Envirocat EPZ-10: A Solid Acid Catalyst for the Synthesis of 1,8-Dioxo-octahydroxanthenes in Aqueous Medium

An efficient method for synthesis of 1,8-dioxo-octahydroxanthenes using EPZ-10 as a heterogeneous catalyst is developed. In this method, aldehydes and dimedone / cyclohexane-1,3-dione are heated at 70 °C in the presence of a catalytic amount of EPZ-10 in water as a universal solvent, affording the corresponding 1,8-dioxo-octahydroxanthenes in moderate to excellent yields. Also, domino Knoevenagel / hetero-Michael-addition reaction is described in water without any catalyst with excellent yields. The major advantages of this method are excellent yields, short reaction time, and ease of operation. This green protocol works well with dimedone as well as cyclohexane-1,3-dione.     

Electrochemical fluorination of aminoalkyl ethers

It is known that the electrochemical fluorination of trialkylamines in liquid HF takes place readily in good yields, whereas dialkyl ethers give low yields. The latter fluorinated ethers are of interest for their low temperature properties. Our goal in this work was to prepare fluorinated aminoalkyl ether fluids which might combine the favorable yields of amines and properties of ethers. Several dialkylamine and alkylene units were combined in a variety of diamino monoethers, diamino diethers, and monoamino monoethers. Electrochemical fluorination yields as high as 50% were obtained in materials of the first class. The structure-yield relationships and the properties of these new fluids are described.     

Spectroscopy and photochemistry of tetrakis-(1-norbornyl)titanium(IV)

Dominant electronic spectral features in the complex tetrakis(1-norbornyl)titanium(IV) are due to ligand-to-metal charge transfer (LMCT) transitions. Near-ultraviolet irradiation of this complex in non-polar solvents yields homolytic cleavage of the titanium—norbornyl bond as a consequence of this LMCT excitation. Quantum yields were measured using a liquid chromatographic method.     

Effect of hydrophobic and hydrophilic organic salts on charge transfer polymerisation of styrene

Conventional charge transfer (CT) polymerisation often involves an interaction of a monomer with an electron donor and an acceptor in additives such as Dimethyl Sulfoxide (DMSO). The conventional method suffers from the drawback of poor yields. An attempt has been made in this study to synthesise the polymers by employing different organic salts as an ionisation enhancing additive. The use of a hydrophobic organic salt enhanced the polymer yields significantly and also increased thermal stability. Hydrophilic salts, based on organo-borate anions and quaternary ammonium cations also increased the polymer yields compared to the conventional system.     

One‐Shot Double Elimination Process: A Practical and Concise Protocol for Diaryl Acetylenes

A variety of diaryl acetylenes were obtained in good yields when lithium hexamethyldisilazide was added to a solution of arylmethyl sulfone, aryl aldehyde, and chlorodiethylphosphate in THF. In this one‐shot process, a number of transformations such as aldol reaction, phosphorylation of aldolate, and double elimination of the resulting β‐substituted sulfone proceeded successively to afford the desired acetylenes. The one‐shot process was accelerated by the substitution of halogen atoms on the phenyl groups, and unsymmetrically substituted diaryl acetylenes were obtained without contamination of the dehalogenated products. Diaryl acetylenes with other substituents such as CF₃, ethoxycarbonyl, dimethylamino, TMS‐acetylene groups, as well as pyridinyl and thienyl moieties were also accessible with this method. However, methoxy‐substituted compounds were obtained in moderate yields under the same conditions, but the yields were increased when lithium diisopropylamide was used instead.     

Umvinylierungen mit Vinyl-phenyl-äther als Vinylierungsmittel

Vinyl interchange of vinyl phenyl ether with phenols in the presence of mercuric acetate as a catalyst gives the corresponding vinyl aryl ethers in 40–75% yields. The reaction between vinyl phenyl ether and alcohols yields isolable quantities of vinyl alkyl ethers only when this product can be removed continuously during the reaction.     

