Recognition of lectin with a high signal to noise ratio: carbohydrate-tri(ethylene glycol)-alkanethiol co-adsorbed monolayer

Densely packed co-adsorbed ultrathin mono molecular layers of short tri(ethylene glycol)-alkanethiolate (for repelling proteins) and maltoside terminated alkanethiolate (for capturing lectin) provided an extremely high signal to noise ratio surface: the repelling molecules, which had two different functions (highly flexible-hydrophilic arm and rigid packing tail group), worked as "nano barriers" in the recognition monolayer.     

Preparation and characterization of polystyrene/Ag core-shell microspheres--a bio-inspired poly(dopamine) approach

In this work, we have systematically investigated the formation and characterization of Self-assembled Monolayer (SAM) films of several silanes on indium tin oxide (ITO) surfaces. Silane molecules having different domains namely substrate binding domain (siloxanes), electron transport region (aliphatic and aromatic spacer) and terminal functional groups (-SH, -CH(3) groups) are employed for the study in order to tune the electron transfer (ET) behaviour across SAM modified electrode-electrolyte interface. Structural characterization of these monolayer films is carried out using X-ray photoelectron spectroscopy (XPS) studies. Wettability (hydrophilic and hydrophobic nature) of such modified electrodes is evaluated using contact angle measurements. ET behaviour of these modified electrodes is investigated by electrochemical techniques namely cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) using K(4)Fe(II)(CN)(6)|K(3)Fe(III)(CN)(6) redox couple as a probe. Disappearance of redox peaks in the CV measurements and formation of semicircle having a higher charge transfer resistance (R(ct)) values during EIS studies suggest that the resultant monolayer films are compact, highly ordered with very low defects and posses good blocking property with less pinholes. The heterogeneous ET rate constant (k) values are determined from EIS by fitting them to an appropriate equivalent circuit model. Based on our results, we comment on tuning the ET behaviour across the interface by a proper choice of spacer region.     

Molecular recognition of avidin on biotin-functionalized gold surfaces detected by FT-IRRAS and use of metal carbonyl probes

Fourier transform infrared reflection-absorption spectroscopy (FT-IRRAS) was successively used to monitor the covalent immobilization of biotin molecules onto a planar gold substrate covered with a self-assembled monolayer of cystamine and to transduce the molecular recognition of avidin and biotin. This detection was greatly facilitated and made selective by the labeling of avidin and of biotin with various transition metal carbonyl probes. The binding of avidin to the surface was optimized by blocking the nonspecific binding sites by adsorption of an unrelated protein, bovine serum albumin. This work exemplifies the feasibility of detecting biomolecular associations involving molecules of any size at a liquid/solid interface by using a simple and accessible surface analysis technique.     

12-Mercaptododecyl β-maltoside-modified gold nanoparticles: specific ligands for concanavalin A having long flexible hydrocarbon chains

A simple and highly specific protein detection system using glycoconjugated gold nanoparticles was investigated. This system was based on the aggregation of gold nanoparticles coated with carbohydrate alkanethiols in the presence of corresponding proteins (lectins) that had specific recognition for certain carbohydrates. In order to construct an efficient specific recognition system, maltoside alkanethiol was adopted as an effective sensing modifier having a disaccharide group and a flexible long alkyl chain. The surface modification of gold nanoparticles with maltoside alkanethiol resulted in a shift and broadening (from 520 to 610 nm) of the absorption peak. Monodispersed maltoside-adsorbed gold nanoparticles aggregated with the specific lectin, concanavalin A (Con A). This phenomenon was used to detect the presence of Con A and to estimate concentrations of Con A in sample solutions. The precipitate of the maltoside–gold nanoparticle–Con A mixture was redispersed by addition of methyl α-D-mannopyranoside whose adsorption coefficient is larger than that of maltoside with Con A.     

