Aqueous solvation free energies of ions and ion-water clusters based on an accurate value for the absolute aqueous solvation free energy of the proton

Thermochemical cycles that involve pKa, gas-phase acidities, aqueous solvation free energies of neutral species, and gas-phase clustering free energies have been used with the cluster pair approximation to determine the absolute aqueous solvation free energy of the proton. The best value obtained in this work is in good agreement with the value reported by Tissandier et al. (Tissandier, M. D.; Cowen, K. A.; Feng, W. Y.; Gundlach, E.; Cohen, M. J.; Earhart, A. D.; Coe, J. V. J. Phys. Chem. A 1998, 102, 7787), who applied the cluster pair approximation to a less diverse and smaller data set of ions. We agree with previous workers who advocated the value of -265.9 kcal/mol for the absolute aqueous solvation free energy of the proton. Considering the uncertainties associated with the experimental gas-phase free energies of ions that are required to use the cluster pair approximation as well as analyses of various subsets of data, we estimate an uncertainty for the absolute aqueous solvation free energy of the proton of no less than 2 kcal/mol. Using a value of -265.9 kcal/mol for the absolute aqueous solvation free energy of the proton, we expand and update our previous compilation of absolute aqueous solvation free energies; this new data set contains conventional and absolute aqueous solvation free energies for 121 unclustered ions (not including the proton) and 147 conventional and absolute aqueous solvation free energies for 51 clustered ions containing from 1 to 6 water molecules. When tested against the same set of ions that was recently used to develop the SM6 continuum solvation model, SM6 retains its previously determined high accuracy; indeed, in most cases the mean unsigned error improves when it is tested against the more accurate reference data.     

Absolute solvation free energy of Li+ and Na+ ions in dimethyl sulfoxide solution: a theoretical ab initio and cluster-continuum model study

The solvation of the lithium and sodium ions in dimethyl sulfoxide solution was theoretically investigated using ab initio calculations coupled with the hybrid cluster-continuum model, a quasichemical theory of solvation. We have investigated clusters of ions with up to five dimethyl sulfoxide (DMSO) molecules, and the bulk solvent was described by a dielectric continuum model. Our results show that the lithium and sodium ions have four and five DMSO molecules into the first coordination shell, and the calculated solvation free energies are -135.5 and -108.6 kcal mol(-1), respectively. These data suggest a solvation free energy value of -273.2 kcal mol(-1) for the proton in dimethyl sulfoxide solution, a value that is more negative than the present uncertain experimental value. This and previous studies on the solvation of ions in water solution indicate that the tetraphenylarsonium tetraphenylborate assumption is flawed and the absolute value of the free energy of transfer of ions from water to DMSO solution is higher than the present experimental values.     

Proton solvation in protic and aprotic solvents

Protonation pattern strongly affects the properties of molecular systems. To determine protonation equilibria, proton solvation free energy, which is a central quantity in solution chemistry, needs to be known. In this study, proton affinities (PAs), electrostatic energies of solvation, and pK_A values were computed in protic and aprotic solvents. The proton solvation energy in acetonitrile (MeCN), methanol (MeOH), water, and dimethyl sulfoxide (DMSO) was determined from computed and measured pK_A values for a specially selected set of organic compounds. pK_A values were computed with high accuracy using a combination of quantum chemical and electrostatic approaches. Quantum chemical density functional theory computations were performed evaluating PA in the gas‐phase. The electrostatic contributions of solvation were computed solving the Poisson equation. The computations yield proton solvation free energies with high accuracy, which are in MeCN, MeOH, water, and DMSO ?255.1, ?265.9, ?266.3, and ?266.4 kcal/mol, respectively, where the value for water is close to the consensus value of ?265.9 kcal/mol. The pK_A values of MeCN, MeOH, and DMSO in water correlates well with the corresponding proton solvation energies in these liquids, indicating that the solvated proton was attached to a single solvent molecule. © 2016 Wiley Periodicals, Inc.     

