Synthesis of some pyrimido[4′,5′:4,5]thieno[2,3-b]quinolines and related heterocycles

Several thieno[2,3-b]quinolines 6a-i have been synthesized. These compounds were used as key intermediates in the synthesis of oxazino[4′,5′:4,5]thieno[2,3-b]quinoline 8 , pyrimido[4′,5′:4,5]-thieno[2,3-b]quinolines 9–12 , triazino[4′,5′:4,5]thieno[2,3-b] quinolines 14 and imidazo[4′,5′:4,5]-thieno[2,3-b]quinolines 17 .     

Reaction of thieno[2,3-b]pyridines with sodium hypochlorite: An unusual and stereoselective one-pot approach to dimeric pyrrolo[2′,3′:4,5]thieno[2,3-b]pyridines

The oxidation of 3-aminothieno[2,3-b]pyridine-2-carboxamides with commercially available bleach leads to the formation of dimeric pyrrolo[2′,3′:4,5]thieno[2,3-b]pyridines (7a,14a-diamino-7,14-bis(aryl)-7,7a,14,14a-tetrahydro-6H,13H-pyrido[3″″,2″″:4?,5?]thieno[2?,3?:4″,5″]pyrrolo-[3″,4″:3′,4′]pyrrolo[2′,3′:4,5]thieno[2,3-b]pyridine-6,13-diones) in moderate yields (37–52%).     

Building Blocks for High-Efficiency Organic Photovoltaics: Interplay of Molecular,Crystal, and Electronic Properties in Post-Fullerene ITIC Ensembles

Accurate single-crystal X-ray diffraction data offer a unique opportunity to compare and contrast the atomistic details of bulk heterojunction photovoltaic small-molecule acceptor structure and packing, as well as provide an essential starting point for computational electronic structure and charge transport analysis. Herein, we report diffraction-derived crystal structures and computational analyses on the n-type semiconductors which enable some of the highest efficiency organic solar cells produced to date, 3,9-bis(2-methylene-(3-(1,1-dicyanomethylene)-indanone))-5,5,11,11-tetrakis(4-hexylphenyl)-dithieno[2,3-d:2′,3′-d′]-s-indaceno[1,2-b:5,6-b′]dithiophene ( ITIC ) and seven derivatives (including three new crystal structures: 3,9-bis(2-methylene-(3-(1,1-dicyanomethylene)-indanone))-5,5,11,11-tetrakis(4-propylphenyl)-dithieno[2,3-d:2′,3′-d′]-s-indaceno[1,2-b:5,6-b′]dithiophene ( ITIC-C3 ), 3,9-bis(2-methylene-(3-(1,1-dicyanomethylene)-indanone))-5,5,11,11-tetrakis(3-hexylphenyl)-dithieno[2,3-d:2′,3′-d′]-s-indaceno[1,2-b:5,6-b′]dithiophene ( m -ITIC-C6 ), and 3,9-bis(2-methylene-((3-(1,1-dicyanomethylene)-6,7-difluoro)-indanone))-5,5,11,11-tetrakis(4-butylphenyl)-dithieno[2,3-d:2′,3′-d′]-s-indaceno[1,2-b:5,6-b′]dithiophene ( ITIC-C4-4F ). IDTT acceptors typically pack in a face-to-face fashion with π–π distances ranging from 3.28–3.95 Å. Additionally, edge-to-face packing is observed with S⋯π interactions as short as 3.21–3.24 Å. Moreover, ITIC end group identities and side chain substituents influence the nature and strength of noncovalent interactions (e. g. H-bonding, π–π) and thus correlate with the observed packing motif, electronic structure, and charge transport properties of the crystals. Density functional theory (DFT) calculations reveal relatively large nearest-neighbor intermolecular π-π electronic couplings (5.85–56.8 meV) and correlate the nature of the band structure with the dispersion interactions in the single crystals and core–end group polarization effects. Overall, this combined experimental and theoretical work reveals key insights into crystal engineering strategies for indacenodithienothiophene (IDTT) acceptors, as well as general design rules for high-efficiency post-fullerene small molecule acceptors.     

Thermal and photochemical reaction of isoxazolone with indole-2,3-dione derivatives

The reaction of indole-2,3-dione derivatives with five membered heterocycle, viz isoxazolone under ther mal as well as photochemical conditions is described. While under refluxing ethanol these conditions afforded 2,3-dihydro-3-(5′-oxo-3′-phenylisoxazolidyl)indol-2-one 3 and a spiro product 2′,3′-dihydro-3,7-diphenylspiro[diisoxazolo[4,5-e:4,5-b]pyran-8,3′-indol]-2′-one 4 , the uv light induced irradiation mainly produced 4,5-dioxo-3-phenylisoxazolo[5,4-b][1]benzazepine 5 and 3-phenylisoxazolo[5,4-b]quinoline-4-carboxylic acid 6 . The products have been characterised on the basis of spectral data and elemental analyses.     

