Hard‐block degradable thermoplastic urethane‐elastomers for electrospun vascular prostheses

Thermoplastic polyurethane (TPU) elastomers with biodegradable chain extenders were synthesized and tested for mechanical performance and biocompatibility. The design of the TPUs was based on structural modification of a mechanically appropriate aromatic isocyanate‐based TPU. As the aromatic isocyanate was substituted with a less toxic but also less “hard” aliphatic isocyanate, the chain extender plays an important role on the mechanical properties. Here, the terephthalate ester chain extender was found to work better than hydroxyl ethyl lactate in providing polymers with mechanical properties similar to commercial aromatic isocyanate‐based TPUs. The polymers were degraded in aqueous solutions at elevated temperatures and compared to polylactic acid (PLA) to partially simulate biodegradation. The lactate‐based TPUs degraded about twice as fast as PLA while the terephthalate‐based TPU degraded much more slowly. The latter material was processed by electrospinning to give a tubular graft approximately the size of a large rat blood vessel. Initial results from implantation of these TPUs into rats are promising and indicate that biodegradation occurs and is likely beneficial to cell proliferation. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

A structural reconsideration: Linear aliphatic or alicyclic hard segments for biodegradable thermoplastic polyurethanes?

Thermoplastic polyurethane elastomers (TPUs) with a biodegradable chain extender and different nonaromatic diisocyanate hard segments were synthesized and tested concerning their thermal, mechanical, and degradation properties and for their processability regarding electrospinning. The design of the TPUs was based on the structural modification of the hard segment using linear aliphatic hexamethylene diisocyanate (HMDI), more rigid alicyclic 4,4′-methylene bis(cyclohexylisocyanate) (H12MDI), 1,3-bis(isocyanatomethyl)cyclohexane (BIMC), or isophorone diisocyanate (IPDI). The soft segment consisted of poly(tetrahydrofuran). Bis(2-hydroxyethyl) terephthalate (BET) was used as chain extender with cleavable ester bonds. Some of the polyurethanes based on alicyclic diisocyanate showed better mechanical performance than the less rigid HMDI-based TPU. The TPU in vitro degradability was tested for 25 days at elevated temperatures in PBS buffer and indicated a bulk erosion process. Electrospinning experiments were conducted and promising results with respect to further applicability of these materials in vascular tissue engineering were obtained. © 2018 The Authors Journal of Polymer Science Part A: Polymer Chemistry Published by Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2214–2224     

Compositional effect on the morphology and ionic conductivity of thermoplastic polyurethane based electrolytes

Four thermoplastic polyurethanes (TPUs) were synthesized from poly(ethylene glycol) (PEG), 4,4^′-methylenebis(phenyl isocyanate) (MDI), and 1,4-butanediol (1,4-BDO) with different 1,4-BDO/PEG ratios. The effect of polymer structure on the conductivity of the polymer elelctrolytes was investigated. Fourier transform infrared spectroscopy (FT-ir) and differential scanning calorimetry (DSC) were utilized to monitor changes in the morphology of the TPUs as polymeric solid electrolyte doped with LiClO₄. The structure of the TPUs has been investigated by 1H solution nuclear magnetic resonance spectroscopy. Alternating current (AC) impedance experiments were performed to determine the ionic conductivities of TPU films and their corresponding gel type electrolytes. The conductivity depends on the soft-segment concentration and on the degree of phase separation exhibited by these materials. One of the investigated TPU gel type electrolytes exhibits an ionic conductivity as high as 3×10⁻⁴ S/cm at room temperature.     

Synthesis of Flexible Elastomeric Polyurethane Films with High Elasticity and Evaluation of Their Structural Permanency

Flexible elastomeric polyurethane (EPU) films were synthesized by ultraviolet (UV) curing of thermoplastic polyurethanes (TPUs) through the reaction among poly (oxytetramethylene) diol (PTMO), isophorone diisocyanate (IPDI), cis-2-butene-1,4-diol (cis-BDO), and 1,6-hexanediol diacrylate (HDDA). In order to improve elasticity and structural permanency in the synthesized TPUs, cross-linking reaction involving unsaturated groups of chain extender (cis-BDO) and reactive diluent (HDDA) using 27 and 41 seconds of UV radiation is introduced. Investigation of structure and mechanical properties was performed using FTIR, GPC, and tensile tests. Stress-strain behavior showed that Young's moduli of EPUs were in the range of 0.2 to 0.4 MPa, which is evidence for high flexibility. Three times of repeated loading on one sample up to 100% strain with 10 min intervals for its recovery showed that considerable structural change didn't occur under these conditions and all observed permanent sets vanished within a time not exceeding 10 min.     

