Modeling the active sites in metalloenzymes. 3. Density functional calculations on models for [Fe]-hydrogenase: structures and vibrational frequencies of the observed redox forms and the reaction mechanism at the Diiron Active Center.

Optimized structures for the redox species of the diiron active site in [Fe]-hydrogenase as observed by FTIR and for species in the catalytic cycle for the reversible H(2) oxidation have been determined by density-functional calculations on the active site model, [(L)(CO)(CN)Fe(mu-PDT)(mu-CO)Fe(CO)(CN)(L')](q)(L = H(2)O, CO, H(2), H(-); PDT = SCH(2)CH(2)CH(2)S, L' = CH(3)S(-), CH(3)SH; q = 0, 1-, 2-, 3-). Analytical DFT frequencies on model complexes (mu-PDT)Fe(2)(CO)(6) and [(mu-PDT)Fe(2)(CO)(4)(CN)(2)](2)(-) are used to calibrate the calculated CN(-) and CO frequencies against the measured FTIR bands in these model compounds. By comparing the predicted CN(-) and CO frequencies from DFT frequency calculations on the active site model with the observed bands of D. vulgaris [Fe]-hydrogenase under various conditions, the oxidation states and structures for the diiron active site are proposed. The fully oxidized, EPR-silent form is an Fe(II)-Fe(II) species. Coordination of H(2)O to the empty site in the enzyme's diiron active center results in an oxidized inactive form (H(2)O)Fe(II)-Fe(II). The calculations show that reduction of this inactive form releases the H(2)O to provide an open coordination site for H(2). The partially oxidized active state, which has an S = (1)/(2) EPR signal, is an Fe(I)-Fe(II) species. Fe(I)-Fe(I) species with and without bridging CO account for the fully reduced, EPR-silent state. For this fully reduced state, the species without the bridging CO is slightly more stable than the structure with the bridging CO. The correlation coefficient between the predicted CN(-) and CO frequencies for the proposed model species and the measured CN(-) and CO frequencies in the enzyme is 0.964. The proposed species are also consistent with the EPR, ENDOR, and M?ssbauer spectroscopies for the enzyme states. Our results preclude the presence of Fe(III)-Fe(II) or Fe(III)-Fe(III) states among those observed by FTIR. A proposed reaction mechanism (catalytic cycle) based on the DFT calculations shows that heterolytic cleavage of H(2) can occur from (eta(2)-H(2))Fe(II)-Fe(II) via a proton transfer to "spectator" ligands. Proton transfer to a CN(-) ligand is thermodynamically favored but kinetically unfavorable over proton transfer to the bridging S of the PDT. Proton migration from a metal hydride to a base (S, CN, or basic protein site) results in a two-electron reduction at the metals and explains in part the active site's dimetal requirement and ligand framework which supports low-oxidation-state metals. The calculations also suggest that species with a protonated Fe-Fe bond could be involved if the protein could accommodate such species.     

Density functional theory investigation of the active site of [Fe]-hydrogenases: effects of redox state and ligand characteristics on structural,electronic, and reactivity properties of complexes related to the [2Fe]H subcluster

The effects of redox state and ligand characteristics on structural, electronic, and reactivity properties of complexes related to the [2Fe](H) subcluster of [Fe]-hydrogenases have been investigated by DFT calculations and compared with experimental and theoretical data obtained investigating both the enzyme and synthetic model complexes. Our results show that Fe(II)Fe(II) species characterized by OH or H(2)O groups terminally coordinated to the iron atom distal to the terminal sulfur ligand (Fe(d)) are less stable than corresponding mu-OH or mu-H(2)O species, suggesting that the latter are destabilized or kinetically inaccessible in the enzyme. In addition, results obtained investigating Fe(I)Fe(I) and Fe(II)Fe(I) complexes show that structure and relative stability of species characterized by a mu-CO group are significantly affected by the electronic properties of the ligands coordinated to the iron atoms. The investigation of reaction pathways for H(2) activation confirms and extends a previous hypothesis indicating that H(2) can be cleaved on Fe(II)Fe(II) species. In particular, even though [Fe]-hydrogenases are proposed to bind and activate H(2) at a single iron center, the comparison of our data with experimental results obtained studying synthetic complexes (Zhao, X.; Georgakaki, I. P.; Miller, M. L.; Mejia-Rodriguez, R.; Chiang, C.-Y.; Darensbourg, M. Y. Inorg. Chem. 2002, 41, 3917) suggests that activation paths involving both metal ions are also possible. Moreover, mu-H Fe(II)Fe(I) complexes are predicted to correspond to stable species and might be formed in the enzyme catalytic cycle.     

