Comparison of sample preparation methods based on proteolytic enzymatic processes for Se-speciation of edible mushroom (Agaricus bisporus) samples

A sequential sample preparation process was developed for the speciation analysis for Se-enriched edible mushroom, Agaricus bisporus containing 110.2 mug of total Se/g sample. Five different sample extraction methods were compared and the most efficient method (a three-step process involving the use of water extraction and two proteolytic enzymes - pepsin and trypsin) proved to be the most suitable for extracting selenium, with an extraction efficiency of 75%. As the analogues of these enzymes play an important role in human digestion the bioavailability of the selenium present in the sample was estimated. Selenocystine (SeCys(2)) and Se(IV) were detected in considerable amounts (27.7 mug Se/g sample and 46.4 mug Se/g sample, respectively). For the quality control of peak identification a spiking procedure was developed, using a low selenium mushroom containing 4.3 mug of total Se/g sample. During the analysis with HPLC-HHPN (Hydraulic High Pressure Nebuliser)-AFS complicated background effects and matrix problems were observed: stable and reproducible signals generated by the low selenium mushroom and the compounds used in sample preparation were detected. The three-step sample preparation method connected with the HPLC-HHPN-AFS system proved to be applicable for the speciation analysis of the Se-enriched Agaricus bisporus.     

Enzymatic probe sonication extraction of Se in animal-based food samples: a new perspective on sample preparation for total and Se speciation analysis

This paper describes a fast, simple and novel extraction method for total selenium and selenium species determination in food samples. Parameters influencing extraction, such as sonication time, extracting media, temperature, sample mass, ultrasound amplitude and sample/enzyme mass ratio were investigated. The enzymatic hydrolysis proposed, enhanced by probe sonication, allowed the quantitative extraction of selenium in chicken muscle, liver, kidney and feed (97, 93, 95 and 102%, respectively) in 2 min, maintaining the original Se-species integrity. Total Se content of the samples was determined using inductively coupled plasma mass spectrometry. Se-species were identified and quantified using high-performance liquid chromatography in conjunction with inductively coupled plasma mass spectrometry. Chromatographic analyses were carried out under two chromatographic conditions and led to the identification of SeMet in all samples. The accuracy of the proposed method was assessed using certified reference materials as well as microwave digestion. Potential advantages of the proposed method over traditional hydrolysis are speed, simplicity and safety of the procedure.     

利用微波消解和高效液相色谱荧光检测法测定环境水样中痕量硒

基于微波消解和正相液相色谱－荧光检测测硒法,实现了对环境水样中亚纳克级硒的测定。考察了ＨＮＯ３和Ｈ２ＳＯ４－Ｈ２Ｏ２两种消化体系及其工作条件,方法检出限分别可达 ７．２和 １０．４ ｐｇ Ｓｅ,对标准参考物质的回收率分别为９９．４±２．０和９７．８±２．５％,在０～１．５ｎｇＳｅ范围内有线性关系（Ｒ２＜０．９９６）。对北京地区 ４种不同类型水体水样含硒量进行了分析测定（２ｍＬ样品）,其浓度范围为 ０．２０～０．９０μｇ／Ｌ,标准加入回收率为９９．１％～１０３．４％。     

Microwave digestion of fish tissue for selenium determination by differential pulse polarography

In KIO(3)NH(3)NH(4)Cl medium, the selenium complex Se(O)SO(2-)(3), resulted from the reaction of selenite and sulphite in acid solution, gave a catalytic wave, which was applied to the determination of selenium in fish by differential pulse polarography. The sample was decomposed using the HNO(3)/H(2)SO(4)/H(2)O(2) digestion mixture in a closed PTFE digestion vessel with microwave heating. The detection limit was 0.06 mug/dm(3). The calibration curve was linear up to 8 mug/dm(3). Selenate present was reduced with hot hydrochloric acid to selenite. The recoveries of the selenite and selenate in two spiked samples investigated ranged from 91 to 104%. The NIES CRM No. 6 mussel was analyzed and the results obtained agreed well with the reference value (reference value: 1.5 mug/g; found: 1.43 +/- 0.05 mug/g). The results obtained by differential pulse polarography were in good agreement with those found by hydride generation atomic absorption spectrometry.     

