Phase-transfer oxidation of 2-methyl-1-naphthol into 2-methyl-1,4-naphthoquinone in the presence of vanadomolybdophosphoric heteropolyacids

2-Methyl-1-naphthol is oxidized into 2-methyl-1,4-naphthoquinone (menadione) by air in the presence of vanadomolybdophosphoric heteropolyacids and their salts. The reaction proceeds in a biphasic system, and the yield of menadione is up to 85 %. The influence of the composition of the heteropolyacids on the rate and the selectivity of the reaction was studied, and the reaction mechanism was proposed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1208–1211, July, 1994.     

β-甲萘醌催化氧化合成技术研究进展

综述了不同原料合成K系维生素重要中间体β-甲萘醌的不同方法及相应催化氧化体系建立的研究进展。与传统工业生产工艺相比较,着重分析以β-甲基萘为原料所采用的各催化剂类别及其催化氧化合成路线的特点和不足;结合国内外催化材料使用和国内生产现状,提出环境友好绿色催化氧化合成β-甲萘醌的未来发展趋势及研究方向。     

Studies on the interaction of Eu(III) with lawsone (2-hydroxy-1,4-naphthoquinone), lapachol (2-hydroxy-3-(3-methyl-2-butenyl)-1,4-naphthoquinone), juglone (5-hydroxy-1,4-naphthoquinone) and plumbagin (2-methyl-5-hydroxy-1,4-naphthoquinone)

pH-metric studies show that one mole of Eu(III) interacts with three molecules of each of juglone, plumbagin, lawsone and lapachol in solution. The stability and thermodynamics of these systems (50% aqueous acetone, 0.1 M KNO₃ ionic strength) are discussed and explained.     

The role of iron(II) phthalocyanine as a catalyst in Wacker oxidation of 1-decene

The Wacker oxidation of 1-decene to 2-decanone by dioxygen catalyzed by Pd(OAc)₂, hydroquinone and iron(II) phthalocyanine (FePc) in acidic aqueous dimethylformamide gives high yield m 40 min at room temperature. The major factors controlling the activity of the multi-component catalyst are the structure and morphology of the FePc, which were analyzed by IR spectroscopy, X-ray powder diffraction, scanning electron microscopy and BET surface area measurement. The dimeric μ-oxo(1) form of FePc is highly active, has higher surface area, and is less crystalline than the inactive monomeric β-FePc. The rate of oxidation using the most active catalyst is limited by the solubility of 1-decene in aqueous DMF.     

Potentiometric studies on the chelation behaviour of lanthanons with 3-hydroxy-2-methyl-1,4-naphthoquinone (HMNQ)

The chelation behaviour of complexes of La(III), Pr(III), Nd(III), Y(III), Sm(III) and Tb(III) with 3-hydroxy-2-methyl-1,4-naphthoquinone has been studied potentiometrically in 75% (v/v) aqueous dioxan medium at various ionic strengths. The method ofBjerrum andCalvin, as modified byIrving andRossotti, has been used to find values of andpL. The stability constants and the values ofS _min have been calculated. The order of stability constants was found to be: La<Pr<Nd<Sm<Tb.

---

Potentiometrische Untersuchungen des Komplexierungsverhaltens von Lanthanid-Ionen mit 3-Hydroxy-2-methyl-1,4-naphthochinon (HMNQ)

Zusammenfassung Das Komplexierungsverhalten der Komplexe von La(III), Pr(III), Nd(III), Y(III), Sm(III) und Tb(III) mit 3-Hydroxy-2-methyl-1,4-naphthochinon wurde potentiometrisch in 75% (v/v) wäßrigem Dioxan bei verschiedenen Ionenstärken untersucht. Die Methode vonBjerrum undCalvin in der Modifikation nachIrving undRossotti wurde zur Bestimmung der Werte für undpL benutzt. Es wurden die Stabilitätskonstanten und dieS _min -Werte berechnet; die Stabilitätskonstanten ergaben folgende Reihung: La<Pr<Nd<Sm<Tb.

     

Luminescence of 1,4-naphthoquinone and the vitamin K system in Shpolskii matrices at 4 K

This work investigates the high-resolution phosphorescence spectra of 1,4-naphthoquinone and the vitamin K system in Shpolskii solvents at 4 K. The quasi-linear vibronic bands are discussed with regard to spectral assignments and polarization data. The effect of non-totally symmetric vibrations is also discussed.     

C-H functionalization of 1,4-naphthoquinone by oxidative coupling with anilines in the presence of a catalytic quantity of copper(II) acetate

The oxidative addition of anilines (2) with 1,4-naphthoquinone (3) to give N-aryl-2-amino-1,4-naphthoquinones (1) was found to be catalyzed by copper(II) acetate. In the absence of the catalyst, the reactions are slower and give lower yields with the formation of many colateral products. In the presence of 10 mol % hydrated copper(II) acetate, the reactions are generally more efficient in that they are cleaner, higher yielding, and faster.     

Novel 2-amino-3-(2,4-dinitrophenylamino) derivatives of 1,4-naphthoquinone

The strong electron withdrawing nature of a 2,4-dinitrophenylamino group when attached to a chloro-naphthoquinone enhances the displacement of the chlorine atom by various aliphatic, cyclic and aromatic amines. A new series of 2-amino-3-(2,4-dinitrophenylamino) derivatives of 1,4-naphthoquinone were prepared. Three absorption maxima in the UV-vis spectra were typical, including one at 430-550 nm assigned to a CT transition.     