Three component,one-pot synthesis of amidoalkyl naphthols using polyphosphate ester under solvent-free conditions

Amidoalkyl naphthols are synthesized via a simple, one-pot, three-component reaction between aldehydes, 2-naphthol and amides or ureas using polyphosphate ester (PPE) as a reaction mediator under solvent-free conditions in good to excellent yields. High yields, short reaction time, easy work-up, elimination of solvents and toxic catalysts are the advantages of this procedure.     

BENZOPHENONE-SENSITIZED LIPID PEROXIDATION IN LINOLEATE MICELLES

Abstract— Benzophenone-photosensitized peroxidation in linoleic acid micelles (Type I reaction) has been investigated and quantum yields of both sensitizer photolysis and lipid peroxidation have been obtained. Benzophenone as well as its derivative, benzophenone-4'-heptyl-4-pentanoic acid (BHPA) have been utilized as sensitizers in this study. A quantum yield of 1.2 for hydroperoxide formation, compared with a benzophenone disappearance quantum yield of 0.41 (in the same linoleate micellar solution) was obtained; yields of 1.3 and 0.6 were found for comparable systems in which BHPA was the sensitizer. Although such data are consistent with the peroxidation mechanism of chain reaction, it is necessary to know the yields of initiating species to arrive at chain reaction lengths in these systems. Such yields have been determined by flash photolysis. The dependencies of sensitizer photolysis and hydroperoxide yields on linoleate concentration have also been determined in order to elucidate the effects of micelle formation or molecular organization on the peroxidative process. Additionally, for comparison in a saturated surfactant (lipid) system hydrogen abstraction was investigated by photolysis techniques in sodium dodecyl sulfate alone using these two sensitizers.     

On the triplet state of poly(N-vinylcarbazole)

Triplet state properties including transient triplet absorption spectrum, intersystem crossing yields in solution at room temperature and phosphorescence spectra, quantum yields and lifetimes at low temperature as well as singlet oxygen yields were obtained for poly(N-vinylcarbazole) (PVK) in 2-methyl-tetrahydrofuran (2-MeTHF), cyclohexane or benzene. The results allow the determination of the energy value for the lowest lying triplet state and also show that triplet formation and deactivation is a minor route for relaxation of the lowest excited singlet state of PVK. In addition, they show the triplet state is at higher energy than reported heavy metal dopants used for electrophosphorescent devices, such that if this is used as a host it will not quench their luminescence.     

Synthesis of 2,3-dihydroindoles, indoles, and anilines by transition metal-free amination of aryl chlorides

Aliphatic and aromatic amines react with 2- and 3-chlorostyrene in the presence of potassium tert-butoxide to give N-substituted 2,3-dihydroindoles in good yields. The combination of this domino-amination protocol with a suitable dehydrogenation reaction gives access to pharmacologically interesting indoles in a one-pot procedure. Overall product yields of N-substituted indoles >50% are obtained by this method starting from commercially available substrates. In addition to the intramolecular base-promoted amination of aromatic C-Cl bonds, metal-free intermolecular aminations of aryl chlorides with primary and secondary amines are described. The use of potassium tert-butoxide as base allows the synthesis of various anilines in good to excellent yields. Due to the formation of aryne intermediates, either N-substituted anilines or meta-substituted anilines are produced with excellent selectivities.     

Ionic liquid as an efficient promoting medium for fixation of CO2: clean synthesis of alpha-methylene cyclic carbonates from CO2 and propargyl alcohols catalyzed by metal salts under mild conditions

Reactions of propargylic alcohols with CO(2) in a [BMIm][PhSO(3)]/CuCl catalytic system to produce the corresponding alpha-methylene cyclic carbonates were conducted with high yields. Mild reaction conditions, enhanced rates, improved yields, and recyclable ionic liquid catalyst systems are the remarkable features exhibited in this process. Furthermore, the use of large amounts of tertiary amines as well as nitrogen-containing organic solvent as employed in previously studies was avoided.     

