Theoretical and experimental analysis of longitudinal wave propagation in cylindrical viscoelastic rods

Wave propagation in viscoelastic rods is encountered in many applications including studies of impact and fracture under high strain rates and characterization of the dynamic behavior of viscoelastic materials. For viscoelastic materials, both material and geometric dispersion are possible when the diameter of the rod is of the same order as the wavelength. In this work, we simplify the Pochhammer frequency equation for low and intermediate loss viscoelastic materials and formulate corrections for geometric dispersion for both the phase velocity and attenuation. The formulation is then experimentally verified with measurements of the phase velocity and attenuation in commercial polymethylmethacrylate rods that are 12 and in diameter. Without correcting for geometric dispersion, the usable frequency range for determining the phase velocity and attenuation for the rod is about , and about for the rod. Using the correction procedure developed here, it was possible to accurately determine the phase velocity and attenuation up to frequencies exceeding for the rod and for the rod. These corrections are applicable to many polymers and other viscoelastic materials. From thereon, the viscoelastic properties of the material can be determined over a wide range of frequencies.     

Plasticity of metal wires in torsion: Molecular dynamics and dislocation dynamics simulations

The orientation dependent plasticity in metal nanowires is investigated using molecular dynamics and dislocation dynamics simulations. Molecular dynamics simulations show that the orientation of single crystal metal wires controls the mechanisms of plastic deformation. For wires oriented along , dislocations nucleate along the axis of the wire, making the deformation homogeneous. These wires also maintain most of their strength after yield. In contrast, wires oriented along and directions deform through the formation of twist boundaries and tend not to recover when high angle twist boundaries are formed. The stability of the dislocation structures observed in molecular dynamics simulations are investigated using analytical and dislocation dynamics models.     

Discrete dislocation plasticity analysis of the wedge indentation of films

The plane strain indentation of single crystal films on a rigid substrate by a rigid wedge indenter is analyzed using discrete dislocation plasticity. The crystals have three slip systems at ±35.3^° and 90^° with respect to the indentation direction. The analyses are carried out for three values of the film thickness, 2, 10 and , and with the dislocations all of edge character modeled as line singularities in a linear elastic material. The lattice resistance to dislocation motion, dislocation nucleation, dislocation interaction with obstacles and dislocation annihilation are incorporated through a set of constitutive rules. Over the range of indentation depths considered, the indentation pressure for the 10 and thick films decreases with increasing contact size and attains a contact size-independent value for contact lengths . On the other hand, for the films, the indentation pressure first decreases with increasing contact size and subsequently increases as the plastic zone reaches the rigid substrate. For the 10 and thick films sink-in occurs around the indenter, while pile-up occurs in the film when the plastic zone reaches the substrate. Comparisons are made with predictions obtained from other formulations: (i) the contact size-independent indentation pressure is compared with that given by continuum crystal plasticity; (ii) the scaling of the indentation pressure with indentation depth is compared with the relation proposed by Nix and Gao [1998. Indentation size effects in crystalline materials: a law for strain gradient plasticity. J. Mech. Phys. Solids 43, 411-423]; and (iii) the computed contact area is compared with that obtained from the estimation procedure of Oliver and Pharr [1992. An improved technique for determining hardness and elastic-modulus using load and displacement sensing indentation experiments, J. Mater. Res. 7, 1564-1583].     

A large deformation theory for rate-dependent elastic–plastic materials with combined isotropic and kinematic hardening

We have developed a large deformation viscoplasticity theory with combined isotropic and kinematic hardening based on the dual decompositions F=F^eF^p [Kröner, E., 1960. Allgemeine kontinuumstheorie der versetzungen und eigenspannungen. Archive for Rational Mechanics and Analysis 4, 273–334] and [Lion, A., 2000. Constitutive modelling in finite thermoviscoplasticity: a physical approach based on nonlinear rheological models. International Journal of Plasticity 16, 469–494]. The elastic distortion F^e contributes to a standard elastic free-energy ψ^(e), while , the energetic part of F^p, contributes to a defect energy ψ^(p) – these two additive contributions to the total free energy in turn lead to the standard Cauchy stress and a back-stress. Since F^e=FF^p-1 and , the evolution of the Cauchy stress and the back-stress in a deformation-driven problem is governed by evolution equations for F^p and – the two flow rules of the theory.We have also developed a simple, stable, semi-implicit time-integration procedure for the constitutive theory for implementation in displacement-based finite element programs. The procedure that we develop is “simple” in the sense that it only involves the solution of one non-linear equation, rather than a system of non-linear equations. We show that our time-integration procedure is stable for relatively large time steps, is first-order accurate, and is objective.     