Parent-molecule rotational depolarization of photofragment angular momentum distributions: diatomic and polyatomic molecules

We extend the A(q)(k) polarization-parameter model, which describes product angular momentum polarization from one photon photodissociation of polyatomic molecules in the molecular frame [J. Chem. Phys., 2010, 132, 224310], to the case of rotating parent molecules. The depolarization of the A(q)(k) is described by a set of rotational depolarization factors that depend on the angle of rotation of the molecular axis γ. We evaluate these rotational depolarization factors for the case of dissociating diatomic molecules and demonstrate that they are in complete agreement with the results of Kuznetsov and Vasyutinskii [J. Chem. Phys., 2005, 123, 034307] obtained from a fully quantum mechanical approach of the same problem, showing the effective equivalence of the two approaches. We further evaluate the set of rotational depolarization factors for the case of dissociating polyatomic molecules that have three (near) equal moments of inertia, thus extending these calculations to polyatomic systems. This ideal case yields insights for the dissociation of polyatomic molecules of various symmetries when we compare the long lifetime limit with the results obtained for the diatomic case. In particular, in the long lifetime limit the depolarization factors of the A(0)(k) (odd k), Re(A(1)(k)) (even k) and Im(A(1)(k)) (odd k) for diatomic molecules vanish; in contrast, for polyatomic molecules the depolarization factors for the A(0)(k) (odd k) reduce to a value of 1/3, whereas for the Re(A(1)(k)) (even k) and Im(A(1)(k)) (odd k) they reduce to 1/5.     

Real-time monitoring of nanomolar binding to a cyclodextrin monolayer immobilized on a Si/SiO2/novolac surface using white light reflectance spectroscopy: the case of triclosan

The monitoring of the antibacterial agent triclosan binding at nanomolar concentration from an aqueous solution by employing a well-packed monolayer with a predetermined single orientation made of specifically synthesized 2,3-dimethyl-6-(undec-10-enamide)-6-deoxy-β-cyclodextrin (DMBUA) on a silicon wafer (Si/SiO(2)) coated with a novolac resin is reported. A white light reflectance spectroscopy (WLRS) setup was used for the real-time monitoring of the DMBUA deposition and triclosan binding processes. Film thicknesses obtained by WLRS were in very good agreement with the ones measured by X-ray reflectivity (XRR) experiments. Triclosan binds strongly to the DMBUA monolayer (logK(assoc)=6.68). NMR studies in aqueous solution indicated that the chlorophenolyl ring rather than the dichlorophenyl ring is preferentially inserted into DMBUA cups. The current detecting system that requires no tedious surface chemistry, no thiolated cyclodextrins, no gold surfaces, and no expensive equipment may be useful in capturing small molecules and may permit various applications, e.g., preparation of antimicrobial surfaces.     

Area per surfactant molecule values of gemini surfactants at the liquid-hydrophobic solid interface

Areas per surfactant molecule at the liquid/hydrophobic solid (A(LS)) and the liquid/air (A(LA)) interface as a function of the spacer length are reported for cationic gemini surfactants having (CH2)n spacer s. A(LA) increases with increasing spacer length up to 6-8 CH2 groups in the spacer and then levels off. A(LS) values indicate a more closely packed arrangement of the surfactant molecules than that at the liquid/air interface. Comparison of A(LA) and A(LS) values indicates that the surfactant molecules at the liquid/hydrophobic solid interface are almost three times as closely packed as those at the liquid/air interface. A comparison of the experimental values of the area per surfactant molecule at both interfaces was made with those calculated from dimensions of the surfactant molecule in vacuo.     

