Direct spectrofluorimetric determination of glutathione in biological samples using 5-maleimidyl-2-(m-methylphenyl) benzoxazole

A new thiol fluorescence probe, 5-maleimidyl-2-(m-methylphenyl)benzoxazole (MMPB) has been developed for the direct determination of reduced glutathione (GSH) in real samples. Compared to the reported N-substituted maleimide type of thiol reagents, the main advantage of MMPB is its rather high selectivity for GSH to cysteine (Cys), which often coexists with GSH in biological samples. Under mild conditions similar to the physiological environment, MMPB reacted with GSH to give a highly fluorescent derivative with the excitation and emission wavelengths of 299.2 and 355.8 nm, respectively. In the presence of 0.40-fold (molar ratio) of Cys, a linear relationship was found in the range of 0-1.62×10⁻⁷ mol l⁻¹ with the detection limit (3σ) of 3.23×10⁻¹⁰ mol l⁻¹ for GSH determination. Many other amino acids (100-fold) did not interfere with the determination. Since the molar ratio of Cys to GSH in mammalian tissues and blood does not exceed the value of 0.40:1, the proposed method has been used in the direct determination of GSH in these kinds of biological samples, such as human blood, pig’s liver and heart with the recoveries of 94.3-104.5%     

Spectrofluorimetric determination of thiols by use of N[P-(2-benzoxazolyl)phenyl]maleimide

The weak fluorescence of N-[P-(2-benzoxazolyl)phenyl]maleimide (BOPM) can be greatly enhanced by thiol-containing compounds. A sensitive and simple spectrofluorimetric method based on the use of BOPM has been developed for the determination of thiols such as cysteine (Cys) and reduced glutathione (GSH). Calibration plots were linear in the concentration range from 0 to 1.6 x 10(-7) mol L(-1) for Cys and 0 to 1.7 x 10(-7) mol L(-1) for GSH. The detection limits (3a) were 2.36 x 10(-10) mol L(-1) for Cys and 1.49 x 10(-10) mol L(-1) for GSH. Many other amino acids (present at 100-fold greater concentrations) did not interfere with the determination. The proposed method has been used for the determination of Cys in protein hydrolysate and cystine electrolyte or GSH in serum, with recoveries of 95.4-103.7%.     

Voltammetric copper(II) determination with a montmorillonite-modified carbon paste electrode

The clay mineral montmorillonite has been tested as modifier for the carbon paste electrode with a novel electrode modification technique. The differential pulse voltammetric determination of copper(II) by means of this modified carbon paste electrode has been studied. A detection limit of 4x10(-8) mol/l has been achieved after 10 min preconcentration under open circuit conditions with subsequent anodic stripping voltammetry. The calibration curve for Cu(II) is linear in the range of 4x10(-8)-8x10(-7) mol/l. Pb interferes in a 10-fold molar and Cd and Hg in a 100-fold molar excess. The interference by humic ligands is significant.     

Flotation-spectrophotometric determination of trace of germanium with isochromatic dye ion-pairs formed by rhodamine 6G and tetrabromofluorescein

A flotation spectrophotometric method for the determination of germanium with isochromatic dye ion-pairs is described. The molar ratio of germanium to rhodamine 6G to tetrabromofluorescein is 1:5:5. The apparent molar absorptivity is 5.8 x 10(5) l mol(-1) cm(-1) at 531 nm. Beer's law is obeyed over the concentration range of 5.0 x 10(-8)-1.25 x 10(-6) mol l(-1). The proposed method is sensitive and accuracy and can be applied satisfactorily to the determination of germanium in vegetables.     

Determination of nickel with 2-(2-quinolylazo)-5-diethylaminoaniline as a chromogenic reagent.

