共查询到20条相似文献,搜索用时 171 毫秒
1.
2.
利用杂质光伏效应能够使太阳电池充分利用那些能量小于禁带宽度的太阳光子,从而提高电池的转换效率.为了更好地利用杂质光伏效应提高砷化镓太阳电池的转换效率,本文利用数值方法研究在砷化镓太阳电池中掺入镍杂质以形成杂质光伏太阳电池,分析掺镍对电池的短路电流密度、开路电压以及转换效率的影响;同时,探讨电池的陷光结构对杂质光伏太阳电池器件性能的影响.结果表明:利用杂质光伏效应掺入镍杂质能够增加子带光子的吸收,使得电池转换效率提高3.32%;转换效率的提高在于杂质光伏效应使电池的红外光谱响应得到扩展;另外,拥有良好的陷光结构是取得好的杂质光伏效应的关键.由此得出:在砷化镓太阳电池中掺镍形成杂质光伏太阳电池是一种能够提高砷化镓太阳电池转换效率的新方法. 相似文献
3.
4.
5.
6.
利用光子能量为0.12 eV的10.6 μm连续激光分别辐照了禁带宽度为0.91和0.33 eV的光伏碲镉汞探测器. 实验表明,激光辐照下禁带宽度为0.91 eV的探测器输出正电压,而禁带宽度为0.33 eV的探测器对激光的响应方向却与之相反. 为了研究此现象,利用功率密度一定的10.6 μm激光辐照不同开路电压状态下禁带宽度为0.91 eV的探测器,实验结果证实初始开路电压是产生输出电压反向现象的原因. 对这一机理进一步分析发现,光伏探测器在光子能量小于禁带宽度的激光辐照下,其开路电压是热激发载流子导致的热生电动势和自由载流子吸收导致的晶格热效应共同决定的.
关键词:
能量小于禁带宽度的光子
光伏碲镉汞探测器
热生电动势
晶格热效应 相似文献
7.
基于GaSb薄膜热光伏器件是降低热光伏系统成本的有效途径之一, 本文主要针对GaSb/CdS薄膜热光伏器件结构进行理论分析. 采用AFORS-HET软件进行模拟仿真, 分析GaSb和CdS两种材料各自的缺陷态密度、界面态对电池性能的影响. 根据软件模拟可以得知, 吸收层GaSb的缺陷态密度以及GaSb与CdS之间的界面态密度是影响电池性能的重要因素. 当GaSb缺陷态增加时, 主要影响电池的填充因子, 电池效率明显下降. 而作为窗口层的CdS缺陷态密度对电池性能影响不明显, 当CdS缺陷态密度上升4个数量级时, 电池效率仅下降0.11%. 相似文献
8.
为选择合适的激光参量与光伏电池参量,以提高激光无线能量传输(LWPT)系统的能量转换效率,通过实验研究了LWPT系统中能量接收单元,也即光伏电池在半导体激光照射下的输出特性。通过波长为808 nm和915 nm的激光辐照GaAs和Si光伏电池,研究了不同激光功率密度、光伏电池温度、电池类型以及激光入射角度对光伏电池输出特性与能量转换效率的影响。实验中,在波长为808 nm的激光功率密度从0.06 W/cm2上升至0.37 W/cm2的过程中,Si电池的最大输出功率从0.12 W上升至0.32 W,能量转换效率从50.9%下降至21.2%;GaAs电池的最大输出功率从0.40 W上升到1.07 W,能量转换效率从57.9%下降至23.8%。随着激光功率密度的增加,光伏电池的输出功率先增加而后趋于饱和,但是高功率密度激光引起的电池温升会导致其光电转换效率的下降,所以激光功率密度的选择与光伏电池温度的控制是提高LWPT系统能量转换效率的关键因素。 相似文献
9.
有机聚合物/富勒烯本体异质结光伏电池以其不断提高的能量转换效率受到了研究人员的广泛关注, 近年来成为光伏电池研究领域的热点之一. 本文主要通过对聚合物/富勒烯太阳能电池的内部机理,包括光吸收、激子扩散和解离以及自由载流子输运和提取等关键科学问题, 从器件材料和结构优化、形貌控制和界面修饰等不同侧面介绍了提高聚合物/富勒烯太阳能电池性能的方法, 讨论了各种器件的结构和能量转换效率, 对于进一步开展这方面的研究工作指明了方向, 最后对其未来的发展前景做出了展望. 相似文献
10.