Selenium speciation by coupling vesicle mediated HPLC with off-line ETAAS and on-line focused microwave digestion HG-AAS detection

A novel High Performance Liquid Chromatography (HPLC) method for the separation of selenium species with specific detection by off-line Electrothermal Atomization Atomic Absorption Spectrometry (ETAAS) or on-line focused microwave digestion (MW) Hydride Generation Atomic Absorption Spectrometry (HG-AAS) is described. Vesicular mobile phases of the cationic surfactant didodecyldimethylammonium bromide (DDAB) have been evaluated for the liquid chromatographic separation of inorganic selenium (selenite and selenate) and different selenoaminoacids (selenocystine, selenomethionine and selenoethionine) on a C(18) reversed-phase column modified by DDAB molecules. The effects of different parameters (pH, buffer and vesicle concentrations) of the mobile phase on the retention times have been determined. The detection limit for selenium with the proposed off-line HPLC-ETAAS method has been found to be 5 microg/L of Se. The detection limit using HPLC-"on line" focused microwave digestion-HG-AAS has been found to be 1 microg/L of Se, with a precision (repeatability) better than +/- 5%. The latter proved to be an exceptional on-line real-time chromatographic detector for selenium speciation purposes.     

Determination of the enantiomeric purity of amphetamine after derivatization with Sanger’s reagent (2,4-dinitrofluorobenzene [DNFB]) by simultaneous dual circular dichroism and ultraviolet spectroscopy

Determination of Se in biological materials was attempted by microwave-induced plasma mass spectrometry (MIP-MS). (1) Serum samples were available after 10 times dilution with 0.5% nitric acid solution containing 0.1% Triton X-100. When oxygen gas was inserted into the plasma gas (nitrogen) in order to improve the combustion, the sensitivity was reduced to 45%. The detection limit of this method was 0.5 ng/mL. (2) Standard reference materials on commercial base were used to evaluate the accuracy of the Se determination by MIP-MS after microwave digestion. In samples like bovine liver and human hair with Se concentrations of more than 0.7 μg/g, the standard curve method after internal standard (IS) correction was acceptable. This procedure was unsuitable for samples with low Se concentrations such as milk powder (certified value of Se 0.11 μg/g), or plant leaf samples. (3) Instead of IS correction, the peak height of the spectrum was used for calculations from the matrix matched calibration curve. The results of all materials were close to the certified values, even at 25 ng/g. The detection limit of the MIP-MS with microwave digestion and IS correction was 0.05 ng/mL in standard solutions. The detection limit of the peak height method was 0.1 ng/mL and was estimated to be < 20 ng/g in plant materials.     

Determination of arsenic,selenium and mercury in an estuarine sediment standard reference material using flow injection and atomic absorption spectrometry

A flow-injection analysis atomic absorption spectrometric (FIA-AAS) method was developed for the determination of trace amounts of arsenic, selenium and mercury in a proposed estuarine sediment standard reference material (SRM 1646a). The samples were prepared in two manners: a) A wet digestion procedure with HNO₃, H₂SO₄, and HClO₄ using a reflux column and b) A microwave-oven digestion procedure utilizing HNO₃, H₂SO₄, and HCl for As and Se, and HNO₃ for Hg. Microwave-oven digestion provides results comparable to those found by reflux column digestion and reduces the sample preparation time by a factor of 10. The proposed method employing the microwave-oven digestion procedure coupled with FIA-AAS for As and Se, and FIA-CVAAS for Hg, has detection limits of 0.15 ng As/ml, O.17 ng Se/ml and 0.15 ng Hg/ml.On leave from the Defense Metallurgical Research Laboratory, Hyderabad, India     

Determination of the enantiomeric purity of amphetamine after derivatization with Sanger’s reagent (2,4-dinitrofluorobenzene [DNFB]) by simultaneous dual circular dichroism and ultraviolet spectroscopy

Determination of Se in biological materials was attempted by microwave-induced plasma mass spectrometry (MIP-MS). (1) Serum samples were available after 10 times dilution with 0.5% nitric acid solution containing 0.1% Triton X-100. When oxygen gas was inserted into the plasma gas (nitrogen) in order to improve the combustion, the sensitivity was reduced to 45%. The detection limit of this method was 0.5 ng/mL. (2) Standard reference materials on commercial base were used to evaluate the accuracy of the Se determination by MIP-MS after microwave digestion. In samples like bovine liver and human hair with Se concentrations of more than 0.7 μg/g, the standard curve method after internal standard (IS) correction was acceptable. This procedure was unsuitable for samples with low Se concentrations such as milk powder (certified value of Se 0.11 μg/g), or plant leaf samples. (3) Instead of IS correction, the peak height of the spectrum was used for calculations from the matrix matched calibration curve. The results of all materials were close to the certified values, even at 25 ng/g. The detection limit of the MIP-MS with microwave digestion and IS correction was 0.05 ng/mL in standard solutions. The detection limit of the peak height method was 0.1 ng/mL and was estimated to be < 20 ng/g in plant materials. Received: 25 September 1998 / Revised: 15 February 1999 / Accepted: 18 February 1999     

