concentration. For n ∼ 1.8, the crystals can either grow sporadically as rods or instantaneously as disks, while for n ∼ 3 a three-dimensional crystal growth takes place.     

Unusual change in molecular weight of polyhydroxyalkanoate (PHA) during cultivation of PHA-accumulating Escherichia coli

This study aimed to investigate the factors affecting molecular weight of poly[(R)-3-hydroxybutyrate] [P(3HB)] when polyhydroxyalkanoate (PHA) synthase (PhaRC_Bsp) from Bacillus sp. INT005 was used for P(3HB) synthesis in Escherichia coli JM109. It was found that the molecular weight of P(3HB) decreased with time in mid- and late-phase of culture and was strongly affected by culture temperature. At 37 °C culture temperature, the molecular weight of P(3HB) rapidly decreased from 4.4 × 10⁵ to 4.8 × 10⁴ with culture time, whereas it was almost unchanged at 25 °C. Kinetic analysis suggested that the decrease in molecular weight of P(3HB) was due to random scission of the polymer chain. The decrease in molecular weight of P(3HB) was not observed when PHA synthases other than PhaRC_Bsp were expressed. This study sheds light on the unique behaviour in molecular weight change of P(3HB) that is synthesized by E. coli expressing PhaRC_Bsp.     

Formation of porous poly(vinylidene fluoride) membranes with symmetric or asymmetric morphology by immersion precipitation in the water/TEP/PVDF system

The phase equilibrium boundaries of the membrane forming system, water/triethyl phosphate (TEP)/PVDF, at 25 °C were determined experimentally using cloud-point and equilibrium absorption methods. Based on the phase diagram, appropriate dope and bath compositions were selected to prepare microporous membranes by means of the isothermal immersion-precipitation technique. As a metastable casting dope with respect to crystallization was adopted, the formed membranes exhibited a uniform cross-section composed of interlocked crystal elements coexisting with the network of continuous pores, as was revealed by high resolution FESEM imaging. Morphologies of the membranes’ top surfaces were found to depend heavily on the bath strength, which was controlled by the TEP content. By changing the bath gradually from pure water to 70% TEP, the top surface evolved from a dense skin (asymmetric membrane) to a totally porous morphology (symmetric membrane). Wide angle X-ray diffraction analysis indicated that PVDF crystallized into α-type structure for all of the synthesized membranes. The crystallinity as determined from diffraction peak deconvolution was ≈65%, which value was confirmed by Differential Scanning Calorimetry (DSC). The obtained thermograms also showed a similar melting peak temperature (T_m ≈ 169 °C) for all membranes. Furthermore, water fluxes and tensile strengths of the membranes were measured. The results were found to correlate with the morphologies of the membranes.     

Synthesis, structural and spectroscopic properties of a new Schiff base ligand N,N′-bis(trifluoromethylbenzylidene)ethylenediamine

The Schiff base compound, N,N′-bis(trifluoromethylbenzylidene)ethylenediamine (C₁₈H₁₄F₆N₂) (1), CF₃C₆H₄CHNCH₂CH₂NCHC₆H₄CF₃ has been synthesized by adding a solution of ethylenediammine (en), 0.1 mmol in chloroform to 4-(trifluoromethyl)-benzaldehyde, CF₃C₆H₄CHO (0.2 mmol) and the product was crystallized in ethanol with the mp, 109.2 °C and 75% yield. The crystal structure was investigated by a single-crystal X-ray diffraction study at 150 K. The compound crystallizes in monoclinic space group, P2₁/c with a = 9.295(3), b = 5.976(5), c = 15.204(9) Å and α = 90°, β = 96.56(5)° and γ = 90°. The crystal structure is stabilized by intermolecular CH · · · F hydrogen bonds. The asymmetric unit contains only one-half of the molecule related to the center of symmetry coinciding with C(1)-C(1′) and as a whole, the title molecule is in the staggered conformation. The phenyl rings and the CN imine bonds are co-planar. The infrared spectrum showed a sharp peak at 1640 cm⁻¹ which is typical of the conjugated CN stretching and strong peaks at 800-1400 cm⁻¹ regions are due to the C-C and C-H stretching modes. Electronic absorption spectra exhibits strong absorption in the UV region (240 nm wavelength) which have been ascribed to , and electronic transitions. The ¹H NMR spectra showed three distinct peaks at 2.5, 7.8 and 8.5 ppm which are assigned based on the splitting of resonance signals and are clearly confirmed by the X-ray molecular structure. The aromatic protons appear at about 7.8 ppm and the imine protons at 8.5 ppm. The sharp singlet at about 3.95 ppm is assigned to the CH₂-CH₂ protons. Mass spectra of the titled compound showed the molecular ion peak at m/e 372 (M⁺), and fragments at m/e 353 (M-F), 342 (M-2F), 200 (M-CF₃C₆H₄CHN), 186 (M-CF₃C₆H₄CHNCH₂).     

