Competitive adsorption of collagen and bovine serum albumin—effect of the surface wettability

The competitive adsorption of collagen and bovine serum albumin (BSA) on surfaces with varied wettability was investigated with imaging ellipsometry, and ellipsometry. Silane modified silicon surfaces were used as substrates. The results showed that surface wettability had an important effect on protein competitive adsorption. With the decrease of surface wettability, the adsorption of collagen from the mixture solution of collagen and BSA decreased, while the adsorption of BSA increased.     

Improving the hydrophilic and antifouling properties of poly(vinyl chloride) membranes by atom transfer radical polymerization grafting of poly(ionic liquid) brushes

In this study, poly(1‐butyl‐3‐vinylimidazolium bromide) (PBVIm‐Br) was grafted onto the poly(vinyl chloride) (PVC) membrane surface via a 2‐step atom transfer radical polymerization (ATRP) reaction. Poly(2‐hydroxyethylmethacrylate) (PHEMA) was grafted onto the membrane surface by aqueous ATRP reaction; then, BVIm‐Br was introduced onto the surface of the PHEMA‐modified PVC membrane through traditional ATRP reaction. The analysis of surface chemistry confirmed the successful grafting of PHEMA and PBVIm‐Br on PVC membrane surface, and the grafting density (GD) of PBVIm‐Br gradually increased as the grafting time was prolonged. The modified membrane exhibited a positive charge and significantly enhanced surface hydrophilicity. The static water contact angle of the membrane surface decreased from 92.3° to 51.6° as the GD of the PBVIm‐Br brushes increased. Filtration experiments indicated that the water flux of the modified membrane increased with increasing GD, and their recovered fluxes were more than twice than the original. In addition, the total fouling ratio of the membranes decreased from 89% in M0 to 67% in M5, and most of the fouling was reversible as the GD of PBVIm‐Br brushes increased. These results indicated that the positive charged poly(ionic liquid) brushes featuring hydrophilic properties would have potential applications in membrane separation.     

New nitrite ionic liquid (IL-ONO) and nanoparticles of organosilane-based nitrite ionic liquid immobilized on silica as nitrosonium sources for electrophilic aromatic nitrosation

An improved method for the synthesis of nitrosoarenes has been developed using a new nitrite ionic liquid (IL-ONO) and immobilized nitrite ionic liquid. These ionic liquids play as nitrosonium sources for electrophilic aromatic nitrosation of active aromatics at 0-5 °C. Their action was accomplished in water and the satisfactory results were obtained under the mild conditions in short reaction time.     

Preparation and characterization of conductive chitosan–ionic liquid composite membranes

Anhydrous conductive membranes composing of a composite of chitosan (CS) and ionic liquids with symmetrical carboxyl groups were explored. Scanning electron microscope images revealed that porous composite membranes could be obtained by combining CS with different amounts of 1,4‐bis(3‐carboxymethyl‐imidazolium)‐1‐yl butane chloride ([CBIm]Cl). Fourier transform infrared and proton nuclear magnetic resonance confirmed that the formation of ammonium salts after CS was combined with [CBIm]Cl. The thermal property of CS–ionic liquid composite membranes was studied through thermogravimetric analysis. The anhydrous ionic conductivities of CS–[CBIm]X (X = Cl, Ac, BF₄, and I) composite membranes were measured using ac impedance spectroscopy at room temperature in N₂ atmosphere. The conductivities (0.4–0.7 × 10^?4 Scm^?1), found to be in the same range as semiconductors, were significantly higher than those of pure CS membrane (<10^?8 Scm^?1). In addition, the anhydrous conductivity of composite membrane based on CS–[CBIm]I at room temperature reached a level as high as 0.91 × 10^?2 Scm^?1 when iodine was doped. Copyright © 2011 John Wiley & Sons, Ltd.     