Selenium speciation in tea by dispersive liquid–liquid microextraction coupled to high‐performance liquid chromatography after derivatization with 2,3‐diaminonaphthalene

Selenium is an important element for human health, and it is present in many natural drinks and foods. Present study described a new method using dispersive liquid–liquid microextraction prior to high‐performance liquid chromatography with a UV variable wavelength detector for the determination of the total selenium, Se(IV), Se(VI), and total organoselenium in tea samples. In the procedure, 2,3‐diaminonaphthalene was used as the chelating reagent, 400 μL acetonitrile was used as the disperser solvent and 60 μL chlorobenzene was used as the extraction solvent. The complex of Se(IV) and 2,3‐diaminonaphthalene in the final extracted phase was analyzed by high‐performance liquid chromatography. The factors influencing the derivatization and microextraction were investigated. Under the optimal conditions, the limit of detection was 0.11 μg/L for Se(IV) and the linearity range was in the range of 0.5–40 μg/L. This method was successfully applied to the determination of selenium in four tea samples with spiked recoveries ranging from 91.3 to 100%.     

Determination of selenium in freshwaters by cathodic stripping voltammetry after UV irradiation

An analytical method was developed for the determination of total dissolved selenium in fresh waters, using linear sweep cathodic stripping voltammetry (CSV) in combination with UV photolytic digestion. Both the CSV method, based on the electrodeposition and stripping of Cu(2)Se, and the UV irradiation procedure were investigated in detail. In the presence of dissolved organic substances, as in freshwaters, Se(VI) is reduced to Se(IV) by UV irradiation in 0.1M hydrochloric acid. Glucose can be used as the carbon source in samples low in natural dissolved organic carbon (DOC). The photolytic yields of Se(IV) were about 90% in both cases. Five freshwater samples were analysed for total selenium by CSV after UV photolysis, and by hydride generation atomic absorption spectrometry (HG-AAS) after oxidative digestion followed by reduction with hydrochloric acid. The results agreed well and the concentrations were in the range 70-190 ng/l., well above the detection limit of the CSV method at 2 ng/l.     

Single-step microwave digestion of food and biological samples for the quantitative conversion of Se into the +4 oxidation state

An improved single step microwave digestion procedure is described for providing the fast and easy exhaustive mineralisation of biological samples concomitantly with the quantitative conversion of any type of selenium compounds into Se(IV). In such a way, digested samples are directly suitable for the subsequent Se analysis at trace and ultratrace levels by both spectrometric methods such as HG-ICP-MS or HG-ICP-OES and differential pulse cathodic stripping voltammetry (DPCSV). It is based on the use, under suitably optimised microwave irradiation conditions, of a digestion mixture with a carefully tailored composition such that its redox potential is made lower than that allowing Se(IV) to be oxidized to Se(VI), but high enough to permit total destruction of biological or, in general, organic matrices. It consists of a nitric acid (65%, w/w) and hydrogen peroxide (30%, w/w) mixture in a volume ratio 5:1, frequently adopted for the mineralisation of organic and biological samples, but added simply with 0.25 g mL⁻¹ of NaCl. Successful application of the procedure, in terms of both repeatability and accuracy, to the quantification of selenium by the instrumental methods above in standard compounds and in a certified biological sample proved its good performance. The application to the Se determination in human blood plasma and in a wide variety of foods is also reported.     

Comparison of four microwave digestion methods for the determination of selenium in fish tissue by using hydride generation atomic absorption spectrometry

Four microwave digestion methods of fish tissue for selenium determination by hydride generation atomic absorption spectrometry were compared, in which potassium hexacyanoferrate(III) was chosen as a masking agent for eliminating matrix interferences. The results showed that the methods employing HNO(3)/H(2)O(2), HNO(3)/K(2)S(2)O(8)/H(2)O(2) and HNO(3)/H(3)PO(4)/H(2)O(2) digestion media were unreliable. However, the decomposition using the digestion media of HNO(3)/H(2)SO(4)/H(2)O(2) enabled adequate digestion of fish tissue and retention of selenium in a state amenable for determination. Therefore, the digestion procedures with HNO(3)/H(2)SO(4)/H(2)O(2) media are proposed for the determination of selenium in fish tissue by hydride generation atomic absorption spectrometry. The recoveries of the spiked samples investigated ranged from 90 to 102%. The result obtained from analyzing the NIES CRM No. 6 mussel was in good agreement with the reference value (reference value: 1.5 mug/g; found: 1.45 +/- 0.05 mug/g). The limit of detection for selenium was 0.03 mug/g dry mass for a 100 mg sample. The contents of selenium in local fish species investigated ranged from 0.49 to 2.90 mug/g, and the relative standard deviation for the determination of selenium was less than 8%.     