Gemini surfactants at the air/water interface: a fully atomistic molecular dynamics study

Gemini surfactants typically consist of two single-chain surfactants chemically linked by a spacer molecule. We report herein the results of fully atomistic molecular dynamics (MD) simulations of a series of Gemini surfactants: CsH2s-alpha,omega-bis(C12H25N+(CH3)2Cl-), at the air/water interface with s = 3, 4, 6, 12, 14, and 16, at values of the initial surface area per surfactant AS = 70 A2, 77 A2, 95 A2, 151 A2, 133 A2, and 103 A2, respectively. The AS values employed were obtained from surface tension and neutron reflection experiments at the respective cmc of each surfactant. The Gemini surfactant corresponding to s = 3 was also simulated at AS = 105 A2, which is the experimentally derived value of surface area per surfactant at 1/10th of cmc. Only the surfactants with s = 12 and 14 and the surfactant with s = 3 at AS = 105 A2 gave a stable monolayer at the air/water interface. In other cases, we observe movement of some surfactant molecules from the air/water interface into the aqueous phase, resulting in a stable primary monolayer of surfactants at the air/water interface and a small concentration of surfactant molecules below it. The latter form aggregates, with their hydrophobic chains in the core. The density profiles along the normal to the interface are compared with the ones obtained from neutron reflection experiments. The MD simulations confirm the bending of the spacer toward the hydrophobic chains as the spacer length is increased and the spacer becomes more hydrophobic. The simulations have helped to shed light on the low-resolution picture which emerges from experimental analyses.     

Dependences of Water Permeation through Cyclic Octa-peptide Nanotubes on Channel Length and Membrane Thickness

Effects of the channel length and membrane thickness on the water permeation through the transmembrane cyclic octa-peptide nanotubes (octa-PNTs) have been studied by molecular dynamics (MD) simulations. The water osmotic permeability (p(f)) through the PNTs of k × (WL)(4)/POPE (1-palmitoyl-2-oleoyl-glycerophosphoethanolamine; k = 6, 7, 8, 9, and 10) was found to decay with the channel length (L) along the axis (～L(-2.0)). Energetic analysis showed that a series of water binding sites exist in these transmembrane PNTs, with the barriers of ～3k(B)T, which elucidates the tendency of p(f) well. Water diffusion permeability (p(d)) exhibits a relationship of ～L(-1.8), which results from the novel 1-2-1-2 structure of water chain in such confined nanolumens. In the range of simulation accuracy, the ratio (p(f)/p(d)) of the water osmotic and diffusion permeability is approximately a constant. MD simulations of water permeation through the transmembrane PNTs of 8 × (WL)(4)/octane with the different octane membrane thickness revealed that the water osmotic and diffusion permeability (p(f) and p(d)) are both independent of the octane membrane thickness, confirmed by the weak and nearly same interactions between the channel water and octane membranes with the different thickness. The results may be helpful for revealing the permeation mechanisms of biological water channels and designing artificial nanochannels.     

Synthesis and Langmuir studies of bivalent and monovalent alpha-D-mannopyranosides with lectin Con A

Highly avid interaction between carbohydrate ligands and lectin receptors nominally requires the ligand presentation in a clustered form. We present herein an approach involving Langmuir monolayer formation of the sugar ligands and the assessment of their lectin binding at the air-water interface. Bivalent alpha-D-mannopyranoside containing the glycolipid ligand was used to study its binding profiles with lectin Con A, in comparison to the corresponding monovalent glycolipid. In addition to the bivalent and monovalent nature of the glycolipid ligands at the molecular level, the ligand densities at the monolayer level were varied with the aid of a nonsugar lipid molecule so as to obtain mixed monolayers with various sugar-nonsugar ratios. Lectin binding of bivalent and monovalent ligands at different ratios was monitored by differential changes in the surface area per molecule of the mixed monolayer, with and without the lectin. The present study shows that maximal binding of the lectin to the bivalent ligand occurs at lower sugar densities at the interface ( approximately 10% sugar in the mixed monolayer) than for that of the monovalent ligand ( approximately 20% sugar in the mixed monolayer). It is observed that complete coverage of the monolayer with only the sugar ligands does not allow all of the sugars to be functionally active.     