Electrospinning of biostable polyisobutylene-based thermoplastic polyurethanes

Electrospinning of a previously synthesized biostable polyisobutylene (PIB)-based thermoplastic polyurethanes (TPU) have been performed as materials with potential applications as vascular grafts. Electrospun mats were generated with fiber diameters in the submicron to 2 μm range as observed using scanning electron microscopy. Porosity of electrospun TPU fiber mats was investigated using Hg intrusion porosimetry. Fiber mats were found to have a distribution of pore sizes between 100 nm and 100 μm, with overall porosity between 50 and 70%. Thermal analysis of electrospun mats showed orientation of the TPU chains compared to the bulk as-synthesized material. Tensile failure properties were characterized, showing ultimate tensile strength of 1.6–6.5 MPa and ultimate elongation of ∼300–100% with TPUs of increasing hardness from Shore 60A to 100A. Strain-recovery experiments showed good recovery of tensile strain at significant stresses. The previously demonstrated biostability of these PIB-based TPUs, together with the excellent reported mechanical properties, indicates great promise for these materials as biostable vascular grafts. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Microstructure and properties of polyurethanes derived from castor oil

The goal of this work was the synthesis of novel segmented polyurethanes with a high percentage of components derived from renewable sources. The soft segment was a polyol derived from castor oil and the hard segment structure was varied by means of different chain extenders, petrochemical-based 1,4-butanediol (BD) and corn sugar-based 1,3-propanediol (PD). The synthesis was carried out in bulk and without catalyst via a two-step polymerization varying hard segment ratio. Physico-chemical, mechanical and morphological characterization was performed by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), atomic force microscopy (AFM), mechanical testing and termogravimetric analysis (TGA). Properties have been discussed from the viewpoint of hard/soft microdomain phase separation and also the hard segment nature and formed structure. An increase in hard segment content was accompanied by an increase in hard domain order, crystallinity, and stiffness. The hard segment structures, in addition to the elastic nature of soft segment, provide enough physical crosslink sites to impart properties ranging from elastomeric to rigid behaviour with the increase of hard segment content. Polyurethanes synthesized from bio-based chain extender showed a slightly lower crystallinity in the hard segment structure than that synthesized from BD as the chain extender. This lower crystallinity avoids strength concentrations at the soft/crystalline hard segment interface, thus improving the mechanical properties at high hard segment content. The slightly higher thermal stability observed for BD based polyurethanes is related with their more packed structures and crystallinity observed in the hard segment structure.     

Surface characterization and protein interactions of segmented polyisobutylene-based thermoplastic polyurethanes

The surface properties and biocompatibility of a class of thermoplastic polyurethanes (TPUs) with applications in blood-contacting medical devices have been studied. Thin films of commercial TPUs and novel polyisobutylene (PIB)-poly(tetramethylene oxide) (PTMO) TPUs were characterized by contact angle measurements, X-ray photoelectron spectroscopy, and atomic force microscopy (AFM) imaging. PIB-PTMO TPU surfaces have significantly higher C/N ratios and lower amounts of oxygen than the theoretical bulk composition, which is attributed to surface enrichment of PIB. Greater differences in the C/N ratios were observed with the softer compositions due to their higher relative amounts of PIB. The contact angles were higher on PIB-PTMO TPUs than on commercial polyether TPUs, indicating lower surface energy. AFM imaging showed phase separation and increasing domain sizes with increasing hard segment content. The biocompatibility was investigated by quantifying the adsorption of fouling and passivating proteins, fibrinogen (Fg) and human serum albumin (HSA) respectively, onto thin TPU films spin coated onto the electrode of a quartz crystal microbalance with dissipation monitoring (QCM-D). Competitive adsorption experiments were performed with a mixture of Fg and albumin in physiological ratio followed by binding of GPIIb-IIIa, the platelet receptor ligand that selectively binds to Fg. The QCM-D results indicate similar adsorbed amounts of both Fg and HSA on PIB-PTMO TPUs and commercial TPUs. The strength of the protein interactions with the various TPU surfaces measured with AFM (colloidal probe) was similar among the various TPUs. These results suggest excellent biocompatibility of these novel PIB-PTMO TPUs, similar to that of polyether TPUs.     