Anchor points for the unified Brønsted acidity scale: the rCCC model for the calculation of standard Gibbs energies of proton solvation in eleven representative liquid media

The COSMO cluster-continuum (CCC) solvation model is introduced for the calculation of standard Gibbs solvation energies of protons. The solvation sphere of the proton is divided into an inner proton-solvent cluster with covalent interactions and an outer solvation sphere that interacts electrostatically with the cluster. Thus, the solvation of the proton is divided into two steps that are calculated separately: 1) The interaction of the proton with one or more solvent molecules is calculated in the gas phase with high-level quantum-chemical methods (modified G3 method). 2) The Gibbs solvation energy of the proton-solvent cluster is calculated by using the conductor-like screening model (COSMO). For every solvent, the solvation of the proton in at least two (and up to 11) proton-solvent clusters was calculated. The resulting Gibbs solvation energies of the proton were weighted by using Boltzmann statistics. The model was evaluated for the calculation of Gibbs solvation energies by using experimental data of water, MeCN, and DMSO as a reference. Allowing structural relaxation of the proton-solvent clusters and the use of structurally relaxed Gibbs solvation energies improved the accordance with experimental data especially for larger clusters. This variation is denoted as the relaxed COSMO cluster-continuum (rCCC) model, for which we estimate a 1σ error bar of 10 kJ mol(-1) . Gibbs solvation energies of protons in the following representative solvents were calculated: Water, acetonitrile, sulfur dioxide, dimethyl sulfoxide, benzene, diethyl ether, methylene chloride, 1,2-dichloroethane, sulfuric acid, fluorosulfonic acid, and hydrogen fluoride. The obtained values are absolute chemical standard potentials of the proton (pH=0 in this solvent). They are used to anchor the individual solvent specific acidity (pH) scales to our recently introduced absolute acidity scale.     

Large-Sized Ammonia Clusters and Solvation Energies of the Proton in Ammonia

The absolute solvation energies (free energies and enthalpies) of the proton in ammonia are used to compute the pK_a of species embedded in ammonia. They are also used to compute the solvation energies of other ions in ammonia. Despite their importance, it is not possible to determine experimentally the solvation energies of the proton in a given solvent. We propose in this work a direct approach to compute the solvation energies of the proton in ammonia from large-sized neutral and protonated ammonia clusters. To undertake this investigation, we performed a geometry optimization of neutral and protonated ammonia 30-mer, 40-mer, and 50 mer to locate stable structures. These structures have been fully optimized at both APFD/6-31++g(d,p) and M06-2X/6-31++g(d,p) levels of theory. An infrared spectroscopic study of these structures has been provided to assess the reliability of our investigation. Using these structures, we have computed the absolute solvation free energy and the absolute solvation enthalpy of the proton in ammonia. It comes out that the absolute solvation free energy of the proton in ammonia is calculated to be −1192 kJ mol^–1, whereas the absolute solvation enthalpy is evaluated to be −1214 kJ mol^–1. © 2019 Wiley Periodicals, Inc.     

Calculation of the solvation free energy of neutral and ionic molecules in diverse solvents

The solvation free energy density (SFED) model was modified to extend its applicability and predictability. The parametrization process was performed with a large, diverse set of solvation free energies that included highly polar and ionic molecules. The mean absolute error for 1200 solvation free energies of the 379 neutral molecules in 9 organic solvents and water was 0.40 kcal/mol, and for 90 hydration free energies of ions was 1.7 kcal/mol. Overall, the calculated solvation free energies of a wide range of solute functional groups in diverse solvents were consistent with experimental data.     

Solvation of monovalent anions in acetonitrile and N,N-dimethylformamide: Parameterization of the IEF-PCM model

The present work reports the parameterization of the polarizable continuum model for predicting the free energies of solvation for monovalent anions in acetonitrile and N,N-dimethylformamide. The parameterization of the model for acetonitrile employed the experimental free energies of solvation for a set of 12 charged solutes, containing H, C, N, O, S, F, Cl, Br, and I atoms. For the N,N-dimethylformamide solutions, experimental solvation free energies for 11 monovalent anions were used. A mean absolute error of 0.7 kcal/mol in the solvation free energies has been achieved for the 12 anions in acetonitrile, whereas the mean absolute error for the 11 anions corresponds to 0.5 kcal/mol in N,N-dimethylformamide. These results indicate that the polarizable continuum model is a suitable methodology for the study of thermodynamic effects in solutions of monovalent anions in both solvents.     