Synthesis and reactivity of Haloacetato derivatives of iron(II) including the crystal and the molecular structure of [Fe(CF3COOH)2(micro-CF3COO)2]n

The syntheses of haloacetates of iron(II) and their reactivity are described. The compound Fe(CF3COO)2, 1, crystallizes from CF3COOH/(CF3CO)2O solution as the polynuclear [Fe(CF3COO)2(CF3COOH)2]n, 2, which contains bridging trifluoroacetates and monodentate trifluoroacetic acid groups. Fe(CF3COO)2(DMF)x, as obtained from Fe(CO)5 and CF3COOH/(CF3CO)2O in DMF, reacts with dioxygen at room temperature to give two micro3-oxo compounds, namely, [Fe3(micro3-O)(CF3COO)6(DMF)3], 3, a Fe(II)-Fe(III)-Fe(III) derivative, and [Fe4(micro3-O)2(micro2-CF3COO)6(CF3COO)2(DMF)4], 4, containing Fe(III) atoms only, which have been characterized by X-ray diffraction methods. Iron(II) chloro- and bromoacetates can be isolated by exchange reactions of iron(II) acetate with chloro- and bromo-substituted acetic acids in moderate to good yields. The stability of iron(II) haloacetates decreases on increasing the atomic weight and the number of halogens on the alpha-carbon atom. The species Fe(CX3COO)2 (X = Cl, 7; Br, 8), in THF solution, slowly convert into [Fe3(micro3-O)(CCl3COO)6(THF)3], 11, or [Fe3(micro3-O)(CBr3COO)6(THF)3][FeBr4], 10, respectively. Likewise, when iron(II) acetate (or trifluoroacetate) is left for several hours in the presence of a variety of haloacetic acids in THF, selective formation of different species, depending on the nature of the starting compound and of the acid employed, is observed. The formation of these products is the result of C-X bond activation (X = Cl, Br) and haloacetato decomposition, which occurs with concomitant oxidation at the metal centers. Carboxylic acid degradation species (CH2XCOOH, CX4, CX3H, CX2H2, X = Cl, Br) have been observed by GC-MS.     

Role of the azadithiolate cofactor in models for [FeFe]-hydrogenase: novel structures and catalytic implications

This paper summarizes studies on the redox behavior of synthetic models for the [FeFe]-hydrogenases, consisting of diiron dithiolato carbonyl complexes bearing the amine cofactor and its N-benzyl derivative. Of specific interest are the causes of the low reactivity of oxidized models toward H(2), which contrasts with the high activity of these enzymes for H(2) oxidation. The redox and acid-base properties of the model complexes [Fe(2)[(SCH(2))(2)NR](CO)(3)(dppv)(PMe(3))](+) ([2](+) for R = H and [2'](+) for R = CH(2)C(6)H(5), dppv = cis-1,2-bis(diphenylphosphino)ethylene)) indicate that addition of H(2) followed by deprotonation are (i) endothermic for the mixed valence (Fe(II)Fe(I)) state and (ii) exothermic for the diferrous (Fe(II)Fe(II)) state. The diferrous state is shown to be unstable with respect to coordination of the amine to Fe, a derivative of which was characterized crystallographically. The redox and acid-base properties for the mixed valence models differ strongly for those containing the amine cofactor versus those derived from propanedithiolate. Protonation of [2'](+) induces disproportionation to a 1:1 mixture of the ammonium [H2'](+) (Fe(I)Fe(I)) and the dication [2'](2+) (Fe(II)Fe(II)). This effect is consistent with substantial enhancement of the basicity of the amine in the Fe(I)Fe(I) state vs the Fe(II)Fe(I) state. The Fe(I)Fe(I) ammonium compounds are rapid and efficient H-atom donors toward the nitroxyl compound TEMPO. The atom transfer is proposed to proceed via the hydride. Collectively, the results suggest that proton-coupled electron-transfer pathways should be considered for H(2) activation by the [FeFe]-hydrogenases.     

Electrochemical and photosensitized redox reactions of a prussian blue film layered on a WO3/[Ru(bpy)3]2+/polymer hybrid film.

A hybrid film of WO(3)/tris(2,2'-bipyridine)ruthenium(II) ([Ru(bpy)(3)](2+))/poly(sodium 4-styrenesulfonate) (PSS) (denoted as a WRP hybrid film) was prepared as a base layer on an indium tin oxide electrode substrate by cathodic electrodeposition from a colloidal ternary solution containing peroxotungstic acid, [Ru(bpy)(3)](2+), and PSS. Prussian blue, Fe(III) (4)[Fe(II)(CN)(6)](3) (Fe(II)-Fe(III)) was cathodically electrodeposited on the WRP hybrid film from a Berlin brown (Fe(III)-Fe(III)) colloidal solution to give a WRP/Fe(II)-Fe(III) bilayer film. Spectrocyclic voltammetry measurement of the WRP/Fe(II)-Fe(III) bilayer film reveals that Prussian white (Fe(II)-Fe(II)) is oxidized to Fe(II)-Fe(III) by electrogenerated Ru(III), and Fe(II)-Fe(III) is re-reduced to Fe(II)-Fe(II) by electrogenerated H(x)WO(3). Visible-light irradiation of the WRP hybrid film generates a small photocurrent (approximately 8 nA cm(-2)) at 0.4 V of an applied potential, whereas irradiation of the WRP/Fe(II)-Fe(II) bilayer film (Fe(II)-Fe(III) is electrochemically reduced to the Fe(II)-Fe(II) state) significantly generates a steady photoanodic current of 2.0-1.1 microA cm(-2) under the same conditions, thus demonstrating that the photoanodic current is produced by the layered Fe(II)-Fe(II) film. The photoaction spectrum of the bilayer film reveals that the photoanodic current is based on the photoexcitation of [Ru(bpy)(3)](2+). The photogeneration of Fe(II)-Fe(III) from Fe(II)-Fe(II) is shown by the absorption spectral change of the bilayer film on irradiation. These results corroborate the notion that Fe(II)-Fe(II) is oxidized by photogenerated Ru(III) to generate Fe(II)-Fe(III). However, the rate of photogeneration of Fe(II)-Fe(III) is slow, which could be ascribed to the fast back electron transfer (ET) from WO(3) to Ru(III), comparable with the forward ET from Fe(II)-Fe(II) to Ru(III). The fast back ET could be a crucial problem for the [Ru(bpy)(3)](2+)-sensitized reaction in the hybrid film.     

