Ligand displacement and oxidation reactions of methyl(oxo)rhenium(V) complexes

Compounds that contain the anion [MeReO(edt)(SPh)](-) (3-) were synthesized with the countercations 2-picolinium (PicH+3-) and 2,6-lutidinium (LutH+3-), where edt is 1,2-ethanedithiolate. Both PicH+3- and MeReO(edt)(tetramethylthiourea) (4) were crystallographically characterized. The rhenium atom in each of these compounds exists in a five-coordinate distorted square pyramid. In the solid state, PicH+3- contains an anion with a short (d(SH) = 232 pm) and nearly linear hydrogen-bonded (N-H.S) interaction to the cation. Ligand substitution reactions were studied in chloroform. Displacement of PhSH by PPh(3) follows second-order kinetics, d[MeReO(edt)(PPh(3))]/dt = k[PicH+3-][PPh3], whereas with pyridines an unusual form was found, d[MeReO(edt)(Py)]/dt = k[PyH+3-][Py](2), in which the conversion of PicH+3- to PyH+3- has been incorporated. Further, added Py accelerates the formation of [MeReO(edt)(PPh3)], v = k.[PicH+3-].[PPh3].[Py]. Compound 4, on the other hand, reacts with both PPh(3) and pyridines, L, at a rate given by d[MeReO(edt)(L)]/dt = k.[4].[L]. When PicH+3- reacts with pyridine N-oxides, a three-stage reaction was observed, consistent with ligand replacement of SPh(-) by PyO, N-O bond cleavage of the PyO assisted by another PyO, and eventual decomposition of MeRe(O)(edt)(OPy) to MeReO(3). Each of first two steps showed a large substituent effect; Hammett analysis gave rho(1) = -5.3 and rho(2) = -4.3.     

Probing the catalytic potential of chloro nitrosyl rhenium(I) complexes

The reduction of the mononitrosyl Re(II) salt [NMe(4)](2)[ReCl(5)(NO)] (1) with zinc in acetonitrile afforded the Re(i) dichloride complex [ReCl(2)(NO)(CH(3)CN)(3)] (2). Subsequent ligand substitution reactions with PCy(3), PiPr(3) and P(p-tolyl)(3) afforded the bisphosphine Re(i) complexes [ReCl(2)(NO)(PR(3))(2)(CH(3)CN)] (3, R = Cy a, iPr b, p-tolyl c) in good yields. The acetonitrile ligand in 3 is labile, permitting its replacement with H(2) (1 bar) to afford the dihydrogen Re(I) complexes [ReCl(2)(NO)(PR(3))(2)(η(2)-H(2))] (4, R = Cy a, iPr b). The catalytic activity of 2, 3 and 4 in hydrogen-related catalyses including dehydrocoupling of Me(2)NH·BH(3), dehydrogenative silylation of styrenes, and hydrosilylation of ketones and aryl aldehydes were investigated, with the main focus on phosphine and halide effects. In the dehydrocoupling of Me(2)NH·BH(3), the phosphine-free complex 2 exhibits the same activity as the bisphosphine-substituted systems. In the dehydrogenative silylation of styrenes, 3a and 4a bearing PCy(3) ligands exhibit high catalytic activities. Monochloro Re(I) hydrides [Re(Cl)(H)(NO)(PR(3))(2)(CH(3)CN)] (5, R = Cy a, iPr b) were proven to be formed in the initiation pathway. The phosphine-free complex 2 showed in dehydrogenative silylations even higher activity than the bisphosphine derivatives, which further emphasizes the importance of a facile phosphine dissociation in the catalytic process. In the hydrosilylation of ketones and aryl aldehydes, at least one rhenium-bound phosphine is required to ensure high catalytic activity.     

Cyclobutadieneiron nitrosyl complexes

The air stable yellow-orange complexes of cyclobutadieneiron dicarbonyl nitrosyl hexafluorophosphate, [R₄C₄Fe(CO)₂NO]⁺PF^-₆; R = H, CH₃, Ph, were prepared by the reaction of R₄C₄Fe(CO)₃ and nitrosonium hexafluorophosphate. These complexes undergo facile monocarbonyl substitution reactions with various Lewis bases (L) to afford products of the type [R₄C₄Fe(CO)(NO)L]⁺PF^-₆, R = H, L = Ph₃P, Ph₃As, Ph₃Sb or R = Ph; L = Ph₃P, Ph₃As; a dicarbonyl substitution product of the type [R₄C₄Fe(NO)L₂]⁺PF^-₆, R = Ph; L = (PhO)₃P, was also isolated and characterized.     

N-heterocyclic carbene complexes of Rh: reaction with dioxygen without oxidation

The reaction of oxygen with rhodium complexes containing N-heterocyclic carbenes was found to give dioxygen complexes with rare square planar geometries and unusually short O-O bond lengths. Analysis of the bonding in these complexes by Rh L-edge X-ray absorption spectroscopy (XAS), Raman spectroscopy, and DFT calculations provides evidence for a bonding model in which singlet oxygen is bound to a Rh(I) d8 metal complex, rather than the more common Rh(III) d6 peroxo species with octahedral geometry and O-O bond lengths in the 1.4-1.5 A range.     

