Kinetics and mechanisms of the redox reaction of hexaaquotitanium(III) and the ethylenediamine tetraacetato titanium(III) complex by aqueous solutions of bromine

At 25°C, I = 1.0 M (CF₃SO₃⁻Li⁺+CF₃SO₃H), [H⁺] = 0.034–0.274 M and λ = 453 nm, the rate equation for the oxidation of Ti(H₂O), ₆³⁺ by bromine was found to be: −d/[Br₂]T/dt=kK/[Br₂][Ti^III]/[H⁺]+K+kK/[Br₃⁻][Ti^III]/[H⁺+K, where k = 9.2 × 10⁻³ M ⁻¹ s ⁻¹ and K = 4.5 × 10⁻³ M. At [H⁺] = 1.0 M, [Br⁻] = 0.05–0.4 M, the apparent second-order rate constant decreases as [Br⁻] increases.

The pH-dependence of the oxidation of Ti^III-edta by bromine is interpreted in terms of the change in identity of the Ti^III-edta species as the pH of the reaction medium changes. The second-order rate constants were fitted using a non-linear least-square computer program with (1/k₀^edta)² weighting into an equation of the form: k₀^edta =k₁+k₂K₁[H⁺]⁻¹+k₃K₁K₂[H⁺]^−2/1+K₁[H⁺[H⁺⁻¹+K₁K₂[H⁺]⁻², with K₁ and K₂ fixed as earlier determined at 9.55 × 10⁻³ and 2.29 × 10⁻⁹ M, respectively, for the oxidation of bromine. k₁=k₂=(3.1±0.32)×10³M⁻¹s⁻¹ k₃=(2.3±0.45)×10⁶N⁻¹s⁻¹.

It is proposed that these electron transfer reactions proceed by univalent changes with the production of Br₂^.− as a transient intermediate. An outer-sphere mechanism is proposed for these reactions. The homonuclear exchange rate for Ti^III-edta+Ti^IV-edta is estimated at 32 M⁻¹ s⁻¹.     

Equilibrium and structural studies of silicon(IV) and aluminium(III) in aqueous solution—10. A potentiometric study of aluminium(III) pyrocatecholates and aluminium(III) hydroxo pyrocatecholates in 0.6 M Na(Cl)

Equilibria between aluminium(III), pyrocatechol (1,2-dihydroxybenzene, H₂L) and OH⁻ were studied in 0.6 M Na(Cl) medium at 25°C. The measurements were performed as emf titrations (glass electrode) within the limits 1.5 ≤ − log[H⁺] ≤ 9; 0.0005 ≤ B ≤ 0.015 M; 0.006 ≤ C ≤ 0.03 M and 2 ≤ C/B ≤ 30 (B and C stand for the total concentrations of aluminium(III) and pyrocatechol respectively). All data can be explained with a main series of complexes: A1L⁺, log β_−2,1,1 = − 6.337 ± 0.005; A1L₂⁻, log β_−4,1,2 = −15.44 ± 0.017 and A1L₃³⁻, log β_−6,1,3 = − 28.62 ± 0.024 together with two minor species: Al(OH)L₂²⁻, log β_−5,1,2 = − 23.45 ± 0.079 and Al₃(OH)₃L₃, log β_−9,3,3 = − 29.91 ± 0.066. Of the two, the latter probably is a type of average composition complex principally occurring at low C/B quotients. The first acidity constant for pyrocatechol as determined in separate experiments is log β_−1,0,1 = − 9.198 ± 0.001. The standard deviations given are 3σ(log β p,q,r). Data were analyzed with the least squares computer program LETAGROPVRID. In a model calculation using kaolinite as solid phase, we compared the complexation ability of this system with that of the system Al³⁺-OH⁻-salicylic acid, reported earlier in this series.     