A sensitive, selective and rapid method for the determination of nickel based on a rapid reaction of nickel(II) with 2-(2-quinolylazo)-5-diethylaminoaniline (QADEAA) has been developed. In the presence of pH = 6.0 ammonia-ammonium chloride buffer solution and sodium dodecyl sulfonate (SDS) medium, QADEAA reacts with nickel to form a violet complex having a molar ratio of 1:2 (nickel to QADEAA). The molar absorptivity of the complex is 1.38 x 10(5) l mol(-1) cm(-1) at 595 nm. Beer's law is obeyed in the range of 0.01-0.4 microg/ml. This method had been applied to the determination of nickel with good results.     

Studies on properties and application of non-protected room temperature phosphorescence of propranolol

A direct and simple non-protected room temperature phosphorimetry (NP-RTP) for determine propranolol, which using I- as a heavy atom perturber and sodium sulfite as a deoxygenator, has been developed. The phosphorescence peak wavelength maxima lambda(ex)/lambda(em) = 288/494, 522 nm. The analytical curve of propranolol gives a linear dynamic range of 8.0 x 10(-8)-2.0 x 10(-5) mol l(-1) and a detection limit of 3 x 10(-8) mol l(-1). The influence of I- concentration on RTP lifetime of propranolol was studied and the luminescence kinetic parameters were calculated. It is found that the relation between I- concentration (x) and RTP lifetime (tau) can be expressed as tau = 1.25e(-0.477x) and the rate constants of phosphorescence emission k(p) was 0.800 per ms. The method was applied directly to determination of propranolol in urine and drug tablets with a satisfactory result. The recoveries were 96.6-97.4% and the relative standard deviation was 2% for the 1.00 x 10(-6)-4.00 x 10(-6) mol l(-1) propranolol in spiked urine sample.     

Extractive-spectrophotometric determination of molybdenum as an ion-association complex with thiocyanate and adogen

A selective and sensitive method is described for the determination of trace amounts of molybdenum, based on its reaction with thiocyanate and its extraction (into toluene) as an ion-association complex formed with adogen (methyltrioctylammonium chloride). The molar absorptivity is 2.13 x 10(4) l.mole(-1).cm(-1) at lambda(max) 467 nm. The method has been applied to molybdenum determination in steels.     

Determination of ruthenium and osmium in each other's presence in chloride solutions by direct and third-order derivative spectrophotometry

Ruthenium and osmium (up to 20 mug Ru(Os) ml(-1)) can be determined in chloride solutions directly after absorption of RuO(4) and OsO(4) in hydrochloric acid. In 9 M HCl, RuO(4) and OsO(4) are quantitatively converted into RuCl(6)(2-) (lambda(max) = 480.0 nm, epsilon = 4.8 x 10(3) l mol(-1) cm(-1)) and OsCl(6)(2-) (lambda(max) = 334.8 nm, epsilon = 8.4 x 10(3) l mol(-1) cm(-1)) respectively. Osmium does not interfere with the determination of ruthenium in the form of the RuCl(6)(2-) complex by direct spectrophotometry. The absorbance of the obtained solution at lambda(max) = 480.0 nm corresponds only to the concentration of ruthenium. A derivative spectrophotometric method using numerical calculation of absorption spectra of the RuCl(6)(2-) and OsCl(6)(2-) complexes has been developed for the determination of osmium in a mixture with ruthenium. The interfering effect of ruthenium on the determination of osmium can be eliminated by measuring the value of a third-order derivative spectrum of the OsCl(6)(2-) complex at 350.0 nm ("zero-crossing point" of ruthenium). Simple and rapid determination of ruthenium and osmium in a calibration standard solution of the noble metals (Ru, Rh, Pd, Os, Ir, Pt and Au) for plasma spectroscopy using the proposed methods has been achieved.     

Spectrofluorometric determination of trace amounts of coenzyme II using norfioxacin-terbium complex as a fluorescent probe.