H2O和SO2对Ce(1)Mn(3)Ti催化剂催化氧化NO性能的影响

为了提高MNO_x/TiO₂催化剂催化氧化NO的活性,在载体TiO₂上负载醋酸锰的同时掺杂了一定量的硝酸铈,构成了Ce(1)Mn(3)Ti催化剂,并对催化剂进行XRD、BET和XPS等表征。重点考察了H₂O和SO₂对催化剂活性的影响,通过FT-IR、SEM和BET等表征手段对毒化前后的催化剂组成及结构进行了分析。结果表明,Ce(1)Mn(3)Ti催化剂具有较好的活性,在空速41 000 h^-1、NO体积分数为300×10^-6及O₂含量10%的条件下,反应温度200℃时NO转化率可达58%,250℃时NO转化率达到最高值85%。单独加入4%H₂O使得催化剂活性降低,升高反应温度,H₂O对催化剂的影响减弱;同时通入4%H₂O和100×10^-6SO₂,在反应温度250℃时,NO转化率下降并维持在48%左右,停止通入后恢复到61%。H₂O和SO₂使催化剂活性物种硫酸盐化失活。     

UiO-66-NH2负载铜催化剂的制备及其对醇的催化氧化

通过溶剂热法成功制备了一种基于金属有机骨架(MOF)的复合材料Cu-Cu₂O/UiO-66-NH₂,采用傅里叶变换红外光谱(FTIR)、X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)对材料进行全面表征。在空气作氧化剂条件下,以苯甲醇氧化为苯甲醛作为模型反应,系统地考察了溶剂、温度、催化剂各组分用量等因素对催化效果的影响。研究结果表明,该复合催化剂在醇选择性氧化反应中表现出优异的催化性能,60℃下反应5 h便可将苯甲醇定量转化为苯甲醛,并对其他苄基醇、烯丙基醇和杂芳基醇等底物也展现出良好活性。此外,循环利用3次后,该催化剂活性几乎不变,表明其具有良好的稳定性和重复使用性。     

UiO-66-NH2负载铜催化剂的制备及其对醇的催化氧化

通过溶剂热法成功制备了一种基于金属有机骨架(MOF)的复合材料Cu-Cu₂O/UiO-66-NH₂,采用傅里叶变换红外光谱(FTIR)、X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)对材料进行全面表征。在空气作氧化剂条件下,以苯甲醇氧化为苯甲醛作为模型反应,系统地考察了溶剂、温度、催化剂各组分用量等因素对催化效果的影响。研究结果表明,该复合催化剂在醇选择性氧化反应中表现出优异的催化性能,60℃下反应5 h便可将苯甲醇定量转化为苯甲醛,并对其他苄基醇、烯丙基醇和杂芳基醇等底物也展现出良好活性。此外,循环利用3次后,该催化剂活性几乎不变,表明其具有良好的稳定性和重复使用性。     

Spectrophotometric determination of cobalt in a vitamin, alloys and an ore by extraction of its 3-hydroxy-2-methyl-1,4-naphthoquinone 4-oxime complex into molten naphthalene

A selective spectrophotometric method has been developed for the determination of cobalt after extraction of its 3-hydroxy-2-methyl-1,4-naphthoquinone 4-oxime (HMNQM) complex into molten naphthalene. The optimum pH range for the extraction is 5.0-7.5. The solidified naphthalene, containing the cobalt-HMNQM complex, is separated by filtration and dissolved in N,N-dimethylformamide. The absorbance is measured at 430 nm against a reagent blank. Beer's law is obeyed up to 1.90 ppm cobalt. The molar absorptivity is 2.09 x 10(4) l.mole(-1).cm(-1).     

Synthesis and Transformations of 2-Hydroxy-2-(benzotriazol-1-yl)-1,4-naphthoquinone

2-Hydroxy-3-(benzotriazol-1-yl)-1,4-naphthoquinone reacts with o-phenylenediamine and 4-chloro-2-aminophenol to give cyclization products: 5-oxo-6-(benzotriazol-1-yl)-5,6H-benzo[a]phenazine and 5-oxo-6-(benzotriazol-1-yl)-10-chlorobenzo[a]phenoxazine; the reaction with aniline yields the quaternary anilinium salt, and benzoyl chloride and benzenesulfonyl chloride acylate the nitrogen atom of the benzotriazolyl moiety.     

Determination of iron in water samples by adsorptive stripping voltammetry with a bismuth film electrode in the presence of 1-(2-piridylazo)-2-naphthol

An adsorptive stripping voltammetry method for the determination of iron has been developed. The procedure is based on the adsorptive collection of a complex of iron with 1-(2-piridylazo)-2-naphthol (PAN) on a bismuth-coated glassy carbon electrode (BiFE). Factors affecting the stripping performance, such as pH, PAN concentration (C(PAN)), potential, accumulation time (E(ads), t(ads)), and interference by other ions were also studied. The optimum conditions were obtained in a 0.1 mol L(-1) acetate buffer at pH 4.0, C(PAN) 5.0 micromol L(-1), t(ads) 60 s, E(ads) -400 mV, pulse height 4.0 mV, pulse amplitude 25 mV, and frequency 15 Hz. The detection limit was found to be 0.1 microg L(-1) when a t(ads) of 60 s was used, and the linear range was from 0.4 to 60.0 microg L(-1). The proposed procedure was validated by determining of Fe(III) in CRM-MFD, QCS-19 and CRM-SW certified reference materials and applied in seawater samples with satisfactory results.