Design of a high-sensitivity negative ion source time-of-flight mass analyzer assembly created by cylindrical electrodes with a common axis

The new design incorporates the negative ion source and the mass analyzer, both constructed from cylindrical electrodes. The ion source is formed by three gridded cylindrical electrodes: a pulsed grid, the intermediate grid and the final accelerating grid. During a first time lapse, the electrons penetrate through the pulsed grid into the retarding field between this grid and the intermediate grid. The electrons are turning at some depth inside this intergrid space, where the attachment to neutral molecules most probably occurs. Next, the pulsed grid becoming strongly negative and ions are extracted towards the final acceleration grid. The ions from the cylindrical surface where they were created concentrate on the common axis of the electrodes (lateral focusing). The source lateral and time focus are coincident. A cylindrical electrostatic mirror is fitted to the source. The design, with a single stage, ensures also lateral focusing of the ions diverging from the common axis of the electrodes. The mirror electric and geometric parameters were selected to ensure both lateral and time focusing on the final detector with subsequent high luminosity. The basic parameters of the specific negative ion source time-of-flight mass analyzer design proposed here, are ion source final acceleration, intermediate, pulsed cylindrical grid radii 10, 20 and 30 mm, respectively, electrostatic mirror earthed grid and ion turning points surface radii 0.6 and 0.8 m, respectively. Ion packet smearing by the ion energy spread (resulting from the initial electron energy spread as electrons are turning at different depths inside the ionization region, from the moment when ions were created, being accelerated towards the pulsed grid during ionization) and by the turnaround time inside the cylindrical field was accounted for. Maintaining very high sensitivity, a resolution of the order of 100 is expected.     

A pulsed ion deflection system for background reduction in 252CF-plasma desorption mass spectrometry

The use of an electrostatic particle guide (EPG) for background reduction in a time-of-flight mass spectrometer is described. Operating with reverse polarity, the EPG deflects ions radially from the beam axis, separating the ionic and neutral components of the beam. Use of the deflection EPG in a synchronized pulsed mode with a barrier disk aligned in the center of the beam axis eliminates up to 80% of the spectral background in the molecular ion region of an insulin spectrum obtained by ²⁵²Cf-plasma desorption mass spectrometry. The background eliminated is due to the neutral products of metastable fragmentation and to uncorrelated events. Although peak intensities are reduced when the pulsed deflection EPG system is used, the reduction in background achieved is greater, resulting in an overall improvement in peak-to-background ratios of up to a factor of three. A new large-area stop detector designed for use with the pulsed deflection EPG is described. The new hybrid detector, which utilizes the combination of a large (75-mm active diameter) microchannel plate (MCP) and a scintillation detector, provides greater sensitivity for high-mass ions than a conventional MCP chevron detector.     

Detection of negative ions in glow discharge mass spectrometry for analysis of solid specimens

A new method is presented for elemental and molecular analysis of halogen-containing samples by glow discharge time-of-flight mass spectrometry, consisting of detection of negative ions from a pulsed RF glow discharge in argon. Analyte signals are mainly extracted from the afterglow regime of the discharge, where the cross section for electron attachment increases. The formation of negative ions from sputtering of metals and metal oxides is compared with that for positive ions. It is shown that the negative ion signals of F^? and TaO₂F^? are enhanced relative to positive ion signals and can be used to study the distribution of a tantalum fluoride layer within the anodized tantala layer. Further, comparison is made with data obtained using glow-discharge optical emission spectroscopy, where elemental fluorine can only be detected using a neon plasma. The ionization mechanisms responsible for the formation of negative ions in glow discharge time-of-flight mass spectrometry are briefly discussed.     

Laser-induced desorption of proteins

Laser-induced desorption mass spectrometry has been applied to a number of proteins in the mass range 5000-150,000 u. The beam from an excimer-laser-pumped dye-laser at 266 nm has been focused to a spot of about 50 microns in diameter with irradiances in the 10(7) W/cm2 region. A linear time-of-flight mass spectrometer has been used for mass spectrometric measurements, where positive and negative secondary ions of large proteins have been studied. The effect of different experimental parameters on the protein ion-signal intensities are discussed.     

