A simple and sensitive analytical method for the determination of antimony in environmental and biological samples.

The results of a study and application of leucocrystal violet for the determination of antimony in parts per million levels is described here. The proposed method is based on the reaction of antimony(III) with acidified potassium iodate to liberate iodine. The liberated iodine selectively oxidizes leucocrystal violet to crystal violet dye. The formed dye shows maximum absorbance at 590 nm. The color system obeys Beer's law in the concentration range from 0.4 - 3.6 microg antimony per 25 ml of final solution. The molar absorptivity and Sandell's sensitivity were found to be 7.32 x 10(5) l mol(-1) cm(-1) and 0.0016 microg cm(-2), respectively. All variables were studied in order to optimize the reaction. The proposed method is satisfactorily applicable for the analysis of antimony in various environmental and biological samples. The method is simple, highly sensitive, accurate and reliable.     

Spectrophotometric Determination of Hydrogen Peroxide Using Leucocrystal Violet in Micellar Medium

A simple and sensitive spectrophotometric method for the determination of hydrogen peroxide, based on the increase in color intensity of dye on addition of surfactant, is described. Hydrogen peroxide is first reacted with potassium iodide in acidic medium, in presence of ammonium molybdate to liberate iodine. The liberated iodine oxidizes leucocrystal violet to crystal violet having maximum absorbance at 593 nm. The color of the dye intensifies with the addition of the surfactant, cetyl pyridinium chloride though the absorption maximum remains the same. Beer's law is obeyed in the range 0.05–0.45 µg of hydrogen peroxide per 25 mL of final solution (0.002–0.018 µg mL^?1) with an excellent correlation coefficient (r = 0.9977). The proposed method has been successfully applied for the analysis of hydrogen peroxide in various food products and rainwater.     

A New Spectrophotometric Method for the Determination of Ascorbic Acid Using Leuco Malachite Green

A new simple and sensitive and selective spectrophotometric method has been developed for the determination of ascorbic acid (AA) at trace level using a new reagent, leuco malachite green (LMG). AAreacts with potassium iodide‐iodate solution under acidic conditions to liberate iodine and the liberated iodine selectively oxidizes LMG to MG dye. The colour of the dye was measured at 620 nm. Beer's law is obeyed over the concentration range of 0.8–8 iμg μAA per 25 mL of final solution (0.032–0.32 ppm). The apparent molar absorptivity and Sandell's sensitivity of the method were found to be 2.98 × 10⁵ l mol⁻¹ cm⁻¹, 0.0042 μg cm⁻², and respectively. Statistical treatment of the experimental results indicates that the method is precise and accurate. The method is free from interference of common ions and many of the ingredients commonly found in pharmaceuticals. The reliability of the method was established by parallel determination against Leucocrystal violet (LCV) method. The method described was satisfactorily applied for the determination of AA in fruit juices, pharmaceuticals and biological samples.     

A Sensitive Spectrophotometric Determination of Nitrite in Water and Soil

A highly sensitive spectrophotometric method for the determination of nitrite in water and soil has been developed. The reaction of nitrite with acidified potassium iodide to liberate iodine which oxidizes leuco‐crystal violet (LCV) to form crystal violet having absorption maxima at 590 nm forms the bases of this method. In aqueous medium the system obeys Beer's law in the range of 0.1 to 1.0 μg per 25 mL (0.004–0.04 ppm), while in an extractive system the range is 0.025–0.25 μg in 100 mL (0.00025–0.0025 ppm). The molar absorptivity and Sandell's sensitivity were found to be 1.54 × 10⁶ 1 mol^?1 cm^?1 and 44 pg cm^?2, respectively.     

Colorimetric Determination of Seleniumin Various Environmental Samples

A new reagent system using rhodamine‐B dye for the determination of selenium is described. The method is based on the reaction of selenium with acidified potassium iodide to liberate iodine. The liberated iodine bleaches the pink colour rhodamine‐B, which is measured at 555 nm. Beer's law is obeyed over the concentration range of 1–10 μg of selenium final solution volume of 25 mL (0.04–0.4 ppm) and the apparent molar absorptivity and Sandell's sensitivity was found to be 1.96× 10⁵ l mol^?1 cm^?1 and 0.0004 μg cm^?2, respectively. The method is simple, sensitive, and selective and is satisfactorily applied to micro‐level determination of selenium in various environmental and cosmetic samples.     