Conformational changes in human serum albumin induced by sodium perfluorooctanoate in aqueous solutions

Conformational changes in the bulk solution and at the air-aqueous interface of human serum albumin (HSA) induced by changes in concentration of sodium perfluorooctanoate (C(7)F(15)COO(-)Na(+)) were studied by difference spectroscopy, zeta-potential data, and axisymmetric drop shape analysis. zeta-potential was used to monitor the formation of the HSA-C(7)F(15)COO(-)Na(+) complex and the surface charge of the complex. The conformational transition of HSA in the bulk solution was followed as a function of denaturant concentration by absorbance measurements at 280 nm. The data were analyzed to obtain values for the Gibbs energies of the transition in water (DeltaG(0)(W)) and in a hydrophobic environment (DeltaG(0)(hc)) pertaining to saturated protein-surfactant complexes. The conformational changes that surfactants induce in HSA molecules alter its absorption behavior at the air-water interface. Dynamic surface measurements were used to evaluate this behavior. At low [C(7)F(15)COO(-)Na(+)], proteins present three adsorption regimes: induction time, monolayer saturation, and interfacial gelation. When surfactant concentration increases and conformational changes in the bulk solution occur, the adsorption regimes disappear. HSA molecules in an intermediate conformational state migrate to the air-water interface and form a unique monolayer. At high [C(7)F(15)COO(-)Na(+)], the adsorption of denatured molecules exhibits a behavior analogous to that of dilute solutions.     

Molecular organization of a water-insoluble iridium(III) complex in mixed monolayers

In this work, organized mixed monolayers containing a cationic water-insoluble iridium(III) complex, Ir-dye, [Ir(ppy)(2)(tmphen)]PF(6), (tmphen = 3,4,7,8-tetramethyl-1,10-phenanthroline, and ppy = 2-phenylpyridine), and an anionic lipid matrix, DMPA, dimyristoyl-phosphatidic acid, with different molar proportions, were formed by the co-spreading method at the air-water interface. The presence of the dye at the interface, as well as the molecular organization of the mixed films, is deduced from surface techniques such as pi-A isotherms, Brewster angle microscopy (BAM) and reflection spectroscopy. The results obtained remark the formation of an equimolar mixed film, Ir-dye/DMPA = 1:1. BAM images reveal a whole homogeneous monolayer, with gradually increasing reflectivity along the compression process up to reaching the collapse of this equimolecular monolayer at pi approximately equal to 37 mNm(-1). Increasing the molar ratio of DMPA in the mixture, the excess of lipid molecules organizes themselves forming dark flower-like domains of pure DMPA at high surface pressures, coexisting with the mixed Ir-dye/DMPA = 1:1 monolayer. On the other hand, unstable mixed monolayers are obtained by using an initial dye surface concentration higher than the equimolecular one. These mixed Langmuir monolayers have been successfully transferred onto solid substrates by the LB (Langmuir-Blodgett) technique.     

Self-assembly and molecular recognition of adenine- and thymine-functionalized nucleolipids in the mixed monolayers and thymine-functionalized nucleolipids on aqueous melamine at the air-water interface

Self-assembly and molecular recognition of the monolayers composed of an equimolar mixture of adenine- and thymine-functionalized nucleolipids at the air-water interface have been investigated in detail using surface pressure-molecular area isotherms and in situ infrared reflection absorption spectroscopy (IRRAS). Prior to molecular recognition, the adenine moieties in the monolayer were almost oriented on an end-on mode through π-stacking and hydrogen bonding interactions, and the C-C-C planes of the alkyl chains were preferentially oriented perpendicular to the water surface, while the thymine moieties in the monolayer were involved in hydrogen bonding almost with a flat-on orientation. On aqueous subphases containing complementary bases, no significant molecular recognition was observed for the monolayers of individual nucleolipids. In the monolayer of equimolar mixture, molecular recognition occurred between the adenine and thymine moieties through hydrogen bonding probably with the development of cyclic structures of adenine-thymine-adenine-thymine quartets. Although molecular recognition between the monolayer of thymine-functionalized nucleolipids and aqueous melamine took place through triple hydrogen bonds, no melamine binding to the monolayer of equimolar mixture was observed, which reflects the formation of the quartets in the mixed monolayers at the air-water interface. FTIR and small-angle X-ray diffraction (XRD) results of the corresponding Langmuir-Blodgett films support the hydrogen bonding recognition and molecular orientation.     