Electrocatalytic and photocatalytic water oxidation to dioxygen based on metal complexes

The construction of an artificial photosynthetic device requires detailed understanding of the catalytic aspects of photo- or photoelectro-driven water oxidation. This has been attracting much interest as one of the promising clean energy-providing systems for the future. This review mainly covers progress on electrocatalytic and photocatalytic systems for water oxidation in the last decade. It includes conventional iridium oxide colloid catalysts and the new electrodeposited cobalt-phosphate catalyst films for water oxidation.     

Catalytic selective oxidation of benzyl alcohols to aldehydes with rhenium complexes

The system (ⁿBu₄N)ReO₄ 5/PhIO/CH₂Cl₂, T = 298 K catalyses effectively and with total selectivity the anaerobic oxidation of a range of primary substituted benzyl alcohols (o-, m-, p-X-C₆H₄-CH₂OH, X = H, Me, MeO, Cl, NO₂, CF₃) to the corresponding aldehydes; in contrast, it is unreactive towards secondary benzyl and aliphatic (primary and secondary) alcohols. This may prove of interest in synthetic organic transformations, when several alcoholic functionalities are present in the same molecule.     

Direct tyrosine oxidation using the MLCT excited states of rhenium polypyridyl complexes

Rhenium(I) polypyridyl complexes have been designed for the intramolecular photogeneration of tyrosyl radical. Tyrosine (Y) and phenylalanine (F) have each been separately appended to a conventional Re(I)(bpy)(CO)(3)CN framework via an amide linkage to the bipyridine (bpy) ligand. Comparative time-resolved emission quenching and transient absorption spectra of Re(bpy-Y)(CO)(3)CN and Re(bpy-F)(CO)(3)CN show that Y is oxidized only upon its deprotonation at pH 12. In an effort to redirect electron transport so that it is more compatible with intramolecular Y oxidation, polypyridyl Re(I) complexes have been prepared with the amide bond functionality located on a pendant phosphine ligand. A [Re(phen)(PP-Bn)(CO)(2)](PF(6)) (PP = bis(diphenylphosphino)ethylene) complex has been synthesized and crystallographically characterized. Electrochemistry and phosphorescence measurements of this complex indicate a modest excited-state potential for tyrosine oxidation, similar to that for the (bpy)Re(I)(CO)(3)CN framework. The excited-state oxidation potential can be increased by introducing a monodentate phosphine to the Re(I)(NN)(CO)(3)(+) framework (NN = polypyridyl). In this case, Y is oxidized at all pHs when appended to the triphenylphosphine (P) of [Re(phen)(P-Y)(CO(3))](PF(6)). Analysis of the pH dependence of the rate constant for tyrosyl radical generation is consistent with a proton-coupled electron transfer (PCET) quenching mechanism.     

Isocyanide complexes of molybdenum nitrosyl

Reaction of π-cyclopentadienylmolybdenum nitrosyl halide with CNR (R = alkyl) gives [(π-C₅H₅)Mo(NO)X₂(CNR)] (X = Br or I), [Mo(NO)(CNR)₅]X (X = I or PF₆) and [Mo(NO)(CNR)₄I]; treatment of [Mo(NO)(CNR)₅]I with R′NH₂ gives [Mo(NO)(CNR)₄ {C(NHR)(NHR′)}]I or [Mo(NO)(CNR)₄(NH₂R′)]I (R′ = alkyl) depending on temperature.     

Triphenylphosphineoxide nitrosyl complexes of molybdenum

Summary The tetramethylthiourea (TMTU) complexes of cobalt(II) and nickel(II) halides have been studied in the solid state by electronic, i.r. and far i.r. spectroscopy and magnetochemically. The tetrahedral Co(TMTU)₂X₂ (X = Cl, Br, 1) and Ni(TMTU)₂X₂ (X = Cl, Br) complexes have normal magnetic moments, electronic spectra and crystal field parameters; Ni₂ (TMTU)₃I₄ is diamagnetic. The cobalt complexes have normal (CoX) and (CoX) vibrational frequencies. Ni(TMTU)₂Cl₂ and Ni₂(TMTU)₃I₄ have (NiX) frequencies corresponding to long or bridging Ni-X bonds, while Ni(TMTU)₂Br₂ has normal (NiBr) frequencies for terminal Ni-Br bonds. The (MS) frequencies are similar to those of cobalt(II) and nickel(II) complexes of other thioureas.     

Chloronitrosyl complexes of rhenium

Preparation and properties of several highly stable nitroso complexes of rhenium viz. ReCl₃(NO), Re(OH)₃(NO)₃ M₂ReCl₅(NO) where M is Cs, K and NH₄ are described. These are analogous to the corresponding ruthenium complexes. The oxidation number of the ‘ReNO’ unit as a whole, is +3 but that of the rhenium atom cannot be determined. The nitric oxide stretching band lies within the range of 1710–1920 cm^?1. The cesium and potassium salts are weakly paramagnetic at room temperature.     

