A convenient synthesis of l-ribose from d-fructose

An efficient method for the stereoselective synthesis of l-ribose was accomplished starting from commercially inexpensive d-fructose. The intermediates in the process can serve as versatile precursors for the preparation of l-nucleoside analogues.     

Racemization behavior of l,l-lactide during heating

To control the depolymerization process of poly(l-lactic acid) into l,l-lactide for feedstock recycling, the racemization of l,l-lactide as a post-depolymerization reaction was investigated. In the absence of a catalyst, the conversion to meso-lactide increased with increase in the heating temperature and time at a higher rate than the conversion into oligomers. The resulting high composition of meso-lactide suggests that the direct racemization of l,l-lactide had occurred in addition to the known racemization mechanism that occurs on the oligomer chains. In the presence of MgO, the oligomerization rapidly proceeded to reach an equilibrium state between monomers and oligomers. The equilibrium among l,l-, meso-, and d,d-lactides was found to be a convergent composition ratio l,l-:meso-:d,d-lactides = 1:1.22:0.99 (wt/wt/wt) after 120 min at 300 °C. This composition ratio also indicates that in addition to the known racemization reaction on the oligomer chains, direct racemization among the lactides is also a frequent occurrence.     

New low-molecular weight gelators based on l-valine and l-isoleucine with various terminal groups

New low-molecular weight gelators based on l-valine and l-isoleucine, which have various terminal groups such as ester, carboxyl, and carboxylate, function as a good organogelator that form an organogel in many organic solvents. In addition, the sodium salt compounds form not only organogels but also a hydrogel in the presence of a cationic surfactant.     

Synthesis of l,l-puromycin

l,l-Puromycin, a diastereomer of the natural peptidyl nucleoside antibiotic puromycin, has been synthesized from l-xylose in 13 steps.     

A general approach to l-tyrosine porphyrins

A novel and general approach has been developed to prepare l-tyrosine-containing porphyrins. The key intermediates, 2-tert-butoxycarbonylamino-3-(3-formyl-4-hexyloxy-phenyl)-propionic acid hexyl ester and 2-tert-butoxycarbonylamino-3-(3-formyl-4-methoxy-phenyl)-propionic acid methyl ester, were prepared by the Reimer-Tiemann reaction of Boc-protected l-tyrosine, which was followed by esterification and alkylation of the phenol hydroxide. A number of novel chiral l-tyrosine porphyrins were obtained from the reactions of 2-tert-butoxycarbonylamino-3-(3-formyl-4-alkoxy-phenyl)-propionic acid ester with different dipyrrolylmethanes and the reaction of 5-(4-trifluoromethylphenyl)pyrromethane afforded the highest yield. The tyrosine porphyrins could be readily deprotected to afford the corresponding diacid or diamine derivatives.     

New building blocks for peptide and depsipeptide synthesis: hexafluoroacetone protected l-homoisoserine and d,l-homoisocysteine derivatives

Efficient syntheses of l-homoisoserine and d,l-homoisocysteine derivatives starting from l-malic and d,l-thiomalic acid using hexafluoroacetone as protecting and activating agent are described. The new compounds are interesting building blocks for the preparation of non-natural peptides and depsipeptides as well as for the construction of new GABA derivatives.     

Intermolecular/interionic interactions in l-isoleucine-, l-proline-, and l-glutamine-aqueous electrolyte systems

Speed of sound and density values for ternary systems (amino acid + salt + water): l-isoleucine/l-proline/l-glutamine in aqueous solutions of 1.5 M KCl, 1 M KNO₃, and 0.5 M K₂SO₄ have been measured for several concentrations of amino acids at different temperatures (303.15, 308.15, 313.15, 318.15, and 323.15 K). Using speed of sound and density data, the thermodynamic parameters such as isentropic compressibility (κ_s), change in isentropic compressibility (Δκ_s) and relative change (Δκ_s/κ₀) in isentropic compressibility have been computed. The isentropic compressibility values decrease with increase in the amino acid concentration as well as with temperature. The decrease in κ_s values with increase in concentration of l-isoleucine/l-proline/l-glutamine in 1.5 M KCl, 1 M KNO₃, and 0.5 M K₂SO₄ has been ascribed to an increase in the number of incompressible zwitterions in solutions, and the formation of ‘zwitterions-ions’ and ‘zwitterions-water dipole’ entities in solutions. The decrease in κ_s values with increase in temperature has been attributed to the corresponding decrease of κ_relax (a relaxational part of compressibility), which is dominant over the corresponding increase of κ_∞ (an instantaneous part of compressibility). The trends of variation of Δκ_s and Δκ_s/κ₀ with variations in solute concentration and temperature have also been discussed in terms of solute-solute and solute-solvent intermolecular/interionic interactions operative in the systems.     