Study of the effect of chemical composition on the surface wettability of three-dimensional graphene foams

The chemical composition obviously affects the surface wettability of a three-dimensional(3D) graphene material apart from its surface energy and microstructure.In the hydrothermal preparation,the heteroatom doping changes the chemical composition and wettability of the 3D graphene material.To realize the controllable surface wettability of graphene materials,aminobenzene sulfonic acid(ABSA)was selected as a typical doping agent for the preparation of nitrogen and sulfur co-doped 3D graphene foa...     

Functional Poly(ionic liquid) Porous Membranes: From Fabrications to Advanced Applications†

Polyelectrolyte porous membranes (PPMs) belong to the most interesting classes of materials, because the synergy of tunable pore sizes and charge nature of polyelectrolyte endow them with wide-ranging practical applications. However, owing to the water solubility and ionic nature of the polyelectrolytes, traditional polyelectrolytes are difficult to use in scalable preparation of high-quality PPMs through the well-developed industrial methods. Poly(ionic liquid)s (PIL) are a subclass of functional polyelectrolytes bearing ionic liquid groups in their repeating unites, inheriting the advantages of ionic liquids (ILs) and macromolecular architecture features. In recent years, along with rapid development of PIL materials chemistry, considerable and significant developments involving the novel preparation methods, and structure-property-function relationships of PPMs have been made. In this review, we highlight the latest discovery and proceedings of PPMs, particularly the advancements in how to tailor structures and properties of PPMs by rational structure design of PILs. The formation mechanisms of various PPMs were also discussed in detail from the viewpoint of PILs molecular structures. A future perspective of the challenges and promising potential of PPMs is cast on the basis of these achievements. We expect that these analyses and deductions will be useful for the design of useful PPMs and serve as a source of inspiration for the design of future multifunctional PPMs.      

Combination of ionic liquid dispersive liquid-phase microextraction and high performance liquid chromatography for the determination of triazine herbicides in water samples

A temperature-controlled ionic liquid dispersive liquid-phase microextraction in combination with high performance liquid chromatography was developed for the enrichment and determination of triazine herbicides such as cyanazine,simazine,and atrazine in water samples.1-Octyl-3-methylimidazolium hexafluorophosphate([C8MIM][PF6]) was selected as the extraction solvent.Several experimental parameters were optimized.Under the optimal conditions,the linear range for cyanazine was in the concentration range of 0.5–80 mg/L and the linear range for simazine and atrazine was in the range of1.0–100 mg/L.The limit of detection(LOD,S/N = 3) was in the ranges of 0.05–0.06 mg/L,and the intra day and inter day precision(RSDs,n = 6) was in the ranges of 3.2%–6.6% and 4.8%–8.9%,respectively.Four real water samples were analyzed with the developed method,and the experimental results showed that the spiked recoveries were satisfactory.All these exhibited that the developed method was a valuable tool for monitoring such pollutants.     

Enrichment and sensitive determination of dichlorodiphenyltrichloroethane and its metabolites with temperature controlled ionic liquid dispersive liquid phase microextraction prior to high performance liquid phase chromatography

Dichlorodiphenyltrichloroethane (DDT) and its main metabolites are important environmental pollutants and have been in the focusing center. It is of great value to develop simple, rapid, sensitive and easy to operate method for monitoring them. Present work established a novel temperature controlled ionic liquid dispersive liquid phase microextraction method in combination with high performance liquid chromatography for the enrichment and determination of DDT and its metabolites. Proposed method used only ionic liquid 1-hexyl-3-methylimidazolium hexafluorophosphate ([C₆MIM][PF₆]) for the enrichment and overcame the demerits of conventional single drop liquid phase microextraction and dispersive liquid-liquid microextraction. Temperature has two functions here, one is to promote the dispersing of ionic liquid into the solution and forming infinitesimal micro-drop and increasing the chance of the analytes extracted into ionic liquid phase, and the other one is to perform phase-separation. A series of factors that would affect the extraction performance was systematically investigated and optimized. The experimental results indicated that the detection limits obtained for p,p′-DDD, p,p′-DDT, o,p′-DDT and p,p′-DDE were 0.24, 0.24, 0.45, 0.24 ng mL⁻¹, respectively. The linear ranges for them were from 1.0 to 100 ng mL⁻¹, and the precisions were between 3.8% and 6.7% (n = 6). The proposed method was validated with four real-world samples and excellent results were achieved.     