Hydration free energies of monovalent ions in transferable intermolecular potential four point fluctuating charge water: an assessment of simulation methodology and force field performance and transferability

Hydration free energies of nonpolarizable monovalent atomic ions in transferable intermolecular potential four point fluctuating charge (TIP4P-FQ) are computed using several commonly employed ion-water force fields including two complete model sets recently developed for use with the simple water model with four sites and Drude polarizability and TIP4P water models. A simulation methodology is presented which incorporates a number of finite-system free energy corrections within the context of constant pressure molecular dynamics simulations employing the Ewald method and periodic boundary conditions. The agreement of the computed free energies and solvation structures with previously reported results for these models in finite droplet systems indicates good transferability of ion force fields from these water models to TIP4Q-FQ even when ion polarizability is neglected. To assess the performance of the ion models in TIP4P-FQ, we compare with consensus values for single-ion hydration free energies arising from recently improved cluster-pair estimates and a reevaluation of commonly cited, experimentally derived single-ion hydration free energies; we couple the observed consistency of these energies with a justification of the cluster-pair approximation in assigning single-ion hydration free energies to advocate the use of these consensus energies as a benchmark set in the parametrization of future ion force fields.     

水溶液中铵离子pKa值的理论计算

在HF/6-31+G*和B3LYP/6-31+G*水平上, 采用导体极化连续模型(CPCM)及UAKS孔穴计算了11种铵离子在水溶剂中的溶剂化自由能, 与实验值相比较, 平均误差和标准偏差分别为0.17, 12.04和0.96, 10.96 kJ/mol. 结合B3LYP/6-31+G*水平上的11种铵离子气相质子转移反应自由能, 得到了水溶剂中的绝对pKa值, 计算结果与实验数据吻合得很好, 相应的平均误差和标准偏差分别为0.05, 1.50和0.45, 1.40 pKa单位. 可见, 采用CPCM-UAKS模型能够较为精确地计算铵离子型化合物的绝对pKa值.     

Computation of pKa values of substituted aniline radical cations in dimethylsulfoxide solution

A newly developed computation strategy was used to calculate the absolute pKa values of 18 substituted aniline radical cations in dimethylsulfoxide (DMSO) solution with the error origin elucidated and deviation minimized. The B3LYP/6-311++G(2df,2p) method was applied and was found to be capable of reproducing the gas-phase proton-transfer free energies of substituted anilines with a precision of 0.83 kcal/mol. The IEF-PCM solvation model with gas-phase optimized structures was adopted in calculating the pKa values of the substituted neutral anilines in DMSO, regenerating the experimental results within a standard deviation of 0.4 pKa unit. When the IEF-PCM solvation model was applied to calculate the standard redox potentials of anilide anions, it showed that the computed values agreed well with experiment, but the redox potentials of substituted anilines were systematically overestimated by 0.304 eV. The cause of this deviation was found to be related to the inaccuracy of the calculated solvation free energies of aniline radical cations. By adjusting the size of the cavity in the IEF-PCM method, we derived a reliable procedure that can reproduce the experimental pKa values of aniline radical cations within 1.2 pKa units to those from experiment.     

One-electron reduction potential for oxygen- and sulfur-centered organic radicals in protic and aprotic solvents

We estimated one-electron reduction potentials of redox-active organic molecules for a spectrum of eight different functional groups (phenoxyl, p-benzoquinone, phenylthiyl, p-benzodithiyl, carboxyl, benzoyloxyl, carbthiyl, and benzoylthiyl) in protic (water) and aprotic (acetonitrile, N,N-dimethylacetamide) solvents. Electron affinities (EA) were evaluated in a vacuum with high level quantum chemical methods using Gaussian3-MP2 (G3MP2) and Becke 3 Lee, Yang, and Parr functional B3LYP with aug-cc-pVTZ basis set. To evaluate one-electron redox potentials, gas-phase free energies were combined with solvation energies obtained in a two-step computational approach. First, atomic partial charges were determined in a vacuum by the quantum chemical method B3LYP/6-31G(d,p). Second, solvation energies were determined, solving the Poisson equation with these atomic partial charges. Redox potentials computed this way, compared to experimental data for the 21 considered organic compounds in different solvents, yielded overall root-mean-square deviations of 0.058 and 0.131 V using G3MP2 or B3LYP to compute electronic energies, respectively, while B3LYP/6-31G(d,p) was used to compute solvation energies.     

Absolute hydration free energy scale for alkali and halide ions established from simulations with a polarizable force field

A polarizable potential function for the hydration of alkali and halide ions is developed on the basis of the recent SWM4-DP water model [Lamoureux, G.; MacKerell, A. D., Jr.; Roux, B. J. Chem. Phys. 2003, 119, 5185]. Induced polarization is incorporated using classical Drude oscillators that are treated as auxiliary dynamical degrees of freedom. The ions are represented as polarizable Lennard-Jones centers, whose parameters are optimized to reproduce the binding energies of gas-phase monohydrates and the hydration free energies in the bulk liquid. Systematic exploration of the parameters shows that the monohydrate binding energies can be consistent with a unique hydration free energy scale if the computed hydration free energies incorporate the contribution from the air/water interfacial electrostatic potential (-540 mV for SWM4-DP). The final model, which can satisfyingly reproduce both gas and bulk-phase properties, corresponds to an absolute scale in which the intrinsic hydration free energy of the proton is -247 kcal/mol.     