Dynamic Bonds Mediate π-π Interaction via Phase Locking Effect for Enhanced Heat Resistant Thermoplastic Polyurethane

Stimulus-responsive polymers containing dynamic bonds enable fascinating properties of self-healing, recycling and reprocessing due to enhanced relaxation of polymer chain/network with labile linkages. Here, we study the structure and properties of a new type of thermoplastic polyurethanes (TPUs) with trapped dynamic covalent bonds in the hard-phase domain and report the frustrated relaxation of TPUs containing weak dynamic bond andπ-πinteraction in hard segments. As detected by rheometry, the aromatic TPUs with alkyl disulfide in the hard segments possess the maximum network relaxation time in contrast to those without dynamic bonds and alicyclic TPUs. In situ FTIR and small-angle scattering results reveal that the alkyl disulfide facilitates stronger intermolecular interaction and more stable micro-phase morphology inπ-πinteraction based aromatic TPUs. Molecular dynamics simulation for pure hard segments of model molecules verify that the presence of disulfide bonds leads to strongerπ-πstacking of aromatic rings due to both enhanced assembling thermodynamics and kinetics. The enhancedπ-πpacking and micro-phase structure in TPUs further kinetically immobilize the dynamic bond. This kinetically interlocking between the weak dynamic bonds and strong molecular interaction in hard segments leads to much slower network relaxation of TPU. This work provides a new insight in tuning the network relaxation and heat resistance as well as molecular self-assembly in stimulus-responsive dynamic polymers by both molecular design and micro-phase control toward the functional applications of advanced materials.     

SYNTHETIC STUDIES ON BLOOD COMPATIBLE BIOMATERIALS 13:A NOVEL SEGMENTED POLYURETHANE CONTAINING PHOSPHORYLCHOLINE STRUCTURE:SYNTHESIS,CHARACTERIZATION AND BLOOD COMPATIBILITY EVALUATION

A new phosphorylcholine, (6-hydroxy) hexyl-2-(trimethylammonio) ethyl phosphate (HTEP), was synthesized andcharasterized. Segmented polyurethane (SPU) containing phosphorylcholine structure was synthesized based ondiphenylmethane diisocyanate (MDI), soft segment polytetramethylene glycol (PTMG) and HTEP, with 1,4-butanediol (BD)as a chain extender. The existence of phosphorylcholine structure on the surface of SPU was revealed by attenuated totalreflectance Fourier transform infrard spectroscopy (ATR-FTIR), X-ray photoelectron spectroscopy (XPS) and water contactangle measurements. The blood compatibilities of the polymers were evaluated by hemolytic testing and a platelet-richplasma (PRP) adhesion experiment, which was viewed by scanning electron microscopy (SEM) with polyurethane as areference. The novel segmented polyurethane containing phosphorylcholine structure showed improved blood compatibility.     

Shape Memory Properties and Enzymatic Degradability of Poly(ε‐caprolactone)‐Based Polyurethane Urea Containing Phenylalanine‐Derived Chain Extender

Biodegradable shape memory polymers are promising biomaterials for minimally invasive surgical procedures. Herein, a series of linear biodegradable shape memory poly(ε‐caprolactone) (PCL)‐based polyurethane ureas (PUUs) containing a novel phenylalanine‐derived chain extender is synthesized. The phenylalanine‐derived chain extender, phenylalanine‐hexamethylenediamine‐phenylalanine (PHP), contains two chymotrypsin cleaving sites to enhance the enzymatic degradation of PUUs. The degradation rate, the crystallinity, and mechanical properties of PUUs are tailored by the content of PHP. Meanwhile, semicrystalline PCL is not only hydrolytically degradable but also vital for shape memory. Good shape memory ability under body temperature is achieved for PUUs due to the strong interactions in hard segments for permanent crosslinking and the crystallization‐melt transition of PCL to switch temporary shape. The PUUs would have a great potential in application as implanting stent.     

Oxygen permeability in thermoplastic polyurethanes

The thermal and oxygen transport properties of a series of thermoplastic polyurethanes (TPUs) based on 4,4′‐methylene diisocyanate (MDI) and 1,4‐butanediol (BD) as hard segments, and poly(tetramethylene glycol) (PTMG) or poly(butylene adipate) (PA) as soft segments, are studied. Oxygen permeabilities (P) of both polyester‐based and polyether‐based TPUs increase with decreasing hard segment fractions. Oxygen solubility (S) and diffusivity (D) can be derived from permeation curves. S correlates with the amount of excess free volume as determined by the difference between glass‐transition and testing temperatures (i.e., the degree of super cooling) and decreases with the increased T_g in polyester‐based TPUs. The intensity of low temperature gamma transition reflects the activation energy for D; the higher the intensity is, the lower D is annealed TPU samples exhibited higher oxygen permeabilities as well as lower storage moduli at room temperature, despite modest increases in overall crystallinity. Dedensification of the soft segment phase during annealing/crystalline phase growth is the most likely explanation for loss of mechanical and barrier properties after annealing as partially confirmed by Fourier transform infrared spectroscopy. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Effect of Chain Extender on Hydrogen Bond and Microphase Structure of Biodegradable Thermoplastic Polyurethanes