Strategies for the analysis of poly(methacrylic acid) by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

We evaluated several aqueous-based sample preparation protocols for the analysis of poly(methacrylic acid) (PMAA) by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS). The sample contained a pentaerythritol tetra(3-mercaptopropionate) end-group, and was characterized in positive and negative ion modes using 2,5-dihydroxybenzoic acid (DHB) and 2,4,6-trihydroxyacetophenone (THAP) matrices. The major series observed were the [M + Na](+) species, in positive ion mode, and the [M - H](-) species, in negative ion mode. The performance of DHB and THAP matrices was comparable in positive ion mode, but THAP outperformed DHB in negative ion mode. The use of ion-exchange beads (IXB) benefited the analysis, while the addition of sodium acetate (NaOAc) or trifluoroacetic acid (TFA) proved disadvantageous in positive ion mode.     

Analysis of various organic and organometallic compounds using nanostructure-assisted laser desorption/ionization time-of-flight mass spectrometry (NALDI-TOFMS)

Nanostructure-assisted laser desorption/ionization time-of-flight mass spectrometry (NALDI-TOFMS) has been developed recently as a matrix-free/surface-assisted alternative to matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS). The NALDI surface of silicon nanowires is already very effective for the analysis of small to medium sized, polar organic molecules in positive ion mode. The current study examined this technology for the analysis of several nonpolar organic, organometallic, and ionic compounds in positive ion mode, as well as a fluorinated compound and various acids in negative ion mode. NALDI data are compared and contrasted with MALDI data for the same compounds, and the higher sensitivity of NALDI is highlighted by the successful characterization of two porphyrins for a sample amount of 10 amol per spot.     

宽离子能量检测范围垂直引入反射式飞行时间质谱仪的研制

本实验室研制了国内首台宽离子能量检测范围飞行时间质谱仪。仪器采用紧凑式电子轰击源设计,配合离子透镜系统有效的调制离子流,飞行时间质量分析器采用了离子垂直引入式,双场加速和双场反射以及大尺寸MCP检测装置设计。仪器单离子信号半峰宽约2 ns,仪器分辨率优于1600FWHM,检测实际样品质量范围为1~127 amu(仪器理论质量检测上限优于800 amu),可检测离子能量范围优于2个数量级(3~140 eV)。若该TOF质量分析器与短瞬高压脉冲放电离子源耦合联用,可广泛应用于高能离子束的快速检测,如真空阴极放电对制备薄膜、离子注入材料的表征,导电材料的离子电荷态分布以及离子扩散速度的测定等。     

The Orbitrap mass analyzer with direct ion injection interfaced to a laser desorption/ionization ion source

The results of a study on interfacing an Orbitrap mass analyzer with direct ion injection to a surface assisted laser desorption/ionization (SALDI) ion source are presented. Osmium complexes with 8-mercaptoquinoline were studied. Titanium oxide thin films prepared by electron beam evaporation were found an effective emitter of the ions of the test complexes. It was demonstrated that interfacing the Orbitrap mass analyzer to a SALDI source can significantly improve the analytical performance of this method in comparison to a typical combination of SALDI/time-of-flight mass spectrometer.     

纳秒激光电离产生Kr17+的研究

Up to Kr17 + multicharged krypton ions have been observed in time-of-flight mass spectrum by a 25 ns Nd-YAG 1. 064 μm laser at laser intensity about 1012 W/ cm2 . Experimental results indicate that the multicharged ions appear only when the laser interacts with the middle part of the pulsed beam,and the intensities of the multicharged ions increase dramatically by increasing the backing pressure of Kr gas,which indicates that the clusters in the beam is essential to the production of multicharged ions. From the experimental results,it is concluded that the cluster is ionized via multiphoton ionization and forms a nanoplasma ball,which can absorb the laser resonantly to further ionize the single charge ion to the high charge state.     

Matrix-assisted filament desorption/ionization mass spectrometry

We describe an improved sample preparation method for pulsed filament desorption–ionization mass spectrometry. Samples were deposited in the presence of an excess of liquid or solid matrices. Especially with liquid matrices such as glycerol, this allowed stable and reproducible ion production for a variety of compounds, including biomolecules and synthetic polymers. Substances with molecular weights up to 3000 Da could be desorbed, ionized, and detected by time-of-flight mass spectrometry.     

Factors that influence the observed fast fragmentation of peptides in matrix-assisted laser desorption

Fragmentation processes that occur very early during matrix-assisted laser desorption ionization (MALDI) of peptides are examined by utilization of delayed pulsed ion extraction with a linear time-of-flight mass spectrometer. The oxidized B chain of bovine insulin (MW=3495. 95 u), which produces a wide range of fragment ions, is utilized as a probe to examine the effects of several experimental parameters on this process. Experimental evidence suggests that this MALDI process is not prompt fragmentation and involves metastable ion decay that is quite different from that which is observed with postsource decay experiments. This conclusion is based upon the significant differences observed in the fragmentation products produced by the two techniques. This metastable ion decay process also appears to be over within the minimum pulse delay period (320 ns) that is possible with the current pulsed ion extraction hardware. These two observations suggest that either different activation processes are involved in the two techniques or that the much different time frame of the methods influences the observed ion decay pathways. This fast MALDI metastable ion fragmentation also is shown to be influenced by both the MALDI matrix and the laser fluence.     