Fluoronitroso complexes of rhenium

The first stable series of fluoronitroso complexes have been prepared with rhenium. These include M₂[Re(NO)F₅] (M = K, Cs), Re(NO)LF₃ (L = dipy, phen), Re(H₂O)₂(NO) (OH)F₂, Re(H₂O)₂(NO) (OH)₂F and a cationic species [Re(dipy)₂(NO)F]PtCl₆. These are characterized by their analytical, magnetic, conductance and i.r. spectral data.     

Selected oxidation with dioxygen complexes as intermediates I. Oxidation of coordinated dipeptide ligands

A study of the reaction mechanism, including determination of the fate of the oxygen and of the coordinated ligands, has been undertaken for dioxygen complexes formed cobalt(II) complexes of several dipeptides. An earlier study has shown that binuclear cobalt dioxygen complexes of dipeptides decompose spontaneously to yield inert cobalt(III) complexes and water, not hydrogen peroxide. Complete reduction of the original bridging dioxygen groups strongly suggests that the coordinated ligand is being oxidized to supply the required electrons. Therefore, the dioxygen complexes formed from glycylglycine (gly-gly), alanylglycine (ala-gly) and glycylalanine (gly-ala) were allowed to react and the reaction stoichiometry was determined by gas chromatographic and mass spectrometric analysis for the reaction products. The results demonstrate that the reaction involves two-electron oxidation of the coordinated dipeptides, and that the ligands are oxidized exclusively at the N-terminal position so as to convert the coordinated amino groups to coordinated imines. Additional spectral and polarographic data on the oxidized coordinated ligands were employed to follow kinetics of their formation and subsequent displacement by additional ligand, and to prove that the oxidation reaction occurs only when the peptide is coordinated to cobalt(III) in the dioxygen complex.     

Ligand oxidation as a method for intramolecular activation of metal complexes

The results of investigations of organometallic and coordination compounds whose ligands contain redox fragments based on 2,6-di-tert-butylphenol and linked to the metal by various coordinating groups are summarized. The redox properties of -aryl, - and -allyl complexes, -diketonates, hydrazides, hydroxamates, glyoximates, and metalloporphyrins and metallophthalocyanines are considered. The possibility of changing the reactivity of organometallic and coordination compounds by changing the magnetic state due to oxidation of the redox-active phenolic group in the ligand is demonstrated. It is proposed to use ligand oxidation as a method for intramolecular activation of metal complexes.     

Tellurium-containing rhenium cluster complexes

Synthetic procedures as well as the structures and some properties of tetrahedral and octahedral tellurium-containing rhenium cluster complexes are reported. Crystal chemistry of various types of structure is discussed.     

Structural and mechanistic investigations of the oxidation of dimethylplatinum(II) complexes by dioxygen

The oxidation of (tmeda)Pt(II)(CH(3))(2) (1, tmeda = N,N,N',N'-tetramethylethylenediamine) to (tmeda)Pt(IV)(OH)(OCH(3))(CH(3))(2) (3) by dioxygen in methanol proceeds via a two-step mechanism. The initial reaction between (tmeda)Pt(CH(3))(2) and dioxygen yields a hydroperoxoplatinum(IV) intermediate, (tmeda)Pt(OOH)(OCH(3))(CH(3))(2) (2), which reacts with a second equivalent of (tmeda)Pt(CH(3))(2) to afford the final product 3. Both 2 and 3 have been fully characterized, including X-ray crystallographic structure determinations. The effect of ligand variation on the oxidation of several dimethylplatinum(II) complexes by 2 as well as by dioxygen has been examined.     

Cyclometalated ruthenium chloro and nitrosyl complexes

The novel cyclometalated Ru(III) complex, [Ru(eta(2)-phpy)(trpy)Cl][PF(6)].toluene 1, and the [Ru-NO](6) complex, [Ru(eta(2)-phpy)(trpy)NO][PF(6)](2) 2, where trpy is 2,2': 6',2'-terpyridine and phpy is 2-phenylpyridine, have been prepared and characterized by elemental analysis, IR, (1)H NMR, and electronic absorption spectroscopies, cyclic voltammetry, and crystallography. The crystal structure of 1 showed the chloride ion trans to the sigma-bonding phenyl group of phpy and is an unusual example of a stable paramagnetic cyclometalated complex. The crystal structure of 2 shows the nitrosyl ligand trans to the sigma-bonding phenyl group of phpy. The significant distortion of the normally linear Ru-NO bond angle (167.1(4) degrees) can be largely ascribed to the strong sigma-donor properties of the phenyl group.     

Polynuclear isocyanide complexes of rhenium

The arylation of carbonylgold chloride with diarylzinc compounds yields either triarylgoldzinc or diarylgoldzinc chlorides, depending on the reactant ratio and the nature of the aryl group. The same reactions with diphenylcadmium and diphenylmercury yield exclusively diphenylgoldcadmium chloride and diphenylgoldmercury chloride, respectively. The reactions of the products with N,N,N′,N′-tetramethylethylenediamine and triphenylphosphine were studied.Phenylgold has been obtained as a very unstable solid from diphenylgoldzinc chloride and diphenylgoldmercury chloride.