Stereoselective synthesis of new modified conformationally constrained l-tyrosine analogue with potential applications to SH2 domain ligands

This paper reports the stereoselective synthesis of a modified tricyclic tyrosine analogue 3, whose conformation is constrained by the covalent bonds and designed on the basis of X-ray and solution structures of SH2 domain and its natural peptide ligand. A Michael addition followed by an alkylation in high stereoselections, a Friedel-Crafts and a Mannich reaction-based cyclization served as the key steps in the synthesis.     

A highly efficient synthesis of unnatural l-sugars from d-ribose

A preparative and short synthesis of l-ribose and l-apiose was accomplished starting from d-ribose via stereoselective cis-dihydroxylation and C2-hydroxymethylation, respectively. These l-sugars can serve as versatile intermediates for the synthesis of l-nucleosides.     

An amperometric method for the determination of trace mercury(II) by formation of complexes with l-tyrosine

A selective and sensitive amperometric method of analysis has been developed for determination of the trace amounts of mercury in waters at a platinum electrode based on the effect of the presence of mercury ions on the current due to oxidation of l-tyrosine. A decrease of signal was observed due to the formation of a complex of tyrosine with the Hg(II) ion adsorbed on the electrode surface. Several parameters were varied, such as applied potential, pH and concentration of tyrosine. The calibration plot was linear in the range from 0.02 to 3 μmol l⁻¹ Hg(II) with r=0.997 and the detection limit (3σ) was 0.014 μmol l⁻¹; the relative standard deviation was 2.2%. The study of interferences from other metal ions revealed a good selectivity of this method towards mercury(II). The stoichiometry of the mercury-tyrosine complex was determined to be 1:2 and the formation constant 627±19. Formation of complexes with mercury ions was also demonstrated with several catechol compounds and other amino acids. The method was applied to the analysis of contaminated waters.     

One-pot inversion of d-mannono-1,4-lactone for the practical synthesis of l-ribose

l-Ribose was synthesized in a concise manner from d-mannono-1,4-lactone using one-pot inversion conditions. Treatment of d-mannono-1,4-lactone with piperidine, followed by mesylation-induced S_N2-type O-alkylation, afforded the desired one-pot inversion in an optimum yield, and the following straightforward transformations provided l-ribose in good yields.     

Synthesis of homochiral 2-C-perfluoroalkyl substituted d- and l-riboses

Homochiral 2-C-perfluoroalkyl substituted d- and l-riboses were synthesized via Barbier, Grignard and Ruppert type reactions. The influence of the size of the perfluoroalkyl groups, attached to C-2, on the furanose/pyranose as well as on the α-furanose/β-furanose and α-pyranose/β-pyranose ratio in solution was studied.     

Swelling and hydrolytic degradation of poly(d,l-lactic acid) in aqueous solutions

Low molecular weight poly(lactic acid) was synthesized by direct polycondensation of lactic acid. The oligomers were characterized by viscometry, light scattering, and gel permeation chromatography (GPC). The swelling behaviour of tablets made of the above polymer immersed in buffer solutions at 37 °C was studied. In the same experiments, the hydrolytic stability of d,l-PLA was assessed by measuring the weight loss after drying the tablets. In order to inhibit any degradation due to bacteria, formaldehyde was added in the solution as biostatic factor. The effect of an incorporated drug on the swelling behaviour of d,l-PLA tablets was also considered. It was found that the incorporation of drug in d,l-PLA tablets increases their swelling index, probably due to the creation of additional porosity in the specimens or other interaction between drug and polymeric matrix.     

Novel synthesis of 5-thio-hexopyranoside: preparation of 5-thio-d- and l-glucose and 1,6-anhydro-5-thio-l- and d-altrose

Asymmetric synthesis of both d- and l-isomers of 5-thioglucose and 1,6-anhydro-5-thioaltrose are described. The key intermediates, l- and d-threose diethylacetal derivatives, were derived by chemical transformation from d-xylose or d-arabinose and by Sharpless asymmetric dihydroxylation from γ-hydroxycrotylaldehyde diethylacetal. They transformed to γ-thiiranyl diethylacetal via trans-2,3-epoxy alcohol in seven steps. Acetic acid-promoted cyclization of γ-thiiranyl diethylacetal gave 5-thiopyranoside. Removal of the protected groups under the acidic conditions afforded 5-thio-d- and l-glucose and 1,6-anhydro-5-thio-l- and d-altrose, respectively.     