Hydrated electron yields in the heavy ion radiolysis of water

Experimental measurements coupled with Monte Carlo track simulations have been used to examine the yields of hydrated electrons in the radiolysis of water with protons, helium ions, and carbon ions. Glycylglycine, in concentrations ranging from 10(-4) to 1 M, was employed as a scavenger and the production of the ammonium cation used as a probe of hydrated electron yields from about 2 ns to 20 mus. Monte Carlo track simulations employing diffusion-kinetic calculations of product yields are found to reproduce experimental observations satisfactorily. Model details are used to elucidate the heavy ion track physics and chemistry. Comparison of the heavy ion results with those found in gamma radiolysis shows intratrack reactions are significant on the nanosecond to microsecond time scale as the ion track relaxes, and that a constant (escape) yield is never attained on this time scale. Numerical interpolation techniques are used to obtain both track average and track segment yields for use in practical applications or comparison with other models. The model results give the first hints that initial ( approximately 5 ps) hydrated electron yields, and possibly other water decomposition products, are dependent on the type and energy of the incident radiation.     

Copper-catalyzed Ullmann-type synthesis of diaryl ethers assisted by salicylaldimine ligands

A series of salicylaldimine ligands were designed to promote the copper-catalyzed Ullmann cross- coupling reaction. After a screening process, 2-（（2-isopropylphenylimino）methyl）phenol was found to serve as a good supporting ligand for this reaction. Employing this Schiff-base ligand as a new supporting ligand, the copper-catalyzed coupling reactions of aryl bromides and aryl iodides with various phenols successfully proceeded in good yields under mild conditions. Various diaryl ethers were obtained with excellent yields in dioxane in the presence of K3P04 and a catalytic amount of copper（I） salt.     

Synthesis of 5,1′-alkynyl- and 5,1′-alkenyl-1,3-cyclohexadiene-tricarbonyliron complexes using aluminum reagents

Dimethylaluminum acetylides react with (η⁵-cyclohexadienyl)tricarbonyliron fluoroborate (1) to give the corresponding C(5) alkynyl substituted complexes in high yields without competing reduction products. Using this method, phenylethynyl and trimethylsilylethynyl groups have been added to the cationic complex at C(5). In the latter case, the yield can be improved substantially if tris(trimethylsilylethynyl)-aluminum is used instead. Desilylation of this complex yields the 5-ethynyl complex. Hydrogenation with Lindlar's catalyst yields the corresponding alkenyl complex. Oxidative removal of the Fe(CO)₃ moiety yields the organic ligand in near quantiative yields. Use of aluminum reagents as alkynyl anion synthons in reactions with 1 is a far superior method compared to the use of either lithium acetylides which give complicated mixtures of products or 1-trimethylsilylalkynes which are unreactive.     

A modified synthesis of 4-chloromethylthiazoles

A two-reaction synthesis of 2-substituted-4-chloromethylthiazoles from thioamides and 1,3-dichloroacetone is reported. The first step, cyclization to a 2-substituted-4-chloromethyl-4-hydroxythiazoline is carried out in the presence of bicarbonate in an aprotic solvent. Dehydration of this intermediate to a 2-substituted-4-chloromethylthiazole is accomplished by reaction with thionyl chloride, sulfuryl chloride, phosphoryl chloride, phosphorus trichloride or phosphorus pentachloride. Substituents on the thioamide, such as amino, alkyl, or aryl, are shown not to affect the success of the reaction. As a trend, alkylthioamides give slightly better yields of 4-chloromethylthiazoles than do arylthioamides. The yields of 4-chloromethylthiazoles prepared using this procedure are comparable to the yields obtained using acid catalyzed procedures.     

An efficient synthesis of β-aminoketone compounds through three-component Mannich reaction catalyzed by calcium chloride

Abstract  

Various β-aminoketones were synthesized in a three-component reaction of ketones, aldehydes, and amines in the presence of calcium chloride as catalyst in ethanol in high yields as compared to other synthetic methods. The advantages of this new method are a short reaction time (2 h), high yields, easy workup, convenience, low cost, and eco-friendly protocol.     

