Polymer-Supported 4-Aminoformoyldiphenylammonium Triflate (PS-AFDPAT): An Effective and Recyclable Catalyst for the Biginelli Reaction

Polymer-supported 4-aminoformoyldiphenylammonium triflate (PS-AFDPAT) was used as an effective catalyst for the synthesis of 3,4-dihydropyrimidin-2(1H)-ones (DHPMs) via the Biginelli reaction. This immobilized catalyst could be easily recovered by simple filtration and recycled for 10 runs without significant decrease of the catalytic activity.     

Regiospecific Displacement of the C-B Bond of Tris[4-(substituted)furan-3-yl]boroxines with C-Sn Bond and C-O Bond: Syntheses of 3,4-Disubstituted Furans and 4-Substituted-3(2H)-furanones,

Tris[4-(substituted)furan-3-yl]boroxines 2 , prepared from the corresponding 4-(substituted)-3-(trimethylsilyl) furan 1, were converted successfully to 4-(substituted)-3-(tributylstannyl)furans 3 through palladium-catalyzed cross-coupling reactions with tributylstannyl chloride. Palladium-catalyzed cross-coupling reactions of 3 with organohalides afforded 3,4-disubstituted furans 4 . Regiospecific iodination of 4-(trimethylsilyl)-3-((tributylstannyl) furan ( 3a ) gave 4-iodo-3-(trimethylsilyl)furan ( 5 ), which reacted with excess ethyl acrylate under a common Heck-condition to produce 2,3-bis(trans-ethoxycarbonylvinyl)-4-(trimethylsilyl)furan ( 6 ). A thermal 6-electrocyclic reaction followed by dehydration converted 6 into benzo[2,3-6]furan 8 . Oxidation of 2 generated the corresponding 4-substituted-3(2H)-furanones 9 .     

β-Selective Glucosylation in the Absence of Neighboring Group Participation: Influence of the 3,4-O-Bisacetal Protecting System

A 3,4-O-bisacetal 2,6-di-O-benzyl protected thioglucoside is converted to the corresponding glucosyl triflate with 1-benzenesulfinyl piperidine and trifluoromethanesulfonic anhydride. The moderate to excellent β-selectivity exhibited with this glucosyl triflate with a range of alcohols is generally higher than that observed with the more electronically disarmed corresponding 3,4-O-carbonate, for which a possible reason is advanced.     

Phenyliodine(III) Triflate Mediated Synthesis of 5‐Benzoyldihydro‐2(3H)‐furanones

A direct and efficient method for the preparation of 5‐benzoyldihydro‐2(3H)‐furanones was realized by cyclization of 4‐benzoylbutyric acids in the presence of phenyliodine(III) triflate.     

Synthesis and herbicidal activity of novel 6-arylthio-3-methylthio-1H-pyrazolo[3,4-d]pyrimidin-4(5H)-ones

A series of pyrazolo[3,4-d]pyrimidine-4-one derivatives was conveniently synthesized via tandem aza-Wittig and annulation reactions of the corresponding iminophosphoranes, arylisocyanate, and substituted thiophenols. The structures of the target compounds were confirmed by IR, ¹H NMR, ¹³C NMR, LC-MS, and elemental analysis. The preliminary bioassay demonstrated that some title compounds such as 6-(3-chlorophenylthio)-1-phenyl-3-methylthio-5-(4-chlorophenyl)-1H-pyrazolo[3,4-d]-pyrimidin-4(5H)-one and 6-(4-fluorophenylthio)-1-phenyl-3-methylthio-5-(3-chlorophenyl)-1H-pyrazolo[3,4-d]pyrimidin-4(5H)-one showed good inhibition activities against the root of Brassica napus (rape) and Echinochloa crusgalli (barnyard grass) at a dosage of 100 mg/L.     

Synthesis of Some New Pyrazolo[3,4-b]Pyridlne and Pyrazolo[3,4-d]Pyrimidine Derivatives1

Several pyrazolo[3,4-b]pyridine (3,4) and pyrazolo-[3,4-d]pyrimidine (5-13) derivatives were prepared using 5-amino-l-(5-ethyl-5H-1,2,4-triazino[5,6-b]-indol-3-yl)-lH-pyrazole-4-carbonitrile (2) . The pyridine derivatives 3 and 4 were obtained by reaction of 2 with malononitrile and ethyl cyanoacetate, respectively, while pyrimidine analogs 5-13 were synthesized cither by a one-step or multi-step sequence.     

