Enhancement of oxygen reduction at Co-porphyrin catalyst by supporting onto hybrid multi-layered film of polypyrrole and polyoxometalate-modified gold nanoparticles

Three-dimensional multi-layered films (on glassy carbon) composed of networks of polyoxometallate (PMo₁₂O₄₀ ³⁻)-modified gold nanoparticles linked together through the alternately deposited ultra-thin layers of polypyrrole have served as active supports for Co-porphyrin catalytic centers. The hybrid organic-inorganic films (supports) have been prepared by using the layer-by-layer approach. The fact that polyanionic (phosphomolybdate) adsorbates on gold nanoparticles are attracted by positively charged sites of conducting polymer (polypyrrole) structures leads to the stabilizing effect and facilitates distribution of Au nanostructures. The systems have been characterized using scanning electron microscopy, as well as with chronoamperometric and voltammetric techniques. By supporting Co-porphyrin centers onto the hybrid film of the polymer-linked phosphomolybdate-stabilized gold nanoparticles, significant electrocatalytic enhancement effects (namely voltammetric current increases) have been observed during the electroreduction of oxygen in acid medium relative to a standard response of the simple porphyrin deposit on glassy carbon measured under analogous conditions. Among important issues is the high activity of the hybrid film (support) itself toward the reductive decomposition of hydrogen peroxide to water. When it comes to performance of the Co-porphyrin-containing system, it is reasonable to expect that the O₂ reduction process is initiated at Co-porphyrin catalytic sites (two-electron reduction to H₂O₂) and continued (two-electron reduction to H₂O) at the hybrid film containing gold nanoparticles dispersed within the highly porous cauliflower-like structures of polypyrrole multi-layers. While the gold networks facilitate charge distribution within the hybrid electrocatalytic film, non-covalent π-π interactions of porphyrin rings with polypyrrole interlayers and charge transfers between negatively charged (PMo₁₂O₄₀ ³⁻ modified) gold nanoparticles and positively charged nitrogen sites of polypyrrole could also cause synergism.

     

The electrocatalytic reactions of adenine, guanine, H2O, H2O2, N2H4, and l -cysteine catalyzed by poly(Ni(4-TMPyP)) film-modified electrodes

Electrochemical preparation of poly(nickel tetrakis(N-methyl-4-pyridyl)porphyrin) tetratosylate (poly-Ni(4-TMPyP)) produces stable and electrochemically active films in strong and weak basic aqueous solutions. These films were produced on glassy carbon and gold electrodes. The electrochemical quartz crystal microbalance and cyclic voltammetry were used to study the in situ growth of poly(Ni(4-TMPyP)) films. The electrochemical properties of poly(Ni(4-TMPyP)) films indicate that the redox process was confined in to the immobilized film. The electrochemical quartz crystal microbalance results showed an ion exchange reaction for the redox couple. The polymer films showed one new redox couple when transferred to strong and weak basic aqueous solutions and the formal potential was found to be pH dependent. The electrocatalytic oxidation of H₂O by a nickel tetrakis(N-methyl-4-pyridyl)porphyrin film-modified electrode was also performed. The mechanism of oxygen evolution was determined by cyclic voltammetry, chronoamperometry and rotating ring disc electrode methods. The oxygen evolution was determined by a bicatalyst system using hemoglobin, and iron tetrakis (N-methyl-2-pyridyl)porphyrin as catalyst to detect the oxygen by electrocatalytic reduction. The electrocatalytic oxidations of adenine, guanine, H₂O₂, N₂H₄, NH₂OH, and l-cysteine by the film-modified electrode obtained from water-soluble nickel porphyrin were also investigated.     

Fabrication of Covalently Attached Multilayer Film Electrode Containing Iron Porphyrin and Its Electrocatalysis Toward Sulfite

Construction of a highly stable covalently attached multilayer film electrode containing iron porphyrin was achieved by UV irradiation of ionic self‐assembled multilayer films of diazo‐resins (DAR) and anionic Fe(III)tetrakis(p‐sulfonatophenyl)porphyrin (FeTSPP). The multilayer films had been characterized by UV, IR spectra and cyclic valtammetry. The electrocatalytic transformation of sulfite to SO₄^2? by the multilayer film electrode containing FeTSPP was investigated. In 0.1 M NH₄OH? NH₄Cl buffer solution (pH 8.74) and 0.1 M borate buffer solution (pH 9.18) the electrocatalytic oxidation of sulfite through the multilayer film electrode can be performed. However, in acetate buffer solution (pH 4.0) the electrocatalytic reduction of sulfite by the multilayer film electrode had also good activity. The modified electrode also exhibited a fast response and good stability.     