Glyoxylic acid as catalyst： A simple selective synthesis of 1,2-disubstituted benzimidazoles in aqueous media

Glyoxylic acid （5 mol%） performs as a novel highly water-soluble catalyst for the synthesis of 2-aryl-l-arylmethyl-lH- benzimidazoles from a wide range of substituted o-phenylenediamines and various substituted aldehydes in good to excellent isolated yields （85-95%） using water as solvent at ambient temperature. The remarkable advantages offered by this method are easily and inexpensive available catalyst, simple procedure, mild conditions, much faster （20--40 rain） reactions and excellent yields of products.     

Constructing catalyst knowledge networks from catalyst big data in oxidative coupling of methane for designing catalysts

Designing high performance catalysts for the oxidative coupling of methane (OCM) reaction is often hindered by inconsistent catalyst data, which often leads to difficulties in extracting information such as combinatorial effects of elements upon catalyst performance as well as difficulties in reaching yields beyond a particular threshold. In order to investigate C₂ yields more systematically, high throughput experiments are conducted in an effort to mass-produce catalyst-related data in a way that provides more consistency and structure. Graph theory is applied in order to visualize underlying trends in the transformation of high-throughput data into networks, which are then used to design new catalysts that potentially result in high C₂ yields during the OCM reaction. Transforming high-throughput data in this manner has resulted in a representation of catalyst data that is more intuitive to use and also has resulted in the successful design of a myriad of catalysts that elicit high C₂ yields, several of which resulted in yields greater than those originally reported in the high-throughput data. Thus, transforming high-throughput catalytic data into catalyst design-friendly maps provides a new method of catalyst design that is more efficient and has a higher likelihood of resulting in high performance catalysts.

Catalyst data created through high-throughput experimentation is transformed into catalyst knowledge networks, leading to a new method of catalyst design where successfully designed catalysts result in high C₂ yields during the OCM reaction.     

THE PHOTOPHYSICS OF MEROCYANINE 540. A COMPARATIVE STUDY IN ETHANOL AND IN LIPOSOMES

Abstract— Absorption and fluorescence emission spectra, fluorescence lifetimes, fluorescence quantum yields, photoisomerization quantum yields and triplet quantum yields were measured for Merocyanine 540 (MC540) in ethanol and in large unilamellar dimyristoyl phosphatidylcholine vesicles. The major differences in the photophysics between the two media are the increase of the fluorescence quantum yield from 0.15 in ethanol to 0.6 in vesicles at 25° C, and the appearance of a second fluorescence decay with a lifetime of 1.87 ns in the latter medium. Upper and lower limits for the photoisomerization quantum yields were determined by combining the data from laser flash photolysis and optoacoustic spectroscopy. The decrease in photoisomerization quantum yield upon incorporation of the dye into the lipid bilayer by a factor 2 suggests that this process competes directly with fluorescence. The temperature dependence of the fluorescence and photoisomerization quantum yields in solution supports this model. In both media MC540 has a very low triplet quantum yield with values 0.002 > (> ø_T > 0.02 in ethanol and 0.01 > ø_T- > 0.09 in liposomes Our data are consistent with the model whereby the dye is incorporated into the lipid bilayer as a monomer with two different orientations and this model is adopted on the basis of the biexponential behaviour of the fluorescence and photoisomer decay.     

由2-烷基蒽醌一步法制备2-烷基蒽

本文报道了以2-烷基蒽醌为原料,结晶硫酸铜为催化剂,锌粉为还原剂于浓氨水(25%～28%)中一步法制备2-烷基蒽.产物通过硅胶柱层析,收率范围:55%～90%.文中从取代基的电子效应和空间位阻角度分析了产率的变化规律.同时考察了其它几种无机盐用作催化剂的催化作用.