Self-assembly and heterogeneous electron transfer properties of metallo-octacarboxyphthalocyanine complexes on gold electrode

Electrochemical properties of redox-active self-assembled molecular films of novel metallo-octacarboxyphthalocyanine (MOCPc, M = Fe, Co and Mn) complexes integrated with cysteamine (Cys) monolayer on gold electrodes via amide bonds were investigated. X-Ray photoelectron spectroscopy confirmed the appearance of the various elements in their expected chemical environment upon immobilization of these species. The heterogeneous electron transfer properties of the Au-Cys-MOCPc molecular films using an outer-sphere ([Fe(CN)(6)](4-)/[Fe(CN)(6)](3-)) redox probe were studied using cyclic voltammetry and electrochemical impedance spectroscopy. The electron transfer rate constant (k(app)) depends markedly on the central metal of the metallophthalocyanine cores (k(app): Co > Mn > Fe). A strong pH dependence of the electron transport of the Au-Cys-MOCPc molecular films was found. The surface pK(a) values of the MOCPc complexes were essentially the same (ca. 7.5). The differences in the electron transports and ionization constants are discussed. The electrodes are sensitive to the electrooxidation of epinephrine in physiological pH conditions, peak potential (E(p)/V vs. Ag|AgCl, saturated KCl) decreasing as FeOCPc (0.20 V) < MnOCPc (0.26 V) < CoOCPc (0.34 V).     

One-step immobilization of alkanethiol/glycolipid vesicles onto gold electrode: amperometric detection of Concanavalin A

Functionalized vesicles composed of glycolipid and alkanethiol lipids have been immobilized onto gold surface through one-step self-assembly to construct an electrochemical biosensor for Concanavalin A (Con A) detection. Incorporation of alkanethiol lipid molecules into the vesicles allows for firm attachment of the vesicles onto a gold surface to form a sensing interface. At the same time, the introduction of alkanethiol lipid avoids cumbersome organic syntheses of sulfur-containing compound, making the biosensor greater applied prospect. Through the recognition of Con A by glycolipid which was immobilized on the surface of electrode, a decrease of electrochemical signal was observed. This decrease was restored when the electrode was immersed in a stronger binding solution such as glucose. The repeated usability of the novel sensor is excellent.     

Biophysical investigation of the interfacial properties of cationic fluorocarbon/hydrocarbon hybrid surfactant: mimicking the lung surfactant protein C

The interfacial behavior of the newly designed Fluorocarbon Hydrocarbon Cationic Lipid (FHCL or CH(3)(CH(2))(17)N(+)(C(2)H(5))(2)(CH(2))(3)(CF(2))(7)CF(3)I(-)) and its mixtures with a phospholipid (DPPC, Dipalmitoylphosphatidylcholine) at different mole fractions were investigated. This new molecule was synthesized to mimic the selected properties of lung surfactant, which is a natural lipid-protein mixture which is known to play important roles in the process of respiration, by considering the structure/function relation of lung surfactant protein (SP-C). Each segment in the molecular structure was selected to affect the molecular level interaction at the interface whereas the keeping the overall structure as simple as possible. The surface pressure area isotherms obtained for the mixtures of DPPC/FHCL indicated that there was repulsive interaction between DPPC and FHCL molecules. Due to the molecular level interaction, specifically at mole fraction 0.3, the isotherm obtained from that mixture resembled the isotherm obtained from the DPPC monolayer in the presence of SP-C. High elasticity of the interface was one of the important parameters for the respiration process, therefore, shear and dilatational elasticities of two-component systems were determined and they were found to be similar to the case where SP-C protein is present. Fluorescence microscopy images were taken in order to investigate the monolayer in details. The FHCL was able to fluidize the DPPC monolayer even at high surface pressures effectively. In addition, the cyclic compression-expansion isotherms were obtained to understand the spreading and re-spreading ability of the pure FHCL and the mixed DPPC/FHCL monolayers. At a specific mole fraction, X(FHCL)=0.3, the mixture exhibited good hysteresis in area, compressibility, recruitment index and re-spreading ability at the interface. All these results point out that FHCL can fulfill the selected features of the lung surfactant that are attributed to the presence of SP-C protein when mixed with DPPC, even if the molecular structure of the FHCL is quite simple.     