Selective spectrophotometric determination of palladium(II) with 2(5-nitro-2-pyridylazo)-5-(N-propyl-N-3-sulfopropylamino)phenol(5-NO(2).PAPS) and tartaric acid with 5-NO(2).PAPS-niobium(V) complex

Spectrophotometric determinations of palladium(II) and tartaric acid were respectively investigated by using the color reactions between 2(5-nitro-2-pyridylazo)-5-(N-propyl-N-3-sulfopropylamino)phenol(5-NO₂.PAPS) and palladium(II) in strong acidic media, and between 5-NO₂.PAPS, niobium(V) tartaric acid in weak acidic media. The calibration graphs were linear in the range of 0–25 μg/10 ml palladium(II), with an apparent molecular coefficient () of 6.2×10⁴ l mol⁻¹ cm⁻¹ at 612 nm, and 0–23 μg/10 ml tartaric acid with =1.08×10⁶ l mol⁻¹ cm⁻¹ at 612 nm, respectively. The proposed methods were selective and sensitive in comparison with other chelating pyridylazo dyes–palladium(II) or metavanadic acid–tartaric acid method, and the effect of foreign ions such as copper(II) was negligible for the assay of palladium(II) with 5-NO₂.PAPS.     

Micellar effects on photoinduced redox reactions of Fe(bpy)2(CN)2

Excitation of solutions of Fe(bipy)₂(CN)₂ by a 266-nm laser pulse produces a hydrated electron and the oxidized complex, Fe(bipy)₂ (CN)₂⁺, in the primary photochemical step, in homogeneous aqueous solution as well as in aqueous solutions containing cetyltrimethylammonium bromide (CTAB) or sodium dodecyl sulfate (SDS) micelles. In all cases nascent hydrated electrons react with ground state Fe(bipy)₂(CN)₂ to form Fe(bipy)₂(CN)₂⁻, and comparison of the decay constants in the three media (H₂O: k = 2.8 × 10¹⁰ M⁻¹ s⁻¹; CTAB: k = 2.9 × 10¹⁰ M⁻¹ s⁻¹; SDS: k = 5.5 × 10⁹ M⁻¹ s⁻¹), shows that the reaction is essentially unaffected by CTAB micelles but is much slower in SDS solution. Similar micellar effects were found for the back reaction between e_aq⁻ and Fe(bpy)₂(CN)₂⁺. Rate constants for the scavenging of the photogenerated hydrated electrons by methyl viologen (MV²⁺) cations and NO₃⁻ anions were measured in the three systems, and the results indicate that for scavenging by MV²⁺ the rate constants are decreased in the micelle systems (k in H₂O, 8.4 × 10¹⁰; CTAB, 3.5 × 10¹⁰ and SDS, 1.58 × 10¹⁰ M⁻¹ s⁻¹), whereas for NO₃⁻ the CTAB micelle decreases while the SDS micelle enhances the scavenging compared to water solution (k in H₂O, 8.3 × 10⁹; CTAB, 7 × 10⁸; and SDS, 2.05 × 10¹⁰ M⁻¹ s⁻¹). For the comproportionation reaction between Fe(bipy)₂(CN)₂⁺ and Fe(bipy)₂(CN)₂⁻ both micelles reduce the rate (k in H₂O, 3.3 × 10¹⁰; CTAB, 2.3 × 10¹⁰; and SDS, 1.05 × 10¹⁰ M⁻¹s⁻¹), but while the reaction of Fe(bipy)₂(CN)₂⁺ with MV⁺ is increased in CTAB compared to water, it is slowed in SDS (k in H₂O, 2.4 × 10¹⁰; CTAB, 8.9 × 10¹⁰; and SDS, 1.8 × 10¹⁰ M⁻¹s⁻¹). All effects observed in these microheterogeneous systems can be uniformly interpreted in terms of Coulombic interactions between the actual reactants and the charged surface of the micelles.     

Structural investigation of dibromobis(benzimidazole)Zn(II) complex

The molecular structure of the title complex [ZnBr₂(C₇H₆N₂)₂] was investigated by X-ray diffraction and IR spectroscopy methods. Molecules of zinc(II) complex crystallize in the triclinic crystal system with cell constants a=7.526(2) Å, b=7.8971(8) Å, c=13.431(1) Å, Z=2 and V=791.3(2) Å³. In the molecular structure, the Zn atom is coordinated tetrahedrally by two Br⁻ anions and two benzimidazole ligands. Intramolecular steric repulsions between Br⁻ anions and benzimidazole groups have been caused to cis configuration around the central metal atom.     