When terbium ion (Tb3+)-norfloxacin (NFLX) complex is issued a fluorescent probe, in a buffer solution of pH = 7.6, NADP can remarkably enhance the fluorescence intensity of the Tb3+ -NFLX complex at lambda = 545 nm. The enhanced fluorescence intensity of Tb3+ is in proportion to the concentration of NADP. The dynamic range for the determination of NADP is 1.11 x 10(-7) - 6.16 x 10(-5) mol l(-1), with a detection limit of 4.31 x 10(-8) mol l(-1). This method is simple, practical and relatively free of interference from coexisting substances, so it can be successfully applied to determination of NADP in synthetic water samples.     

Non-extraction batchwise and FIA determination of cationic and nonionic surfactants using Cu(II)-chromazurol S-surfactant complexes

Batchwise and FIA determinations have been developed for cationic and nonionic surfactants, based on the formation of ternary Cu(II)-chromazurol S-surfactant compounds. Optimum reaction conditions have been found (pH 8.0, lambda=590 and 630 nm, respectively). For the batchwise measurement, the molar absorption coefficient values epsilon(590)=5.1-5.7x10(4) l mol(-1) cm(-1) for cationic surfactants, epsilon(630)=0.7-1.5x10(4) l mol(-1) cm(-1) for nonionic surfactants. A factorial design has been carried out to determine the optimum flow conditions. Calibration curves were constructed and statistically evaluated for both the batchwise and FIA determination. For example, the linear concentration ranges for batch determination of the cationic surfactant cetyltrimethylammonium bromide and nonionic surfactant Marlophen NP 10 are 0-15 mug ml(-1) (R=0.9996, R.S.D.=6.62-0.64%) and 13-53 mug ml(-1) (R=0.9993, R.S.D.=4.48-1.40%), respectively; the respective detection limits are 0.02 and 4.0 mug ml(-1). For FIA determination of the same surfactants, the linear concentration ranges are 0-13 mug ml(-1) (R=0.9995, R.S.D.=4.44-0.49%) and 66-397 mug ml(-1) (R=0.9994, R.S.D.=8.92-1.12%), respectively, detection limits are 0.08 and 38 mug ml(-1), respectively.     

Highly sensitive spectrofluorimetric determination of trace amounts NADP using Europium ion-doxycycline complex probe

A new spectrofluorimetric method was developed for determination of trace amount of Coenzyme II (NADP). Using europium ion-doxycycline (DC) as a fluorescent probe, in the buffer solution of pH 8.44, NADP can remarkably enhance the fluorescence intensity of the Eu(3+)-DC complex at lambda=612 nm and the enhanced fluorescence intensity is in proportion to the concentration of NADP. Optimum conditions for the determination of NADP were also investigated. The dynamic range for the determination of NADP is 3.3 x 10(-7) to 6.1 x 10(-6) mol l(-1) with detection limit of 6.8 x 10(-8) mol l(-1). This method is simple, practical and relatively free interference from coexisting substances and can be successfully applied to determination of NADP in synthetic water samples and in serum samples. Moreover, the enhancement mechanisms of the fluorescence intensity in the Eu(3+)-DC system and the Eu(3+)-DC-NADP system have been also discussed.     

Flow injection spectrophotometric analysis of lead in human saliva for monitoring environmental pollution

A new highly sensitive, simple and low-cost methodology for the direct determination of Pb (II) with 2-(5-bromo-2-pyridylazo)-5-dimethylaminophenol in ethanolic medium has been developed. The absorption spectroscopy of the complex has been examined in detail, and the chemical variables affecting the sensitivity of procedure studied, optimized and applied to the determination of trace amounts of lead in human saliva. Under the optimal experimental conditions, a precision of 1.61x10(-4) mug cm(-2) was achieved, the molar absorptivity being (epsilon) 5.6x10(4) l mol(-1) cm(-1). An FI technique is proposed, and it is possible to determine trace levels of lead by injection into a steam buffered at pH 7.15, containing 70% ethanol: 30% Tris buffer 3.5x10(-3) mol l(-1) (pH=7.2), 1x10(-4) mol l(-1) 5-BrDMPAP. The FIA configuration allows the analysis of 45 samples per hour. The lower limit of detection (LOD) was 1x10(-7) mol l(-1). The calibration plot was linear at least within two orders of magnitude of lead concentration. The use of an HPLC pump for the FI analysis led to a substantial improvement in the analytical performance of the method, which clearly satisfies the typical requirements for control processes.     