Sequential photocatalyst-assisted digestion and vapor generation device coupled with anion exchange chromatography and inductively coupled plasma mass spectrometry for speciation analysis of selenium species in biological samples

We have developed an on-line sequential photocatalyst-assisted digestion and vaporization device (SPADVD), which operates through the nano-TiO₂-catalyzed photo-oxidation and reduction of selenium (Se) species, for coupling between anion exchange chromatography (LC) and inductively coupled plasma mass spectrometry (ICP-MS) systems to provide a simple and sensitive hyphenated method for the speciation analysis of Se species without the need for conventional chemical digestion and vaporization techniques. Because our proposed on-line SPADVD allows both organic and inorganic Se species in the column effluent to be converted on-line into volatile Se products, which are then measured directly through ICP-MS, the complexity of the procedure and the probability of contamination arising from the use of additional chemicals are both low. Under the optimized conditions for SPADVD – using 1 g of nano-TiO₂ per liter, at pH 3, and illuminating for 80 s – we found that Se(IV), Se(VI), and selenomethionine (SeMet) were all converted quantitatively into volatile Se products. In addition, because the digestion and vaporization efficiencies of all the tested selenicals were improved when using our proposed on-line LC/SPADVD/ICP-MS system, the detection limits for Se(IV), Se(VI), and SeMet were all in the nanogram-per-liter range (based on 3σ). A series of validation experiments – analysis of neat and spiked extracted samples – indicated that our proposed methods could be applied satisfactorily to the speciation analysis of organic and inorganic Se species in the extracts of Se-enriched supplements.     

Determination of trace selenium in biological material by preconcentration and x-ray emission spectrometry

Selenium is determined in the ng g^?1 to μg g^?1 range in biological and environmental samples. A wet digestion procedure was optimized with respect to volatility losses and recovery yields, by using ⁷⁵Se metabolically incorporated into rat organs. Selenium is preconcentrated from the digestion liquid by a two-step reduction with 4 M HCl and ascorbic acid. The colloidal selenium formed is adsorbed on activated carbon and filtered on a Nucleopore membrane for measurement by energy-dispersive x-ray fluorescence. Almost complete recovery was obtained, and the detection limit was 20 ng, corresponding to 10 ng g^?1 for a 2-g sample. Biological reference materials were analyzed with satisfactory results, and the accuracy of the method was good.     

Preconcentration and separation of inorganic selenium on Dowex 1X8 prior to hydride generation-atomic absorption spectrometry

Exchange reactions between inorganic selenium species and chloride were studied on Dowex 1X8. The concentration exchange constants were determined with the batch technique at room temperature and used to predict the chromatographic enrichment and separation of tetra- and hexavalent selenium. A procedure for the determination of total selenium after digestion with permanganate and anion exchange preconcentration was also developed. The enrichment techniques were applied to the determination of Se(IV) and total dissolved selenium in drinking water and fresh water using flow injection hydride generation-atomic absorption spectrometry (HG-AAS). Results agreed with those obtained in a HG-AAS system where selenium was preconcentrated as hydrogen selenide in a trap at liquid nitrogen temperature.     

Selenium speciation by coupling vesicle mediated HPLC with off-line ETAAS and on-line focused microwave digestion HG-AAS detection

A novel High Performance Liquid Chromatography (HPLC) method for the separation of selenium species with specific detection by off-line Electrothermal Atomization Atomic Absorption Spectrometry (ETAAS) or on-line focused microwave digestion (MW) Hydride Generation Atomic Absorption Spectrometry (HG-AAS) is described. Vesicular mobile phases of the cationic surfactant didodecyldimethylammonium bromide (DDAB) have been evaluated for the liquid chromatographic separation of inorganic selenium (selenite and selenate) and different selenoaminoacids (selenocystine, selenomethionine and selenoethionine) on a C₁₈ reversed-phase column modified by DDAB molecules. The effects of different parameters (pH, buffer and vesicle concentrations) of the mobile phase on the retention times have been determined. The detection limit for selenium with the proposed off-line HPLC-ETAAS method has been found to be 5 g/L of Se. The detection limit using HPLC-on line focused microwave digestion-HG-AAS has been found to be 1 g/L of Se, with a precision (repeatability) better than ± 5%. The latter proved to be an exceptional on-line real-time chromatographic detector for selenium speciation purposes.     