Flow injection determination of bismuth in urine by successive retention of Bi(III) and tetrahydroborate(III) on an anion-exchange resin and hydride generation atomic absorption spectrometry

Bismuth as BiCl₄⁻ and BH₄⁻ ware successively retained in a column (150 mm × 4 mm, length × i.d.) packed with Amberlite IRA-410 (strong anion-exchange resin). This was followed by passage of an injected slug of hydrochloric acid resulting in bismuthine generation (BiH₃). BiH₃ was stripped from the eluent solution by the addition of a nitrogen flow and the bulk phases were separated in a gas–liquid separator. Finally, bismutine was atomized in a quartz tube for the subsequent detection of bismuth by atomic absorption spectrometry. Different halide complexes of bismuth (namely, BiBr₄⁻, BiI₄⁻ and BiCl₄⁻) were tested for its pre-concentration, being the chloride complexes which produced the best results. Therefore, a concentration of 0.3 mol l⁻¹ of HCl was added to the samples and calibration solutions. A linear response was obtained between the detection limit (3σ) of 0.225 and 80 μg l⁻¹. The R.S.D.% (n = 10) for a solution containing 50 μg l⁻¹ of Bi was 0.85%. The tolerance of the system to interferences was evaluated by investigating the effect of the following ions: Cu²⁺, Co²⁺, Ni²⁺, Fe³⁺, Cd²⁺, Pb²⁺, Hg²⁺, Zn²⁺, and Mg²⁺. The most severe depression was caused by Hg²⁺, which at 60 mg l⁻¹ caused a 5% depression on the signal. For the other cations, concentrations between 1000 and 10,000 mg l⁻¹ could be tolerated. The system was applied to the determination of Bi in urine of patients under therapy with bismuth subcitrate. The recovery of spikes of 5 and 50 μg l⁻¹ of Bi added to the samples prior to digestion with HNO₃ and H₂O₂ was in satisfactory ranges from 95.0 to 101.0%. The concentrations of bismuth found in six selected samples using this procedure were in good agreement with those obtained by an alternative technique (ETAAS). Finally, the concentration of Bi determined in urine before and after 3 days of treatment were 1.94 ± 1.26 and 9.02 ± 5.82 μg l⁻¹, respectively.     

Thiocyanato adducts of chromium(II) carboxylates and the molecular structure of tetraethyl-ammonium tetra-μ-propionatodiisothio-cyanatodichromate(II)

X-Ray crystallographic studies on [NEt₄]₂[Cr₂[(O₂CC₂H₅)₄(NCS)₂] show that the Cr–Cr separation (2.467Å) in the dinuclear anion is one of the longest known. The thiocyanato groups are N-bonded, and the results emphasize the known sensitivity of the quadruple Cr–Cr bond to the nature of the axial ligands. The compound crystallises in the tetragonal space group P4/mnc with two molecules per unit cell, the dimensions of which are a = b = 9.785(1), c = 21.186(2) Å. Magnetic investigations from room to liquid nitrogen temperature on the tetra-μ-propionato complex and on [NMe₄]₂ [Cr₂(O₂CCH₃)₄(NCS)₂] show that both complexes have been obtained free from paramagnetic chromium(III) impurities. Their weak paramagnetic susceptibilities (X_cr is approx. 200 x 10⁻⁶ cm³ mol⁻¹ at 295 K and 50 x 10⁻⁶cm³mol⁻¹ at 90 K) are inherent, and are ascribed to temperature independent paramagnetism at low temperature plus para-magnetism arising from slight population of the triplet state (2J 700 cm⁻¹, g = 2, N = 50 x 10⁻⁶cm³mol⁻¹) at higher temperatures.     

Reverse flow injection spectrophotometric determination of iron(III) using chlortetracycline reagent

A simple reversed flow injection colourimetric procedure for determining iron(III) was proposed. It is based on the reaction between iron(III) with chlortetracycline, resulting in an intense yellow complex with a suitable absorption at 435 nm. A 200 μl chlortetracycline reagent solution was injected into the phosphate buffer stream (flow rate 2.0 ml min⁻¹) which was then merged with iron(III) standard or sample in dilute nitric acid stream (flow rate 1.5 ml min⁻¹). Optimum conditions for determining iron(III) were investigated by univariate method. Under the optimum conditions, a linear calibration graph was obtained over the range 0.5–20.0 μg ml⁻¹. The detection limit (3σ) and the quantification limit (10σ) were 0.10 and 0.82 μg ml⁻¹, respectively. The relatives standard deviation of the proposed method calculated from 12 replicate injections of 2.0 and 10.0 μg ml⁻¹ iron(III) were 0.43 and 0.59%, respectively. The sample throughput was 60 h⁻¹. The proposed method has been satisfactorily applied to the determination of iron(III) in natural waters.     