Rapid flow injection spectrophotometric determination of monofluorophosphates in toothpastes after on-line hydrolysis by alkaline phosphatase immobilized on a cellulose nitrate membrane

A new, rapid flow injection (FI) method is reported for the spectrophotometric determination of monofluorophosphate (MFP) ions in toothpastes. MFP ions are hydrolyzed on-line by alkalinephosphatase (APase) immobilized on a cellulose nitrate membrane, prior to injection in the FI system. The yielded orthophosphate ions are determined spectrophotometrically (lambda(max) = 690 nm) using the molybdenum blue approach. The chemical and FI variables that affected the enzymatic reaction were studied and optimized. A study of interferences was also carried out. The proposed method is very precise (s(r) = 0.7% at 1.0 x 10(-4) mol l(-1) MFP, n = 12), fast (sampling rate of 72 h(-1)) and allows the determination of MFP ions in the range of 4.0 x 10(-5) to 6.0 x 10(-4) mol l(-1) with a satisfactory 3sigma detection limit of 4.0 x 10(-6) mol l(-1). The application of the proposed FI method to toothpaste samples yielded accurate results (e(r) < 2.0%) compared with a potentiometric reference procedure.     

Electrochemiluminescent determination of L-cysteine with a flow-injection analysis system.

A flow-injection electrochemiluminescent method for L-cysteine determination has been developed based on its enhancement of the electrochemiluminecence of luminol at a glassy carbon electrode. This method is simple and sensitive for cysteine determination. Under the selected experimental parameters, the linear range for cysteine concentration was 1.0 x 10(-6) - 5.0 x 10(-5) mol/l, and the detection limit was 0.67 micromol/l (S/N = 3). The relative standard deviation for 11 measurements of 1.0 x 10(-5) mol/l cysteine was 4.5%. The proposed method has been applied to the detection of cysteine in pharmaceutical injections with satisfactory results.     

Spectrophotometric determination of trace molybdenum in plants and seeds with 3,5-dibromo-4-hydroxyphenylflurone

A novel spectrophotometric method based on a new reagent, 3,5-dibromo-4-hydroxyphenylflurone, was developed for the determination of molybdenum in plants and seeds. 3,5-Dibromo-4-hydroxyphenylflurone showed outstanding analytical characteristics for spectrophotometric determination of molybdenum. The reaction conditions are simple and stable. In 0.2 mol l(-1) phosphoric acid medium (which can combine with iron and other metal ions and greatly improves the selectivity of the color system), molybdenum(VI) reacts with 3,5-dibromo-4-hydroxyphenylflurone to form a 1:2 red complex with an absorption maximum at 530 nm, the color reaction can completed in 2 min and the absorbance of the molybdenum complex remains stable for at least 72 h at room temperature. Its stability constant is 1.21 x 10(28) at 25 degrees C. Beer's law is obeyed over the range 0-0.6 microg ml(-1) Mo(VI). The reagent has very high sensitivity and selectivity; the molar absorptivity of the complex is 1.35 x 10(5) 1 mol(-1) cm(-1) and the limit of quantification, the limit of detection and relative standard deviation (n = 10) were found to be 6.7 ng ml(-1), 2.2 ng ml(-1) and 1.01%, respectively. Cu (50000-fold), Fe (20000-fold), K (20000-fold), NH4+ (20000-fold), Mg (15000-fold), Zn (10000-fold), Na (10000-fold), Al (4000-fold), Ca (25000-fold), Mn (2000-fold), Ce (500-fold), Cr (400-fold) and Bi (200-fold) do not interfere with the determination of trace levels of molybdenum up to the excesses indicated. The selectivity is much superior to that of other published methods. The proposed method was applied to the direct determination of molybdenum in plants and seeds with satisfactory results. The synthesis of the reagent and conditions of color reaction were studied in detail.     