Accurate pK(a) calculations for carboxylic acids using complete basis set and Gaussian-n models combined with CPCM continuum solvation methods

Complete Basis Set and Gaussian-n methods were combined with CPCM continuum solvation methods to calculate pK(a) values for six carboxylic acids. An experimental value of -264.61 kcal/mol for the free energy of solvation of H(+), DeltaG(s)(H(+)), was combined with a value for G(gas)(H(+)) of -6.28 kcal/mol to calculate pK(a) values with Cycle 1. The Complete Basis Set gas-phase methods used to calculate gas-phase free energies are very accurate, with mean unsigned errors of 0.3 kcal/mol and standard deviations of 0.4 kcal/mol. The CPCM solvation calculations used to calculate condensed-phase free energies are slightly less accurate than the gas-phase models, and the best method has a mean unsigned error and standard deviation of 0.4 and 0.5 kcal/mol, respectively. The use of Cycle 1 and the Complete Basis Set models combined with the CPCM solvation methods yielded pK(a) values accurate to less than half a pK(a) unit.     

Thermochemistry of arylselanyl radicals and the pertinent ions in acetonitrile

Reduction and oxidation potentials of a series of parasubstituted phenylselanyl radicals, XC(6)H(4)Se(*), have been measured using photomodulated voltammetry in acetonitrile. The thermodynamic significance of these data was substantiated through a study of the oxidation process of the pertinent selenolates in linear sweep voltammetry. Both the reduction and the oxidation potentials correlate linearly with the Hammett substituent coefficients sigma and sigma(+) leading in the latter case to slopes, rho(+), of 2.5 and 3.8, respectively. Through comparison of these slopes with those published previously for the O- and S-centered analogues, it is revealed that the pi-interaction becomes progressively smaller as the size of the radical center increases in the order O, S, and Se. Solvation energies of the pertinent selenolates and selanylium ions have been extracted from thermochemical cycles incorporating the measured electrode potentials for XC(6)H(4)Se(*) as well as electron affinities and ionization potentials obtained from theoretical calculations at the B3LYP/6-31+G(d) level. The extracted data show the expected overall substituent dependency for both kinds of ions; that is, the absolute value of the solvation energy decreases as the charge becomes more delocalized. The data have also been compared with solvation energies computed using the polarizable continuum model (PCM). Interestingly, we find that, while the model seems to work well for selenolates, it underestimates the solvation of selanylium ions in acetonitrile by as much as 25 kcal mol(-)(1). These large deviations are ascribed to the fact that the PCM method does not take specific solvent effects into account as it treats the solvent as a continuum described solely by its dielectric constant. Gas-phase calculations show that the arylselanylium ions can coordinate covalently to one or two molecules of acetonitrile in strong Ritter-type adducts. When this strong interaction is included in the solvation energy calculations by means of a combined supermolecule and PCM approach, the experimental data are reproduced within a few kcal mol(-)(1). Although the energy difference of the singlet and triplet spin states of the arylselanylium ions is small for the gas-phase structures, the singlet cation is undoubtedly the dominating species in solution because the triplet cation lacks the ability to form covalent bonds.     

Computation of methodology-independent single-ion solvation properties from molecular simulations. IV. Optimized Lennard-Jones interaction parameter sets for the alkali and halide ions in water