Olefin cis-dihydroxylation with bio-inspired iron catalysts. evidence for an Fe(II)/Fe(IV) catalytic cycle

Iron(II) complexes of a series of N-acylated dipyridin-2-ylmethylamine ligands (R-DPAH) have been investigated as catalysts for the cis-dihydroxylation of olefins to model the action of Rieske dioxygenases that catalyze arene cis-dihydroxylation. The Rieske dioxygenases have a mononuclear iron active site coordinated to a 2-histidine-1-carboxylate facial triad motif. The R-DPAH ligands are designed to provide a facial N,N,O-ligand set that mimics the enzyme active site. The iron(II) complexes of the R-DPAH ligands activate H(2)O(2) to effect the oxidation of olefin substrates into cis-diol products. As much as 90% of the H(2)O(2) oxidant is converted into cis-diol, but a large excess of olefin is required to achieve the high conversion efficiency. Reactivity and mechanistic comparisons with the previously characterized Fe(TPA)/H(2)O(2) catalyst/oxidant combination (TPA = tris(pyridin-2-ylmethyl)amine) lead us to postulate an Fe(II)/Fe(IV) redox cycle for the Fe(R-DPAH) catalysts in which an Fe(IV)(OH)(2) oxidant carries out the cis-hydroxylation of olefins. This hypothesis is supported by three sets of observations: (a) the absence of a lag phase in the conversion of the H(2)O(2) oxidant into a cis-diol product, thereby excluding the prior oxidation of the Fe(II) catalyst to an Fe(III) derivative as established for the Fe(TPA) catalyst; (b) the incorporation of H(2)(18)O into the cis-diol product, thereby requiring O-O bond cleavage to occur prior to cis-diol formation; and (c) the formation of cis-diol as the major product of cyclohexene oxidation, rather than the epoxide or allylic alcohol products more commonly observed in metal-catalyzed oxidations of cyclohexene, implicating an oxidant less prone to oxo transfer or H-atom abstraction.     

Computational investigation of the concerted dismutation of chlorite ion by water-soluble iron porphyrins

A detailed density functional theory examination of the reaction of an iron porphyrin chlorite dismutase model complex with chlorite was performed. We find that the molecular oxygen production observed occurs via the formation of η(1)-Fe(III) chlorite species, followed by the formation of O═Fe(IV) (compound II) and chlorine monoxide through homolytic bond cleavage. Chlorine monoxide then rebounds to form Fe(III)-peroxyhypochlorite followed by subsequent loss of chloride and loss of dioxygen accompanied by spin conversion to produce the Fe(III) complex and complete the catalytic cycle.     

3d-Metal derivatives of the [Cu(I)(SO3)4]7- ion: structure and magnetism

The Cu(SO(3))(4)(7-) anion, which consists of a tetrahedrally coordinated Cu(I) centre coordinated to four sulfur atoms, is able to act as a multidentate ligand in discrete and infinite supramolecular species. The slow oxidation of an aqueous solution of Na(7)Cu(SO(3))(4) yields a mixed oxidation state, 2D network of composition Na(5){[Cu(II)(H(2)O)][Cu(I)(SO(3))(4)]}·6H(2)O. The addition of Cu(II) and 2,2'-bipyridine to an aqueous Na(7)Cu(SO(3))(4) solution leads to the formation of a pentanuclear complex of composition {[Cu(II)(H(2)O)(bipy)](4)[Cu(I)(SO(3))(4)]}(+); a combination of hydrogen bonding and π-π stacking interactions leads to the generation of infinite parallel channels that are occupied by disordered nitrate anions and water molecules. A pair of Cu(SO(3))(4)(7-) anions each act as a tridentate ligand towards a single Mn(II) centre when Mn(II) ions are combined with an excess of Cu(SO(3))(4)(7-). An anionic pentanuclear complex of composition {[Cu(I)(SO(3))(4)](2)[Fe(III)(H(2)O)](3)(O)} is formed when Fe(II) is added to a Cu(+)/SO(3)(2-) solution. Hydrated ferrous [Fe(H(2)O)(6)(2+)] and sodium ions act as counterions for the complexes and are responsible for the formation of an extensive hydrogen bond network within the crystal. Magnetic susceptibility studies over the temperature range 2-300 K show that weak ferromagnetic coupling occurs within the Cu(II) containing chains of Na(5){[Cu(II)(H(2)O)][Cu(I)(SO(3))(4)]}·6H(2)O, while zero coupling exists in the pentanuclear cluster {[Cu(II)(H(2)O)(bipy)](4)[Cu(I)(SO(3))(4)]}(NO(3))·H(2)O. Weak Mn(II)-O-S-O-Mn(II) antiferromagnetic coupling occurs in Na(H(2)O)(6){[Cu(I)(SO(3))(4)][Mn(II)(H(2)O)(2)](3)}, the latter formed when Mn was in excess during synthesis. The compound, Na(3)(H(2)O)(6)[Fe(II)(H(2)O)(6)](2){[Cu(I)(SO(3))(4)](2)[Fe(III)(H(2)O)](3)(O)}·H(2)O, contained trace magnetic impurities that affected the expected magnetic behaviour.     