Patterned monolayer self-assembly programmed by side chain shape: four-component gratings

A molecular recognition strategy based on alkadiyne side chain shape is used to self-assemble a four-component, 1D-patterned monolayer at the solution-HOPG interface. The designed monolayer unit cell contains six molecules and spans 23 nm × 1 nm. The unit cell's internal structure and packing are driven by complementary shapes and lengths of six different alkadiyne side chains. A solution of the four compounds on HOPG self-assembles monolayers (i) comprised, almost entirely, of the intended unit cell, (ii) exhibiting patterned domains spanning 10(4) nm(2), and (iii) which are sufficiently robust that patterned domains survive solvent rinsing and drying. The patterned monolayer affords 1D-feature spacings ranging from 3.3 to 23 nm. The results demonstrate the remarkable selectivity afforded by molecular recognition based on alkadiyne side chain shape and the ability to program highly complex 1D-patterns in self-assembled monolayers.     

Structural and shear characteristics of adsorbed sodium caseinate and monoglyceride mixed monolayers at the air-water interface

The structural and shear characteristics of mixed monolayers formed by an adsorbed Na-caseinate film and a spread monoglyceride (monopalmitin or monoolein) on the previously adsorbed protein film have been analyzed. Measurements of the surface pressure (pi)-area (A) isotherm and surface shear viscosity (eta(s)) were obtained at 20 degrees C and at pH 7 in a modified Wilhelmy-type film balance. The structural and shear characteristics of the mixed films depend on the surface pressure and on the composition of the mixed film. At surface pressures lower than the equilibrium surface pressure of Na-caseinate (at pipi(e)(CS) have important repercussions on the shear characteristics of the mixed films.     

The study of the interaction of a model alpha-helical peptide with lipid bilayers and monolayers

We studied the interaction of the alpha-helical peptide acetyl-Lys(2)-Leu(24)-Lys(2)-amide (L(24)) with tethered bilayer lipid membranes (tBLM) and lipid monolayers formed at an air-water interface. The interaction of L(24) with tBLM resulted in adsorption of the peptide to the surface of the bilayer, characterized by a binding constant K(c)=2.4+/-0.6 microM(-1). The peptide L(24) an induced decrease of the elasticity modulus of the tBLM in a direction perpendicular to the membrane surface, E(radial). The decrease of E(radial) with increasing peptide concentration can be connected with a disordering effect of the peptide to the tBLM structure. The pure peptide formed a stable monolayer at the air/water interface. The pressure-area isotherms were characterized by a transition of the peptide monolayer, which probably corresponds of the partial intercalation of the alpha-helixes at higher surface pressure. Interaction of the peptide molecules with lipid monolayers resulted in an increase of the mean molecular area of phospholipids both in the gel and liquid crystalline states. With increasing peptide concentration, the temperature of the phase transition of the monolayer shifted toward lower temperatures. The analysis showed that the peptide-lipid monolayer is not an ideally miscible system and that the peptide molecules form aggregates in the monolayer.