The raw single-ion solvation free energies computed from atomistic (explicit-solvent) simulations are extremely sensitive to the boundary conditions and treatment of electrostatic interactions used during these simulations. However, as shown recently [M. A. Kastenholz and P. H. Hu?nenberger, J. Chem. Phys. 124, 224501 (2006); M. M. Reif and P. H. Hu?nenberger, J. Chem. Phys. 134, 144103 (2010)], the application of appropriate correction terms permits to obtain methodology-independent results. The corrected values are then exclusively characteristic of the underlying molecular model including in particular the ion-solvent van der Waals interaction parameters, determining the effective ion size and the magnitude of its dispersion interactions. In the present study, the comparison of calculated (corrected) hydration free energies with experimental data (along with the consideration of ionic polarizabilities) is used to calibrate new sets of ion-solvent van der Waals (Lennard-Jones) interaction parameters for the alkali (Li(+), Na(+), K(+), Rb(+), Cs(+)) and halide (F(-), Cl(-), Br(-), I(-)) ions along with either the SPC or the SPC/E water models. The experimental dataset is defined by conventional single-ion hydration free energies [Tissandier et al., J. Phys. Chem. A 102, 7787 (1998); Fawcett, J. Phys. Chem. B 103, 11181] along with three plausible choices for the (experimentally elusive) value of the absolute (intrinsic) hydration free energy of the proton, namely, ΔG(hyd)(?)[H(+)] = -1100, -1075 or -1050 kJ mol(-1), resulting in three sets L, M, and H for the SPC water model and three sets L(E), M(E), and H(E) for the SPC/E water model (alternative sets can easily be interpolated to intermediate ΔG(hyd)(?)[H(+)] values). The residual sensitivity of the calculated (corrected) hydration free energies on the volume-pressure boundary conditions and on the effective ionic radius entering into the calculation of the correction terms is also evaluated and found to be very limited. Ultimately, it is expected that comparison with other experimental ionic properties (e.g., derivative single-ion solvation properties, as well as data concerning ionic crystals, melts, solutions at finite concentrations, or nonaqueous solutions) will permit to validate one specific set and thus, the associated ΔG(hyd)(?)[H(+)] value (atomistic consistency assumption). Preliminary results (first-peak positions in the ion-water radial distribution functions, partial molar volumes of ionic salts in water, and structural properties of ionic crystals) support a value of ΔG(hyd)(?)[H(+)] close to -1100 kJ·mol(-1).     

Solvation effect of guest, supramolecular host, and host-guest compounds on the thermodynamic selectivity of calix(4)arene derivatives and soft metal cations

This paper reports thermodynamic data for the transfer of calixarene derivatives and their metal-ion complexes in dipolar aprotic solvents. These data are used to assess the effect of solvation of these compounds on the selective complexation shown by these macrocycles for soft metal cations in different media. Thus, solubilities and derived Gibbs energies of solution of 5,11,17,23-tetra-tert-butyl[25,27-bis(hydroxyl)-26,28-bis(ethylthioethoxy)]calix(4)arene, 1, and 5,11,17,23-tetra-tert-butyl-[25,27-bis(ethylenethanoate)-26,28-bis(ethylthioethoxy)]-calix(4)arene, 2, in various solvents at 298.15 K are reported. Solvation of these ligands in one medium relative to another is analyzed from their standard transfer Gibbs energies using acetonitrile as the reference solvent. These data are combined with transfer enthalpies (derived from standard solution enthalpies obtained calorimetrically) to calculate the corresponding entropies of transfer of these calix(4)arene derivatives from acetonitrile to methanol and N,N-dimethylformamide. As far as the metal-ion salts (silver and mercury) in their free and complex forms are concerned, standard solution enthalpies were determined in acetonitrile, methanol, and N,N-dimethylformamide. These data are used to derive their transfer enthalpies from one medium to another. It is concluded that the extent of complexation of these macrocycles with soft metal cations is controlled by not only the solvation changes that the free cation undergoes in moving from one medium to another but also those for the ligand and its complex cation in these solvents.     

Ab Initio Quantum Mechanical Study on the Origin of the pK(a) Differences of the Proton Sponges 1,8-Bis(dimethylamino)naphthalene, 1,8-Bis(dimethylamino)-2,7-dimethoxynaphthalene, 1,6-Dimethyl-1,6-diazacyclodecane, and 1,6-Diazabicyclo[4.4.4]tetradecane

Ab initio quantum mechanical calculations were used in studying the origin of the exceptionally high basicities of four diamines (13-16) with pK(a1) values ranging from 12.1 to 25. The computational approach involved the calculation of the gas-phase proton affinities of the molecules studied at the MP2/6-31G//HF/6-31G level and the solvation energies with the polarizable continuum model at the HF/6-31G level. The calculated gas-phase and aqueous-phase proton affinities of a structurally diverse series of amines were compared with the corresponding experimental gas-phase proton affinities and pK(a1) values. The calculated values were found to be in reasonable agreement with the experimental ones. The high basicities of the studied diamines were found to originate from the nitrogen lone-pair repulsion, solvation effects, and strong intramolecular hydrogen bonds. Each of these factors were found to be able to increase the pK(a1) values of the high-basicity diamines by 2-6 pK(a) units. The relative contributions of the factors varied between the compounds. The nitrogen lone-pair repulsion was estimated to be the most important factor in increasing the pK(a1) values. In addition, barriers for proton transfers between the nitrogens of selected diamines were calculated, and comparison was made between the barrier heights and the geometries of the diamines.     