Stereospecific alkane hydroxylation by non-heme iron catalysts: mechanistic evidence for an Fe(V)=O active species.

High-valent iron-oxo species have frequently been invoked in the oxidation of hydrocarbons by both heme and non-heme enzymes. Although a formally Fe(V)=O species, that is, [(Por(*))Fe(IV)=O](+), has been widely accepted as the key oxidant in stereospecific alkane hydroxylation by heme systems, it is not established that such a high-valent state can be accessed by a non-heme ligand environment. Herein we report a systematic study on alkane oxidations with H(2)O(2) catalyzed by a group of non-heme iron complexes, that is, [Fe(II)(TPA)(CH(3)CN)(2)](2+) (1, TPA = tris(2-pyridylmethyl)amine) and its alpha- and beta-substituted analogues. The reactivity patterns of this family of Fe(II)(TPA) catalysts can be modulated by the electronic and steric properties of the ligand environment, which affects the spin states of a common Fe(III)-OOH intermediate. Such an Fe(III)-peroxo species is high-spin when the TPA ligand has two or three alpha-substituents and is proposed to be directly responsible for the selective C-H bond cleavage of the alkane substrate. The thus-generated alkyl radicals, however, have relatively long lifetimes and are susceptible to radical epimerization and trapping by O(2). On the other hand, 1 and the beta-substituted Fe(II)(TPA) complexes catalyze stereospecific alkane hydroxylation by a mechanism involving both a low-spin Fe(III)-OOH intermediate and an Fe(V)=O species derived from O-O bond heterolysis. We propose that the heterolysis pathway is promoted by two factors: (a) the low-spin iron(III) center which weakens the O-O bond and (b) the binding of an adjacent water ligand that can hydrogen bond to the terminal oxygen of the hydroperoxo group and facilitate the departure of the hydroxide. Evidence for the Fe(V)=O species comes from isotope-labeling studies showing incorporation of (18)O from H(2)(18)O into the alcohol products. (18)O-incorporation occurs by H(2)(18)O binding to the low-spin Fe(III)-OOH intermediate, its conversion to a cis-H(18)O-Fe(V)=O species, and then oxo-hydroxo tautomerization. The relative contributions of the two pathways of this dual-oxidant mechanism are affected by both the electron donating ability of the TPA ligand and the strength of the C-H bond to be broken. These studies thus serve as a synthetic precedent for an Fe(V)=O species in the oxygen activation mechanisms postulated for non-heme iron enzymes such as methane monooxygenase and Rieske dioxygenases.     

Activation of alkenes and H2 by [Fe]-H2ase model complexes

The established ability of the Fe(II) bridging hydride species (micro-H)(micro-pdt)[Fe(CO)2(PMe3)]2+, 1-H+, to take-up and heterolytically activate dihydrogen, resulting in H/D scrambling of H2/D2 and H2/D2O mixtures (Zhao et al. Inorg. Chem. 2002, 41, 3917) has prompted a study of simultaneous alkene/H2 activation by such [Fe]H2ase model complexes. That the required photolysis produced an open site was substantiated by substitution of CO in 1-H+ by CH3CN with formation of structurally characterized [(micro-H)(micro-pdt)[Fe(CO)2(PMe3)][Fe(CO)(CH3CN)(PMe3)]]+[PF6]-. Under similar photolytic conditions, H/D exchange reactions between D2 and terminal alkenes (ethylene, propene and 1-butene), but not bulkier alkenes such as 2-butene or cyclohexene, were catalyzed by 1-H+ and the edt (SCH2CH2S) analogue, 2-H+. Substantial regioselectivity for H/D exchange at the internal vinylic hydrogen was observed. The extent to which the olefins were deuterium enriched vs deuterated was catalyst dependent. The stabilizing effect of the binuclear chelating ligands, SCH2CH2CH2S, pdt, and SCH2CH2S, edt, is required for the activity of binuclear catalysts, as the mono-dentate micro-SEt analogue decomposed to inactive products under the photolytic conditions of the catalysis. Reactions of 1 and 2 with EtOSO2CF3 yielded the S-alkylated products, [(micro-SCH2CH2CH2SEt)[Fe(CO)2(PMe3)]2]+[SO3CF3]- (1-Et+), and 2-Et+, rather than micro-C2H5 analogues to the micro-H of 1-H+. The stability and lack of reactivity toward H2 of 1-Et+ and 2-Et+, indicates they are not on the reaction path of the olefin/D2 H/D exchange process. A mechanism with olefin binding to an open site created by CO loss and formation of an Fe-(CH2CHDR) intermediate is indicated. A likely role of a binuclear chelate effect is implicated for the unique S-XXX-S cofactor in the active site of [Fe]H2ase.     

