Flame retardant epoxy polymers based on all phosphorus-containing components

A phosphorus-containing epoxy resin, bis(3-t-butyl-4-glycidyloxyphenyl-2,4-di-t-butylphenyl)resorcinol diphosphate, was synthesized and subsequently cured with non-phosphorus containing amines, and/or novel phosphorus-containing aromatic or polyoxyalkylene amines. Chemical structures of these materials were characterized with FTIR, NMR, elemental analysis, and amine titration. The introduction of soft -P-O- linkage, polyoxyalkyene, or hard aromatic group into the backbones of the synthesized phosphorus-containing amines provides epoxy polymers with high phosphorus contents and tailored flexibility. Thermal analysis of differential scanning calorimeter and thermal gravimetric analysis (TGA) reveals that these resulted epoxy polymers possess moderate T_gs and thermal stability. Furthermore, high char yields in TGA analysis and high limited oxygen index values indicate that these phosphorus-containing epoxy polymers possess excellent flame retardant properties.     

有机磷系及石墨烯阻燃环氧树脂研究进展

环氧树脂作为一种优异的树脂基体,被广泛地应用于众多领域,但因其极易燃烧,所以常常需要对其进行阻燃处理。本文简要综述了近几年有机磷系化合物及石墨烯阻燃环氧树脂的研究进展,其中有机磷系化合物阻燃部分重点介绍了以阻燃剂中间体9,10-二氢-9-氧杂-10-磷杂菲-10-氧化物(DOPO)及其衍生物和聚磷酸铵(APP)为代表的含磷阻燃剂在环氧树脂中的阻燃机理和阻燃进展;同时也介绍了石墨烯及其衍生物在环氧树脂阻燃领域的最新研究进展,并对其发展前景进行了展望。     

含季戊四醇磷酸酯阻燃剂的合成与表征

采用1-氧代-4-羟甲基-2,6,7-三氧杂-1-磷杂双环[2.2.2]辛烷(PEPA)、三氯氧磷、双酚A和双酚S为反应物,合成了两个新型添加型阻燃剂:双酚A双[二(1-氧代-1-磷杂-2,6,7-三氧杂双环辛烷-4-亚甲基)]磷酸酯(BAPP)和双酚S双[二(1-氧代-1-磷杂-2,6,7-三氧杂双环辛烷-4-亚甲基)]磷酸酯(BSPP),通过元素分析、FT-IR和1H NMR等表征了标题化合物的结构,结果表明,所合成的标题化合物的结构与预期一致。热失重分析结果证明,BAPP和BSPP质量损失5%(wt)时的温度分别为343.6℃和352.3℃,600℃残余量分别达46.6%和55.5%,具有较高的热稳定性和结炭性能。阻燃性能实验证明,E-51环氧树脂中分别添加质量分数为18.2%(wt)的BAPP和BSPP时,极限氧指数分别为32.2%和31.8%,均能达到UL 94 V-0级。     

磷杂菲类阻燃剂的合成及其与聚磷酸铵复合膨胀体系对环氧树脂的阻燃性能研究

以9,10-二氢-9-氧杂-10-磷杂菲-10-氧化物(DOPO)、五硫化二磷(P2S5)为原料合成9,10-二氢-9-氧杂-10-磷杂菲-10-硫化物(DOPS),并将DOPS与聚磷酸铵(APP)组成复合阻燃剂,用于环氧树脂(EP)的阻燃改性.通过氧指数(LOI)、垂直燃烧(UL-94)、热失重(TGA)、锥形量热(CONE)和扫描电镜(SEM)等方法对改性后的环氧树脂的阻燃性能和阻燃机理进行了测试和分析.实验结果表明,DOPS/APP阻燃体系对EP具有很好的阻燃性能,且复配阻燃剂的阻燃效果比单一的阻燃剂阻燃效果好;其中,当阻燃剂的总添加量达到30%时即W_(DOPS)=10%、W_(APP)=20%时,阻燃EP复合材料的LOI值可达到29.2%,垂直燃烧等级达到UL-94 V-0级,残炭量可达49.3%.     