Extension of a temperature-dependent aqueous solvation model to compounds containing nitrogen, fluorine, chlorine, bromine, and sulfur

Most methods for predicting free energies of solvation have been developed or validated exclusively for room temperature. Recently, we developed a model called SM6T for predicting aqueous solvation free energies as a function of temperature for solutes composed of C, H, or O, and here we present solvation model 8 with temperature dependence (SM8T) for predicting the temperature dependence of aqueous free energies of solvation for compounds containing H, C, N, O, F, S, Cl, and Br in the range 273-373 K. We also describe the database of experimental aqueous free energies of solvation used to parametrize the model. SM8T partitions the temperature dependence of the free energy of solvation into two components: the temperature dependence of the bulk electrostatic contribution to the free energy of solvation, which is computed using the generalized Born equation, and the temperature dependence of first-solvation-shell effects, which is modeled by terms proportional to the solvent-exposed surface areas of atoms in functional groups determined entirely by geometry. SM8T predicts the temperature dependence of aqueous free energies of solvation with a mean unsigned error of 0.08 kcal/mol over a database of 4403 measurements on 348 compounds at various temperatures. We also discuss the accuracy of SM8T for predicting the temperature dependence of aqueous free energies of solvation for ions and present free energies of solvation as a function of temperature for two sample ions.     

Force field evaluation for biomolecular simulation: free enthalpies of solvation of polar and apolar compounds in various solvents.

Recently, the GROMOS biomolecular force field parameter set 53A6--which has been parametrized to reproduce experimentally determined free enthalpies of hydration and solvation in cyclohexane of amino acid side-chain analogs--was presented. To investigate the transferability of the new parameter set, we calculated free enthalpies of solvation of a range of polar and apolar compounds in different solvents (methanol, dimethyl sulfoxide (DMSO), acetonitrile, and acetone) from molecular dynamics simulations using the GROMOS 53A6 force field. For methanol and DMSO, parameters were used that are available in the 53A6 parameter set. For acetonitrile, a recently developed model was taken and for acetone, two models available in literature were used. We found that trends in and values for the solvation free enthalpies are in satisfactory agreement with experiment, except for the solvation in acetone for which deviations from experiment can be explained in terms of the properties of the models used.     

Converging free energy estimates: MM-PB(GB)SA studies on the protein-protein complex Ras-Raf

Estimating protein-protein interaction energies is a very challenging task for current simulation protocols. Here, absolute binding free energies are reported for the complex H-Ras/C-Raf1 using the MM-PB(GB)SA approach, testing the internal consistency and model dependence of the results. Averaging gas-phase energies (MM), solvation free energies as determined by Generalized Born models (GB/SA), and entropic contributions calculated by normal mode analysis for snapshots obtained from 10 ns explicit-solvent molecular dynamics in general results in an overestimation of the binding affinity when a solvent-accessible surface area-dependent model is used to estimate the nonpolar solvation contribution. Applying the sum of a cavity solvation free energy and explicitly modeled solute-solvent van der Waals interaction energies instead provides less negative estimates for the nonpolar solvation contribution. When the polar contribution to the solvation free energy is determined by solving the Poisson-Boltzmann equation (PB) instead, the calculated binding affinity strongly depends on the atomic radii set chosen. For three GB models investigated, different absolute deviations from PB energies were found for the unbound proteins and the complex. As an alternative to normal-mode calculations, quasiharmonic analyses have been performed to estimate entropic contributions due to changes of solute flexibility upon binding. However, such entropy estimates do not converge after 10 ns of simulation time, indicating that sampling issues may limit the applicability of this approach. Finally, binding free energies estimated from snapshots of the unbound proteins extracted from the complex trajectory result in an underestimate of binding affinity. This points to the need to exercise caution in applying the computationally cheaper "one-trajectory-alternative" to systems where there may be significant changes in flexibility and structure due to binding. The best estimate for the binding free energy of Ras-Raf obtained in this study of -8.3 kcal mol(-1) is in good agreement with the experimental result of -9.6 kcal mol(-1), however, further probing the transferability of the applied protocol that led to this result is necessary.