Colorimetric Determination of Sulphur Dioxide and Sulphites in Various Environmental Samples

Rhodamine‐B has been proposed as a simple and sensitive colorimetric reagent for the estimation of sulphur dioxide in air. The air sample containing sulphur dioxide is passed through the absorbing solution of aqueous potassium iodate and N‐chlorosuccinimide to liberate iodine. The liberated iodine bleaches the pinkish red coloured rhodamine‐B dye, which measured at 555 nm. Beer's law was obeyed in the range of 0.5–5.0 μg, of sulphite per 25 mL (0.02–0.2 ppm) equivalent to 0.4–4.0 μg of sulphur dioxide (0.016–0.16 ppm). The molar absorptivity and Sandell's sensitivity were found to be 4.56 × 10⁵ l mol^?1 cm^?1 and 0.00017 μg cm^?2, respectively. The method has been suitably modified and successfully applied to the determination of sulphites in water after liberation of sulphur dioxide in acidic medium.     

A Sensitive Colorimetric Reagent for the Determination of Cyanide and Hydrogen Cyanide in Various Environmental Samples

A sensitive reagent system is proposed for the determination of cyanide and hydrogen cyanide in various environmental samples. The method is based on the conversion of cyanide into cyanogen bromide followed by its reaction with pyridine to form glutaconic aldehyde. The glutaconic aldehyde so formed is coupled with p‐aminoacetophenone forming yellow‐orange polymethine dye measured at 445 nm. The colour system obeys Beer's law in the range of 0.01–0.16 ppm of cyanide inaqeous phase and 0.002–0.03 ppm in extracting system. The molar absorptivity and Sandell's sensitivity were found to be 6.51 × 10⁵ l mol^?1 cm^?1 and 0.0001 μg cm^?2, respectively. The method has been successfully applied for the determination of cyanide in air, industrial effluent, biological samples, and in the pesticide acrylonitrile.     

A sensitive colorimetric method for the micro determination of iodine in marine water

More than 70% of the earth surface is covered by water bodies. Marine pollution is associated with the discharge of oils, petroleum products, sewage agricultural wastes, pesticides, heavy metals, waste substances and dumping of radioactive waters in sea. This in turn results in hazards to human health, hindrance to aquatic organisms and impairment of quality for use of sea water. Sea water is reported to contain iodine but the concentration varies according to the location and depth. Here a simple and sensitive method is described for the determination of iodine using leucocrystal violet as a reagent in different samples of sea water. The method is based on the oxidation of iodine to iodate with bromine water and the liberation of free iodine from the iodate by addition of potassium iodide in acedic medium. This iodine selectively oxidises leucocrystal violet to form the crystal violet dye. Beer's law is obeyed over the concentration range of 0.04-0.36 ppm of iodine at lambda(max) 592 nm. The dye was further extracted in chloroform. The extracting system obeys Beer's law in the range of 0.008-0.08 ppm at lambda(max) 588 nm.     

A New Spectrophotometric Method for the Determination of Arsenic in Environmental and Biological Samples

Abstract

A simple and selective spectrophotometric method has been developed for the determination of trace amounts of arsenic using azure B as a chromogenic reagent. The proposed method is based on the reaction of arsenic(III) with potassium iodate in acid medium to liberate iodine. The liberated iodine bleaches the violet color of azure B and is measured at 644 nm. This decrease in absorbance is directly proportional to the As(III) concentration, and Beer's law is obeyed in the range 0.2–10 µg ml^?1 of As(III). The molar absorptivity, Sandell's sensitivity, detection limit, and quantitation limit of the method were found to be 1.12×10⁴ l mol^?1cm^?1, 6.71×10^?3 µg cm^?2, 0.02 µg ml^?1 and 0.08 µg ml^?1, respectively. The optimum reaction conditions and other analytical parameters were evaluated. The proposed method has been successfully applied for the determination of arsenic in various environmental and biological samples.     

A New and Highly Sensitive Spectrophotometric Determination of Monocrotophos in Environmental,Agricultural and Biological Samples

A new and highly sensitive spectophotometric method is developed for the determination of parts per million levels of widely used organophosphorus pesticide monocrotophos. The method is based on alkaline hydrolysis of monocrotophos to N‐methylacetoacetamide followed by coupling with diazotized p‐amino acetophenone in alkaline medium. The absorption maxima of the reddish‐violet coloured compound formed is measured at 560 nm. Beer's law is obeyed over the concentration range of 1.2 to 6.8 μg in a final solution volume of 25 mL. The molar absorptivity and Sandell's sensitivity were found to be 7.1 × 10⁵ (±100) L mole^?1 cm^?1 and 0.008 μg cm^?2, respectively. The standard deviation and relative standard deviation were found to be ± 0.005 and 2.05%, respectively. The method is simple, sensitive and free from interferences of other pesticides and diverse ions. The method has been satisfactorily applied to the determination of monocrotophos in environmental, agricultural and biological samples.     