11.
An irreversible combined Carnot cycle model using ideal quantum gases as a working medium was studied by using finite-time thermodynamics. The combined cycle consisted of two Carnot sub-cycles in a cascade mode. Considering thermal resistance, internal irreversibility, and heat leakage losses, the power output and thermal efficiency of the irreversible combined Carnot cycle were derived by utilizing the quantum gas state equation. The temperature effect of the working medium on power output and thermal efficiency is analyzed by numerical method, the optimal relationship between power output and thermal efficiency is solved by the Euler-Lagrange equation, and the effects of different working mediums on the optimal power and thermal efficiency performance are also focused. The results show that there is a set of working medium temperatures that makes the power output of the combined cycle be maximum. When there is no heat leakage loss in the combined cycle, all the characteristic curves of optimal power versus thermal efficiency are parabolic-like ones, and the internal irreversibility makes both power output and efficiency decrease. When there is heat leakage loss in the combined cycle, all the characteristic curves of optimal power versus thermal efficiency are loop-shaped ones, and the heat leakage loss only affects the thermal efficiency of the combined Carnot cycle. Comparing the power output of combined heat engines with four types of working mediums, the two-stage combined Carnot cycle using ideal Fermi-Bose gas as working medium obtains the highest power output. 相似文献
12.
13.
Mori I. Sumitomo K. 《IEEE transactions on plasma science. IEEE Nuclear and Plasma Sciences Society》1988,16(6):623-630
An application of ambipolar potential in a magnetized plasma is proposed for direct energy conversion. Analyses of a model device for 20-MW-per-unit-length (without considering end loss) and 14-MW-per-unit-length (with the end loss) are shown. The plasma density profile, the potential distribution in the device, and the voltage-current characteristics are obtained on the basis of the Poisson continuity equation system. As an example, a theoretical energy loss by neutral particles, which should not affect the total efficiency much. Experiments with a small thermal ionization-type device were performed wherein the relations of output voltage versus current and power versus impedance were acquired. the experimental results are compared with the theoretical and a qualitative agreement is obtained 相似文献
14.
This paper elucidates the energy transfer and conversion processes in near-field thermophotovoltaic (TPV) systems, considering local radiation absorption and photocurrent generation in the TPV cell. Radiation heat transfer in a multilayered structure is modeled using the fluctuation-dissipation theorem, and the electric current generation is evaluated based on the photogeneration and recombination of electron-hole pairs in different regions of the TPV cell. The effects of near-field radiation on the photon penetration depth, photocurrent generation, and quantum efficiency are examined in the spectral region of interest. The detailed analysis performed in the present work demonstrates that, while the near-field operation can enhance the power throughput, the conversion efficiency is not much improved and may even be reduced. Subsequently, a modified design of near-field TPV systems is proposed to improve the efficiency. 相似文献
15.
Applying finite time thermodynamics theory and the non-dominated sorting genetic algorithm-II (NSGA-II), thermodynamic analysis and multi-objective optimization of an irreversible Diesel cycle are performed. Through numerical calculations, the impact of the cycle temperature ratio on the power density of the cycle is analyzed. The characteristic relationships among the cycle power density versus the compression ratio and thermal efficiency are obtained with three different loss issues. The thermal efficiency, the maximum specific volume (the size of the total volume of the cylinder), and the maximum pressure ratio are compared under the maximum power output and the maximum power density criteria. Using NSGA-II, single-, bi-, tri-, and quadru-objective optimizations are performed for an irreversible Diesel cycle by introducing dimensionless power output, thermal efficiency, dimensionless ecological function, and dimensionless power density as objectives, respectively. The optimal design plan is obtained by using three solution methods, that is, the linear programming technique for multidimensional analysis of preference (LINMAP), the technique for order preferences by similarity to ideal solution (TOPSIS), and Shannon entropy, to compare the results under different objective function combinations. The comparison results indicate that the deviation index of multi-objective optimization is small. When taking the dimensionless power output, dimensionless ecological function, and dimensionless power density as the objective function to perform tri-objective optimization, the LINMAP solution is used to obtain the minimum deviation index. The deviation index at this time is 0.1333, and the design scheme is closer to the ideal scheme. 相似文献
16.