Thermomechanical properties of polyurethanes (PUs) strongly depend on the molecular interactions and microphase structure.In this work,two chain extenders with different ratios,flexile 1,4-butanediol (BDO) and branched trimethylolpropane mono allyl ether (TMPAE),are used to tune the molecular interactions and microphase structures of a series of biodegradable thermoplastic polyurethanes (TPUs).In TPUs,the biodegradable polycaprolactone (PCL,Mn of 2000) is used as soft segment while 1,6-diisocyanatohexane (HDI) and chain extenders are used as hard segment.Fourier transform infrared spectroscopy (FTIR),proton nuclear magnetic resonance spectroscppy (1H-NMR),gel permeation chromatography (GPC),differential scanning calorimetry (DSC),dynamic mechanical analysis (DMA) and mechanical tests were performed to characterize the bulk structure and properties of TPUs.Compared with BDO,the steric bulk of TMPAE is larger.The increment of TMPAE can help to increase the hydrogen bond content,microphase separation,and the elastic modulus ratio (R),which would strongly affect the thermomechanical property of the TPUs.The results of this work verify the importance of the structure of chain extender on the properties of TPUs.It provides valuable information for further understanding the structure-property relationships of these polyurethanes.     

含有偶氮染料侧基的聚氨酯（脲）的研究

用扩链法合成了一系列含有偶氮染料的侧基聚氨酯和聚脲。ＴＦ－ＩＲ、ＤＳＣ、ＤＭＡ的研究表明，聚合物有良好的力学性能，样品中软硬段的含量决定材料的物理性能。通过ＵＶ的测定，计算出样品均有较高的三阶非线性光学（ＮＬＯ）系数。     

双端羟基预聚物扩链制备高分子量聚对二氧环己酮

以1,4-丁二醇(BD)为引发剂, 辛酸亚锡为催化剂, 引发对二氧环己酮(PDO)开环聚合, 得到双端羟基型聚对二氧环己酮预聚物, 再以六亚甲基二异氰酸酯(HDI)为扩链剂制备高分子量的聚对二氧环己酮. 采用核磁共振谱对预聚物和扩链产物的结构进行了确认, 并详细考察了各种因素对扩链反应的影响. 研究结果表明, 加入适量的HDI, 于150 ℃反应60 min, 扩链效率在预聚物基础上可提高52倍, 而扩链产物的粘均分子量可达到25.7×104 g/mol.     

A novel flame retardant containing phosphorus,nitrogen, and sulfur

In this article, a novel intumescent flame retardant (IFR) PNSFR containing three flame-retardant elements, phosphorus, nitrogen, and sulfur was designed and synthesized. Then a series of flame-retardant thermoplastic polyurethanes (TPU) were prepared using the PNSFR. The effects of the flame retardant on the flammability of TPU/PNSFR composites were investigated by limited oxygen index (LOI) and UL-94 vertical burning. The results showed that TPU containing 10 mass% PNSFR had the highest LOI value (36) and could reach the V-0 rating. The flame-retardant mechanism of PNSFR in TPU was also disclosed using thermogravimetric analysis (TG), scanning electron micrograph, TG-infared spectrometry, and Fourier transform infrared spectroscopy. The sulfur and phosphorus elements of PNSFR can be kept in residual char. Moreover, an optimal loading amount of the IFR in TPU is in favor of forming dense and continuous char layer to prevent heat transfer and the spread of flammable gases. The IFR PNSFR may find potential use for various flame-retardant polyurethanes.     