Synthesis and characterization of anhydrous conducting polyimide/ionic liquid complex membranes via a new route for high‐temperature fuel cells

The paper deals with the synthesis and characterization of a new series of anhydrous conducting acid‐doped complex membranes based on polyimide (PI) and ionic liquid (IL) for high‐temperature fuel cells via a new route. For this purpose, three imidazolium‐based ILs (RIm⁺BF₄^?) with different alkyl chain lengths (R=methyl, ethyl, and butyl) are added into polyamic acid (PAA) intermediate prepared from the reaction of benzophenonetetracarboxylic dianhydride and diaminodiphenylsulfone in different –COOH/imidazolium molar ratios (n = 0.5, 1, and 2). Then, the thermally imidized complex membrane was doped with H₂SO₄. The conductivities of acid‐doped PI/IL complex membranes prepared by taking n of 1 are found to be in the range of 10^?4?10^?5 S cm^?1 at 180°C, whereas the acid‐free PI/IL complex membranes show the conductivity at around 10^?9?10^?10 S cm^?1. Thermogravimetric analysis results reveal that the acid‐doped PI/IL complex membranes are thermally stable up to 250°C. Dynamic mechanical analysis results of the acid‐doped ionically interacted complex membrane show that the mechanical strengths of the PI/IL complex membranes including 1‐methyl imidazolium tetrafluoroborate (MeIm‐BF₄) and 1‐ethyl 3‐methyl imidazolium tetrafluoroborate (EtIm‐BF₄) are comparable with those of pristine PI until 200°C. Furthermore, it can be clearly emphasized that the ionic interaction between carboxylic acid groups of PAA's and IL's cations offers a positive role in long‐term conductivity stability by preventing the IL migration at high temperatures. On the other hand, preliminary methanol permeability tests of the acid‐doped membranes show that they can also be considered as an alternative for direct methanol fuel cells. Copyright © 2011 John Wiley & Sons, Ltd.     

Fast and reversible CO2 quartz crystal microbalance response of vinylimidazolium‐based poly(ionic liquid)s

A series of poly(ionic liquid)s (pILs) based on the 1‐vinyl‐3‐hexylimidazolium polymerizable cation and on the bis(trifluoromethylsulfonyl)imide, nonafluoro‐1‐butanesulfonate, dodecylbenzenesulfonate, heptadecafluorooctanesulfonate, and 4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,11‐heptadecafluoroundecanoate anions have been synthesized and characterized. Their sorption/desorption response towards CO₂ has been tested through quartz crystal microbalance investigations. The obtained results show that all of the pILs here reported are featured by peculiar CO₂ sorption properties as they display fast and linear response, reversibility without any memory effect, and reproducibility, suggesting that anion plays a key role in determining sensitivity. Copyright © 2011 John Wiley & Sons, Ltd.     

The effect of light penetration depth on the LCST phase behavior of a thermo‐ and photoresponsive statistical copolymer in an ionic liquid

A reflection cloud point technique allows for rapid screening of light‐dependent phase separation temperatures of thermo‐ and photoresponsive polymer/ionic liquid solutions as a function of sample thickness, molecular weight, and copolymer composition. We systematically investigate the lower critical solution temperature (LCST) phase behavior of poly(benzyl methacrylate‐stat‐(4‐phenylazophenyl methacrylate)). Under UV light, the photoresponsive azobenzene‐based repeat unit becomes more polar as the cis form dominates, increasing its solubility in the ionic liquids 1‐ethyl‐3‐methyl imidazolium and 1‐butyl‐3‐methyl imidazolium bis(trifluoromethanesulfonyl)imide. This light‐dependent polarity change leads to two phase separation temperatures, depending on the illumination wavelength. Under visible light, which drives the azobenzene moiety into the trans ground state, the LCST shows no sample thickness dependence. Under UV light, however, sample thickness plays a significant role. Samples of around 1 mm thickness show no apparent difference under UV and visible light, whereas thinner samples show an increasing difference between the phase separation temperatures with decreasing sample thickness. Neither phase separation temperature exhibits a significant dependence on molecular weight. Increasing the photoresponsive monomer content did not lead to an increase in the difference between the phase separation temperatures at fixed thickness, due to a concomitant increase in UV light absorbed at the sample surface. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 281–287     

