Flame retardation and char formation mechanism of intumescent flame retarded polypropylene composites containing melamine phosphate and pentaerythritol phosphate

The flame retardation of polypropylene (PP) composites containing melamine phosphate (MP) and pentaerythritol phosphate (PEPA) was characterized by cone calorimeter. The formation mechanism of the char obtained from the combustion of the composites after cone calorimeter testing was studied by scanning electron microscopy (SEM), Fourier transform infrared spectra (FTIR), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD) and Raman diffusion. Results demonstrated that the PP composite containing MP and PEPA showed good flame retardancy. It had been found that the intumescent char could be principally divided into three parts, i.e. outer, middle and inner char layer, according to their different structures and components.     

Catalytic action of phospho-tungstic acid in the synthesis of melamine salts of pentaerythritol phosphate and their synergistic effects in flame retarded polypropylene

A solid acid, phospho-tungstic acid (PTA), has been used to catalyze the pentaerythritol-melamine phosphate (PER-MP) reaction to synthesize intumescent flame retardant, melamine salt of pentaerythritol phosphate (MPP) used in flame retardant polypropylene (PP). This novel and environmentally friendly synthesis technology well solves the problems of conventional preparation methods. PTA plays a double-role: on one hand, it remarkably enhances the conversion of the above reaction and decreases the reaction temperature; on the other hand, it acts as an effective synergist with MPP and greatly improves the flame retardancy; accordingly, no additional process is needed to remove PTA after the reaction, and the products of the catalyzed reaction were directly incorporated with PP to prepare high-performance flame retardant materials. The catalytic and synergistic effects of PTA, as well as the flame retardancy and mechanical properties of the corresponding flame retardant PP were investigated.     

Thermal degradation study of intumescent flame retardants by TG and FTIR: Melamine phosphate and its mixture with pentaerythritol

Thermal degradation of intumescent flame retardants, such as melamine phosphate (MP) and the mixture of MP and pentaerythritol (PER) was studied by TG, FTIR gas analyser (G-FTIR), and FTIR spectrometry. The results indicate that the degradation behavior of MP or PER itself is different from the one of them in the mixture. The volatile degradation products of MP contain mainly NH₃, and H₂O, as well as small amounts of melamine (MEL), whereas no MEL is found in the degradation of the mixture of MP and PER. Moreover, degradation products of PER are composed of a lot of volatile combustibles such as formaldehydes, alcohols, and C–H compounds except for H₂O. The mixture of MP and PER, however, produces much less volatile combustibles during its degradation leading to the production of more charring materials.     

Synergistic effect of nanoflaky manganese phosphate on thermal degradation and flame retardant properties of intumescent flame retardant polypropylene system

Nanoflaky manganese phosphate (NMP) was synthesized from manganese nitrate and trisodium phosphate dodecahydrate, and used as a synergistic agent on the flame retardancy of polypropylene (PP)/intumescent flame retardant (IFR) system. The thermogravimetric analysis (TGA), real time Fourier-transform infrared (RTFTIR) spectroscopy measurements, cone calorimeter (CONE) and microscale combustion calorimeter (MCC) were used to evaluate the synergistic effects of NMP on PP/IFR system. When IFR + NMP was fixed at 20 wt% in flame retardant PP system, the TGA tests showed that NMP could enhance the thermal stability of PP/IFR system at initial temperature from about room temperature to 440 °C and effectively increase the char residue formation. The RTFTIR results revealed that NMP could clearly change the decomposition behavior of PP in PP/IFR system, which promotes decomposition at the initial temperature from about room temperature to 260 °C and forms more effective barrier layer to protect PP from decomposing at high temperature from about 260 °C to 500 °C. The CONE tests indicated that the addition of NMP in PP/IFR system not only reduced the peak heat release rate (HRR), but also prolonged the ignition time. The MCC results revealed that PP/IFR/NMP system generated less combustion heat over the course of heating than that of PP/IFR system. And scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) were used to explore the char residues of the PP/IFR systems with and without NMP.     