[NHN] and [OHO] hydrogen bonding in the adduct of 1,8-bis(dimethylamino)naphthalene (DMAN) with 1,8-dihydroxy-2,4-dinitronaphthalene (DHDNN)

X-Ray diffraction, IR and ¹H NMR studies were performed on the 1:1 adduct of 1,8-bis(dimethylamino)naphthalene (DMAN) with 1,8-dihydroxy-2,4-dinitronaphthalene (DHDNN). The adduct crystallizes in the triclinic system, space group , a = 9.911(2) Å, b = 11.212(2) Å, c = 11.194(2) Å, = 68.95(2)°, β = 79.72(2)°, γ = 73.78(2)°, Z = 2. Both [NHN]⁺ and [OHO]⁻ hydrogen bonds formed in the ion pairs are asymmetrical with lengths equal to 2.574(2) Å and 2.466(4) Å respectively. The [NHN]⁺ bridge shows a typical behaviour in the IR spectrum, i.e. a low-frequency absorption between 300 and 700 cm⁻¹. The coupling of [OHO]⁻ hydrogen bonds with the naphthalene π-electron system is so strong that no absorption related to the proton stretching vibrations can be detected in the high- and low-frequency regions. The ¹H NMR chemical shifts for the [NHN]⁺ and [OHO]⁻ bridge protons of 18.63 and 15.81 ppm respectively confirm the strong hydrogen bonds.     

Kinetic study of gas-phase Lu(D3/2) with O2, N2O and CO2

The second-order rate constants of gas-phase Lu(²D_3/2) with O₂, N₂O and CO₂ from 348 to 573 K are reported. In all cases, the reactions are relatively fast with small barriers. The disappearance rates are independent of total pressure indicating bimolecular abstraction processes. The bimolecular rate constants (in molecule⁻¹ cm³ s⁻¹) are described in Arrhenius form by k(O₂)=(2.3±0.4)×10⁻¹⁰exp(−3.1±0.7 kJmol⁻¹/RT), k(N₂O)=(2.2±0.4)×10⁻¹⁰exp(−7.1±0.8 kJmol⁻¹/RT), k(CO₂)=(2.0±0.6)×10⁻¹⁰exp(−7.6±1.3 kJmol⁻¹/RT), where the uncertainties are ±2σ.     

Thermodynamics of (1,4-difluorobenzene + an n-alkane) and of (hexafluorobenzene + an n-alkane)

Excess molar enthalpies H^E and excess molar volumes V^E have been measured, as a function of mole fraction x₁, at 298.15 K and atmospheric pressure for the five liquid mixtures (x₁1,4-C₆H₄F₂ + x₂n-C_lH_2l+2), l = 7, 8, 10, 12 and 16. In addition, H^E and excess molar heat capacities C_P^E at constant pressure have been determined for the two liquid mixtures (x₁C₆F₆ + x₂n-C_lH_2l+2), l = 7 and 14, at the same temperature and pressure. The instruments used were flow microcalorimeters of the Picker design (the H^E version was equipped with separators) and a vibrating-tube densimeter, respectively.