Self-assembled monolayer of an iron(III) porphyrin disulphide derivative on gold

A novel iron(III) porphyrin disulphide derivative have been successfully immobilised on gold surfaces by self-assembly. The redox response of the modified electrodes was compared with the obtained for a similar iron porphyrin in solution, confirming the immobilisation of the metalloporphyrin. The gravimetric data obtained by electrochemical quartz crystal microbalance (EQCM) during adsorption allowed an estimation of the electrode coverage, providing further evidence for the formation of the porphyrin SAM. The modified electrodes were also measured by conventional and imaging ellipsometry. The electrocatalytic activity of the two modified electrodes was tested for the reduction of the molecular oxygen.     

Immobilization of heme complex by radiation polymerization

Transparent films containing an iron-porphyrin complex were synthesized by ⁶⁰Co γ-ray irradiation of aqueous solutions of ironporphyrin complex and a water soluble monomer such as 2-hydroxyethylmethacrylate or 1-vinyl-2-pyrrolidone. The iron(II)porphyrin complex was immobilized in the film by covalent bonding without any denaturation, under anaerobic condition or by protection of the ironporphyrin complex with carbon monoxide. After the irradiation of iron(III)porphyrin, the central iron ion was reduced spontaneously to the ferrous state. The films containing the iron(II)porphyrin adsorbed quantitatively carbon monoxide gas.     

Electropolymerization of iron tetra(<Emphasis Type="Italic">o</Emphasis>-aminophenyl)porphyrin from aqueous solution and the electrocatalytic behavior of modified electrode

Stable electroactive iron tetra(o-aminophenyl)porphyrin (FeTAPP) films are prepared by electropolymerization from aqueous solution by cycling the electrode potential between −0.4 and 1.0 V vs Ag/AgCl at 0.1 V s⁻¹. The cyclic voltammetric response indicates that polymerization takes place after the oxidation of amino groups, and the films could be produced on glassy carbon (GC) and gold electrodes. The film growth of poly(FeTAPP) was monitored by using cyclic voltammetry and electrochemical quartz crystal microbalance. The cyclic voltammetric features of Fe(III)/Fe(II) redox couple in the film resembles that of surface confined redox species. The electrochemical response of the modified electrode was found to be dependent on the pH of the contacting solution with a negative shift of 57 mV/pH. The electrocatalytic behavior of poly(FeTAPP) film-modified electrode was investigated towards reduction of hydrogen peroxide, molecular oxygen, and chloroacetic acids (mono-, di-, and tri-). The reduction of hydrogen peroxide, molecular oxygen, and dichloroacetic acid occurred at less negative potential on poly(FeTAPP) film compared to bare GC electrode. Particularly, the overpotential of hydrogen peroxide was reduced substantially. The O₂ reduction proceeds through direct four-electron reduction mechanism.     

Electrochemical formation of cation-exchanging polypyrrole films within various hydrophilic–hydrophobic domains

The electrochemical polymerization technique has been successfully applied to produce conducting polymer film of controlled ion exchange properties. Polypyrrole films were prepared by electro-oxidative polymerization with doping some alkylsulfonates or Nafion. The ion exchange characteristics across polypyrrole films were examined by means of a novel electrochemical technique, namely, the in situ electrochemical quartz crystal microbalance (EQCM) method. According to EQCM measurements, exchanging ion species was found to be successfully controlled by changing the hydrophilic–hydrophobic balance of the incorporated sulfonated-based dopants. The film's characteristics became anion- to cation-exchanging as the dopants became more hydrophobic in nature. The polypyrrole–Nafion(poly(perfluoroethylene sulfonate)) composite film became to be a complete cation exchanger.     