Time-of-flight mass spectrometric analysis of ion formation in hypervelocity impact of organic polymer microspheres: comparison with secondary ion mass spectrometry, (252)Cf mass spectrometry and laser mass spectrometry

Unisized 1.6-microm polystyrene microspheres coated with PEDOT (polyethylene-dioxythiophene) were accelerated to speeds of 6-16 km/s and shot onto a silver target. Either positive or negative ions, both instantaneously formed by the impact process, have been analyzed by time-of-flight mass spectrometry (TOF). Apparently, the processes that control the formation of ions of either polarity depend on the impact velocity. Comparing the results with those of secondary ion mass spectrometry with primary ion energy in both the elastic and the inelastic ((252)Cf-MS) energy loss regimes, some reaction mechanisms of the polymer ions for different energy densities could be elucidated. Some aspects of ion formation are also related to those found in pulsed laser ion generation from these microspheres. This investigation was performed in order to further improve the method of analyzing the organic fraction of interstellar, interplanetary, and cometary dust particles impinging on the targets of the "CIDA" time-of-flight (TOF) mass spectrometers on-board the NASA comet missions "STARDUST" and "CONTOUR".     

On the use of single-photon ionization for inorganic surface analysis

Summary A general surface analysis method has been developed based on non-selective photoionization of sputtered or desorbed neutral atoms and molecules above the surface, followed by time-of-flight mass spectrometry. The approach, currently utilizes two main types of ionizing radiation and a variety of desorption probes. For photoionization, coherent untuned sources are used; an intense focused pulsed UV laser beam is used for non-resonant multiphoton ionization to give elemental and limited chemical information, usually used for inorganic analysis; a coherent VUV source is used for single-photon ionization at 118 nm (10.5 eV) produced by frequency tripling of 355 nm light from a Nd:YAG laser. This paper focuses on single-photon ionization for inorganic systems. The desorption probes used are ion, electron, and laser beams as well as thermal desorption. For depth profiling, ion beams are specifically used. Any focused desorption probe beam can provide lateral spatial resolution.     

Study of the mechanism of direct laser desorption/ionisation for some small organic molecules (M < 400 Daltons)

Aspects of direct laser desorption/ionisation have been studied for three molecules, aminotriazole (positive ion), dinoterb and ioxynil (negative ion). The samples are deposited on metallic substrates, and a nitrogen laser is used for desorption/ionisation; ion yields are measured with a time-of-flight mass spectrometer. Previous work had shown that ion yields can strongly vary from one substrate to another, and that this variation does not reflect the (calculated) metal surface temperatures. New results obtained in this work indicate that the desorption/ionisation mechanism is linked to the physical state of the substrate surface. Copyright 1999 John Wiley & Sons, Ltd.     

Temperature-programmed ESDIAD/TOF system as a new technique for characterization of adsorbed molecules and reaction intermediates

A temperature-programmed (TP-) electron stimulated desorption ion angular distribution (ESDIAD)/time-of-flight (TOF) system was developed to monitor changes in adsorbed layers in real time. This system can measure ESDIAD images and TOF spectra of desorbing ions stimulated by pulsed electron beam in temperature programmed surface processes. The coadsorption layers of CO and ammonia, the coadsorption layers of CO and methylamine, and the coadsorption layer of CO and acetylene on Ru(001), which were previously studied by our group using LEED, TPD and HREELS, have been observed by this system. The change in configuration of admolecules, the change in site occupation and the thermal evolution of adspecies can be monitored.     