双酚A双(二苯基)磷酸酯对环氧树脂的阻燃性能

采用双酚A双(二苯基)磷酸酯(BDP)、有机改性蒙脱土(OMMT)和环氧树脂(EP),分别制备了阻燃环氧树脂(BDP-EP)和阻燃纳米材料(BDP-OMMT-EP).利用氧指数、水平垂直燃烧、热重分析以及锥形量热等技术探讨了阻燃材料的阻燃性能和阻燃机理.实验结果证明,BDP-EP和BDP-OMMT-EP的最大热释放速率和平均热释放速率等参数都降低了,但是BDP的阻燃效果优于BDP-OMMT,即BDP和OMMT没有协同阻燃作用.     

Flame retardancy of fibre-reinforced epoxy resin composites for aerospace applications

The applicability of phosphorus-containing reactive amine, which can be used in epoxy resins both as crosslinking agent and as flame retardant, was compared in an aliphatic and an aromatic epoxy resin system. In order to fulfil the strong requirements on mechanical properties of the aircraft and aerospace applications, where they are mostly supposed to be applied, carbon fibre-reinforced composites were prepared. The flame retardant performance was characterized by relevant tests and mass loss type cone calorimeter. Besides the flame retardancy, the tensile and bending characteristics and interlaminar shear strength were evaluated. The intumescence-hindering effect of the fibre reinforcement was overcome by forming a multilayer composite, consisting of reference composite core and intumescent epoxy resin coating layer, which proved to provide simultaneous amelioration of flame retardancy and mechanical properties of epoxy resins.     

Synthesis,characterization, thermal,and flame retardant properties of phosphate-based epoxy resins

A new phosphorus-containing oxirane bis-glycidyl phenylphosphate (BGPP), and a diamine, bis(4-aminophenyl)phenylphosphate (BAPP), were synthesized. Both of these two phosphorus-containing compounds lead to phosphate-containing epoxy resin via curing reaction. The kinetics of the curing reaction of BGPP with various curing agents, including BAPP, were studied. The introduction of electron-withdrawing group into the compounds increases the BGPP and decreases the BAPP reactivity in the curing reaction. The thermal and the weight loss behavior of the cured epoxy resins were studied by TGA. High char yields (32–52%) as well as high limiting oxygen index (LOI) values (34–49) of these phosphorylated resins were found, confirming the usefulness of these phosphorus-containing epoxy resins as flame retardants. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 565–574, 1997.     

Immobilization of flame retardant onto silica nanoparticle surface and properties of epoxy resin filled with the flame retardant‐immobilized silica

To prepare silica nanoparticle having flame retardant activity, the immobilization of flame retardant onto hyperbranched poly(amidoamine) (PAMAM)‐grafted silica was investigated. Grafting of PAMAM onto a silica surface was achieved in a solvent‐free dry‐system using PAMAM dendrimer synthesis methodology. The immobilization of bromine flame retardant, poly(2,2′,6,6′‐tetrabromobisphenol‐A) diglycidyl ether (PTBBA), was successfully achieved by the reaction of terminal amino groups of PAMAM‐grafted silica (Silica‐PAMAM) with epoxy groups of PTBBA. The immobilization of PTBBA was confirmed by FTIR and thermal decomposition GC‐MS. The amount of PTBBA immobilized onto Silica‐PAMAM was determined to be 60 wt %. PTBBA‐immobilized Silica‐PAMAM (Silica‐PAMAM‐PTBBA) was dispersed uniformly in a epoxy resin, and the epoxy resin was cured in the presence of hexamethylenediamine. Flame retardant activity of the epoxy resin filled with Silica‐PAMAM‐PTBBA was estimated by limiting oxygen index (LOI). The LOI of epoxy resin filled with Silica‐PAMAM‐PTBBA was higher than that filled with untreated silica and free PTBBA. It was confirmed that the flame retardant activity of epoxy resin was improved by the addition of the Silica‐PAMAM‐PTBBA. The elimination of PTBBA from the epoxy resin filled with Silica‐PAMAM‐PTBBA into boiling water was hardly observed by immobilization of PTBBA onto silica surface. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6145–6152, 2009     

Flame retardant epoxy resin based on bisphenol A epoxy resin modified by phosphoric acid

Flame retardant epoxy resin (FREP) were synthesized from phosphoric acid and bisphenol A epoxy resin (BAEP). The structure of the FREP was characterized using FTIR and ³¹P NMR. Then, several FREP/BAEP mass ratios were used to obtain materials with different phosphorus contents. The properties of the thermosetting materials were evaluated by limiting oxygen index, UL 94, cone calorimeter test, and thermogravimetric analysis. The results showed that the heat release rates and smoke production rates decreased greatly, and char residue increased with the increasing of FREP. It indicates that good flame retardant properties are related to the formation of a protective phosphorus-rich char layer.     