Synthesis,Reactions, and Antimicrobial Evaluation of Some Polycondensed Thienopyrimidine Derivatives

Some novel indeno[2,1-b]thiophenes, indeno[1′,2′:4,5]thieno[2,3-d][1,2,3]triazines, indeno[1′,2′:4,5]thieno[2,3-d]pyrimidines, indeno[1′,2′:4,5]thieno[2,3-d][1,3]thiazolo[3,2-a]pyrimidines, and indeno[1′,2′:4,5]thieno[2,3-d][1,2,4]triazolo[4,3-a]pyrimidines 2–16 were prepared starting with 2-aminoindeno[2,1-b]thiophene-3-carboxylic acid amide ( 1 ). Furthermore, the antimicrobial evaluation of the prepared products showed that many of them revealed promising antimicrobial activity.     

Synthesis of a rotenone-like benzopyranobenzopyranone

The synthesis of a novel rotenone-like molecule, 9-methoxy-8-methyl-6,6a,12,12a-tetrahydro[1]benzopyrano-[3,4-b][1]benzopyran-12-one ( 2 ) is described. Efficient syntheses of 3,4-dihydro-2H-[1]benzopyran-3-one ( 9 ) from ethyl 3-hydroxy-2H-[1]benzopyran-4-carboxylate ( 6 ), an intermediate in the synthesis of 2 , were developed. Thermolysis of 6 and 9 in decalin yielded 6,8-dihydro-14H-bis[1]benzopyrano[3,4-b:4′,3′-e]pyran-14-one ( 8 ), which has previously been described. Also produced in the thermolysis was the isomeric 1H-bis[1]-benzopyrano[3,4-b:3′,4′-á]pyran-7-(9H)one ( 10 ), the first member of a novel, pentacyclic ring system.     

Syntheses of substituted pyrazolo[3,4-b]quinolines, 3,4-dihydro-4-oxopyrimido[4′,5′:4,5]theino[2,3-b]quinoline and pyrido[1′,2′:1,2]pyrimido[4,5-b]quinoline

Syntheses of substituted pyrazolo[3,4-b]quinolines, 3,4-dihydro-4-oxopyriraido[4′,5′:4,5]theino[2,3-b]quinoline and 12-phenylpyrido[1′,2′:1,2[pyrimido[4,5-b]quinoline are described.     

Aminopyrazoles. Part 3. Synthesis of the novel ring systems pyrazolo[4′,3′:5,6]pyrido[2,3-b][1,5]benzoxazepine and [1,5]benzothiazepine

Two-step synthesis of the novel fused heterocycles pyrazolo[4′,3′:5,6]pyrido[2,3-b][1,5]benzoxazepine ( 8 ) and pyrazolo[4′,3′:5,6]pyrido[2,3-b][1,5]benzothiazepine ( 9 ) from the pyrazolo[3,4-b]pyridine derivative 1 is described.     

Chemistry of thienopyridines. XXXVI. Further studies on nitration in the thieno[2,3-b]- and thieno[3,2-b]pyridine systems

Three compounds, thieno[3,2-b]pyridine 4-oxide, 7-nitrothieno[3,2-b]pyridine 4-oxide ( 1 c), and 6-cyano-thieno[2,3-b]pyridine, undergo nitration by means of a mixture of nitric and sulfuric acids to yield 3,7-dinitro-thieno[3,2-b]pyridine (3%), 3,7-dinitrothieno[3,2-b]pyridine 4-oxide ( 1d ) (26%), and 6-carbamoyl-5-nitrothieno[2,3-b]pyridine ( 6b ) (11%), respectively. Structures of the products were ascertained by spectral means, notably infrared, ¹H nmr, and ¹³C nmr. It is proposed that 1d exists (at least in part) as a tricyclic structure and that 6b may result from an intramolecular mechanism of nitration. An attempt to de-N-oxygenate 1c with excess triphenylphosphine removes more than one oxygen atom per molecule (as triphenylphosphine oxide) without producing an identified thienopyridine product.     

Nitration of dithieno[3,4-b:3′,2′-d]pyridine and dithieno[2,3-b:3′,2′-d]pyridine

The nitration of dithieno[3,4-b:3′,2′-d]pyridine ( 2 ) and dithieno[2,3-b:3′,2′-d]pyridine ( 3 ) has been studied. Nitration of 2 occurred in both positions of the c-fused thiophene ring, while 3 was predominantly substituted in the 2-position. The structures of the nitro derivatives were proven by extensive use of ¹H and ¹³C nmr spectroscopy.     