Free- and forced-convection film condensation from a horizontal elliptic tube with a vertical plate and horizontal tube as special cases

A simple mathematical model is developed for the study of the mixed-convection film condensation with downward flowing vapors onto a horizontal elliptic tube. Analytical analysis for both the local condensate film thickness and heat transfer characteristics under simultaneous effects of interfacial vapor shear and pressure gradient has been performed by adopting a unified geometry parameter, eccentricity e. The present results for two limit cases, e = 0 (circular tube) and e = 1.0 (vertical plate) are in an excellent agreement with the earlier works. For very slow vapor flow, the present result for dimensionless mean heat transfer coefficient reduces to the same form as in the earlier works, , whose value is 0.728 for e = 0 and 0.943 for e = 1.0. As for very fast vapor flow, the dimensionless mean heat transfer coefficient, increase with increasing eccentricity under the effects of pressure gradient caused by potential flow and surface tension.     

Global existence and uniqueness of solutions for the equations of third grade fluids

We consider the equations governing the motion of third grade fluids in . We show global existence of solutions without any smallness assumption, by assuming only that the initial velocity belongs to the Sobolev space H². The uniqueness of such solutions is also proven in dimension two.     

Regularity criteria for the 3D MHD equations in terms of the pressure

In this paper we consider the regularity criteria for weak solutions to the 3D MHD equations. It is proved that under the condition b being in the Serrin's regularity class, if the pressure p belongs to L^α,γ with or the gradient field of pressure p belongs to L^α,γ with on [0,T], then the solution remains smooth on [0,T].     

Collision operator including large-angle scattering for moderately coupled plasma

A new approach has been developed to treat the large-angle as well as the small-angle binary collisions in high temperature and high density plasmas when the test particle distribution function f_α is even function about the test velocity and the relations of the mass and the velocity between the test particles and the field particles are satisfied with m_αm_β (such as electron–ion collision or Lorentz-gas model) and . With the approach, the Boltzmann collision operator is derived to be suitable for the plasma considered as weakly coupled (Coulomb logarithm ) and moderately coupled , i.e., for the electron–ion coupling constant Γ_ei<0.1. The modified collision operator has a direct and practical connection to the Rosenbluth potentials, the new reduced electron–ion collision operator differs from the original Fokker–Planck operator for Coulomb collisions by terms of order . Moreover, some calculations of relaxation rate and transport properties are given for new reduced electron–ion collision operator that shows corrections.     

Geometrical properties of the vorticity vector derived using large-eddy simulation

In this paper, the geometrical properties of the resolved vorticity vector derived from large-eddy simulation are investigated using a statistical method. Numerical tests have been performed based on a turbulent Couette channel flow using three different dynamic linear and nonlinear subgrid-scale stress models. The geometrical properties of have a significant impact on various physical quantities and processes of the flow. To demonstrate, we examined helicity and helical structure, the attitude of with respect to the eigenframes of the resolved strain rate tensor and negative subgrid-scale stress tensor -τ_ij, enstrophy generation, and local vortex stretching and compression. It is observed that the presence of the wall has a strong anisotropic influence on the alignment patterns between and the eigenvectors of , and between and the resolved vortex stretching vector. Some interesting wall-limiting geometrical alignment patterns and probability density distributions in the form of Dirac delta functions associated with these alignment patterns are reported. To quantify the subgrid-scale modelling effects, the attitude of with respect to the eigenframe of -τ_ij is studied, and the geometrical alignment between and the Euler axis is also investigated. The Euler axis and angle for describing the relative rotation between the eigenframes of -τ_ij and are natural invariants of the rotation matrix, and are found to be effective for characterizing a subgrid-scale stress model and for quantifying the associated subgrid-scale modelling effects on the geometrical properties of .     

Integration approach of the Couette inverse problem of powder type self-compacting concrete in a wide-gap concentric cylinder rheometer

For powder type self-compacting concrete (SCC) mixes, commonly used in Belgium, a shear thickening (Herschel–Bulkley) flow behaviour of the fresh mixes is quite often observed.A longstanding problem in rheometry is the so-called “Couette inverse problem”, where one tries to derive the flow curve from the torque measurements T(N) in a (wide-gap) concentric cylinder (Couette) rheometer, with T the torque registered at the inner, stationary cylinder and N the rotational velocity of the outer, rotating, cylinder.In this paper, the Couette inverse problem is approached by means of the integration method in order to convert T(N) into for a wide-gap (R_o/R_i = 1.45) concentric cylinder rheometer. The approach consists in the decoupling of the flow resistance and the power-law flow behaviour after exceeding the flow resistance. The integration approach is validated by experimental verification with different powder type SCC mixtures. By means of illustration, the results of one limestone powder type SCC mixture with different superplasticizer contents are shown in this paper.     