Trace Spectrophotometric Determination of Dichlorvos using Diphenyl Semicarbazide (DPC) in Environmental and Agricultural Samples

A new and highly sensitive spectrophotometric method is developed for the determination of sub ppm levels of the widely used organophosphorus insecticide dichlorvos. The method is based on alkaline hydrolysis of dichlorvos to dichloroacetaldehyde followed by coupling with diphenyl semicarbazide (DPC) in alkaline medium. The absorption maxima of the wine red dye compound formed is measured at 490 nm. Beer's law is obeyed over the concentration range of 4.3 to 34 μg in a final solution volume of 25 mL (0.18–1.36 ppm). The molar absorptivity, Sandell's sensitivity and correlation coefficient were found to be 2.9 × 10⁵ l mole^?1 cm^?1, 0.013 μg cm^?2 and 0.9999, respectively. The standard deviation and relative standard deviation were found to be ± 0.007 and 1.90%, respectively. The lower limit of detection is 0.04 μg. The method is simple, sensitive and free from interferences of other pesticides and diverse ions. Other organophosphorous pesticides do not interfere with the proposed method. The method has been satisfactorily applied to the determination of dichlorvos in environmental and agricultural samples.     

Determination of Traces of Vanadium with 5-Bomosalicylhydroxamic Acid by Solid-Phase Spectrophotometry

Abstract

A microdetermination method at μg 1^?1 levels for vanadium by solid-phase spectrophotometry has been developed. 5-Bromosalicylhydroxamic acid was used as chromogenic reagent to form a 1:2 violet complex which is easily sorbed and concentrated on a dextran-type anion-exchange resin. The resin-phase absorbances at 560 and 850 nm were measured directly. Vanadium can be determined in the 5 - 60 μg 1^?1 range with a RSD of 4.3%. The method is applied to the determination of vanadium in pet roleiim crudes and natural water, samples.     

Redox Speciation of Inorganic Arsenic in Water and Saline Samples by Adsorptive Cathodic Stripping Voltammetry in the Presence of Sodium Diethyl Dithiocarbamate

This paper describes a new voltammetric procedure for the inorganic speciation of As(III) and As(V) in water samples. The procedure is based on the chemical reduction of arsenate [As(V)] to arsenite [As(III)] followed by the voltammetric determination of total arsenic as As(III) at the hanging mercury drop electrode (HMDE) by adsorptive cathodic stripping voltammetry (AdCSV) in the presence of sodium diethyl dithiocarbamate (SDDC). The reduction step involved the reaction with a mixture of Na₂S₂O₅ and Na₂S₂O₃ in the concentrations 2.5 and 0.5 mg mL^?1, respectively, and the sample heating at 80 °C for 45 min. The linear range for the determination of total arsenic as As(III) in the presence of SDDC was between 5 and 150 μg L^?1 for a deposition time of 60 s (r=0.992). A detection limit of 1.05 μg L^?1 for total As was calculated for the method in water samples using a deposition time of 60 s. The detection limits of 4.2 μg L^?1 and 15.0 μg L^?1 for total As in seawater and dialysis concentrates, respectively, were calculated using a deposition time of 60 s. The relative standard deviations calculated were 2.5 and 4.0% for five measurements of 20 μg L^?1 As(V) as As(III) in water and dialysis concentrates, respectively, after chemical reduction under optimized conditions. The method was applied for the determination of As(III) and total As in samples of dialysis water, mineral water, seawater and dialysis concentrates. Recovery values between 86.0 and 104.0% for As(III) and As(V) added to the samples prove the satisfactory accuracy and applicability of the procedure for the arsenic monitoring.     

Headspace single-drop microextraction coupled with gas chromatography electron capture detection of butanone derivative for determination of iodine in milk powder and urine

A new detection method using headspace single-drop microextraction (HS-SDME) coupled to gas chromatography (GC) was established to determine the iodine in milk powder and urine. The derivative from the reaction between iodine and butanone in the acidic media was extracted into a micro-drop then determined by GC-ECD. With the optimisation of HS-SDME and derivatisation, the calibration curve showed good linearity within the range of 0.004–0.1 μg mL^?1 (0.004–0.1 μg g^?1) (R ² = 0.9991), and the limits of detection for milk powder and urine were 0.0018 μg g^?1 and 0.36 μg L^?1, respectively. The mean recoveries of milk powder and urine were 90.0–107 % and 89.4–101 % with mean RSD of 1.7–3.4 % and 2.7–3.3 %, respectively. This detection method affords a number of advantages, such as being simple, rapid, and inexpensive, with low organic solvent consumption, and is remarkably free from interference effects, rendering it an efficient method for the determination of iodine in milk powder and urine samples.     