Dip and wait: a facile route to nanostructured porphyrin films for QCM functionalization

A facile and straightforward way to deposit nanostructured porphyrin films onto quartz surfaces is presented. The particular peripheral functionalization on the macrocycle is exploited to drive the formation of aggregates in solution, which then spontaneously deposit as ordered solid layers. Film deposition is then achieved by simple dipping the quartz slide into a solution containing porphyrin aggregates and waiting the formation of the related thin films. QCMs covered with different metalloporphyrin derivatives have been exposed to some model VOCs, showing in general good performances especially in all the cases where film morphology is fundamental for sensing interactions.     

氧在铁卟啉/聚吡咯膜修饰电极上的还原

用旋转环盘电极技术研究含中位四（ 对磺基苯基） 卟啉合铁（ＦｅＴＰＰＳ） 的聚吡咯膜覆盖的玻碳电极上的氧还原过程． 结果表明该修饰膜的存在降低了氧还原的过电位,还原产物中有Ｈ２Ｏ２ ,过程用异相氧化还原催化（ＥＣ） 机理解释． 与金或铂比较,碳是较好的电极基体材料,适合于产生破坏水中有机物所需的过氧化物． 在酸性介质中氧在该膜修饰电极上的还原速度比在中性介质中大,由ＫｏｕｔｅｃｋｙＬｅｖｉｃｈ 关系式求出修饰膜中催化剂和分子氧反应的表观速度常数值．     

Molecular deposition film of porphyrin and phthalocyanine bearing oppositely charged substituents

Ｔｈｅｆｏｒｍａｔｉｏｎｏｆａｎｅｗｔｙｐｅｏｆｓｅｌｆ＿ａｓｓｅｍｂｌｅｄｍｕｌｔｉｌａｙｅｒｆｉｌｍｓ,ｍｏｌｅｃｕｌａｒｄｅｐｏｓｉｔｉｏｎ(ＭＤ)ｆｉｌｍｓ[1,2],ｉｓａｆａｓｔｄｅｖｅｌｏｐｉｎｇａｒｅａｏｆｔｈｉｎｆｉｌｍｒｅｓｅａｒｃｈ.Ｔｈｉｓｎｅｗｍｅｔｈｏｄｏｆｆｉｌｍｐｒｅｐａｒａｔｉｏｎｉｓｂａｓｅｄｏｎｉｏｎｉｃａｔｔｒａｃｔｉｏｎｂｅｔｗｅｅｎｏｐｐｏｓｉｔｅｃｈａｒｇｅｄｃｈｒｏｍｏｐｈｏｒｅｓ.ＩｎｃｏｍｐａｒｉｓｏｎｗｉｔｈｔｈｅｃｌａｓｓｉｃＬａｎｇｍｕｉｒ＿Ｂｌｏ…     

EQCM studies on polypyrrole in aqueous solutions

Electrochemical quartz crystal microbalance (EQCM) studies revealed that the electrochemical properties of polypyrrole (PPY) in aqueous solutions are greatly dependent on the solution pH. A PPY film immersed in an aqueous KCl solution shows redox processes which involve not only anion transport but also cation transport if the solution pH is greater than 3–4, whereas at lower pH values only anion transport prevails as has been widely recognized. It has been found from comparative studies using poly(N-methylpyrrole) that protonation and deprotonation at nitrogen atoms of PPY play a key role in the observed pH-dependent electrochemical behavior. Deprotonated PPY allows transient incorporation of hydrated cations upon reduction in weak alkaline aqueous solutions, followed by slow ejection of the incorporated cations when conventional electrolytes such as KCl and NaClO₄ are used, but not in NH₄Cl solution. Discussion on the cation transport in PPY is made in terms of deprotonation and protonation of nitrogen atoms of pyrrole subunits in PPY.     

Investigation by QCM of the Specific and Nonspecific Avidin Interaction onto a Biotinylated Polypyrrole Film

We have studied by gravimetric measurements using a quartz crystal microbalance (QCM), the adsorption of avidin onto a polypyrrole film. From QCM results, it appears that both the thickness and the redox state of polypyrrole strongly influence the avidin adsorption. This nonspecific interaction is larger for a thick film than for a thin one and, also for when the polymer is in its reduced state. We have also investigated by QCM the specific and nonspecific interaction of avidin onto biotinylated polypyrrole films having either a hydrophilic or hydrophobic character. It is shown that the amount of avidin immobilized by specific recognition is almost the same whatever the nature of the polymer matrix.     