Effect of a novel charring-foaming agent on flame retardancy and thermal degradation of intumescent flame retardant polypropylene

A new triazine polymer was synthesized by using cyanuric chloride, ethanolamine and ethylenediamine as raw materials. It is used both as a charring agent and as a foaming agent in intumescent flame retardants, designated as charring-foaming agent (CFA). Effect of CFA on flame retardancy, thermal degradation and mechanical properties of intumescent flame retardant polypropylene (PP) system (IFR-PP system) has been investigated. The results demonstrated that the intumescent flame retardant (IFR) consisting of CFA, APP and Zeolite 4A is very effective in flame retardancy of PP. It was found that when the weight ratio of CFA to APP is 1:2, that is, the components of the IFR are 64 wt% APP, 32 wt% CFA and 4 wt% Zeolite 4A, the IFR presents the most effective flame retardancy in PP systems. LOI value of IFR-PP reaches 37.0, when the IFR loading is 25 wt% in PP. It was also found that when the IFR loading is only 18 wt% in PP, the flame retardancy of IFR-PP can still pass V-0 rating, and its LOI value reaches 30.2. TGA data obtained in pure nitrogen demonstrated that CFA has a good ability of char formation itself, and CFA shows a high initial temperature of the thermal degradation. The char residue of CFA can reach 35.7 wt% at 700 °C. APP could effectively promote the char formation of the APP-CFA system. The char residue reaches 39.7 wt% at 700 °C, while it is 19.5% based on calculation. The IFR can change the thermal degradation behaviour of PP, enhance T_max of the decomposition peak of PP, and promote PP to form char, based upon the results of the calculation and the experiment. This is attributed to the fact that endothermic reactions took place in IFR charring process and the char layer formed by IFR prevented heat from transferring into inside of IFR-PP system. TGA results further explained the effective flame retardancy of the IFR containing CFA.     

Synergistic effect of boron containing substances on flame retardancy and thermal stability of intumescent polypropylene composites

The synergistic effect of four different boron containing substances, zinc borate (ZnB), borophosphate (BPO₄), boron silicon containing preceramic oligomer (BSi) and lanthanum borate (LaB), were studied to improve the flame retardancy of a polypropylene (PP) intumescent system composed of ammonium polyphosphate (APP) and pentaerythritol (PER). The flame retardancy of PP composites was investigated by limiting oxygen index (LOI), UL-94 standard, thermogravimetric analysis (TGA) and cone calorimeter tests. The addition of 20 wt% intumescent flame retardant (IFR) improves the flame retardancy by increasing the char formation. According to LOI and UL-94 test, boron compounds show their highest synergistic effect at 1 wt% loading. BPO₄ containing composite shows the highest LOI (30), lowest maximum heat release rate (HRR) and lowest total heat release rate (THR) value. Although the char yield increases as the amount of boron compounds increases, the flame retarding effect decreases. Cone calorimeter and TGA data indicate that the boron compounds are likely to show their synergistic effect by reinforcing the integrity of char which improves its barrier effect rather than increasing the char yield.     

Effects of organo-clay and sodium dodecyl sulfonate intercalated layered double hydroxide on thermal and flame behaviour of intumescent flame retarded polypropylene

The thermal and flame performances of intumescent flame retarded polypropylene (PP/IFR) composites with organically modified clay or sodium dodecyl sulfonate intercalated layered double hydroxide (SDS-LDH) were studied. The organo-clay particles were partially exfoliated in the PP matrix, while intercalation and aggregation was obtained for SDS-LDH. Incorporation of SDS-LDH improved the thermal stability and flame retardancy of the intumescent flame retarded PP composite in the early stage of heating and combustion; while the effects of organo-clay came into play in the middle-later stage. Differences in degradation pathway of clay and LDH were responsible for the above phenomenon which bore important implication for the barrier mechanism. The introduction of organo-clay into PP/IFR not only increased the char residue, but also formed compact and folded morphology of char residue which provided more effective protect for underlying materials against heat and oxygen relative to LDH, thus improved the flame retardancy of intumescent flame retarded PP samples more efficiently.     

Reaction of melamine phosphate with pentaerythritol and its products for flame retardation of polypropylene

Due to being halogen‐free, non‐toxic, non‐erosive and environmentally friendly, melamine‐based flame retardants are attracting more and more attention. As a melamine‐based intumescent flame retardant, in this study the melamine salt of pentaerythritol phosphate (MPP) was prepared from melamine phosphate (MP) and pentaerythritol (PER). The reaction of MP with PER was then systematically investigated. The reaction product MPP was utilized to flame‐retard polypropylene (PP). FT‐IR, TGA and DSC were used to characterize MPP and also to investigate the reaction of MP and PER in depth. The experimental results show that MPP has good thermal stability and matched decomposition temperature with that of PP, making it suitable for flame retarding of PP. Also, MPP is melting‐blendable due to its softening during the heating process. The structure of MPP at a MP:PER molar ratio of 2.0 was confirmed as the same to that of the product synthesized from phosphorus oxychloride, pentaerythritol and melamine. The reaction of MP with PER was greatly influenced by the MP:PER proportion, reaction temperature and reaction time, rather than the physical state of PER, and the reaction mechanism of MP with PER was proposed. The prepared flame‐retarded polypropylene composite with 35 wt% intumescent flame‐retardant MPP has a flame retarding level of 3.2 mm UL 94 V‐0, tensile strength 27.0 MPa, Young's modulus 2442 MPa and Izod notched impact strength 3.8 kJ/m². Copyright © 2007 John Wiley & Sons, Ltd.     

