Enthalpies of formation and O-O and C-O bond strengths in polyoxides RO x R′ and RO x

Bond strengths in RO-OOR, ROO-OH, and ROO-OOR (R, R = H, Me, Et, and Bu) molecules, calculated by the semiempirical quantum-chemical methods, were used to determine the enthalpies of formation of polyoxides RO _x R (x = 3, 4) and related radicals and the bond strengths (D/kcal mol^–1) in these molecules:D(ROOO-OR) = 33.2±0.9,D(ROOO-OH) = 37.5±0.7,D(R-O _x R) = 76.0±1.2,D(H-000) = 58.6,D(R-000) = 42.8±0.8. A new value of Benson's polyoxide thermochemical increment, _f H°[O-(O)₂] = 11.1±1.0 kcal mol^–1, was suggested.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 2190–2193, September, 1996.     

On some multiplicative product of kth derivative of Dirac's delta in x0+|x| and x0−|x|

In this paper we give a sense to the products $${{\left| x \right|^{(n - 2)/2} }} \cdot \frac{{\delta ^{(k - 1)} (x_0 + \left| x \right|)}} {{\left| x \right|^{(n - 2)/2} }}$$ and $\delta ^{(k - 1)} (x_0 - \left| x \right|) \cdot \delta ^{(k - 1)} (x_0 + \left| x \right|)$ . The first of them is a generalization of the product $${{\left| x \right|^{(n - 2)/2} }} \cdot \frac{{\delta (x_0 + \left| x \right|)}} {{\left| x \right|^{(n - 2)/2} }}{\text{ }}$$ given in [1, p. 158].     

Preparation and characterization of Ca1 − x Ce x MnO3 perovskite electrodes

The electrochemical properties of Ca_1 − x Ce _x MnO₃ perovskite-type oxide electrode have been investigated by cyclic voltammetry in Na₂SO₄ aqueous solutions with pH 14. The structural and morphological characterizations have also been investigated and the information used to interpret the electrochemical behavior. An estimation of the electrode’s capacitance and roughness factor has been obtained by means of cyclic voltammetry. The specific capacitance and consequently the roughness factor values are affected by the presence of Ce ions in the oxide. These findings are in agreement with the increase of the oxide-specific surface area by the introduction of Ce ion. The open-circuit potential and the voltammetric patterns are dependent on the presence of Ce ion in the electrodes and support that the surface electrochemistry of the perovskite oxide electrodes is governed by the Mn⁴⁺–Mn³⁺ redox couple.     

Electrochemical preparation and magnetic properties of submicron Co x Pb1−x dendrites

Magnetic dendrites of Co _x Pb_1−x were fabricated through potentiostatic electrochemical deposition on Cu substrates in boric acid solution at room temperature. The as-deposited dendrites were determined by scanning electron microscopy (SEM), X-ray diffraction (XRD), transmission electron microscopy (TEM), electrodeposition (ED), and energy dispersive X-ray spectroscopy (EDS). SEM results indicate that the Co _x Pb_1−x dendrites are highly symmetrical in structures. The diameters of the branches are about 50 ~ 200 nm, and the backbones are continuous with lengths up to about 10 μm. XRD patterns show that the as-deposited dendrites are solid solutions. The annealing treatment can result in the recrystallization of these metastable alloys into two separate phases. TEM, ED, and EDS results also reveal that the backbones and the branches of the dendrites are composed of different amounts of cobalt. Magnetic measurements confirm that the as-deposited Co _x Pb_1−x dendrites have a softly ferromagnetic behavior, and a small coercive force (about 80 Oe). Also the saturation magnetizations of the Co _x Pb_1−x dendrites decrease rapidly with the temperature increasing.     

Atoms state and interatomic interactions in perovskite-like oxides: XXXII. Formation of paramagnetic clusters in the La1−0.33x Ca0.33x Fe x Al1−x O3 and La1−0.33x Sr0.33x Fe x Al1−x O3 solid solutions

Calcium- and strontium-containing lanthanum orthoferrites have been studied using magnetic dilution method. It has been shown that the iron-atom clusters with competing ferro- and antiferromagnetic exchange interactions can exist. By using Mossbauer spectroscopy, Fe(IV) atoms have been found in the La_1?0.33x Ca_0.33x Fe_xAl_1?x O₃ solid solutions and Fe(III) atoms in two different surroundings have been found in the La_1?0.33x Sr_0.33x Fe _x Al_1?x O₃ solid solutions. The compositions of paramagnetic clusters stable at the infinite dilution have been proposed basing of the magnetic susceptibility and Mossbauer spectroscopy data.     