Enhancement of response by incorporation of platinum microparticles into a polypyrrole-glucose oxidase electrode

Platinum was incorporated into a polypyrrole/glucose oxidase electrode by immersion in a hexachloroplatinate(IV) solution after electrochemical oxidation of the polypyrrole film; dispersed platinum was then formed by electrochemical reduction. The platinized electrode reproducibly yielded a response to glucose (20 mM) which was typically about 40% higher than that obtained in the absence of platinum microparticles in the polypyrrole/glucose oxidase film.     

Structure and redox properties of electropolymerized film obtained from iron meso‐tetrakis(3‐thienyl)porphyrin

Oxidative polymerization of bromoiron(III) meso‐tetrakis(3‐thienyl)porphyrin gave a novel polymeric porphyrin complex randomly crosslinked at the 2,5‐positions of the peripheral thienyl groups. The electrical semiconductivity of ca. 10^?5 S/cm after I₂ doping indicated that the polymer had a π‐conjugated structure with a moderate delocalization of π electrons over the thienylporphyrin units. PM3 calculations for free‐base models revealed that HOCO (the highest occupied crystal orbital) band width was reduced by introduction of the porphyrin moieties into the thienylene backbone and yet low HOCO‐LUCO (the lowest unoccupied crystal orbital) gap was maintained, which accounted for the relatively low electrical conductivity of the porphyrin polymer. The modified electrode prepared by electropolymerization was redox‐active due to the presence of iron(II/III) couple and the semiconductivity of the film, which served as a novel non‐enzymatic electrochemical sensor for superoxide anion radical based on the facile electrocatalytic oxidation of the superoxide. Copyright © 2005 John Wiley & Sons, Ltd.     

Reactivity of Nickel(II) Porphyrins in oCVD Processes—Polymerisation,Intramolecular Cyclisation and Chlorination

Oxidative chemical vapour deposition of (5,15-diphenylporphyrinato)nickel(II) (NiDPP) with iron(III) chloride as oxidant yielded a conjugated poly(metalloporphyrin) as a highly coloured thin film, which is potentially useful for optoelectronic applications. This study clarified the reactive sites of the porphyrin monomer NiDPP by HRMS, UV/Vis/NIR spectroscopy, cyclic voltammetry and EPR spectroscopy in combination with quantum chemical calculations. Unsubstituted meso positions are essential for successful polymerisation, as demonstrated by varying the porphyrin meso substituent pattern from di- to tri- and tetraphenyl substitution. DFT calculations support the proposed radical oxidative coupling mechanism and explain the regioselectivity of the C−C coupling processes. Depositing the conjugated polymer on glass slides and on thermoplastic transparent polyethylene naphthalate demonstrated the suitability of the porphyrin material for flexible optoelectronic devices.     

对甲苯磺酸掺杂聚吡咯的合成、表征及其对金属镁的防腐蚀性能研究

以对甲苯磺酸为掺杂剂, 三氯化铁为氧化剂, 化学氧化吡咯制备了对甲苯磺酸掺杂聚吡咯. 考察了掺杂剂与氧化剂的用量对掺杂聚吡咯电导率的影响, 得到了高电导率聚吡咯的优化条件, 用UV, IR和SEM对其结构和形貌进行了表征. 结果表明, n(对甲苯磺酸)∶n(吡咯)∶n(三氯化铁)＝0.75∶1∶0.5时, 合成的聚吡咯的形貌规则, 电导率达42.7 S•cm^－1. 以聚吡咯为功能成分, 环氧树脂为成膜物质, 得到一种功能膜, 旋涂于金属镁表面, 采用极化曲线和开路电位考察了含有聚吡咯的膜层对金属镁的防腐蚀性能. 结果表明, 含有聚吡咯的膜层对金属镁有很好的防腐蚀性能, 腐蚀电流为0.0981 A, 腐蚀电位为－0.88 V, 在膜层与金属镁之间形成了一层钝化膜.     