Deformation investigation on iPP/SiO2 composites: Influence of stretching temperature and particle size on morphology evolution and crystalline structure of thin films

 In the present work, structure changes during stretching of isotactic polypropylene (emPP) and emPP/silicon dioxide (SiO₂) composites have been investigated systematically. The α-form crystal structure of both iPP and emPP/SiO₂ composites is destroyed and transforms into the mesophase as the samples are stretched at a low temperature (35℃), while stretching at high temperatures (90℃ and 120℃) can restrain the appearance of defects and keep the perfection of crystal structure. FTIR results reveal that the stretching temperatures show no obvious difference of the effect on the orientation of pure iPP, however, the orientation of emPP/SiO₂ composites is greatly changed by the tensile temperature. In the case of micron-sized SiO₂ particles (average particle diameter d>1 μm), the orientation of the composites is lower than that of pure iPP at all stretching temperatures. The above results suggest that the stretching temperature and the SiO₂ particle size have great influence on the structure variation and orientation behavior of emPP/SiO₂ composites.     

Crystallization kinetics of poly(glycolic acid-alt-6-aminohexanoic acid)

The crystallization behavior of a new regular poly(ester amide) constituted by glycolic acid and 6-aminohexanoic acid units under both isothermal and non-isothermal conditions is studied. Differential scanning calorimetry (DSC) is used to monitor bulk crystallization, and subsequently Avrami and Ozawa analyses are applied. A three-dimensional spherulitic growth from heterogeneous nuclei is deduced for isothermal crystallization, whereas higher exponents are obtained for non-isothermal crystallization when an Avrami equation is applied. However, modifications of the Ozawa methodology indicate a crystallization mechanism similar to that of the isothermal process.The maximum crystallization rate is deduced to take place at a temperature close to 91 °C by considering experimental data and theoretical equations with adjusted parameters. The equilibrium melting temperature is determined to be 168 °C by the characteristic Hoffman-Weeks plot. One crystallization regime is detected by using the Lauritzen-Hoffman kinetic theory for isothermal crystallization and also with an isoconversional method applied for non-isothermal crystallization. Activation energy of molecular transport and nucleation constant are close to 1500 cal/mol and 1.81 × 10⁵ K², respectively. Crystal morphology, nucleation, and spherulitic growth rates are also investigated with hot-stage optical microscopy (HSOM).     

Crystallization and melting behaviors of polystyrene-b-poly(ethylene-co-butene) block copolymers

Non-isothermal and isothermal crystallization behaviors of polystyrene-b-poly(ethylene-co-butene) (PSt-b-PEB) block copolymers with different compositions and chain lengths were investigated by differential scanning calorimetry (DSC). The results show that crystallization of PEB block is strongly dependent on the composition. Crystallization temperature (T_c), melting temperature (T_m) and fusion enthalpy (ΔH_f) increase rapidly with PEB volume fraction (V_E) for block copolymers with V_E below 50%, but there is little change when PEB block becomes the major component. Glass transition temperature (T_g) of the PSt block and order-disorder transition temperature (T_ODT) of block copolymers also have a weak effect. The isothermal crystallization kinetics results show that Avrami exponent (n) was strongly dependent on the composition and crystallization temperature. For the block copolymers with V_E below 38.7 vol%, the values of n vary between 0.9 and 1.3, indicating that crystallization is confined. For the PSt-b-PEB block copolymers with V_E higher than 50%, fractionated crystallization behavior is usually observed. A two-step isothermal crystallization procedure is applied to these block copolymers. It is found that breakout crystallization occurs at higher T_c, but confined at lower T_c. Two overlapped melting peaks are observed for the block copolymers with fractionated crystallization behavior after two-step crystallization, and only the higher melting peak corresponding to breakout crystallization can be used to derive equilibrium melting temperature.     

Theoretical studies of d-d and d-π-d magnetic interactions in (EDT-TTFVO)2FeBr4 crystals

The effective exchange integrals (J(HB)) of the Heisenberg spin model have been evaluated by using the ab initio MO and based on Hartree-Fock (HF) and density functional theory (DFT) for organic magnetic metals, the (EDT-TTFVO)₂FeBr₄ crystal based on the X-ray crystallographic structures at 113 K. In order to study the magnetic properties, we proposed some of the pairs, where the direct (d-d) and indirect (d-π-d) magnetic couplings between Fe(III) d-spins (S = 5/2) without/with π-dimer spins (S = 1/2) were calculated, respectively. The effective exchange integrals were evaluated by using UB3LYP method, and principal J values were 0.5, −0.1 and 0.4 K. From these results, it is found that there were three dimensional spin arrangements of Fe(III) d-spins. The Quantum Monte Carlo (QMC) simulations had been carried out with our calculated J values to evaluate the magnetic susceptibility for this molecular crystal, reproducing the experimental tendency.     