Synthesis and crystal structure of Mo6−x Nb x I11 (x = 1–1.5)

A solid solution Mo_{6 ? x} Nb _x I₁₁ (x = 1.1–1.5) containing cluster cores {Mo₅NbI₈} is obtained by the high-temperature reaction of molybdenum, niobium, and iodine (550°C, 70 h, quartz ampule). According to the X-ray diffraction data, heating at 800°C in a molybdenum container results in the decomposition of the solution to Mo₆I₁₂ and Nb₆I₁₁. According to the X-ray structure analysis data, the compounds are isostructural to the high-spin modification Nb₆I₁₁ (space group Pccn). The presence of Nb atoms in the structure changes the structural type from the layered (Mo₆I₁₂) to framework structure, noticeably increases the metalmetal distances (2.661–2.716 Å, 2.695 Å) Mo₆ octahedron with the retention of the distance from the metal (M) to the μ₃-“capped” I atoms, and strongly elongates the M₆-I-M₆ bridges almost to the value observed in Nb₆I₁₁.     

Synthesis and characterization of nano-structured Th1?x Ce x O2 mixed oxide

GEL combustion technique was applied to obtain oxides of thorium and cerium from their respective nitrate solutions using citric acid as the gelating agent. The dried samples were characterized by IR and TG studies. Intermediate and final products during TG studies have been isolated and characterized by XRD studies. All the TG runs during heating of thorium and cerium nitrate with citric acid dried Gels showed a two step process. The weight loss at each step and the X-ray data of the product at each step, helped in suggesting a possible mechanism. Kinetic study was carried out independently for each step. The reaction mechanism as observed during interactive procedure was found to be diffusion controlled. The kinetic parameters (activation energy and pre-exponential factor) for each step in all reactions have been calculated. Observations from XRD studies show that with increase in cerium concentration in the oxides, the lattice parameter values have shown a decreasing trend for all the five compositions studied. It was observed that in TG studies with increase in cerium concentration, the final temperature of the reactions have shown a decreasing trend. SEM studies of the powders reveal that synthesized oxides have a tendency to form agglomerate of varying size ranging from 50 to 100 μm in case of mixed oxides but the size of thorium oxide powder so synthesized have pore size 10–100 μm. SEM images shows that GEL combustion may result in agglomeration, if the temperature is not properly controlled to the desired value. SEM studies also reveal that each agglomerate contains approximately 10–100 individual particles. Surface area of the mixed oxide powders were determined using Gas adsorption technique. The surface area was found to be in the range of 3–17 m²/g in all cases. Specific surface area of thorium oxide was found to be lesser than cerium oxide but in case of mixed oxides surface area decreases with increase in cerium content. Majority of pores, indicating the particle size are in the range of 0.01–0.04 cm³/g.     

Synthesis and optical properties of quasi-2D CdS x Se1 − x nanoparticles

Colloidal 2D CdS _x Se_{1 ? x} nanoparticles have been synthesized by a solution method in octadecene using oleic acid as a stabilizer. Growth of quasi-2D nanoparticles has been promoted by the presence of cadmium acetate in the reaction mixture. The resulting nanoparticles are platelets with lateral sizes 20–30 nm. The absorption and luminescence spectra of these nanoparticles show narrow bands of lh-e and hh-e exciton transitions corresponding to 2D systems. The spectral position of the lowest energy hh-e transition monotonically changes within 382–461 nm with a change in the composition of nanoparticles. The observed absorption bands are broader than those for the individual CdSe and CdS nanoparticles. The suggested method makes it possible to vary the exciton band position for quasi-2D nanoparticles by changing their composition.     

Structures and optical properties of Zn1?x Ni x O nanoparticles by coprecipitation method

Nanocrystals of undoped and nickel-doped zinc oxide (Zn_1?x Ni _x O, where x?=?0.00?C0.05) were synthesized by the coprecipitation method. Crystalline size, morphology, and optical absorption of prepared samples were determined by X-ray diffraction (XRD), transmission electron microscope (TEM), scanning electron microscope (SEM), and UV?Cvisible spectrometer. XRD and SEM studies revealed that Ni-doped ZnO crystallized in hexagonal wurtzite structure. Doping of ZnO with Ni²⁺ was intended to enhance the surface defects of ZnO. The incorporation of Ni²⁺ in place of Zn²⁺ provoked an increase in the size of nanocrystals as compared to undoped ZnO. Crystalline size of nanocrystals varied from 10 to 40?nm as the calcination temperature increased. Enhancement in the optical absorption of Ni-doped ZnO indicated that it can be used as an efficient photocatalyst under visible light irradiation. Optical absorption measurements indicated a red shift in the absorption band edge upon Ni doping. The band gap value of prepared undoped and Ni-doped ZnO nanoparticles decreased as annealing temperature was increased up to 800?°C.     