卟啉在纯铁表面上的化学与电化学修饰

通过在卟啉的丙酮－水溶液中循环阳极电位扫描，在工业纯铁表面形成一层修饰层．此修饰层呈淡黄色，结晶细密．与基体结合牢固，耐腐蚀性能良好．质谱分析及反射红外分析说明有铁卟啉螯合物生成．若将工业纯铁直接浸入卟啉的丙酮－水溶液中，其表面同样也可形成一层修饰膜, 此膜较之电化学修饰层疏松而厚．卟啉在纯铁表面的电化学修饰层与化学修饰膜的形成机制有着本质的不同．     

Electrochemistry and electrochromic properties of phenanthroline-iron(II/III) complex films

New films of the iron complexes with bis((2-hydroxyphenyl)methylaminosulfonyl)bathophenanthroline(HPBP) and bis((2-aminophenyl)methylaminosulfonyl)bathophenanthroline(APBP) ligands are prepared on the electrode surfaces by electrochemical polymerization. The resulting film-coated electrode shows a well-defined reversible voltammogram corresponding to the redox reaction of the Fe(II/III) complexes and an electrochromic change from red(absorption maximum: 540 nm) to colorless. The response rate of the color change to a potential step was found to be correlated to the apparent diffusion coefficient(Dapp) for the homogeneous charge-transport process within the film. The Dapp values estimated are (3-4) × 10⁻⁹cm²s⁻¹ for the [Fe(APBP)₃] film and(1-2) × 10⁻⁸cm²s⁻² for the [Fe(HPBP)₃] film, respectively, by potential-step chronoamperometric and chronocoulometric methods. The result of electrochemical quartz crystal microbalance(EQCM) measurements⁴) and dependence of the formal potential of the metal complex of the Fe(II/III) redox couple with activity of the supporting electrolyte anion in NaClO₄ aqueous solution showed that anion, cation, and solvent move simultaneously across the polymer film/solution interface during the redox reaction. A piezoelectric admittance measurement⁴⁾ of the poly[Fe(APBP)₃] coated quartz crystal electrode showed that the viscosity of the film is affected by the oxidation state of iron.     

Electrocatalytic Hydrogen Evolution by Water-Soluble Cobalt (II), Copper (II) and Iron (III) meso-Tetrakis(carboxyl)porphyrin

Three water-soluble carboxyl metalloporphyrins, cobalt (II), copper (II) and iron (III) meso-tetrakis (carboxyl) porphyrin were prepared and applied as homogeneous electrocatalysts for hydrogen evolution reaction (HER) with acetic acid, trifluoroacetic acid, p-toluene sulfonic acid and water as proton sources. Cyclic voltammetry (CV) results revealed the HER underwent different routes for these metalloporphyrins. Electrocatalysis tests in buffer solution of pH=7.0 showed the TOFs of cobalt (II), copper (II) and iron (III) meso-tetrakis (carboxyl) porphyrin were 184.78, 160.28 and 184.87 mol⁻¹ ⋅ h⁻¹ and the faradaic efficiency were 94.37 %, 93.01 % and 96.98 % at an overpotential of 788 mV, respectively. These results indicate the synthesized metal carboxyl porphyrins have good electrocatalytic activity for HER.     

Iron porphyrins-catalysed oxidation of α-alkyl substituted mono and dimethoxylated benzyl alcohols

The mechanisms of oxidation of a series of a-alkyl substituted mono and dimethoxylated benzyl alcohols catalysed by mesotetrakis(4-N-methylpyridynium)porphyrin iron (III) chloride (FeTMPyPCl) and meso-tetrakis(4-sulfonatophenyl)porphyrin iron (III) chloride (FeTSPPCl) in aqueous solution with KHSO₅ as oxygen atom donor and by meso-tetrakis(pentafluorophenyl)-porphyrin iron (III) chloride (FeTPFPPCl) in dichloromethane employing iodosylbenzene as oxidant have been investigated. In the highly polar aqueous medium an electron transfer mechanism is operating. With FeTMPyPCl, which is a much more efficient catalyst than FeTSPPCl due to the presence of stronger electron withdrawing substituents, formation of side-chain oxidation products accompanies generation of nuclear oxidation products. In the low polar solvent dichloromethane, two competing mechanism have been suggested: hydrogen atom transfer and formation of a complex between the active species iron-oxo porphyrin radical cation and the substrate.