Synergistic effects of aluminum hypophosphite on intumescent flame retardant polypropylene system

The effects of aluminum hypophosphite(AHP) as a synergistic agent on the flame retardancy and thermal degradation behavior of intumescent flame retardant polypropylene composites(PP/IFR) containing ammonium polyphosphate(APP) and triazine charring-foaming agent(CFA) were investigated by limiting oxygen index(LOI), UL-94 measurement, thermogravimetric analysis(TGA), cone calorimeter test(CONE), scanning electron microscopy(SEM) and X-ray photoelectron spectroscopy(XPS). It was found that the combination of IFR with AHP exhibited an evident synergistic effect and enhanced the flame retardant efficiency for PP matrix. The specimens with the thickness of 0.8 mm can pass UL-94 V-0 rating and the LOI value reaches 33.5% based on the total loading of flame retardant of 24 wt%, and the optimum mass fraction of AHP/IFR is 1:6. The TGA data revealed that AHP could change the degradation behavior of IFR and PP/IFR system, enhance the thermal stability of the IFR and PP/IFR systems at high temperatures and promote the char residue formation. The CONE results revealed that IFR/AHP blends can efficiently reduce the combustion parameters of PP, such as heat release rate(HRR), total heat release(THR), smoke production rate(SPR) and so on. The morphological structures of char residue demonstrated that AHP is of benefit to the formation of a more compact and homogeneous char layer on the materials surface during burning. The analysis of XPS indicates that AHP may promote the formation of sufficient char on the materials surface and improve the flame retardant properties.     

Synthesis and thermal stability of a novel phosphorus-nitrogen containing intumescent flame retardant

A novel phosphorus-nitrogen containing intumescent flame retardant （P-N IFR） was prepared via the reaction of dichlor-opentate with N-methylaniline. The structure of the product was confirmed by ^1H NMR, ^31p NMR, MS and IR. TGA analysis showed it has effective thermal stability.     

Thermal decomposition study of intumescent additives: Pentaerythritol phosphate and its blend with melamine phosphate

Thermal decomposition of pentaerythritol phosphate (PEPA) and its blend (PEPAMP) with melamine phosphate were studied by TG, DSC, TOF MS, and FTIR of volatile and solid decomposition products. Both PEPA and PEPAMP produce intumescent char on heating, however that of PEPAMP is less stable to thermo-oxidative decomposition. The main decomposition pathway of PEPA is liberation of phosphoric acid followed by formation of a foamed carbonized residue. In the mixture of PEPAMP, reaction between the components occurs, which strongly reduces the heat release peaks of PEPA. In addition, condensates of melamine and their products of hydrolysis are formed. The hydrolysis reaction causes a low-temperature decomposition of the melamine ring, which results in the formation of urea, carbon dioxide and ammonia. The thermal decomposition of PEPA and PEPAMP is discussed.     

Thermal degradation mechanism of flame retarded epoxy resins with a DOPO-substitued organophosphorus oligomer by TG-FTIR and DP-MS

A novel phosphorus-containing oligomeric flame retardant, poly(DOPO substituted hydroxyphenyl methanol pentaerythritol diphosphonate) (PDPDP) was synthesized and applied to flame retarded epoxy resins. The thermal degradation behaviors of flame retarded epoxy composites with PDPDP were investigated by thermogravimetric analysis (TGA), thermogravimetric analysis/infrared spectrometry (TG-FTIR) and direct pyrolysis-mass spectrometry (DP-MS) techniques. The identification of pyrolysis fragment ions provided insight into the flame retardant mechanism. The results showed that the mass loss rate of the EP/PDPDP composites was clearly lower than pure EP when the temperature was higher than 300 °C in air or nitrogen atmosphere. The results also suggested that the main decomposition fragment ions of the EP/PDPDP composite were H₂O, CO₂, CO, benzene, and phenol. The incorporation of PDPDP can reduce the release of combustible gas and induce the formation of char layer, hence the fire potential hazard was reduced.     