Mechanistic implications of the active species involved in the oxidation of hydrocarbons by iron complexes of pyrazine-2-carboxylic acid

The reactivity towards H(2)O(2) of the complexes [Fe(pca)(2)(py)(2)].py (1) and Na(2){[Fe(pca(3))](2)O}.2H(2)O.CH(3)CN (2) (where pca(-) is pyrazine-2-carboxylate) and their catalytic activity in the oxidation of hydrocarbons is reported. Addition of H(2)O(2) to 1 results in the formation of a dinuclear Fe(III)-(mu-O)-Fe(III) species characterized spectroscopically and by cyclic voltammetry. By contrast, treatment of 2 with H(2)O(2) results in the formation of mononuclear iron(II) complexes, [Fe(pca)(2)(solvent)(2)]. The experimental results indicate that the catalytic activity of the starting complexes 1 and 2 is strongly dependent on the species formed in solution.     

Olefin cis-dihydroxylation versus epoxidation by non-heme iron catalysts: two faces of an Fe(III)-OOH coin

The oxygenation of carbon-carbon double bonds by iron enzymes generally results in the formation of epoxides, except in the case of the Rieske dioxygenases, where cis-diols are produced. Herein we report a systematic study of olefin oxidations with H(2)O(2) catalyzed by a group of non-heme iron complexes, i.e., [Fe(II)(BPMEN)(CH(3)CN)(2)](2+) (1, BPMEN = N,N'-dimethyl-N,N'-bis(2-pyridylmethyl)-1,2-diaminoethane) and [Fe(II)(TPA)(CH(3)CN)(2)](2+) (4, TPA = tris(2-pyridylmethyl)amine) and their 6- and 5-methyl-substituted derivatives. We demonstrate that olefin epoxidation and cis-dihydroxylation are different facets of the reactivity of a common Fe(III)-OOH intermediate, whose spin state can be modulated by the electronic and steric properties of the ligand environment. Highly stereoselective epoxidation is favored by catalysts with no more than one 6-methyl substituent, which give rise to low-spin Fe(III)-OOH species (category A). On the other hand, cis-dihydroxylation is favored by catalysts with more than one 6-methyl substituent, which afford high-spin Fe(III)-OOH species (category B). For catalysts in category A, both the epoxide and the cis-diol product incorporate (18)O from H(2)(18)O, results that implicate a cis-H(18)O-Fe(V)=O species derived from O-O bond heterolysis of a cis-H(2)(18)O-Fe(III)-OOH intermediate. In contrast, catalysts in category B incorporate both oxygen atoms from H(2)(18)O(2) into the dominant cis-diol product, via a putative Fe(III)-eta(2)-OOH species. Thus, a key feature of the catalysts in this family is the availability of two cis labile sites, required for peroxide activation. The olefin epoxidation and cis-dihydroxylation studies described here not only corroborate the mechanistic scheme derived from our earlier studies on alkane hydroxylation by this same family of catalysts (Chen, K.; Que, L, Jr. J. Am. Chem. Soc. 2001, 123, 6327) but also further enhance its credibility. Taken together, these reactions demonstrate the catalytic versatility of these complexes and provide a rationale for Nature's choice of ligand environments in biocatalysts that carry out olefin oxidations.     

Novel iron(III) complexes of sterically hindered 4N ligands: regioselectivity in biomimetic extradiol cleavage of catechols