Synthesis and characterization of radiopaque poly(ether urethane) with iodine‐Containing diol as chain extender

Novel radiopaque iodinated poly(ether urethane) (IPEU) was prepared by using iodine‐containing diol as chain extender in a normal two‐step condensation polymerization process. This new iodine‐containing diol was synthesized by iodination of terephthalic acid and then reaction with 3‐aminopropanol. The chemical structure of the diol chain extender and IPEU was characterized, and the basic properties of IPEU were measured and compared with PEU. X‐ray images showed that 15 wt % iodine‐containing IPEUs were highly radiopaque, and radiopacity did not decrease after 6‐week oxidative degradation treatment. Experimental results showed that IPEUs possessed good thermal stability, favorable mechanical properties, and noncytotoxicity. These results reveal that it is an effective route for the synthesis of biological polyurethane with radiopacity by using iodine‐containing diol as chain extender. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

支化反应型高分子量聚苯硫醚合成研究

本文以硫磺和对二氯苯为原料，在极性有机溶剂中合成聚苯硫醚（ＰＰＳ），加入含活性基团的二卤代苯作为共聚第三单体。研究表明，２，５－二氯硝基苯是一种较好的扩链剂，－ＮＯ２在反应中将被还原为－ＮＨ２，且－ＮＨ２在高温下与芳环进一步发生支化反应。当２，５－三氯硝基苯含量低于２％时，控制反应条件，能制得性能优良的支化反应型高分子量ＰＰＳ树脂。由于共聚第三单体量少，共聚物与中等分子量ＰＰＳ树脂具有相近的结构。     

Chain‐extended,hydroxyterminated‐polybutadiene‐based polyurethaneureas: Synthesis,reaction kinetics,and properties

Hydroxyterminated‐polybutadiene‐based prepolyurethanes were prepared with two different catalysts, dibutyltindilaurate (DBTDL) and triethylamine (TEA); chain extension of the prepolyurethanes followed with two different aromatic diamines, oxydianiline and 4,4′‐diaminodiphenylsulfone, in various concentrations. The prepolyurethane synthesis followed second‐order kinetics, with the DBTDL catalyst showing better efficiency for urethane formation than TEA. TEA‐catalyzed synthesis suffered from the self‐association of isocyanates as a major side reaction, following second‐order kinetics with respect to isocyanate concentration. Although there was a gradual increase in the intrinsic viscosity during prepolyurethane synthesis in the presence of DBTDL, the intrinsic viscosity remained almost constant with the progress of the reaction in the presence of TEA. The tensile properties of prepolyurethane and polyurethaneureas synthesized in DBTDL‐catalyzed reactions were higher than the properties of those synthesized in TEA‐catalyzed reactions. The variation of the tensile strength with the diamine concentration was correlated with the crosslink density and sol fraction. The solubility of the hard segment of polyurethaneurea in the reaction medium appeared to be important in influencing the tensile properties. The effects of the diamine concentration (chain extender) on the diffusion coefficient and activation energy of diffusion of toluene in polyurethaneureas were studied. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2978–2992, 2001     

Enhanced mechanical and shape memory properties of polyurethane block copolymers chain-extended by ethylene diamine

Effect on shape memory and mechanical properties of polyurethane (PU) copolymers by changing the chain extender from 1,4-butanediol (BD) to ethylenediamine (ED) was investigated. PU copolymers composed of the different ratio of hard and soft segment were prepared and characterized by IR, DSC, XRD, and UTM. Glass transition temperature of PU increased to room temperature range by adopting ED as a chain extender. The XRD peak pattern changed with hard segment content. ED type PU achieved the high mechanical properties at lower hard segment content than BD type PU. Especially, strain at break of ED type significantly improved compared to BD type. Shape recovery rates were similar for both types of PU, but ED type showed better shape retention rate than BD type. The reason for the differences between two types of PU is discussed in this paper.     

Synthesis and properties of novel poly(arylene ether)s and poly(arylene thioether)s based on a pyridazine biphenol or a phthalazine biphenol

Novel sulfur‐containing biphenol monomers were prepared in high yields by the reaction of 4‐mercaptophenol with chloropyridazine or chlorophthalazine compounds. High‐molecular‐weight poly(arylene ether)s were synthesized by a nucleophilic substitution reaction between these sulfur‐containing monomers and activated difluoro aromatic compounds. The inherent viscosities of these polymers ranged from 0.34 to 0.93 dL/g. The poly(pyridazine)s exhibited glass‐transition temperatures greater than 165 °C. The poly(phthalazine)s showed higher glass‐transition temperatures than the poly(pyridazine)s. A polymer synthesized from a bisphthalazinebiphenol and bis(4‐fluorophenyl)sulfone had the highest glass‐transition temperature (240 °C). The thermal stabilities of the poly(pyridazine)s and poly(phthalazine)s showed similar patterns of decomposition, with no significant weight loss below 390 °C. The poly(phthalazine)s were soluble in chlorinated solvents such as chloroform, and the poly(pyridazine)s were soluble in dipolar aprotic solvents such as N,N′‐dimethylacetamide. The soluble poly(pyridazine)s and poly(phthalazine)s could be cast into flexible films from solution. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 262–268, 2007