The excess enthalpies of the five difluorobenzene mixtures are all positive and quite large; they increase with increasing chain length l of the n-alkane from H^E(x₁ = 0.5)/(J mol⁻¹) = 1050 for l = 7 to 1359 for l = 16. The corresponding excess volumes V^E are all positive and also increase with increasing l: V^E(x₁ = 0.5)/(cm³ mol⁻¹) = 0.650 for l = 7 and 1.080 for l = 16. Interestingly, the excess enthalphies of the corresponding mixtures with hexafluorobenzene are only about 5% larger, whereas the excess volumes of (x₁C₆F₆ + x₂n-C_lH_2l+2) are roughly twice as large as those of their counterparts in the series containing 1,4-C₆H₄F₂. Specifically, at 298.15 K H^E(x₁ = 0.5)/(J mol⁻¹) = 1119 for (x₁C₆F₆ + x₂n-C₇H₁₆) and 1324 for (x₁C₆F₆ + x₂n-C₁₄H₃₀), and for the same mixtures V^E(x₁ = 0.5)/(cm³ mol⁻¹) = 1.882 and 2.093, respectively. The excess heat capacities for both systems are negative and of about the same magnitude as the excess heat capacities of mixtures of fluorobenzene with the same n-alkanes (Roux et al., 1984): C_P^E(x₁ = 0.5)/(J K⁻¹ mol⁻¹) = −1.18 for (x₁C₆F₆ + x₂n-C₇H₁₆), and −2.25 for (x₁C₆F₆ + x₂n-C₁₄H₃₀). The curve C_P^E vs. (x₁ for x₁C₆F₆ + x₂n-C₁₄H₃₀) shows a sort of “hump” for x₁ 0.5, which is presumed to indicate emerging W-shape composition dependence at lower temperatures.     

Determination of pK(a)'s for thymol blue in aqueous medium: evidence of dimer formation

Formation constants for recrystallized thymol blue were determined in water, using the SQUAD and SUPERQUAD programs. The best model correlating spectrophotometric, potentiometric and conductimetric data was fitted with the dissociation of HL⁻=L²⁻+H⁺−log K=8.918±0.070 and H₃L₂⁻=2L²⁻+3H⁺−log K=29.806±0.133 with the SUPERQUAD program at variable low ionic strength (1.5×10⁻⁴–3.0×10⁻⁴ M); and HL=L²⁻+H⁺−log K=8.9±0.000, H₃L₂⁻ =2L²⁻+3H⁺−log K=30.730±0.032, H₄L₂=2L²⁻+4H⁺−log K=32.106±0.033 with SQUAD at 1.1 M ionic strength.     

Novel coordination of a hydroxamic acid : Crystal structures of bis(glycinohydroxamoto)nickel(II) and tris(glycinohydroxamoto)cobalt(III)

The structures of two glycinohydroxamoto (GHA) complexes of Ni(II) and Co(III) have been determined by single-crystal X-ray diffraction methods. The crystals of Ni(GHA)₂ are monoclinic with a = 5.360(1), b = 7.315(4), c = 10.194(4) Å, β = 96.57(3), Z = 2, and space group P2₁/c. The crystals of Co(GHA)₃•1/2 H₂O are monoclinic with a = 22.467(19), b = 8.041(4), c = 13.700(11) Å, β = 116.01(7), Z = 8, and space group C2/c. The values of the final residuals R for Ni(GHA)₂ and Co(GHA)₃•1/2 H₂O are 0.0275 and 0.032, respectvely. The molecular structures of Ni(GHA)₂ and Co(GHA)₃ consist of a square planar and an octahedral coordination, respectively, with the glycinohydroxamato (NH₂CH₂CONOH⁻) ligands coordinating to the metal ion via the N (amino) and the N (NOH⁻). These two complexes are the first well-established cases of coordination of the NHO⁻ group of a hydroxamic acid to a transition metal via the nitrogen atom.     

Heat capacities of NaNO3 and KNO3 from 350 to 800 K

The heat capacities of NaNO₃ and KNO₃ were determined from 350 to 800 K by differential scanning calorimetry. Solid-solid transitions and melting were observed at 550 and 583 K for NaNO₃ and 406 and 612 K for KNO₃, respectively. The entropies associated with the solid-solid transitions were measured to be (8.43± 0.25) J K⁻¹ mole⁻¹ for NaNO₃ and (13.8±0.4) J K⁻¹ mole⁻¹ for KNO₃. At 298.15 K the values of C⁰_P S⁰_P, {H⁰(T)-H⁰(0)}/T and -{G⁰(T)-H⁰(0)}/T, respectively, are 91.94, 116.3, 57.73, and 58.55 J K⁻¹ mole⁻¹ for NaNO₃ and 95.39, 133.0, 62.93, and 70.02 J K⁻¹ mole⁻¹ for KNO₃. Values for S⁰_T, {H⁰(T)-H⁰(0)}/T, and -{G⁰(T)-H⁰(0)}/T were calculated and tabulated from 15 to 800 K for NaNO₃ and KNO₃.     