Direct bromination of dithieno[3,4-b:3′,4′-d]pyridine and dithieno[2,3-b:3′,2′-d]pyridine

Bromination of dithieno[3,4-b:3′,4′-d]pyridine ( 1 ) and dithieno[2,3-b:3′,2′-d]pyridine ( 2 ) has been studied. Disubstitution occurred at both positions of the C ring. The substitution pattern is found to be similar to that of the nitration reaction. The structures of bromo derivatives were established by ¹H and ¹³C nmr spectroscopy.     

Preparation of compounds in the new dipyrrolo[3,4-b:3′,4′-e]-pyridine series from 1-benzylidene-2,3-dioxopyrrolidines. A variation of the hantzsch synthesis

Treatment of easily prepared l-substituted-4-benzylidene-2,3-dioxopyrrolidines with ammonium formate produces 1,2,4,6,7,8-hexahydro-2,6-disubstituted-8-aryldipyrrolo [3,4-b:3′,4′-e]pyridine-3,5-diones (II), usually in yields of 50 to 60%. Aromatization of the dihydropyridine ring of the hexahydroderivatives II yields corresponding 1,2,6,7-tetrahydro-2,6-disubstituted-8-aryldipyrrolo[3,4-b:3′,4′-e]pyridine-3,5-diones (III). These compounds appear to be the first to incorporate the dipyrrolo[3,4-b:3′,4′-e]pyridine ring system.     

Synthesis of S-5-pyrrolo[2,3-b]pyridinemethyl and S-5- and S-6-pyrrolo[2,3-d]pyridinemethyl derivatives of 5′-deoxy-5′-thioadenosine

Reaction of 5-dimethylaminomethylpyrrolo[2,3-b]pyridine methiodide or 5-dimethylaminomethylpyrrolo[2,3-d]pyrimidin-4-one methiodide with 5′-deoxy-5′-S-thioacetyl-N⁶-formyl-2′,3′-O-isopropylideneadenosine in ethanolic sodium hydroxide solution, followed by deprotection of the resulting thioether in 80% formic acid, afforded 5′-deoxy-5′-(5-pyrrolo[2,3-b]pyridinemethylthio)adenosine or 5′-deoxy-5′-[5-(pyrrolo[2,3-d]pyrimidin-4-one)methylthio]adenosine, respectively. Similarly, the metiodide salt of the iso-gramine analog, 2-amino-6-dimethylaminomethylpyrrolo[2,3-d]pyrimidin-4-one afforded 5′-deoxy-5′-[6-(2-aminopyrrolo[2,3-d]pyrimidin-4-one)methylthio]adenosine.     

12H-naphtho[1′,2′:5,6]pyrano[2,3-d]pyrimidine derivatives

Reaction of 1-oxo-2-formyl-3-dimethylamino-1H-naphtho[2,1-b]pyran with amidines, guanidine, O-methylisourea, S-methylisothiourea afforded 9-substituted 12-oxo-12H-naphtho[1′,2′:5,6]pyrano[2,3-d]pyrimidines. When the reaction with O-methylisourea was carried out in anhydrous pyridine, 10,20-dioxo-10H,20H-dinaphtho[1,2-e:1′,2′-e′][1,5]diazocino[2,3-b:6,7-b′]dipyran was formed.     

Heterotricyclic systems. Part I. Synthesis of new dipyridopyrazines

Pursuing our previous research on azaquinoxalinones (1,2-dihydropyrido[2,3-b]/[3,4-b]pyrazinones) we prepared, through a reductive cyclization of N-(3′-nitropyridin-2′-yl)piperidine-2-carboxylic acids 3a-c , a set of derivatives of a new tricyclic structure, 7,8,9,10-tetrahydro-5H-dipyrido[1,2-a:3′,2′-e]pyrazin-6(6aH)-ones 4a-c. Starting from these compounds we obtained substituted amides 5a-c and, from 4a , the amidines 6a-c. In the synthesis of 6 , a dehydrogenation reaction occurred giving rise to 7. The compounds 9 and 10 , characterized by a different ring-fusion between the pyridine and pyrazine rings, were synthesized in a similar manner.     