SYNERGISTIC EFFECT OF Cu-ZSM-5 ZEOLITE ON FLAME RETARDED PP BY MELAMINE SALT OF DIPENTAERYTHRIOL PHOSPHATE

A novel intumnescent flame melamine salt of dipentaerythriol phosphate (MDP),was prepared from dipentaerythritol (DPE) polyphosphoric acid,and melamine.The flammability,combustion behavior,and thermal degradation and stability of PP-MDP were characterized.When MDP loading was 20 wt%,LOI values of the composites reached up to 27%,and UL94 rating,V-2.PP-MDP containing 1 wt% Cu-ZSM-5 presented the highest LOI value of 30.5% and UL94 rating,V-0,and released lest heat during cone test.TG data showed that the ...     

Thermal oxidative degradation kinetics of flame-retarded polypropylene with intumescent flame-retardant master batches in situ prepared in twin-screw extruder

The thermal oxidative degradation kinetics of pure PP and the flame-retarded (FR) PP materials with intumescent flame-retardant (IFR) master batches in situ prepared in twin-screw extruder were investigated using Kissinger method, Flynn-Wall-Ozawa method and Coats-Redfern method. The results showed that the activation energy order of PP and FR PP samples with different blowing agent/char former ratios obtained by Kissinger method agrees well with that obtained by Coats-Redfern one, which well illustrates the relationship between the composition of IFRs and their flame-retardancy, i.e. FR material with richer carbonization agent has higher activation energy for thermal oxidative degradation, hence leading to a better flame-retardancy. For Flynn-Wall-Ozawa method, due to its adoption of Doyle approximation, the obtained activation energy and its order of samples are very different from those of both Kissinger and Coats-Redfern methods. Criado method was finally used to determine the degradation reaction mechanism of various samples.     

Thermal degradation analysis and XRD characterisation of fibre-forming synthetic polypropylene containing nanoclay

Flammability of synthetic fibres is significantly worse than that of bulk polymers because of the high surface area to volume ratio and the low tolerance to high filler loadings in the fibre production process. Introducing nanocomposite structures has the potential to enhance the char formation at relatively low loadings of nanoparticulate fillers and hence can reduce the flammability of synthetic polymers and fibres.This paper reports thermal degradation analysis results in conjunction with TG analysis under different atmospheres and further studies of X-ray diffraction characterisation of fibre-forming polypropylene containing selected dispersed nanoclays.The concentrations of hydrocarbons, carbon monoxide and carbon dioxide released during the TG analysis have been monitored and analysed by using a combined electrochemical infrared analyser. The intensity changes of the crystallinity peaks and nanoclay peaks in the polymer and composites are discussed.     

Combustion properties and thermal degradation behavior of polylactide with an effective intumescent flame retardant

An intumescent flame retardant spirocyclic pentaerythritol bisphosphorate disphosphoryl melamine (SPDPM) has been synthesized and its structure was characterized by Fourier transformed infrared spectrometry (FTIR), ¹H and ³¹P nuclear magnetic resonances (NMR). A series of polylactide (PLA)-based flame retardant composites containing SPDPM were prepared by melt blending method. The combustion properties of PLA/SPDPM composites were evaluated through UL-94, limiting oxygen index (LOI) tests and microscale combustion calorimetry (MCC) experiments. It is found that SPDPM integrating acid, char and gas sources significantly improved the flame retardancy and anti-dripping performance of PLA. When 25 wt% flame retardant was added, the composites achieved UL-94 V0, and the LOI value was increased to 38. Thermogravimetric analysis (TGA) showed that the weight loss rate of PLA was decreased by introduction of SPDPM. In addition, the thermal degradation process and possible flame retardant mechanism of PLA composites with SPDPM were analyzed by in situ FTIR.     

Effect of boron containing materials on flammability and thermal degradation of polyamide‐6 composites containing melamine cyanurate

Three different boron containing materials, zinc borate (ZnB), borophosphate (BPO₄), and boron and silicon containing oligomer (BSi), were used to improve the flame retardancy of melamine cyanurate (MC) in a polyamide‐6 (PA‐6) matrix. The combustion and thermal degradation characteristics were investigated using limiting oxygen index (LOI), UL‐94 standard, thermogravimetric analysis‐Fourier transform infrared spectroscopy (TGA‐FTIR), differential scanning calorimeter (DSC), and scanning electron microscopy (SEM). All the three boron compounds showed no synergistic effect with MC, and only BPO₄ at high loadings showed comparable LOI values by increasing the dripping rate. For ZnB and BSi glassy film and char formation decreases the dripping rate and sublimation of melamine and give rise to low LOI. According to TGA‐FTIR results, addition of boron compounds does not alter the gaseous product distribution of both MC and PA‐6. The addition of boron compounds affects flame retardancy through physical means. It was noted from the TGA data that boron compounds reduced the decomposition temperature of both MC and PA‐6, also affecting the flame retardancy negatively by premature degradation of MC at low temperatures. Copyright © 2009 John Wiley & Sons, Ltd.     