Study on liquid oxygen compatibility of bromine‐containing epoxy resins for the application in liquid oxygen tank

The liquid oxygen compatible epoxy resin was obtained by the polycondensation between tetrabromobisphenol A and neat epoxy resins. The results of liquid oxygen impact test indicated that the synthetic epoxy resins were compatible with liquid oxygen. The relationship between impact reaction sensitivity (IRS) and flame retardancy were studied by liquid oxygen impact test and limiting oxygen index test. The results showed that the flame‐retardant modification of epoxy resin was valuable to reduce the IRS. The thermal gravimetric analysis results indicated that the Br · radical was quickly released in relatively low temperature (approximately 370°C) for compatible epoxy resin. The Br · radical was a key factor to promote the epoxy resin compatible with the liquid oxygen. The X‐ray photoelectron spectroscopy was used to survey the distribution of functional groups on the surface of samples before and after impact. The results showed that the oxidation reaction and carbonization process may occur on the surface of samples after impact. The liquid oxygen compatibility mechanism is proposed in this paper. The bromine‐containing epoxy resin has the potential to be the material used in liquid oxygen tank. Copyright © 2015 John Wiley & Sons, Ltd.     

Thermal and flame retardant properties of epoxy resin cured by a novel phosphorus-containing 4,4′-bisphenol novolac curing agent

A novel flame retardant curing agent for epoxy resin (EP), i.e., a DOPO (9,10-dihydro-9-oxa-10-phosphaphenan-threne-10-oxide)-containing 4,4'-bisphenol novolac (BIP-DOPO) was synthesized and characterized by Fourier transform infrared (FTIR), ¹H NMR, ³¹P NMR spectroscopy, and gel permeation chromatography. The epoxy resin cured by BIP-DOPO itself or its mixture with a commonly used bisphenol A-formaldehyde novolac resin (NPEH720) was prepared. The flame retardancy of the cured EP thermosets were studied by limiting oxygen index (LOI), UL 94 and cone calorimeter test (CCT), and the thermal properties by thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC). The results show that the cured epoxy resin EPNP/BI/3/1, which contains 2.2% phosphorus, possesses a value of 26.2% and achieves the UL 94 V-0 rating. The data from cone calorimeter test demonstrated that the peak release rate, average heat release rate, total heat release decline sharply for the flame retarded epoxy resins, compared with those of pure ones. DSC results show that the glass-transition temperatures of cured epoxy resins decrease with increasing phosphorus content. TGA indicates that the incorporation of BIP-DOPO promotes the decomposition of epoxy resin matrix ahead of time and leads to higher char yield. The surface morphological structures of the char residues reveal that the introduction of BIP-DOPO benefits to the formation of a continuous and solid char layer on the epoxy resin material surface during combustion.     

A vanillin-derived flame retardant based on 2-aminopyrimidine for enhanced flame retardancy and mechanical properties of epoxy resin

In order to give epoxy resin good flame retardance, a novel bio-based flame retardant based on 2-aminopyrimidine (referred to as VAD) was synthesized from renewable vanillin as one of the starting materials. Its structure was confirmed by NMR and mass spectra. The epoxy resins containing VAD were prepared by utilizing 4,4-diaminodiphenylmethane (DDM) as a co-curing agent, and their flame-retardant, mechanical and thermal properties and corresponding mechanisms were studied. VAD accelerated the cross-linking reaction of DDM and E51 (diglycidyl ether of bisphenol A). 12.5 wt% VAD made the epoxy resin achieve UL-94 V-0 rating and its limited oxygen index (LOI) value increase from 22.4% to 32.3%. The cone calorimetric testing results revealed the decline in the values of total heat release (THR) and peak of heat release rate (pk-HRR) and the obvious enhancement of residue yield. A certain amount of VAD enhanced the flame inhibition, charring and barrier effects, resulting in good flame retardance of the epoxy resin. Furthermore, the tensile strength, flexural strength and flexural modulus of the epoxy resin with 12.5 wt% loading of VAD were 6.5%, 14.9%, 15.2% higher than those of EP, indicating the strengthening effect of VAD. This work guarantees VAD to be a promising flame retardant for enhancing the fire retardancy of epoxy resin without compromising its mechanical properties.     