Fabrication of Superoxide Dismutase (SOD) Imprinted Poly(ionic liquid)s via eATRP and its Application in Electrochemical Sensor

Superoxide dismutase (SOD) plays an important role in nearly all living cells. In this study, SOD imprinted poly(ionic liquid)s (SIPILs) were prepared on the surface of the bare Au electrode modified with nano‐palladium and nano‐gold (Au/nPd/nAu/SIPILs). SIPILs was synthesized with 1‐vinyl‐3‐propyl imidazole sulfonate ionic liquids as functional monomers via electrochemically mediated atom transfer radical polymerization (eATRP) catalyzed by SOD. The Au/nPd/nAu/SIPILs was examined by cyclic voltammetry (CV), scanning electron microscope (SEM), energy‐dispersive spectrometer (EDS) and X‐ray photoelectron spectroscopy (XPS). The Au/nPd/nAu/SIPILs was also used as an electrochemical sensor to determine SOD by differential pulse voltammetry (DPV). Under the optimal conditions, the detection range of SOD was from 1.0×10^?8 to 1.0×10² mg L^?1 with a limit of detection of 8.90×10^?9 mg L^?1 (S/N=3). Compared with other methods, the sensor based on SIPILs had the broader linear range and lower detection limit.     

Ion transport and relaxation in phosphonium poly(ionic liquid) homo- and co-polymers

In the present work, a poly(ionic liquid) (PIL), poly(triphenyl-4-vinylbenzylphosphonium chloride) and a series of its random copolymers with nonionic hydrophobic poly(methyl methacrylate) (PMMA) are synthesized by conventional free radical polymerization (CFRP) and reversible addition-fragmentation chain-transfer (RAFT) polymerization. The understanding of some fundamental aspects about ion transport and relaxation mechanism in PIL and PIL copolymers are investigated using dielectric spectroscopy via several theoretical models. The influence of copolymer compositions, physical blending of neat PIL and PMMA, size of counter anions (Cl⁻ and TFSI⁻) and variation of molecular weights on thermal stability, moisture sensitivity, ionic transport and relaxation properties are also studied. An enhancement of thermal stability and ionic transport property of the PIL copolymer is observed compared to those of the physically mixed blend of two homopolymers with same compositions. The incorporation of hydrophobic PMMA segment definitely decreases the moisture content in PIL copolymers than the PIL itself. In all these PIL- based systems, the temperature dependence of ionic conductivity, relaxation time and ion diffusivity are well described by Vogel-Tammann-Fulcher model. The studies of some fundamental properties of these new PIL copolymers with less moisture sensitivity may help in using them as potential polymer electrolytes in energy storage devices.     

Crosslinked Poly(ionic liquid) Nanoparticles: Inner Structure,Size, and Morphology

In this contribution, we present the highly ordered inner structure of crosslinked poly(ionic liquid) nanoparticles. Cryogenic transmission electron microscopy revealed that they resembled centric multilamellar vesicles of different geometries, depending on the exact length of the quaternizing alkyl chains. The nanoparticle size was found to be sensitive to the polymerization conditions, such as the concentrations of monomers and crosslinking agents, the anion type and the externally added salt, but fairly inert to the polymerization temperature and the amount of initiator. The size expansion of the nanoparticles in different polymerization runs was found to be either isotropic or anisotropic via their linear attachment under certain polymerization conditions.     