On the basis of the established irreversible simple closed gas turbine cycle model, this paper optimizes cycle performance further by applying the theory of finite-time thermodynamics. Dimensionless efficient power expression of the cycle is derived. Effects of internal irreversibility (turbine and compressor efficiencies) and heat reservoir temperature ratio on dimensionless efficient power are analyzed. When total heat conductance of two heat exchangers is constant, the double maximum dimensionless efficient power of a cycle can be obtained by optimizing heat-conductance distribution and cycle pressure-ratio. Through the NSGA-II algorithm, multi-objective optimizations are performed on the irreversible closed gas turbine cycle by taking five performance indicators, dimensionless power density, dimensionless ecological function, thermal efficiency, dimensionless efficient power and dimensionless power output, as objective functions, and taking pressure ratio and heat conductance distribution as optimization variables. The Pareto frontiers with the optimal solution set are obtained. The results reflect that heat reservoir temperature ratio and compressor efficiency have greatest influences on dimensionless efficient power, and the deviation indexes obtained by TOPSIS, LINMAP and Shannon Entropy decision-making methods are 0.2921, 0.2921, 0.2284, respectively, for five-objective optimization. The deviation index obtained by Shannon Entropy decision-making method is smaller than other decision-making methods and its result is more ideal. 相似文献
17.
An improved irreversible closed modified simple Brayton cycle model with one isothermal heating process is established in this paper by using finite time thermodynamics. The heat reservoirs are variable-temperature ones. The irreversible losses in the compressor, turbine, and heat exchangers are considered. Firstly, the cycle performance is optimized by taking four performance indicators, including the dimensionless power output, thermal efficiency, dimensionless power density, and dimensionless ecological function, as the optimization objectives. The impacts of the irreversible losses on the optimization results are analyzed. The results indicate that four objective functions increase as the compressor and turbine efficiencies increase. The influences of the latter efficiency on the cycle performances are more significant than those of the former efficiency. Then, the NSGA-II algorithm is applied for multi-objective optimization, and three different decision methods are used to select the optimal solution from the Pareto frontier. The results show that the dimensionless power density and dimensionless ecological function compromise dimensionless power output and thermal efficiency. The corresponding deviation index of the Shannon Entropy method is equal to the corresponding deviation index of the maximum ecological function. 相似文献
18.
Pengchao Zang Lingen Chen Yanlin Ge Shuangshuang Shi Huijun Feng 《Entropy (Basel, Switzerland)》2022,24(8)
Considering that the specific heat of the working fluid varies linearly with its temperature, this paper applies finite time thermodynamic theory and NSGA-II to conduct thermodynamic analysis and multi-objective optimization for irreversible porous medium cycle. The effects of working fluid’s variable-specific heat characteristics, heat transfer, friction and internal irreversibility losses on cycle power density and ecological function characteristics are analyzed. The relationship between power density and ecological function versus compression ratio or thermal efficiency are obtained. When operating in the circumstances of maximum power density, the thermal efficiency of the porous medium cycle engine is higher and its size is less than when operating in the circumstances of maximum power output, and it is also more efficient when operating in the circumstances of maximum ecological function. The four objectives of dimensionless power density, dimensionless power output, thermal efficiency and dimensionless ecological function are optimized simultaneously, and the Pareto front with a set of solutions is obtained. The best results are obtained in two-objective optimization, targeting power output and thermal efficiency, which indicates that the optimal results of the multi-objective are better than that of one-objective. 相似文献
19.
20.
太阳能热电转换是光伏效应外另一种直接将太阳辐射转变为电能的途径, 近年来已经成为太阳能利用的热点之一. 本文以Bi2Te3材料为基础构建平板集热太阳热电器件模型, 采用有限元法分析AM1.5辐射条件下器件温度分布情况, 并结合基于温度的物性参数计算集热比、热臂截面积与长度变化等因素对器件的开路电压、 最大输出功率及转化效率的影响. 研究发现: 集热比与热臂长度的变化对器件性能有显著影响, 热臂截面积的变化对器件转化效率影响相对较弱; 在这一模型中, 平板集热太阳热电器件的转化效率达到1.56%. 相似文献