The Structure of the High Temperature Modification of Lithium Triflate (γ-LiSO3CF3)

The high temperature modification of lithium triflate (γ-LiSO₃CF₃) crystallises in the orthorhombic space group Cmca with the lattice parameters a = 6.3022(4), b = 8.6989(5), and c = 20.1262(14) Å (synchrotron powder diffraction data, T = 456 K). The crystal structure of γ-LiSO₃CF₃ is disordered, in the cationic as well as the anionic partial structure, and exhibits double layers of triflate anions with the lipophilic CF₃-groups facing each other. The lithium ions could not be located by the diffraction experiment due to their high mobility. The staggered triflate anion is twofold disorderd leading to two different positions on top of each other which are tilted to one another.     

Studies on silyl furans. II. Halodesilylation of 2-trimethylsilyl-3,4-bis(methoxycarbonyl)furans

Reactions of 2-trimethylsilyl-3,4-bis(methoxycarbonyl)furans 1a,b with sulfuryl chloride, bromine, and iodine monochloride in acetonitrile afforded the corresponding 2-halo-3,4-bis(methoxycarbonyl)furans 2a-f via chloro-, bromo-, and iododesilylation in good yields, respectively. However, the reaction of 1a with bromine in carbon tetrachloride mainly gave 2-bromo- 2b and 2-bromo-5-trimethylsilyl-3,4-bis(methoxycarbonyl)furan ( 3 ) in 37% and 45% yields. Similarly, the reaction of 1a with iodine monochloride afforded 1a , 2-chloro- 2a and 2-iodo-3,4-bis(methoxycarbonyl)furan ( 2c ) in 50%, 27%, and 23% yield.     

Pyridazine Derivatives and Related Compounds,Part 1. Some Reactions with 4-Cyano-5,6-Diphenyl-2,3-Dihydropyridazine-3-One

4-Cyano-5,6-diphenyl-2,3-dihydropyridazine-3-onc 1 reacts with phosphorous oxychloride to give 70% of the corresponding 3-chloro derivative 2. Treating 2 with anthranilic acid in butanol, 4-cyano-2,3-diphenyl-10H-pyridazino[6,1-b]quinoxaline-10-one, 3 was obtained. Compound 1 reacts with phosphorous pentasulphide to give 3-mercapto derivative 4, which was converted by acrylonitrile to S-(2-cyanoethyl)pyridazine derivative 5. Compound 4 reacts with ethyl bromoacetate and with phenacyl bromide gave the corresponding thieno[2,3-c] pyridazine derivatives 8, 9, Alkylation of 1 with ethyl chloroacetate afforded 3-0-carbethoxymethyl derivative 10. Compound 10 reacts with amines (aniline, hydrazine) to give the corresponding amide and acid hydrazide 13, 12 respectively. Hydrolysis of 10 with sodium hydroxide gave the corresponding acid derivative 11. Treating 1 with methyl iodide, 3-0-methyl derivative 14 was obtained, which was converted by ammonium acetate/acetic acid to 3-amino-4-cyano-5,6-diphenyl pyridazine 15. Compound 1 reacts with methyl magnesium iodide gave 4-acetyl derivative 16, which was reacted with hydrazine, phenyl hydrazine and with hydroxylamine to give the substituted I H pyrazolo [3,4-c] pyridazine 17 a,b and isoxazolo [5,4-c] pyridazine 18 derivatives respectively.     

A facile synthesis of 3,4-homoadamantanediol via the reaction of 1-adamantyl triflate with carbon monoxide

The reaction of 1-adamantyl triflate ($\text{1}$) with carbon monoxide and adamantane catalyzed by triflic acid affords 3-hydroxy-4-homoadamantyl 1-adamantanecarboxylate ($\text{2}$) as a major product, which is easily converted to 3,4-homoadamantanediol ($\text{5}$) — a promising starting material for 3,4-bifunctional homoadamantane derivatives.     