One-pot efficient synthesis of novel fused pentacyclic indolopyridobenzimidazoles and pyridoimidazopyridoindoles from the reaction of pyranoindolones with 1,2-diaminobenzenes and 2,3-diaminopyridines

The synthesis of a number of novel, fully conjugated, planar pentacyclic 5H-indolo[3′,2′:4,5]pyrido[1,2-a][1,3]benzimidazoles (8) and 11H-pyrido[3″,2″:4′,5′]imidazo[1′,2′:1,6]pyrido[3,4-b]indoles (12) by a one-pot reaction of pyranoindolones with substituted o-phenylenediamines or 2,3-diaminopyridines is described. In the case of 2,3-diaminopyridines the reaction proceeds regioselectively affording only regioisomers 12. Structural assignments of the new compounds as well as complete assignment of ¹H and ¹³C NMR signals were based on the analysis of their ¹H and ¹³C NMR (1D and 2D), IR, MS and elemental analysis data. Plausible mechanisms are proposed.     

The photochemical synthesis of novel heterocyclic compounds from s-triazolo[4,3-b]pyridazine (II)

s-Triazolo[4,3-b Jpyridazine (I) photochemically reacted with dihydropyran; 2,3-dihydro-p-dioxin; 2,5-dihydrofuran; 2,5-dimethoxy-2,5-dihydrofuran; and 1,3-dioxep-5-ene to give a new series of substituted pyrrolo[1,2-b]-.s-triazoles (II-IX). In most reactions, two or more products were formed. The following compounds have been prepared from I: 9-methylene-4a,5,6,7,8a,9-hexahydropyrano[2,3 :4,5]pyrrolo[1,2-b]-s-triazole (Ha), the corresponding 9-cyanomethyl product (III), and 9-methylene-4a,7,8,8a-tetrahydro-6H,9H-pyrano[3′,2′:4,5]pyrrolo[1,2-b]-s-triazole (IIb) from dihydropyran; 9-methylene-4a,6,7,8a-tetrahydro-9H-p-dioxino[2′,3′:4,5]-pyrrolo[1,2-6]-s-triazole (IV) from 2,3-dihydro-p-dioxin; 8-methylene-4a,5,7a,8-tetrahydro-7H-furo[3′,4′:4,5]pyrrolo[1,2-b]-s-triazole (V) and the corresponding 8-cyanomethyl product (VI) from 2,5-dihydrofuran; 8-cyanomethyl-5,7-dimethoxy-4a,5,7a,8-tetrahydro-7H-furo[3′,4′:4,5]-pyrrolo[1,2-6]-s-lriazole (VII) from 2,5-dimethoxy-2,5-dihydrofuran; and 10-methylene-4a,5,9a,10-tetrahydro-9H-[1,3]dioxepino[5′,6′:4,5]pyrrolo[1,2-b]-s-triazole (VIII) and the corresponding 10-cyanomethyl product (IX) from 1,3-dioxep-5-ene. The addition of several other compounds (1,2,3,6-tetrahydropyridine, 1-acetylimidazole, 3-sulfolene, 2,3-dihydro-p-dithiin, and vinylene carbonate) was attempted, but no reactions were observed.     

Synthesis of dithienopyrrole derivatives

Reactions of N-substituted succinimides with the Vilsmeier reagent leading to isomeric diformyldichloropyrroles were studied. The latter compounds were used for the synthesis of N-substituted dithieno[2,3-b:2′,3′-d]pyrrole and dithieno[2,3-b:3′,2′-d]pyrrole and their bromo derivatives as well. Dimers of N-alkyldithieno[2,3-b:2′,3′-d]pyrrole, novel promising materials for organic semiconductors, were synthesized.     

Ring transformation of 1,5-benzoxazepines into spirobenzoxazoles. Synthesis of pyrazolo[1′,5′:3,4][1,2,4]triazino-[5,6-b][1,5]benzoxazepines and spiro[benzoxazole-2′(3′H),4(1H)-pyrazolo[5,1-c][1,2,4]triazines]

The reactions of the 3-substituted 4-amino-8-ethoxycarbonyl[5,1-c][1,2,4]triazines 1 and 2 with o-amino-phenol hydrochloride gave the pyrazolo[1′,5′:3,4][1,2,4]triazino[5,6-b][1,5]benzoxazepines 5 and 8 . The alkylation of 5 with methyl iodide and isopropyl iodide afforded the 6-alkoxylpyrazolo[1′,5′:3,4][1,2,4]triazino-[5,6-b][1,5]benzoxazepines 6a and 6b , respectively. Refluxing of 5, 6a, 6b and 8 in hydrochloric acid/acetic acid resulted in ring transformation to produce the spiro[benzoxazole-2′(3′H),4(1H)pyrazolo[5,1-c][1,2,4]-triazines] 7a, 7b and 9 . The screening data of the above compounds was described.