The iron(III) complexes of the 4N ligands 1,4-bis(2-pyridylmethyl)-1,4-diazepane (L1), 1,4-bis(6-methyl-2-pyridylmethyl)-1,4-diazepane (L2), and 1,4-bis(2-quinolylmethyl)-1,4-diazepane (L3) have been generated in situ in CH 3CN solution, characterized as [Fe(L1)Cl 2] (+) 1, [Fe(L2)Cl 2] (+) 2, and [Fe(L3)Cl 2] (+) 3 by using ESI-MS, absorption and EPR spectral and electrochemical methods and studied as functional models for the extradiol cleaving catechol dioxygenase enzymes. The tetrachlorocatecholate (TCC (2-)) adducts [Fe(L1)(TCC)](ClO 4) 1a, [Fe(L2)(TCC)](ClO 4) 2a, and [Fe(L3)(TCC)](ClO 4) 3a have been isolated and characterized by elemental analysis, absorption spectral and electrochemical methods. The molecular structure of [Fe(L1)(TCC)](ClO 4) 1a has been successfully determined by single crystal X-ray diffraction. The complex 1a possesses a distorted octahedral coordination geometry around iron(III). The two tertiary amine (Fe-N amine, 2.245, 2.145 A) and two pyridyl nitrogen (Fe-N py, 2.104, 2.249 A) atoms of the tetradentate 4N ligand are coordinated to iron(III) in a cis-beta configuration, and the two catecholate oxygen atoms of TCC (2-) occupy the remaining cis positions. The Fe-O cat bond lengths (1.940, 1.967 A) are slightly asymmetric and differ by 0.027 A only. On adding catecholate anion to all the [Fe(L)Cl 2] (+) complexes the linear tetradentate ligand rearranges itself to provide cis-coordination positions for bidentate coordination of the catechol. Upon adding 3,5-di- tert-butylcatechol (H 2DBC) pretreated with 1 equiv of Et 3N to 1- 3, only one catecholate-to-iron(III) LMCT band (648-800 nm) is observed revealing the formation of [Fe(L)(HDBC)] (2+) involving bidentate coordination of the monoanion HDBC (-). On the other hand, when H 2DBC pretreated with 2 equiv of Et 3N or 1 or 2 equiv of piperidine is added to 1- 3, two intense catecholate-to-iron(III) LMCT bands appear suggesting the formation of [Fe(L)(DBC)] (+) with bidentate coordination of DBC (2-). The appearance of the DBSQ/H 2DBC couple for [Fe(L)Cl 2] (+) at positive potentials (-0.079 to 0.165 V) upon treatment with DBC (2-) reveals that chelated DBC (2-) in the former is stabilized toward oxidation more than the uncoordinated H 2DBC. It is remarkable that the [Fe(L)(HDBC)] (2+) complexes elicit fast regioselective extradiol cleavage (34.6-85.5%) in the presence of O 2 unlike the iron(III) complexes of the analogous linear 4N ligands known so far to yield intradiol cleavage products exclusively. Also, the adduct [Fe(L2)(HDBC)] (2+) shows a higher extradiol to intradiol cleavage product selectivity ( E/ I, 181:1) than the other adducts [Fe(L3)(HDBC)] (2+) ( E/ I, 57:1) and [Fe(L1)(HDBC)] (2+) ( E/ I, 9:1). It is proposed that the coordinated pyridyl nitrogen abstracts the proton from chelated HDBC (-) in the substrate-bound complex and then gets displaced to facilitate O 2 attack on the iron(III) center to yield the extradiol cleavage product. In contrast, when the cleavage reaction is performed in the presence of a stronger base like piperidine or 2 equiv of Et 3N a faster intradiol cleavage is favored over extradiol cleavage suggesting the importance of bidentate coordination of DBC (2-) in facilitating intradiol cleavage.     

Synthesis, structure, and properties of an Fe(II) carbonyl [(PaPy3)Fe(CO)](ClO4): insight into the reactivity of Fe(II)-CO and Fe(II)-NO moieties in non-heme iron chelates of N-donor ligands

An Fe(II) carbonyl complex [(PaPy3)Fe(CO)](ClO4) (1) of the pentadentate ligand N,N-bis(2-pyridylmethyl)amine-N-ethyl-2-pyridine-2-carboxamide (PaPy3H, H is the dissociable amide proton) has been synthesized and structurally characterized. This Fe(II) carbonyl exhibits its nu(CO) at 1972 cm(-1), and its 1H NMR spectrum in degassed CD3CN confirms its S = 0 ground state. The bound CO in 1 is not photolabile. Reaction of 1 with an equimolar amount of NO results in the formation of the {Fe-NO}7 nitrosyl [(PaPy3)Fe(NO)](ClO4) (2), while excess NO affords the iron(III) nitro complex [(PaPy3)Fe(NO2)](ClO4) (5). In the presence of [Fe(Cp)2]+ and excess NO, 1 forms the {Fe-NO}6 nitrosyl [(PaPy3)Fe(NO)](ClO4)2 (3). Complex 1 also reacts with dioxygen to afford the iron(III) mu-oxo species [{(PaPy3)Fe}2O](ClO4)2 (4). Comparison of the metric and spectral parameters of 1 with those of the previously reported {Fe-NO}6,7 nitrosyls 3 and 2 provides insight into the electronic distributions in the Fe(II)-CO, Fe(II)-NO, and Fe(II)-NO+ bonds in the isostructural series of complexes 1-3 derived from a non-heme polypyridine ligand with one carboxamide group.     

From one-dimensional chain to pentanuclear molecule. Magnetism of cyano-bridged Fe(III)-Ni(II) complexes

Two cyano-bridged Ni(II)-Fe(III) complexes [(H(3)O)[Ni(H(2)L)](2)[Fe(CN)(6)](2).[Fe(CN)(6)].6H(2)O](n) (1) and [K(18-C-6)(H(2)O)(2)][Ni(H(2)L)](2)[Fe(CN)(6)](3).4(18-C-6).20H(2)O (2) (L = 3,10-bis(2-aminoethyl)-1,3,6,8,10,12-hexaazacyclotetradecane, 18-C-6 = 18-crown-6-ether) have been synthesized and characterized structurally and magnetically. Complex 1 has a zigzag one-dimensional structure, in which two trans-CN(-) ligands of each [Fe(CN)(6)](3)(-) link two trans-[Ni(H(2)L)](4+) groups, and in turn, each trans-[Ni(H(2)L)](4+) links two [Fe(CN)(6)](3)(-) in a trans fashion. Complex 2 is composed of cyano-bridged pentanuclear molecules with moieties connected by the trans-CN(-) ligands of [Fe(CN)(6)](3)(-). Magnetic studies show the existence of ferromagnetic Ni(II)-Fe(III) interactions in both complexes. The intermetallic magnetic coupling constant of both complexes was analyzed by using an approximate model on the basis of the structural features.     