Improvement of the Friedel–Crafts benzoylation by using bismuth trifluoromethanesulfonate in 1-butyl-3-methylimidazolium trifluoromethanesulfonate ionic liquid under microwave irradiation

Bismuth trifluoromethanesulfonate (bismuth triflate) catalyzed the Friedel–Crafts benzoylation of activated aromatic compounds when dissolved in 1-butyl-3-methylimidazolium trifluoromethanesulfonate ([BMIM]OTf) ionic liquid. Immobilization of bismuth triflate (5 mol %) in [BMIM]OTf allowed the synthesis of aryl ketones in good to excellent yields with short reaction times under microwave irradiation. This catalytic system was easily recovered and reused several times without any significant loss of the activity.     

Highly diastereoselective cycloaddition reactions of variously substituted 1-thia- and 1-thia-3-aza-buta-1,3-dienes. Synthesis of enantiomerically pure 5,6-dihydro-4H-[1,3]thiazines and 3,4-dihydro-2H-thiopyrans

The cycloaddition of 2- or 2,3-substituted 1-thia- and 1-thia-3-aza-4-dimethylamino-buta-1,3-dienes with various dienophiles in the presence of a Lewis acid provides a rapid and diastereoselective access to the 3,4-dihydro-2H-thiopyran and 5,6-dihydro-4H-[1,3]thiazine backbones. The generally observed trans relationship between the two newly created strereogenic centres was demonstrated to be the expression of a thermodynamic control of the reaction. The use of chiral dienophile derived from chiral oxazolidin-2-ones allowed us to prepare enantiopure 5,6-dihydro-4H-[1,3]thiazines and 3,4-dihydro-2H-thiopyrans. In the asymmetric synthetic process the chiral auxiliary removal step was best accomplished in the presence of samarium triflate in methanol.     

Bi（OTf）3-catalyzed tandem reaction of naphthols with β,γ-unsaturated α-ketoesters. Efficient synthesis of functionalized 4H-chromenes

An efficient synthesis of functionalized 4H-chromenes by the tandem reaction of β,γ-unsaturated α- ketoesters with 2-naphthols, 1 -naphthols, and 1,3-dihydroxynaphthalenes has been accomplished with high selectivity and excellent yields in the presence of a catalytic amount of bismuth triflate [Bi（OTf）3, 5 mol%] under mild conditions. The functionalized 4H-chromene synthesis and our previous 2H- chromene hemiacetal synthesis could complement each other to enrich reaction diversity.     

Synthesis of 3-methyl-coumarins, -thiacoumarins and -carbostyrils

Reaction of 3,6-dimethyl-4-phenyl-3,4-dihydrocoumarin5a with anhydrous aluminum chloride gave 3,6-dimethyl-coumarin (6a); likewise, 6-chloro-3-methyl-coumarin (6b) was obtained from5b. Substituted 3-methyl-thiacoumarins (8a,b and 3-methyl-carbostyrils (10a-e) were prepared from the reactions of the respectivea-methyl-cinnamoyl derivatives (7a,b and (9a-e), of thiophenols and anilines.     

A convenient method for the preparation of 3-trimethylsilyl-2,5-dihydrofurans and their conversion to furans

Hydromagnesiation of 3-trimethylsilyl-2-propyn-1-o1 (1) followed by reaction with aldehydes or ketones affords (E)-3-trimethylsilyl-2-alken-1,4-diols (2), which can be readily dehydrated to 3-trimethylsilyl-2,5-dihydrofurans (3) by treatment with BF₃OEt₂. The compounds (3) are converted to furans (5) by epoxidation and subsequent treatment with H₂SO₄.     

TiO2 Nanoparticles Immobilized on Carbon Nanotubes: An Efficient Heterogeneous Catalyst in Cyclocondensation Reaction of Isatins with Malononitrile and 4-Hydroxycoumarin or 3,4-Methylenedioxyphenol under Mild Reaction Conditions

TiO₂ nanoparticles supported on carbon nanotubes (TiO₂-CNTs) as an efficient heterogeneous catalyst was used for the synthesis of spiro[3,4′]1,3-dihydro-2H-indol-2-one-2′-amino-5′-oxo-4'H,5'H-pyrano[3′,2′-c]chromen-3′-yl cyanides and spiro[3,8′]1,3-dihydro-2H-indol-2-one-6′-amino-8'H-[1′,3′]dioxolo[4′,5′-g]chromen-7′-yl cyanides via the cyclocondensation reaction of isatins with malononitrile and 4-hydroxycoumarin or 3,4-methylenedioxyphenol in aqueous media at room temperature. This reaction offers several sustainable and economic benefits such as high yields of products, convenient operation, and use of non-toxic catalyst in water media.     