Role of axial ligation on potentiometric response of Co(III) tetraphenylporphyrin-doped polymeric membranes to nitrite ions

Two types of Co(III) tetraphenylporphyrins, Co(III)TPPX (I) and Co(III)(N)TPPX (II), where X = C1⁻ or NO⁻₂ and N = C₅H₅N or C₆H₅CH₂C₅H₄N, are used as ionophores to prepare nitrite responsive polymeric membrane electrodes. The influence of the initial axial ligand (X⁻ and N) on the operative ionophore mechanism of these metalloporphyrins within the solvent polymeric membranes is examined. Results from potentiometric and electrodialysis experiments suggest that in the presence of nitrite in the test sample and internal solution, both types of Co (III) porphyrins studied (I and II) act as neutral carriers and that the addition of lipophilic cationic sites (e.g., tridodecylmethylammonium ions (TDMA⁺)) to the organic membrane is essential to improve the selectivity and long term stability of sensors prepared with these species. Membranes formulated with (I) or (II) in the nitrite form along with TDMACl in plasticized PVC films exhibit the following selectivity sequence: SCN⁻ > NO⁻₂ ˜ C1O⁻₄ > Sal⁻ > NO⁻₃ > Br⁻ > C1⁻. Membrane electrodes with added lipophilic cationic sites are shown to exhibit rapid, fully reversible and Nernstian response towards nitrite ions in the concentration range of 10⁻¹–10⁻⁵ M, with good long term stability.     

Structural and spectroscopic properties of Hexamethylenetetramine cobalt(II) complex: [Co(NCS)2(hmt)2(H2O)2][Co(NCS)2(H2O)4] (H2O)

Synthesis, structure, spectroscopy and thermal properties of complex [Co(NCS)₂(hmt)₂(H₂O)₂][Co(NCS)₂(H₂O)₄] (H₂O) (I), assembled by hexamethylenetetramine and octahedral Co(II) metal ions, are reported. Crystal data for I: F_w 387.34, a=9.020(8), b=12.887(9), c=7.95(1) Å, =96.73(4), β=115.36(5), γ=94.16(4)°, V=820(1) Å³, Z=2, space group=P−1, T=173 K, λ(Mo-K)=0.71070 Å, ρ_calc=1.718567 g cm⁻³, μ=17.44 cm⁻¹, R=0.088, R_w=0.148. An interesting two-dimensional network is assembled via hydrogen bonds through coordinated and free water molecules. The d–d transition energy levels of Co(II) ion are determined by UV–vis spectroscopy and calculated by ligand field theory. The calculated results agree well with experiment ones.     

High-field EPR investigation of a series of mononuclear Mn(II) complexes doped into Zn(II) hosts

The five-coordinate mono-halide mononuclear Zn(II) complexes [Zn(tpa)X]⁺ (tpa = tris(2-pyridylmethyl)amine; X = I ([Zn(tpa)I]I; 1a), Br ([Zn(tpa)Br](ZnBr₄)_0.5; 2a) and Cl ([Zn(tpa)Cl](ZnCl₄)_0.5; 3a)) and the six-coordinate mononuclear complex [Zn(tpa)(NCS)₂] (4a) have been synthesized and characterized by X-ray crystallography. The [Zn(tpa)X]⁺ complexes doped with the corresponding [Mn(tpa)X₂] complexes (X = I (1b), Br (2b) and Cl (3b)) have been synthesized and their electronic properties investigated by multifrequency high field EPR (HF-EPR) (95–285 GHz). The magnetically diluted conditions allow the determination of the hyperfine coupling constant A (A = 68.10⁻⁴ cm⁻¹ for 1b–3b). The zero-field splitting parameters (D and E) found for 1b–3b are comparable to those found for neat samples of the [Mn(tpa)X₂] complexes (1b: D = 0.635 cm⁻¹, E/D = 0.189; 2b: D = 0.360 cm⁻¹, E/D = 0.192; 3b: D = 0.115 cm⁻¹, E/D = 0.200). The efficacy of using multifrequency EPR under dilute conditions to precisely determine spin Hamiltonian parameters is discussed.     