Supramolecular spin-crossover iron complexes based on imidazole-imidazolate hydrogen bonds

The [Fe(II)(H(3)L)](BF(4))(2).3H(2)O (1) complex was synthesized, where H(3)L (tris[[2-[(imidazole-4-yl)methylidene]amino]ethyl]amine) is a tripodal ligand obtained by condensation of tris(2-aminoethyl)amine and 4-formylimidazole (fim) in a 1:3 molar ratio. Starting from 1, a series of complexes, [Fe(II)(H(1.5)L)](BF(4))(0.5) (2) (=[Fe(II)(H(3)L)][Fe(II)(L)]BF(4)), [Fe(H(1.5)L)]BF(4) (3) (=[Fe(II)(H(3)L)][Fe(III)(L)](BF(4))(2)), [Fe(III)(H(3)L)](BF(4))(3).fim.H(2)O (4), and [Fe(III)(L)].2.5H(2)O (5), has been synthesized and characterized. The single-crystal X-ray structure of each complex has been determined. The Fe(II) compound, 2, and a mixed valence Fe(II)-Fe(III) compound, 3, involve formally hemi-deprotonated ligands, H(1.5)L. The structure of 3 consists of a homochiral two-dimensional assembled sheet, arising from the intermolecular hydrogen bonds between [Fe(II)(H(3)L)](2+) and [Fe(III)(L)](0) (3). All but 5 exhibit spin crossover between low-spin (LS) and high-spin (HS) states. This is a rare case where both Fe(II) and Fe(III) complexes containing the same ligand exhibit spin-crossover behavior. Magnetic susceptibility and M?ssbauer studies showed that 3 has three accessible electronic states: LS Fe(II)-LS Fe(III), HS Fe(II)-LS Fe(III), and HS Fe(II)-HS Fe(III). Compounds 1-3 show the light-induced excited spin-state trapping effect at the Fe(II) sites upon irradiation with green light. The solution magnetic properties, electronic spectra, and electrochemical properties of 1, 4, and 5 were also studied.     

On [Fe4S4]2+ -(mu2-SR)-M II bridge formation in the synthesis of an A-cluster analogue of carbon monoxide dehydrogenase/acetylcoenzyme A synthase

The construction of a synthetic analogue of the A-cluster of carbon monoxide dehydrogenase/acetylcoenzyme synthase, the site of acetylcoenzyme A formation, requires as a final step the formation of an unsupported [Fe(4)S(4)]-(mu(2)-SR)-Ni(II) bridge to a preformed cluster. Our previous results (Rao, P. V.; Bhaduri, S.; Jiang, J.; Holm, R. H. Inorg. Chem. 2004, 43, 5833) and the work of others have addressed synthesis of dinuclear complexes relevant to the A-cluster. This investigation concentrates on reactions pertinent to bridge formation by examining systems containing dinuclear and mononuclear Ni(II) complexes and the 3:1 site-differentiated clusters [Fe(4)S(4)(LS(3))L'](2-) (L' = TfO(-) (14), SEt (15)). The system 14/[{Ni(L(O)-S(2)N(2))}M(SCH(2)CH(2)PPh(2))](+) results in cleavage of the dinuclear complex and formation of [{Ni(L(O)-S(2)N(2))}Fe(4)S(4)(LS(3))]- (18), in which the Ni(II) complex binds at the unique cluster site with formation of a Ni(mu(2)-SR)(2)Fe bridge rhomb. Cluster 18 and the related species [{Ni(phma)}Fe(4)S(4)(LS(3))](3)- (19) are obtainable by direct reaction of the corresponding cis-planar Ni(II)-S(2)N(2) complexes with 14. The mononuclear complexes [M(pdmt)(SEt)]- (M = Ni(II), Pd(II)) with 14 in acetonitrile or Me(2)SO solution react by thiolate transfer to give 15 and [M(2)(pdmt)(2)]. However, in dichloromethane the Ni(II) reaction product is interpreted as [{Ni(pdmt)(mu(2)-SEt)}Fe(4)S(4)(LS(3))](2-) (20). Reaction of Et(3)NH(+) and 15 affords the double cubane [{Fe(4)S(4)(LS(3))}(2)(mu(2)-SEt)](3-) (21). Cluster 18 contains two mutually supportive Fe-(mu(2)-SR)-Ni(II) bridges, 19 exhibits one strong and one weaker bridge, 20 has one unsupported bridge (inferred from the (1)H NMR spectrum), and 21 has one unsupported Fe-(mu(2)-SR)-Fe bridge. Bridges in 18, 19, and 21 were established by X-ray structures. This work demonstrates that a bridge of the type found in the enzyme A-clusters is achievable by synthesis and implies that more stable, unsupported single thiolate bridges may require reinforcement by an additional covalent linkage between the Fe(4)S(4) and nickel-containing components. (LS(3) = 1,3,5-tris((4,6-dimethyl-3-mercaptophenyl)thio)-2,4,6-tris(p-tolylthio)benzene(3-); L(O)-S(2)N(2) = N,N'-diethyl-3,7-diazanonane-1,9-dithiolate(2-); pdmt = pyridine-2,6-methanedithiolate(2-); phma = N,N'-1,2-phenylenebis(2-acetylthio)acetamidate(4-); TfO = triflate.).     