A highly sensitive colour reaction for Se(IV) with the iodide-rhodamine B-PVA system Spectrophotometric determination of trace amounts of selenium in water

A highly sensitive spectrophotometric method for determination of selenium(IV) has been developed, based on Se(IV) oxidation of I(-) to I(-)(3) in a weak-acid medium, then formation of the 1:1 ion-association complex of I(-)(3) with Rhodamine B in the presence of poly(vinyl alcohol). The molar absorptivity is 1.97 x 10(5)l.mole(-1).cm(-1). Preconcentration of Se(IV) and elimination of interfering ions is achieved by an improved thiol cotton method, so the determination has very good selectivity. Se(IV) at mug/l. levels in tap water, hot-spring water and river water has been satisfactorily determined by the method.     

A fluorescence quenching method for the determination of nitrite with Rhodamine 110

A simple and sensitive fluorescence quenching method for the determination of trace nitrite has been developed. The method is based on the reaction of Rhodamine 110 with nitrite in acidic medium to form a new compound, which has much lower fluorescence. The optimum experimental conditions were studied. The linear range was obtained at a nitrite concentration of 1.0 x 10(-8)-3.0 x 10(-7)mol l(-1) with a detection limit of 7.0 x 10(-10) mol l(-1) (S/N=3). The proposed method has been successfully applied to the determination of nitrite in tap water and lake water without extraction.     

Spectrophotometric determination of rhenium with dithio-oxamide in strongly alkaline medium

The interaction between rhenium(VII) and dithio-oxamide in strongly alkaline medium in presence of tin(II) chloride as reluctant has been studied. A purple complex is obtained, with lambda(max) 526 nm and (max) = 4.0 x 10(3) l.mole(-1).cm(-1). The reaction has been applied to the determination of rhenium in tungsten-rhenium alloy after its anodic electrochemical dissolution in alkaline medium. A 1000-fold excess of molybdenum or tungsten does not interfere. A modification of the proposed method can be used as a spot-test for rapid control of rhenium content in industrial solutions.     

Non-extractive derivative spectrophotometric determination of cobalt in neutral micellar medium

A sensitive derivative spectrophotometric method using 1-nitroso-2-naphthol has been developed for determination of trace amounts of cobalt in the presence of a neutral surfactant. Photometric parameters, viz., lambda(max), molar absorption coefficient and analytical sensitivity of the complex formed in micellar media are 420 nm, 3.18x10(4) l mol(-1) cm(-1) and 2.05 ng ml(-1), respectively. Beer's law holds from 0.20 to 3.0 mug ml(-1) of the analyte concentration. The method has a high sensitivity with a detection limit of 1.68 ng ml(-1). A selective determination of cobalt in presence of copper(II) or iron(III) using derivative spectral profiles and without any masking or pre-separation is also reported. Samples of drugs and standard alloys analysed by the proposed method yielded results comparable to those obtained using recommended procedures.     

Spectrophotometric determination of thorium in standard samples and monazite sands based on the floated complex of thorium with N-hydroxy-N,N′-diphenylbenzamidine and thorin

A selective and sensitive spectrophotometric method for the determination of Th(IV) has been based on the reaction with thorin and subsequent extraction of the red-orange coloured complex with N-hydroxy-N,N'-diphenylbenzamidine (HDPBA) in benzene as floated complex at pH 2.2. The complex in ethanol exhibits a maximum absorbance at 495 nm, with a molar absorptivity of 6.0x10(4) l mol(-1) cm(-1), with a Sandell's sensitivity of 3.9x10(-3) microg cm(-2). The method follows Beer's law up to 3.0 microg Th(IV) ml(-1). None of the common cations and anions tested interfere. The detection limit of the method is 0.04 microg Th(IV) ml(-1), the RSD (n=10) is 1.4%. The method has been successfully employed for the determination of thorium in various standard and monazite samples.