Limit analysis of multi-layered plates. Part I: The homogenized Love-Kirchhoff model

The purpose of this paper is to determine , the overall homogenized Love-Kirchhoff strength domain of a rigid perfectly plastic multi-layered plate, and to study the relationship between the 3D and the homogenized Love-Kirchhoff plate limit analysis problems. In the Love-Kirchhoff model, the generalized stresses are the in-plane (membrane) and the out-of-plane (flexural) stress field resultants. The homogenization method proposed by Bourgeois [1997. Modélisation numérique des panneaux structuraux légers. Ph.D. Thesis, University Aix-Marseille] and Sab [2003. Yield design of thin periodic plates by a homogenization technique and an application to masonry wall. C. R. Méc. 331, 641-646] for in-plane periodic rigid perfectly plastic plates is justified using the asymptotic expansion method. For laminated plates, an explicit parametric representation of the yield surface is given thanks to the π-function (the plastic dissipation power density function) that describes the local strength domain at each point of the plate. This representation also provides a localization method for the determination of the 3D stress components corresponding to every generalized stress belonging to . For a laminated plate described with a yield function of the form , where σ^u is a positive even function of the out-of-plane coordinate x₃ and is a convex function of the local stress σ, two effective constants and a normalization procedure are introduced. A symmetric sandwich plate consisting of two Von-Mises materials ( in the skins and in the core) is studied. It is found that, for small enough contrast ratios (), the normalized strength domain is close to the one corresponding to a homogeneous Von-Mises plate [Ilyushin, A.-A., 1956. Plasticité. Eyrolles, Paris].     

Dynamic fracture of a kane-mindlin plate

We study dynamic crack problems for an elastic plate by using Kane-Mindlin's kinematic assumptions. The general solutions of the Laplace transformed displacements and stresses are first derived. Path independent integrals for stationary cracks subjected to transient loads and steadily growing cracks are deduced. For a stationary crack in a very thin plate subjected to impact loads, the crack tip dynamic stress intensity factor (DSIF), K₁(t), is related to the far field plane stress one, K₁⁰(t), by where ν is Poisson's ratio. For a crack steadily growing with speed V, the crack tip DSIF, K₁(V), is given by where K₁⁰(V) is the plane stress DSIF and A(V) and B(V) are known functions of V. These results are applied to compute the DSIF for a semi-infinite stationary crack in an unbounded plate subjected to impact pressure on the crack faces. The results of DSIF for a finite crack in an infinite plate under uniform impact pressure on the crack surfaces show that for each plate thickness, the maximum DSIF is higher than that for the plane stress case.     

A new analytical technique to find periodic solutions of non-linear systems

Based on the classical harmonic balance method a new technique is presented to determine higher approximate periodic solutions of the non-linear differential equations. The new method is systematic and simple. The solution covers the general initial value problem (i.e., for while the existing solution is determined for a particular case, especially for . The solution is easily transformed to perturbation solution. The method is used in various non-linear problems possessing second and more than second derivatives.     

A gradient theory of small-deformation isotropic plasticity that accounts for the Burgers vector and for dissipation due to plastic spin

This study develops a gradient theory of small-deformation viscoplasticity based on: a system of microforces consistent with its peculiar balance; a mechanical version of the second law that includes, via the microforces, work performed during viscoplastic flow; a constitutive theory that accounts for the Burgers vector through a free energy dependent on , with H^p the plastic part of the elastic-plastic decomposition of the displacement gradient. The microforce balance and the constitutive equations, restricted by the second law, are shown to be together equivalent to a nonlocal flow rule in the form of a coupled pair of second-order partial differential equations. The first of these is an equation for the plastic strain-rate in which the stress T plays a basic role; the second, which is independent of T, is an equation for the plastic spin. A consequence of this second equation is that the plastic spin vanishes identically when the free energy is independent of, but not generally otherwise. A formal discussion based on experience with other gradient theories suggests that sufficiently far from boundaries solutions should not differ appreciably from classical solutions, but close to microscopically hard boundaries, boundary layers characterized by a large Burgers vector and large plastic spin should form.Because of the nonlocal nature of the flow rule, the classical macroscopic boundary conditions need be supplemented by nonstandard boundary conditions associated with viscoplastic flow. As an aid to solution, a variational formulation of the flow rule is derived.Finally, we sketch a generalization of the theory that allows for isotropic hardening resulting from dissipative constitutive dependences on .     

Deformation of FCC nanowires by twinning and slip

We present atomistic simulations of the tensile and compressive loading of single crystal face-centered cubic (FCC) nanowires with and orientations to study the propensity of the nanowires to deform via twinning or slip. By studying the deformation characteristics of three FCC materials with disparate stacking fault energies (gold, copper and nickel), we find that the deformation mechanisms in the nanowires are a function of the intrinsic material properties, applied stress state, axial crystallographic orientation and exposed transverse surfaces. The key finding of this work is the first order effect that side surface orientation has on the operant mode of inelastic deformation in both and nanowires. Comparisons to expected deformation modes, as calculated using crystallographic Schmid factors for tension and compression, are provided to illustrate how transverse surface orientations can directly alter the deformation mechanisms in materials with nanometer scale dimensions.