富勒烯负离子的自聚行为

C6。可以说是迄今发现的具有最美妙对称性的分子——60个碳原子均位于完全等价的几何位置上，而且由于形成了覆盖整个‘咏’面的大。键，结构非常稳定．最近一系列实验发现，C。。在激光的作用下还能进一步聚合饲．我们在实验中首次发现了C。。在脉冲激光溅射下自聚成的负离子，并对实验记录的质谱作了分析．1实验实验在自制的激光等离子体源飞行时间质谱计问上进行．C。。粉末压紧后以n面胶固定在样品架上．实验所用的激光波长532urn，脉宽7us．会聚后作用于样品的激光功率密度在10’－10‘W·cm－’之间．激光产生的等离子体中的正负离…     

Negative ion laser desorption ionization time-of-flight mass spectrometry of nitrated polycyclic aromatic hydrocarbons

Nitrated polycyclic aromatic hydrocarbons (nitro-PAHs) are widespread environmental pollutants that are generated by incomplete combustion and by atmospheric transformation of polycyclic aromatic hydrocarbons (PAHs). Many nitro-PAH compounds are potent genotoxins and some are direct acting mutagens. Detection of nitro-PAHs in aerosols is complicated by small sample sizes and nitro-PAH abundances that are 1–2 orders of magnitude less than analogous unsubstituted PAHs. Selective detection of several nitro-PAHs by using laser desorption ionization time-of-flight mass spectrometry in negative ion mode has been achieved. Desorption and ionization of nitro-PAHs were effected by using pulsed UV radiation at 266 and 213 ran. Intense molecular anions were observed in addition to fragments identified as CN^? and NO ₂ ^? , which were characteristic indicators of the presence of nitro-PAHs. Selective detection of nitro-PAHs in negative ion mode was demonstrated in the analysis of a diesel particulate sample.     

Matrix-assisted laser desorption ionization with a magnetic mass spectrometer.

Matrix-assisted laser desorption ionization has been carried out with a high mass double-focusing magnetic mass spectrometer. The pulsed ion signal, generated by irradiation of the sample (substance P, ubiquitin, and cytochrome c) embedded in 2,5-dihydroxybenzoic acid with a XeF excimer laser (353 nm, 12 ns pulse, 10-160 Hz), was recorded with an integrating array detector. Good resolution of 2600 (full width at half maximum) and high sensitivity (a few pmol) were obtained. The loss of small neutral fragments was observed, supporting the notion that the peak broadening observed in the time-of-flight mass spectrometers commonly used for this ionization mode is due to such metastable decomposition.     

Ion formation mechanism in laser desorption ionization of individual nanoparticles

Covariance mapping is used to study ion formation mechanisms in laser desorption ionization of individual 50 or 220 nm diameter particles having compositions similar to ambient aerosol. Single particle mass spectra are found to vary substantially from particle to particle. This variation is systematic--the energetically preferred ions (e.g., lowest ionization energy, highest electron affinity) are positively correlated with each other and negatively correlated with less preferred ions. For the compositions studied, the average positive ion yield is two to five times greater than the negative ion yield, indicating that free electrons are the main negatively charged species. For many particles, typically 20% to 40% of those analyzed, only positive ions are detected. Smaller particles give fewer negative ions, presumably because the plume is less dense and electron capture is less likely. The results suggest that ion formation occurs by a two stage process. In the first stage, photoionization of laser desorbed neutrals gives cations and free electrons. In the second stage, collisions in the plume cause electron capture and competitive charge transfer. When the particle ablates in a manner giving a dense plume with many collisions, the energetically preferred positive and negative ions are dominant. When the particle ablates in a manner giving a less dense plume with fewer collisions, the less preferred ions are able to survive and the energetically preferred ions constitute a lower fraction of the total ion signal. Systematic particle to particle variations of relative signal intensities can complicate ambient particle classification efforts by spreading a single particle composition over several classes.     

Characterization of phosphopeptides from protein digests using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry and nanoelectrospray quadrupole time-of-flight mass spectrometry

A two-step mass spectrometric method for characterization of phosphopeptides from peptide mixtures is presented. In the first step, phosphopeptide candidates were identified by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) based on their higher relative intensities in negative ion MALDI spectra than in positive ion MALDI spectra. The detection limit for this step was found to be 18 femtomoles or lower in the case of unfractionated in-solution digests of a model phosphoprotein, beta-casein. In the second step, nanoelectrospray tandem mass (nES-MS/MS) spectra of doubly or triply charged precursor ions of these candidate phosphopeptides were obtained using a quadrupole time-of-flight (Q-TOF) mass spectrometer. This step provided information about the phosphorylated residues, and ruled out nonphosphorylated candidates, for these peptides. After [(32)P] labeling and reverse-phase high-performance liquid chromatography (RP-HPLC) to simplify the mixtures and to monitor the efficiency of phosphopeptide identification, we used this method to identify multiple autophosphorylation sites on the PKR-like endoplasmic reticulum kinase (PERK), a recently discovered mammalian stress-response protein.