Poly(vinyl alcohol)/melamine phosphate composites prepared through thermal processing: thermal stability and flame retardancy

Poly(vinyl alcohol)/melamine phosphate composites (PVA/MP) as a novel halogen‐free, flame‐retardant foam matrix were prepared through thermal processing, and then their thermal stability and flame retardancy were investigated by thermo‐gravimetric analysis, micro‐scale combustion calorimeter, cone calorimeter, vertical burning test, and limiting oxygen index (LOI) test. It was found that the thermal stability and combustion properties of the PVA/MP composites could be influenced by the addition of MP. Compared with the control PVA sample (B‐PVA), in the PVA/MP (75/25) composites, the temperature at 5% mass loss (T_5%) decreased about 10°C, the residual chars at 600°C increased by nearly 27%, the temperature at the maximum peak heat release rate (T_P) shifted from 292°C to 452°C, and the total heat released and the heat release capacity (HRC) decreased by 28% and 14%, respectively. Moreover, the PVA/MP composites could reach LOI value up to 35% and UL94 classification V‐0, showing good flame retardancy. At the same time, both Fourier transform infrared and X‐ray photoelectron spectroscopy spectra of the residual chars from the PVA/MP composites demonstrated that the catalytic effect of MP on the dehydration and decarboxylation reactions of PVA, and the chemical reactivity of MP during the chars‐forming reactions could be used to account for the changed thermal stability and flame retardancy of the PVA/MP composites. Copyright © 2012 John Wiley & Sons, Ltd.     

Simultaneous improvement in the flame retardancy and water resistance of PP/APP through coating UV-curable pentaerythritol triacrylate onto APP

To improve the flame-retardant efficiency and water resistance of ammonium polyphosphate(APP), the UV-curable pentaerythritol triacrylate(PETA) was used to microencapsulate APP via the UV curing polymerization method. The prepared PETA-microencapsulated APP(PETA-APP) was characterized by Fourier transform infrared spectroscopy(FTIR), scanning electron microscopy(SEM), and thermogravimetric(TG) analysis. PETA-APP was used as intumescent flame retardant(IFR) alone to flame retard polypropylene(PP). The water resistance of PP/PETA-APP composites was investigated, and the effect of PETA on the combustion behaviors of PP/APP composites was studied through limiting oxygen index(LOI), vertical burning test(UL-94) and cone calorimeter(CC) test, respectively. With 40 wt% of PETA-APP, the PP/PETA-APP system could achieve a LOI value of 30.0% and UL-94 V-0 rating after treatment in hot water for 168 h, while the LOI value of the system containing 40 wt% uncoated APP was only 19.2%, and it failed to pass the UL-94 rating. CC test results showed that the heat release rate(HRR), mass loss rate(MLR) and smoke production rate(SPR) of PP/PETAAPP system decreased significantly compared with PP/APP system, especially the peak of HRR was decreased by 51.4%. The mechanism for the improvement of flame reatardancy for PP/PETA-APP composites was discussed based on FTIR and X-ray photoelectron spectroscopy(XPS) tests. All these results illustrated that simultaneous improvement of flame retardancy and water resistance for PP/APP was achieved through coating UV-curable PETA onto APP.     

Flammability and thermal degradation of epoxy acrylate modified with phosphorus‐containing compounds

A series of UV‐curable flame retardant resins was obtained using epoxy acrylate (EA) modified with 1‐oxo‐4‐hydroxymethyl‐2,6,7‐trioxa‐1‐phosphabicyclo[2.2.2]octane (PEPA). The flammability was characterized by limiting the oxygen index (LOI), UL 94 and cone calorimeter, and the thermal degradation of the flame retardant resins was studied using thermogravimetric analysis (TGA) and real time Fourier transform infrared (RTFTIR). The results indicated that the flame retardant efficiency increases and the heat release rate (HRR) decreases greatly with the content of PEPA. The TG data showed that the modified epoxy acrylates (MEAs) have lower initial decomposition temperatures and higher char residues than pure EA. The RTFTIR study indicates that the MEAs have lower thermal oxidative stability than the pure EA. Copyright © 2009 John Wiley & Sons, Ltd.