Intrinsically flame retardant epoxy resin - Fire performance and background - Part I

The flame retardant effect of newly synthesized phosphorus-containing reactive amine, which can be used both as crosslinking agent in epoxy resins and as a flame retardant, was investigated. The effect of montmorillonite and sepiolite additives on the fire induced degradation was compared to pristine epoxy resin. The effect of combining the organophosphorous amine with clay minerals was also studied. It could be concluded that the synthesized phosphorus-containing amine, TEDAP can substitute the traditional epoxy resin curing agents providing additionally excellent flame retardancy: the epoxy resins flame retarded this way reach 960 °C GWFI value, 33 LOI value and V-0 UL-94 rating - compared to the 550 °C GWFI value, 21 LOI value and “no rate” UL-94 classification of the reference epoxy resin. The peak of heat release was reduced to 1/10 compared to non-flame retarded resin, furthermore a shift in time was observed, which increases the time to escape in case of fire. The flame retardant performance can be further improved by incorporating clay additives: the LOI and the HRR results showed that the optimum of flame retardant effect of clay additives is around 1 mass% filler level in AH-16-TEDAP system. Applying a complex method for mechanical and structural characterization of the intumescent char it was determined that the flame retarded system forms significantly more and stronger char of better uniformity with smaller average bubble size. Incorporation of clay additives (owing to their bubble nucleating activity) results in further decrease in average bubble diameter.     

Improved flame retardant properties of epoxy resin by fluorinated MMT/MWCNT additives

Flame retardant additives of montmorillonite (MMT) and multi-walled carbon nanotube (MWCNT) were embedded in epoxy resin to improve the resin's flame retardant properties. MMT was fluorinated to exfoliate its layers and enhance its dispersion into the epoxy resin. The MWCNT was also fluorinated to create hydrophobic functional groups for improved dispersion into the epoxy resin. The MWCNT reduced the degradation rate of the epoxy resin and increased the char yield. Limiting oxygen index also increased showing first order against char yield. The exfoliated MMT acted as an energy storage medium to hinder thermal transfer within the epoxy resin. The activation energy increased almost two times by fluorinated MMT/MWCNT additives. The fluorination of the additives, MMT and MWCNT significantly improved the flame retardant properties of the epoxy resin.     

Novel nanocomposites based on epoxy resin and modified magnesium hydroxide: Focus on flame retardancy and mechanical properties

In this work, a novel multifunctional organic‐inorganic hybrid flame agent (AM‐MEL) was prepared from magnesium hydroxide nanosheets decorated by nitrilotrimethylene triphosphonic acid and melamine. Then, an intrinsic flame‐retardant epoxy resin (EP) was prepared by covalently incorporating AM‐MEL nanoparticles. Meanwhile, ammonium polyphosphate (APP) was added into EP to form an intumescent flame retardant system with AM‐MEL. The chemical structure of AM‐MEL was characterized by Fourier transform infrared spectra, X‐ray photoelectron spectroscopy, and scanning electron microscopy. With the incorporation of 5 wt% AM‐MEL and 15 wt% APP, EP/AM‐MEL/APP could reach a limiting oxygen index value of 32.0% and achieve UL‐94 V‐0 rating, along with 88.0%, 70.0%, 81.5%, and 87.3% decrease in the peak heat release rate, total heat release, total smoke production, and the peak CO production rate, respectively, with respect to that of pure EP. The mechanisms of its flame retardant and smoke suppression were investigated.     

Development of flame retardant phosphorus- and silicon-containing polybenzoxazines

The copolymerisation of benzoxazine of bisphenol A and diglycidyl ether of (2,5-dihydroxyphenyl)diphenyl phosphine oxide or diglycidyloxymethylphenylsilane has been studied. In all samples the molar ratio of the benzoxazine-epoxy system was varied to achieve different phosphorus or silicon contents. Their thermal, dynamic-mechanical and flame retardant properties were evaluated. The high limiting oxygen index values confirmed that the phosphorus-containing benzoxazine-epoxy resins are effective flame retardants, but no efficiency of silicon on flame retardation was observed.     