Electronic states of 1,4-bis(phenylethynyl)benzene: A synchrotron radiation linear dichroism investigation

The electronic transitions of 1,4-bis(phenylethynyl)benzene (BPEB) were investigated by UV synchrotron radiation linear dichroism (SRLD) spectroscopy in the range 25,000-58,000 cm⁻¹ (400-170 nm) on molecular samples aligned in stretched polyethylene. The investigation was supported by variable temperature spectroscopy and by quantum chemical calculations in the LCOAO and TD-DFT models. The molecular alignment of BPEB in stretched polyethylene was found to be remarkably efficient, leading to an orientation factor equal to 0.95 for the long molecular axis. The observed band shape depended strongly on the degree of stretching and on temperature. The combined experimental and theoretical evidence leads to the characterization of several previously unobserved transitions and supports the assumption that BPEB adopts a nearly planar conformation in stretched polyethylene.     

Engineering of pha operon on Cupriavidus necator chromosome for efficient biosynthesis of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) from vegetable oil

Cupriavidus necator H16C_Ac, previously constructed for production of poly((R)-3-hydroxybutyrate-co-(R)-3-hydroxyhexanoate) [P(3HB-co-3HHx)] from soybean oil, was further engineered aiming to increase 3HHx composition in the copolyester. PHA synthase gene derived from Aeromonas caviae on the H16C_Ac chromosome was replaced by a gene encoding the N149S/D171G mutant and this recombination enhanced PHA productivity as well as slightly increased 3HHx composition. Manipulation of phaA_Cn locus partially reduced the amount of 3HB unit concomitantly with relative increase of 3HHx composition, whereas deletion of phaB1_Cn resulted in drastic decline of 3HB unit in P(3HB-co-3HHx). Insertion of phaJ_Ac encoding (R)-specific enoyl-CoA hydratase from A. caviae into pha operon significantly enlarged 3HHx fraction without negative effects on the cell growth and polyester accumulation. Consequently, efficient production of P(3HB-co-3HHx) with 3HHx composition of 5.7-9.9 mol% was successfully achieved from soybean oil by the engineered strains.     

An overview on 12-polyurethane: Synthesis, structure and crystallization

The knowledge on linear aliphatic polyurethanes n-PUR has increased significantly due to a series of works made in these last years and published in recent literature. An overview of 12-polyurethane (12-PUR) embracing its synthesis, thermal properties, crystal structure and crystallization is given in this paper. The purpose is to provide a representative example able to reflect comprehensively the state of the art reached for the whole family. The synthesis of 12-PUR was accomplished in good yield and with acceptable molecular weight from 12-amino-1-dodecanol by applying a two-step method without isolation of the isocyanate alcohol precursor. 12-PUR is a semicrystalline polymer with an equilibrium melting temperature of 157 °C. It adopts a layered crystal structure similar to the α-form of nylons with chains in fully-extended conformation and arranged in hydrogen-bonded sheets in the antiparallel mode. This structure is thermally stable up to melting and is unable to undergo Brill transition. 12-PUR crystallized from dilute solution affording well-shaped lamellar crystals with a thickness of 8-9 nm and from the melt yielding either banded or fibrillar spherulitic textures displaying negative birefringence. Isothermal crystallization of 12-PUR from the melt took place with heterogeneous nucleation, while both crystallization rate and the finally attained crystallinity degree were highly depending on crystallization temperature.     

Degradation behaviors of polyester monolayers at the air/water interface: Alkaline and enzymatic degradations

The degradation kinetics of Langmuir monolayer films of a series of biodegradable polyesters has been studied to investigate the effect of degradation medium, alkalinity and enzymes. The degradation behavior of polyester monolayers strongly depended on both degradation medium and surface pressure. As the surface pressure was increased, the degradation rates of poly(l-lactide) (PLLA) and poly[(R)-3-hydroxybutyrate] (P(3HB)) increased in both degradation media. When monolayers were exposed to an alkaline subphase, the degradation of PLLA monolayers occurred at relatively low surface pressures; the PLLA monolayers were hydrolyzed at pH 10.5 regardless of surface pressure, while the alkaline degradation of P(3HB) monolayer occurred over a constant surface pressure of 7 mN/m at pH 11.8. These results have been explained by the difference in hydrophilic/hydrophobic balance of the polymers; PLLA is more hydrophilic than P(3HB). In contrast, the enzymatic degradations of both polymer monolayers occurred at higher constant surface pressures than those of the alkaline treatment; 7 mN/m for PLLA and 10 mN/m for P(3HB). This behavior was attributed to the enzymes being much larger than the alkaline ions: the enzymes need a larger contact area with the submerged monolayers to be activated.