Theoretical study of the magnetic behavior of [Fe8] and [Fe16] wheels

The reaction of the trimetallic species [Fe(3)O(PhCOO)(6)(H(2)O)(3)]NO(3) with 1,1,1-tris(hydroxymethyl)ethane (H(3)thme) affords either the octametallic species [Fe(8)(PhCOO)(12)(thme)(4)] 1 or the hexadecametallic species [Fe(16)(EtO)(4)(PhCOO)(16)(Hthme)(12)](NO(3))(4) 2, depending on the nature of the solvent used for crystallization. The structure of 1 can be described as a nonplanar wheel of eight Fe(III) ions bridged by a combination of PhCOO(-) and thme(3)(-) ligands, and 2 as a nonplanar wheel of sixteen Fe(III) ions bridged by PhCOO(-), Hthme(2)(-), and EtO(-) ligands. Both compounds can be broken down into simple units of two metal ions and the bridging ligands that connect them. The best fits of the chi vs T curves in the 300-10 K temperature range were obtained with the parameters g = 2.0, J(1) = -24.0 cm(-1), and J(2) = -8.59 cm(-1) for [Fe(8)] and g = 2.0, J(1) = -25.0 cm(-1), J(2) = -11.73 cm(-1), and J(3) = -69.3 cm(-1) for [Fe(16)]. Density functional theory (DFT) calculations show that the antiferromagnetic interactions between the metals in the dinuclear units decrease when two types of bridging ligands are present, as expected for an orbital counter-complementarity effect.     

Initial members of the family of molecular mid-valent high-nuclearity iron nitrides: [Fe4N2X10]4- and [Fe10N8X12]5- (X = Cl-, Br-)

Current theoretical and experimental evidence points toward X = N as the identity of the interstitial atom in the [MoFe7S9X] core of the iron-molybdenum cofactor cluster of nitrogenase. This atom functions with mu6 bridging multiplicity to six iron atoms and, if it is nitrogen as nitride, raises a question as to the existence of a family of molecular iron nitrides of higher nuclearity than known dinuclear Fe(III,IV) species with linear [Fe-N-Fe]5+,4+ bridges. This matter has been initially examined by variation of reactant stoichiometry in the self-assembly systems [FeX4]1-/(Me3Sn)3N (X = Cl-, Br-) in acetonitrile. A 2:1 mol ratio affords [Fe4N2Cl10]4- (1), isolated as the Et4N+ salt (72%). This cluster has idealized C2h symmetry with a planar antiferromagnetically coupled [Fe(III)4(mu3-N)2]6+ core containing an Fe2N2 rhombus to which are attached two FeCl3 units. DFT calculations have been performed to determine the dominant magnetic exchange pathway. An 11:8 mol ratio leads to [Fe10N8Cl12]5- (3) as the Et4N+ salt (37%). The cluster possesses idealized D2h symmetry and is built of 15 edge- and vertex-shared rhomboids involving two mu3-N and six mu4-N bridging atoms, and incorporates two of the core units of 1. Four FeN2Cl2 and four FeN3Cl sites are tetrahedral and two FeN5 sites are trigonal pyramidal. The cluster is mixed-valence (9Fe(III) + Fe(IV)); a discrete Fe(IV) site was not detected by crystallography or M?ssbauer spectroscopy. The corresponding clusters [Fe4N2Br10]4- and [Fe10N8Br12]5- are isostructural with 1 and 3, respectively. Future research is directed toward defining the scope of the family of molecular iron nitrides.     

Potentiometric determination of bromate using an Fe(III)-Fe(II) potential buffer by circulatory flow-injection analysis.

A method for the potentiometric determination of bromate by circulatory flow injection analysis (CFIA) is described. The procedure involves the use of an Fe(III)-Fe(II) potential buffer solution, which is recycled via a reservoir. The analytical method is based on a linear relationship between the concentration of bromate and a very transient potential change in the electrode potential due to the generation of intermediate bromine during the reaction of bromate with the Fe(III)-Fe(II) potential buffer solution, which also contains NaBr, (NH4)6Mo7O24 and H2SO4. An aliquot (5 microl) of a bromate sample solution was injected into the stream of the potential buffer solution, 100 ml of which was circulated at a flow rate of 1 ml/min; the potential buffer solution stream was then returned to the reservoir after passing through a flow-through redox electrode detector. A potential change due to the reaction of the injected sample with the potential buffer in a reaction coil was measured with the detector in the form of a peak signal. The effects of the bromide, sulfuric acid and Fe(III)-Fe(II) concentrations in the potential buffer, and length of the reaction coil on the peak heights were examined in order to optimize the proposed CFIA method. The analytical sensitivities to bromate were 5.6 mV/microM for 1 x 10(-2) M and 30.9 mV/microM for 1 x 10(-3) M in the concentration of Fe(III)-Fe(II) in a potential buffer solution containing 0.35 M NaBr, 0.2% (NH4)6Mo7O24 and 1 M H2SO4. The detection limit of bromate obtained by a 1 x 10(-3) M Fe(III)-Fe(II) potential buffer solution was 0.02 microM (2.5 ppb). The numbers of repetitive determinations in which the relative sensitivities within 5% were regarded as being tolerated were ca. 4000 and 2000 for the use of only 100 ml of 1 x 10(-2) M and 1 x 10(-3) M Fe(III)-Fe(II) potential buffer solution, respectively.