含硅磷杂化物环氧树脂固化物性能研究

首先用γ-环氧丙氧基三甲氧基硅烷(KH-560)和亚磷酸二乙酯(DEP)反应的中间产物进行水解缩合反应,合成了一种含磷低聚硅氧烷杂化物.并用FTIR,NMR,GPC对其结构及分子量进行了表征.然后将含磷低聚硅氧烷引入到双酚A环氧树脂(E-54)制备硅磷杂化物环氧树脂的固化物.对这种含硅磷杂化物环氧树脂固化物的性能研究发现其极限氧指数为23～29,DSC分析结果玻璃化转变温度(Tg)可以达到204℃,失重5%的温度(Td)5%比纯E-54提高近20℃.该固化物具有阻燃性能,同时具有较好的热性能。     

含磷有机硅杂化环氧树脂固化体系性能研究

通过磷酸与γ-环氧丙氧基三甲氧基硅烷反应得到含磷有机硅氧烷,并加入到环氧树脂/4,4'-二氨基二苯基甲烷体系中混合,通过溶胶-凝胶的方法制备了含磷有机硅杂化环氧树脂固化物.对固化体系进行了玻璃化转变温度、热失重、阻燃、拉伸强度、冲击强度测试分析.结果表明,该固化体系的阻燃性得到提高,极限氧指数在25.8～29.3,玻璃化转变温度得到提高,在161～179℃;虽然初始分解温度比纯环氧树脂固化物低,但800℃残炭率可以达到26.5%,提高了36%;拉伸强度得到提高,在71～94 MPa,冲击强度可以达到14.36 kJ/m2,提高了14%.该固化体系具有较好的阻燃性能和热性能,同时具有较好的力学性能.     

A flame‐retardant phosphate and cyclotriphosphazene‐containing epoxy resin: Synthesis and properties

A novel flame‐retardant epoxy resin, (4‐diethoxyphosphoryloxyphenoxy)(4‐glycidoxyphenoxy)cyclotriphosphazene (PPCTP), was prepared by the reaction of epichlorohydrin with (4‐diethoxyphosphoryloxyphenoxy)(4‐hydroxyphenoxy)cyclotriphosphazene and was characterized by Fourier transform infrared, ³¹P NMR, and ¹H NMR analyses. The epoxy resin was further cured with diamine curing agents, 4,4′‐diaminodiphenylmethane (DDM), 4,4′‐diaminodiphenylsulfone (DDS), dicyanodiamide (DICY), and 3,4′‐oxydianiline (ODA), to obtain the corresponding epoxy polymers. The curing reactions of the PPCTP resin with the diamines were studied by differential scanning calorimetry. The reactivities of the four curing agents toward PPCTP were in the following order: DDM > ODA > DICY > DDS. In addition, the thermal properties of the cured epoxy polymers were studied by thermogravimetric analysis, and the flame retardancies were estimated by measurement of the limiting oxygen index (LOI). Compared to a corresponding Epon 828‐based epoxy polymer, the PPCTP‐based epoxy polymers showed lower weight‐loss temperatures, higher char yields, and higher LOI values, indicating that the epoxy resin prepared could be useful as a flame retardant. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 972–981, 2000     

Preparation of phosphorus‐containing phenolic resin and its application in epoxy resin as a curing agent and flame retardant

For the sake of improving the flame retardancy of epoxy resin (EP), a novel phosphorus‐containing phenolic resin (PPR) synthesized in our group instead of conventional phenolic resin (PR) was used to cure EP in the present research. The curing processes and the corresponding crosslinking structure and mechanical performance were investigated by differential scanning calorimeter and dynamic mechanical thermal analysis. Because of the introduction of flame‐retarding elements including P and Si, PPR exhibited higher charring capacity in the condensed phase, which is helpful to construct a char layer of higher quality. Correspondingly, PPR‐cured EP displayed remarkably improved flame retardance as compared to conventional PR‐cured EP through the related evaluations including limiting oxygen index, vertical burning test, and microscale combustion colorimeter. As a multifunction agent, it is believable that PPR possesses potential commercial value to prepare flame‐retardant EP with high performance.