Amperometric simultaneous sensing system for d-glucose and l-lactate based on enzyme-modified bilayer electrodes

An amperometric biosensor system which uses screen-printed electrodes to simultaneously detect d-glucose and l-lactate has been developed and applied for simple and rapid determination of d-glucose and l-lactate levels in lactic fermenting beverages. The system was constructed from three-dimensionally layered electrodes. Taking into consideration the effects of easily oxidized substances contained in the samples, ferricyanide ions, which are electrochemically oxidized at a lower voltage, were chosen as a mediator. A linear relationship between steady-state current and concentration was found over a range of 1-100 mM (d-glucose) and 1-50 mM (l-lactate); the variation coefficients were 1.43% (n = 10) and 3.50% (n = 10) for the d-glucose and l-lactate sensors, respectively. When applied to lactic fermenting beverages, there was good agreement between the results obtained by the proposed sensing system and those obtained by the HPLC method. Using the proposed method, assays were completed within 5 min.     

Hydration of l-tyrosine in aqueous medium. An experimental and theoretical study by mixed quantum mechanical/molecular mechanics methods

Quantum mechanical/molecular mechanics (QM/MM) calculations were carried out in order to study the theoretical structures of l-tyrosine in both gas phase and in aqueous solution and observe the changes that occur on the structural and vibrational properties in two phases. Therefore, the molecule was characterized by infrared and Raman spectroscopy in solid phase and aqueous solution. Optimized geometries and relative stabilities for the zwitterion l-tyrosine derivatives have been calculated taking into account the solvent effects by using the self-consistent reaction field (SCRF) theory. For a complete assignment of the IR and Raman spectra of l-tyrosine in solid and aqueous solution phases, density functional theory (DFT) calculations were combined with Pulay's scaled quantum mechanical force field (SQMFF) methodology in order to fit the theoretical wavenumber values to the experimental ones. A good agreement between theoretical and available experimental results is found.     

Syntheses of [F]5-fluoro-3-nitro-l-tyrosine

The detection of 3-nitro-l-tyrosine has been used as a biomarker of “reactive nitrogen species” in biological matrices and has been an ongoing challenge in analytical chemistry. In this work, fluorine-18 labelled 5-fluoro-3-nitro-l-tyrosine (FNT) was synthesized as a potential radiotracer to probe the biological fate of 3-nitro-l-tyrosine. The synthesis of []FNT was carried out by reaction of []3-fluoro-l-tyrosine with NaNO₃ in TFA solvent for 5 min at 4 °C. The radiochemical yield (RCY) of []FNT was 96±2% and []3-fluoro-l-tyrosine, was 29±1%, relative to []3-fluoro-l-tyrosine and []F₂, respectively. The syntheses of []FNT were also accomplished by direct fluorination of 3-nitro-l-tyrosine with []F₂ and by nitration of l-tyrosine with NaNO₃, followed by fluorination, in TFA (4 °C) or anhydrous HF (−65 °C) solvent. The latter two synthetic routes produced []FNT in 13.5±1.5% RCY, within 1 h. Products were characterized by use of , and NMR spectroscopy and mass spectrometry.     

Microbial screening in hydroxylation of l-proline

Microbial screening of 250 wild type strains resulted in identification of five strains with the activity of prolyl hydroxylase. All five strains hydroxylated regioselectively and enantioselectively l-proline into 4(R)-trans-hydroxy-l-proline 1. The best conversions were obtained with a wild type of Aeromonas caviae. 3-Hydroxylase activity was not detected.     

Characterization and release of triptolide-loaded poly (d,l-lactic acid) nanoparticles

Triptolide (TP), which has immunosuppressive effect, anti-neoplastic activity, anti-fertility function and severe toxicities on digestive, urogenital, blood circulatory system, was used as a model drug in this study. TP-loaded poly (d,l-lactic acid) (PLA) nanoparticles were prepared by the modified spontaneous emulsification solvent diffusion method (modified-SESD method). Dynamic light scattering system (DLS), transmission electron microscope (TEM), atomic force microscopy (AFM), differential scanning calorimetry (DSC), X-ray powder diffractometry and Fourier transform infra-red spectroscopy (FT-IR) were employed to characterize the nanoparticles fabricated for size and size distribution, surface morphology, the physical state of drug in nanoparticles, and the interaction between the drug and polymer. Encapsulation efficiency (EE) and the in vitro release of TP in nanoparticles were measured by the reverse phase high-performance liquid chromatography (RP-HPLC). The produced nanoparticles exhibited a narrow size distribution with a mean size of approximately 150 nm and polydispersity index of 0.088. The morphology of the nanoparticles exhibited a fine spherical shape with smooth surfaces without aggregation or adhesion. TP-entrapped in nanoparticles was found in the form of amorphous or semicrystalline. It was found that a weak interaction existed between the drug and polymer. In all experiments, more than 65% of EE were obtained. The in vitro release profile of TP from nanoparticles exhibited a typical biphasic release phenomenon, namely initial burst release and consequently sustained release. In this case, the particle size played an important role for the drug release. The modified-SESD method was a potential and advantage method to produce an ideal polymer nanoparticles for drug delivery system (DDS).