Evaluation of selenium behavior in thermospray flame furnace atomic absorption spectrometry

The behavior of selenium in thermospray flame furnace atomic absorption spectrometry (TS-FF-AAS) was studied and the developed procedure was applied for selenium determination in biological materials after microwave-assisted sample digestion. A sample volume of 600 μL was introduced into the hot metallic Ni tube at a flow rate of 0.4 mL min⁻¹ using water as carrier. The limit of detection obtained for Se was 8.7 μg L⁻¹ (3s_blank/slope, n = 10), which is 95-fold better than that typically obtained using FAAS. The applicability of the TS-FF-AAS procedure was evaluated for selenium determination in biological materials. Certified reference materials of pig kidney (BCR 186) and mussel (GBW 08571) were analyzed and a t-test had not shown any statistically significant difference at a 95% confidence level between determined and certified values for both materials. The procedure was successfully applied for determination of Se in pig kidney and shellfish. It was demonstrated that TS-FF-AAS improved the performance of FAAS (flame atomic absorption spectrometry) for determination of Se.     

Determination of Se using a solid-phase micro-extraction device coupled to a graphite furnace and detection by gas chromatography-mass spectrometry

A solid-phase micro-extraction (SPME) method using an SPME fiber device and graphite furnace (GF) for extracting Se compounds was proposed. Various factors affecting the derivatization and extraction of Se(IV) by SPME-GF were evaluated, including the effect of acid (type and concentration), the concentration of the derivatizing agent, the derivatization temperature, the extraction and derivatization times and the extraction temperature. After optimizing these conditions, the quantification of Se(IV) was performed by Gas Chromatography-Mass Spectrometry (GC-MS). The limit of detection was 0.37 μg L(-1) for Se(IV). The method was successfully applied to the total Se determination in certified reference materials (BCR-414 and SRM 1643e). A recovery of 97% was obtained for water (SRM 1643e). After microwave oven decomposition and the reduction of selenium using a mixture of 2 mol L(-1) HCl and 1% (w/v) KBr, a recovery of 101% and a relative standard deviation of 3.5% were attained for plankton (BCR-414). The SPME-GF method combined with GC-MS was also applied to the determination of the total selenium in a drug sample (selenium chelate).     

Study of the bioavailability of selenium in cows’ milk after a supplementation of cow feed with different forms of selenium

The purpose of the work described in this paper was to develop an easy and quick in-vitro method for comparing the bioavailability of selenium in cows’ milk after different cow feed. The study focuses on bioavailability differences resulting from the use of different selenium species (organic selenium as selenised yeast and sodium selenite) for supplementation of forage. A procedure for determination of selenium in cows’ milk and dialysates, by hydride-generation atomic-fluorescence spectrometry (HG-AFS) after microwave-assisted acid digestion, was optimised. The results show it is possible to obtain cows’ milk enriched with selenium at different concentration without altering the original composition of the milk. The bioavailability was statistically greater for cows’ milk obtained after supplementation of forage with organic selenium at levels of 0.4 and 0.5 μg Se g⁻¹ than for that obtained after supplementation with inorganic and organic selenium at levels of 0.2 and 0.3 μg Se g⁻¹.     

Improving selenium extraction by sequential enzymatic processes for Se-speciation of selenium-enriched Agaricus bisporus

Sample preparation methods based on the use of proteolytic and cell wall digesting enzymes for the speciation analysis of selenized mushroom were investigated. The sample (Agaricus bisporus; 160 microg total Se per g sample) was grown on compost supplemented with selenized yeast. Experiments were carried out to elucidate the possible role of the cell wall digesting enzymes--Lysing enzyme and Driselase--in the improvement of extraction efficiency with and without inhibiting proteolysis during cell wall digestion. A 3-step procedure applying Lysing enzyme and pronase gave the highest extraction efficiency (89%); however, the best species recovery was achieved by a one-step proteolytic procedure. All the procedures of selenium speciation were controlled by independent ICP-AES analysis measuring the total amount of selenium.