The Use of 4-(Bromomethylene)-5,5-dimethyl-1,3-dioxolan-2-one as “Masked” α-Bromo-α'-Hydroxy Ketone in the Synthesis of Heterocyclic Systems

4-(Bromomethylene)-5,5-dimethyl-1,3-dioxolan-2-one was obtained on the basis of the readily obtainable 4-methylene-5,5-dimethyl-1,3-dioxolan-2-one. It forms 2-imidazo[1,2-a]pyridin-2-yl-2-propanol with 2-aminopyridine, 11a-hydroxy-1,1-dimethyl-3-oxo-1,5,11,11a-tetrahydro[1,3]oxazolo[3,4-a]pyrido[1,2-d]-10-pyrazinium bromide with 2-(aminomethyl)pyridine, and the corresponding derivative of 4-hydroxyoxazolidin-2-one with 2-(3,4-dimethoxyphenyl)ethylamine. The last product was converted by intramolecular amidoalkylation without isolation into 10b-(bromomethyl)-8,9-dimethoxy-1,1-dimethyl-1,5,6,10b-tetrahydro[1,3]oxazolo[3,4-a]isoquinolin-3-one.     

Bismuth(III) Triflate: A Safe and Easily Handled Precursor for Triflic Acid: Application to the Esterification Reaction

A series of carboxylic acids were converted into their corresponding methyl esters using bismuth(III) triflate as a catalyst in methanol. Good to excellent yields were obtained for different aliphatic or aromatic starting materials. In the reaction, bismuth triflate acts as a precursor that, upon hydrolysis, liberates sufficient triflic acid to catalyze the esterification.     

Synthesis of 4-Amino-6-R-4,5-dihydro-3-phenacylthio-1,2,4-triazin-5-ones and 8H-3-R-7-Aryl-1,2,4-triazino[3,4-b][1,3,4]thiadiazin-4-ones

A study was carried out on the reaction of 4-amino-6-R-2,3,4,5-tetrahydro-3-thioxo-1,2,4-triazin-5-ones with halo ketones in alkaline media to yield 4-amino-6-R-4,5-dihydro-3-phenacylthio-1,2,4-triazin-5-ones, which then convert to 8H-3-R-7-aryl-1,2,4-triazino[3,4-b][1,3,4]thiadiazin-4-ones.     

Synthesis of some novel 5-substituted benzamido-6-arylamino-pyrazolo[3,4-D]pyrimidin-4-one derivatives for herbicidal activity

Abstract

Sixteen novel 3-methylthio-5-substituted benzamido-6-arylamino-1-phenyl-1H-pyrazolo[3,4-d]pyrimidin-4 (5H)-one derivatives (4a–p) were successfully synthesized from iminophosphoranes, aryl isocyanate, and substituted benzoylhydrazine. The structures of the title compounds were elucidated by FT-IR, ¹H NMR, ¹³C NMR, and HRMS. Herbicidal activity of the compounds 4a–p against Brassica napus (rape), Echinochloa crusgalli (barnyard grass), Cucumis sativus (cucumber), and Triticum aestivum (wheat) were determined. The results showed that 5-(2-chlorobenzamido)-6-phenylamino-3-methylthio-1-phenyl-1H-pyrazolo[3,4-d]pyrimidin-4 (5H)-one (4c) displayed remarkable inhibition activity against the stalk and root of rape with 100% inhibition rate at the dosages of 10?mg/L and 100?mg/L, and 5-(4-nitrobenzamido)-6-phenylamino-3-methylthio-1-phenyl-1H-pyrazolo[3,4-d]pyrimidin-4 (5H) -one (4d) exhibited excellent activity against the stalk and root of barnyard grass with 100% inhibition rate at the same dosages.