Reverse flow injection spectrophotometric determination of iron(III) using norfloxacin

A reversed flow injection colorimetric procedure for determining iron(III) at the μg level was proposed. It is based on the reaction between iron(III) with norfloxacin (NRF) in 0.07 mol l⁻¹ ammonium sulfate solution, resulting in an intense yellow complex with a suitable absorption at 435 nm. Optimum conditions for determining iron(III) were investigated by univariate method. The method involved injection of a 150 μl of 0.04% w/v colorimetric reagent solution into a merged streams of sample and/or standard solution containing iron(III) and 0.07 mol l⁻¹ ammonium sulfate in sulfuric acid (pH 3.5) solution which was then passed through a single bead string reactor. Subsequently the absorbance as peak height was monitored at 435 nm. Beer's law obeyed over the range of 0.2–1.4 μg ml⁻¹ iron(III). The method has been applied to the determination of total iron in water samples digested with HNO₃–H₂O₂ (1:9 v/v). Detection limit (3σ) was 0.01 μg ml⁻¹ the sample through of 86 h⁻¹ and the coefficient of variation of 1.77% (n=12) for 1 μg ml⁻¹ Fe(III) were achieved with the recovery of the spiked Fe(III) of 92.6–99.8%.     

Spectrophotometric determination of tungsten(VI) enriched by nanometer-size titanium dioxide in water and sediment

The adsorption of W (VI) on different metal oxides (TiO₂, ZrO₂), different crystal form of TiO₂ (rutile, anatase) with high surface areas was studied and compared under different pH. A novel method for preconcentration of W (VI) with nanometer size titanium dioxide (rutile) and determination by spectrophotometry has been developed. W (VI) was selective adsorbed on 100 mg TiO₂ from 250 ml solution at pH 3.0, then eluted by 2 ml 9 mol l⁻¹ sodium hydroxide solution. The eluent was adjusted to 5 ml pH 0 solution, added 0.5 ml 12 mol l⁻¹ HCl, 0.3 ml 3% TiCl₃, 0.3 ml 50% NH₄SCN, stirred for 20 min, used for the analysis of W (VI) by measuring the absorbance at 402 nm with spectrophotometry, based on the chromogenic reaction between the W (VI) and the mixture of TiCl₃ and NH₄SCN. This method gave a concentration enhancement of 50 for 250 ml sample, eliminated the sizable interferences on direct determination with spectrophotometry. Detection limits (3σ, n=11) of 1.2 ng ml⁻¹, relative standard deviation of 2.3% at 10 ng ml⁻¹ level were obtained. The method was applied to determine the W (VI) in hot spring water, river water, tap water and stream sediment. Analytical recoveries of W (VI) added to samples were 98–101%.     

Simultaneous determination of trace uranium(VI) and zinc(II) by adsorptive cathodic stripping voltammetry with aluminon ligand

Uranium(VI) complexed with aluminon (3-[bis(3-carboxy-4-hydroxy-phenyl)methylene]-6-oxo-1,4-cyclohexadiene-1-carboxylic acid triammonium salt) was determined by adsorptive cathodic stripping voltammetry (ACSV) using a hanging mercury drop electrode. Trace uranium(VI) and zinc(II) can be simultaneously determined in a single scan in the presence of aluminon and urea. Optimal conditions were found to be: accumulation time; 180–200 s, accumulation potential; 50 mV versus Ag/AgCl, scan rate; 40 mV s⁻¹, supporting electrolyte; 0.1 M sodium acetate buffer at pH 6.5–7.0, and concentration of aluminon; 1×10⁻⁶ M. The linear range of uranium(VI) and zinc(II) were observed over the concentration range 2–33 and 30–120 ng ml⁻¹, respectively. The detection limit (S/N=3) are 0.2 ng ml⁻¹ (uranium) and 30 ng ml⁻¹ (zinc). A good reproducibility shows RSDs of 2.5–4.0% (n=10). The procedure offers high selectivity, with the presence of urea masking some metal ions.