褐煤在离子液体1-丁基-3-甲基咪唑氯盐中热溶及热溶产物的分离与分析

基于离子液体对煤的高效解聚性能,对先锋褐煤(XL)、锡林郭勒褐煤(XLGL)和胜利褐煤(SL)在离子液体1-丁基-3-甲基咪唑氯盐([Bmim]Cl)中的热溶性能进行了研究.同时,对XL在离子液体[Bmim]Cl中的热溶产物进行了分离,并对分离所得各组分进行了分析表征来研究褐煤的结构信息.研究发现,在相同条件下离子液体[Bmim]Cl对不同褐煤的萃取性能显著不同,其顺序为XL>SL>XLGL.先锋褐煤离子液体热溶物可分离为丙酮可溶物、吡啶可溶物和吡啶不溶物,其中,丙酮可溶物(AS)为15.9%、吡啶可溶物(PS)为56.0%、吡啶不溶物(PI) 为28.1%.分析表明,丙酮可溶物中含有长链的脂肪化合物及部分三环、四环等芳香化合物,吡啶可溶物和吡啶不溶物中大多以三环及五环芳香化合物的形式存在.     

Electrosynthesis of polyaniline in ionic liquid and its electrocatalytic properties

Ionic liquid like 1-butyl-3-methyl-imidazolium tetrafluorobrate ([BMIM]BF₄) has been used as solvent and electrolyte for the electropolymerization of aniline at glassy carbon electrode by cyclic voltammetry. Electrode modified with polyaniline (PAn) has obvious electrochemical activity in ionic liquid and acid solution (pH 0–4), and has significant electrocatalytic activity for redox reaction of catechol and hydroquione. __________ Translated from Journal of East China Normal University (Natural Science), 2005, 3 (in Chinese)     

Electrochemical behaviors of guanosine on carbon ionic liquid electrode and its determination

The electrochemical behaviors of guanosine on the ionic liquid of N-butylpyridinium hexafluorophosphate (BPPF₆) modified carbon paste electrode (CPE) was studied in this paper and further used for guanosine detection. Guanosine showed an adsorption irreversible oxidation process on the carbon ionic liquid electrode (CILE) with the oxidation peak potential located at 1.12 V (vs. SCE) in a pH 4.5 Britton-Robinson (B-R) buffer solution. Compared with that on the traditional carbon paste electrode, small shift of the oxidation peak potentials appeared but with a great increment of the oxidation peak current on the CILE, which was due to the presence of ionic liquid in the modified electrode adsorbed the guanosine on the surface and promoted the electrochemical response. The electrochemical parameters such as the electron transfer coefficient (α), the electron transfer number (n), and the electrode reaction standard rate constant (k_s) were calculated as 0.74, 1.9 and 1.26 × 10⁻⁴ s⁻¹, respectively. Under the optimal conditions the oxidation peak current showed a good linear relationship with the guanosine concentration in the range from 1.0 × 10⁻⁶ to 1.0 × 10⁻⁴ mol/L by cyclic voltammetry with the detection limit of 2.61 × 10⁻⁷ mol/L (3σ). The common coexisting substances showed no interferences to the guanosine oxidation. The CILE showed good ability to distinguish the electrochemical response of guanosine and guanine in the mixture solution. The urine samples were further detected by the proposed method with satisfactory results.     

Epoxidation of olefins catalyzed by manganese(III) porphyrin in a room temperature ionic liquid

The epoxidation of several alkenes catalyzed by (meso-tetrakis(pentafluorophenyl)porphinato) manganese(III) chloride (MnTFPPCl) was carried out in a 3:1 [bmim]PF₆ ionic liquid/CH₂Cl₂ mixed solvent. The conversion and the yield of epoxide are excellent. It was also found that [bis(acetoxy)iodo]benzene [PhI(OAc)₂] is a more efficient oxidant than PhIO. The catalyst in the ionic liquids can be recycled for several runs without substantial diminution in the catalytic activity.     

Oxidation of alkanes catalyzed by manganese(III) porphyrin in an ionic liquid at room temperature

Efficient oxidation of alkanes is achieved by using an electron-deficient manganese(III) porphyrin catalyst in combination with iodobenzene diacetate in an ionic liquid at room temperature; a high-valent manganese-oxo porphyrin complex (Mn^VO) was considered as the reactive oxidation intermediate.