Spectrophotometric determination of vanadium using variamine blue and its application to synthetic, environmental and biological samples

A simple, rapid and accurate spectrophotometric method is described for the determination of trace amounts of vanadium using variamine blue (VB) as a chromogenic reagent. The method is based on the oxidation of variamine blue to form a violetcolored species on reaction with vanadium(V), having an absorption maximum at 570 nm. Beer’s law is obeyed in the range of 0.1–2.0 μg ml^?1. The molar absorptivity and Sandell’s sensitivity were found to be 1.65 × 10⁴ l mol^?1 cm^?1 and 0.003 μg cm^?2, respectively. Optimum reaction conditions were evaluated in order to delimit the linear range. The effect of interfering ions on the determination is described. The proposed method has been successfully applied to the determination of vanadium in steel, pharmaceutical, environmental, and biological samples.     

Determination of arsenic in steel and cast iron by hydride-generation atomic absorption spectrometry

A procedure is described for the determination of arsenic in steel and cast iron by atomic absorption spectrometry after hydride generation with sodium tetrahydroborate. The samples are decomposed with a nitric/perchloric acid mixture. The data are evaluated directly against acidic standard solutions of arsenic(V). The limit of detection is about 1 μg g^?1 and the precision is better than 4% for concentrations exceeding 10 μg g^?1.     

Stripping voltammetry of aluminum based on adsorptive accumulation of its solochrome violet RS complex at the static mercury drop electrode

A very sensitive electrochemical stripping procedure for aluminum is reported. Accumulation is achieved by controlled adsorption of the aluminum/solochrome violet RS complex on the static mercury drop electrode. Optimal experimental parameters include an accumulation potential of ?0.45 V, solochrome violet RS concentration of 1 × 10^?6 M, and a linear-scan stripping mode. The detection limit is 0.15 μg l^?1, the response is linear over the 0–30 μg l^?1 concentration range, and the relative standard deviation (at the 10 μg l^?1 level) is 2%. Most cations do not interfere in the determination of aluminum. The interference of iron(III) is eliminated by addition of ascorbic acid. Results are reported for snow samples.     

Differential preconcentration of arsenic(III) and arsenic(V) with thionalide loaded on silica gel

2-Mercapto-N-2-naphtylacetamide (thionalide) on silica gel is used for differential preconcentration of μg l^?1 levels of arsenic(III) and arsenic(V) from aqueous solution. In batch experiments, arsenic(III) was quantitatively retained on the gel from solutions of pH 6.5–8.5, but arsenic(V) and organic arsenic compounds were not retained. The chelating capacity of the gel was 5.6 μmol g^?1 As(III) at pH 7.0. Arsenic retained on teh column was completely eluted with 25 ml of 0.01 M sodium borate in 0.01 M sodium hydroxide containing 10 mg l^?1 iodine (pH 10). The arsenic was determined by silver diethyldithiocarbamate spectrophotometry. Arsenic(V) was subsequently determined after reduction to arsenic(III) with sulphite and iodide. Arsenic(III) and arsenic(V) in sea water are shown to be < 0.12 and 1.6 μg l^?1, respectively.     

Simultaneous Spectrophotometric Determination of Aluminum and Iron in Micellar Media by Using the H‐Point Standard Addition Method

A very simple spectrophotometric method for simultaneous determination of aluminum(III) and iron(III) based on formation of their complexes with pyrocatechol violet (PCV) in micellar media, using the H‐point standard addition method (HPSAM), is described. In micellar media, the metal complexes of Al‐PCV and Fe‐PCV are formed very fast. Formation of both of the complexes was complete within 5 min at pH 8.5. The linear ranges for aluminum and iron were 0.05‐2.50 and 0.10‐4.00 μg mL^?1, respectively. The relative standard deviation (R.S.D.) for the simultaneous determination 0.40 μg mL^?1 of Al(III) and 0.20 μg mL^?1 of Fe(III) were 3.24% and 4.22%, respectively. Interference effects of common anions and cations were studied. The method was applied to simultaneous determination of Al(III) and Fe(III) in standard reference material and alloy samples.     

Determination of arsenic by hydride generation with a long absorption cell for atomic absorption spectrometry

A method is described for the determination of arsenic involving hydride generation and atomic absorption spectrometry with an improved long graphite-tube furnace capable of considerably higher temperatures than the conventional quartz-tube heaters. Arsine is generated with sodium tetrahydroborate, held in a nitrogen-cooled trap and then swept with helium into an alumina tube (19 cm long) placed within the graphite furnace. The optimum conditions for determination of arsenic are given. The detection limit is 0.2 ng ml^?1 with RSD of 2–3%. Results for various NBS Standard Reference Materials agreed well with expected values and were as follows: orchard leaves, 10 ± 1 μg g^?1; tomato leaves, 0.28 ± 0.03 μg g^?1; bovine liver, 0.046 ± 0.005 μg g^?1.