Electrocrystallization of PrO2 and TbO2−x from alkali hydroxide melts and characterization of the fluorite-related TbO2−x

Single crystals of PrO₂ and of the oxygen deficient fluorite related phase TbO_2−x have been obtained by anodic electrocrystallization from alkaline hydroxide melts containing PrCl₃ and TbCl₃, respectively. Magnetic measurements, X-ray diffraction data and TEM investigations confirm the identity of the products. PrO₂ crystallizes in a fluorite type of structure with a=5.3945(3) Å and shows paramagnetic behaviour with a magnetic moment as expected for Pr⁴⁺ (μ_eff=2.49μ_B, Θ=−109 K, T_N=10 K). According to precession photographs and an examination with an area sensitive X-ray detector, TbO_2−x exhibits a superstructure of fluorite with a pseudocubic subcell with a_f=5.2810(1) Å. This lattice constant is intermediate between those of TbO₂ and Tb₂O₃ (C-type), the same is true for its paramagnetic behaviour (μ_eff=8.58μ_B, Θ=−22 K, T_N=5 K). The supercell was found to be hexagonal with a=25.836(1) Å and c=36.672(2) Å, the symmetry of the intensity distribution being monoclinic. Electron diffraction revealed a cubic cell with a=10.6 Å, space group Ia-3, indicating reduction of the material in the electron beam.     

A study for structure and inter-diffusion coefficient of liquid K1− x Cs x metal alloys

Inter-diffusion coefficients of liquid K_{1? x} Cs _x metal alloys are calculated using scaling law proposed by Samanta et al. [A. Samanta, Sk.M. Ali, and S.K. Ghosh, Phys. Rev. Lett. 87, 245901 (2001)] following Dzugutov [M. Dzugutov, Nature 381, 137 (1996)], which express the possible relationship between the excess entropy and diffusion coefficient. The interatomic interactions are described from the individual version of the electron–ion potential proposed by Fiolhais et al. [C. Fiolhais, J.P. Perdew, S.Q. Armster, J.M. McLaren, and M. Brajczewska, Phys. Rev. B 51, 14001 (1995)]. The partial pair distribution functions and structure factors are calculated from the solution of Ornstein–Zernike integral equation with Rogers–Young closure. The evaluations with the composition of static structure and the inter-diffusion properties are discussed.     

Electronic and Structural Properties of Neutral, Anionic, and Cationic Rh x Cu4−x (x = 0–4) Small Clusters: A DFT Study

In this study, electronic structure, stability, and tendency to exchange electron of neutral, anionic, and cationic Rh _x Cu_4?x (x = 0–4) small clusters were investigated by density functional theory calculations. For neutral small clusters, it was found that the most stable structures of Rh₄, Rh₃Cu and Rh₂Cu₂ have distorted tetrahedral shape while the most stable structures of RhCu₃ and Cu₄ have quasi-planer shape. Adding charges to the clusters, caused shapes of the most stable structures undergo variations. Stabilities of the neutral, anionic, and cationic clusters decrease linearly with increasing the copper content. In addition, calculated chemical harnesses indicated that the small cluster with 75 % copper content has the least chemical hardness. Interestingly, prevailing number of electronegative (Rh) and electropositive (Cu) atoms in the anionic and cationic clusters coincides with high dipole moment in these species that occur at 25 and 75 % copper respectively.     

Synthesis and electrochemical properties of nanosized carbon-coated Li1−3x La x FePO4 composites

Nanosized carbon-coated Li_1−3x La _x FePO₄ composites were synthesized using a fast, easy, microwave assisted, room-temperature, solid-state method. A lanthanum precursor was used to improve the electronic conductivity of LiFePO₄. The particle structure of the as-synthesized samples was observed using transmission electron microscopy. The results indicated that a uniform and continuous carbon layer was formed on the surface of Li_1−3x La _x FePO₄ particles. Electrochemical techniques, such as cyclic voltammetry, charge/discharge test, and electrochemical impedance spectroscopy were used to investigate the electrochemical performance of the samples. The results of electrochemical measurements revealed that the carbon coating and lanthanum doping provided an initial discharge capacity of 145 mA h/g with excellent rate capacity and long cycling stability. These advantages, coupled with the low cost, the high thermal stability, and the environmental friendliness of the raw materials, render Li_1−3x La _x FePO₄/C composites attractive for practical and large-scale applications.     

Synthesis and magnetic properties of CuCr1.5Sb0.5S4 ? x Se x solid solutions

CuCr_1.5Sb_0.5S_{4 ? x} Se _x (x = 0, 0.5, 3.5, 4) metal chalcogenides with spinel structure have been synthesized for the first time. Unit cell parameters have been calculated and magnetic properties have been measured for the samples prepared. These samples are nonuniform antiferromagnets having Neel temperatures of T _N = 21?C30 K.     

Kinetics of phase transition and thermal stability in Se80?x Te20Zn x (x?=?2, 4, 6, 8, and 10) glasses

Se_80?x Te₂₀Zn _x (x?=?2, 4, 6, 8, and 10) glasses have been prepared using conventional melt quenching technique. The kinetics of phase transformations (glass transition and crystallization) have been studied using differential scanning calorimetry (DSC) under non-isothermal condition at five different heating rates in these glasses. The activation energy of glass transition (E _t), activation energy of crystallization (E _c), Avrami exponent (n), dimensionality of growth (m), and frequency factor (K _o) have been investigated for the better understanding of growth mechanism using different theoretical models. The activation energy is found to be highly dependent on Zn concentration. The rate of crystallization is found to be lowest for Se₇₀Te₂₀Zn₁₀ glassy alloy. The thermal stability of these glasses has been investigated using various stability parameters. The values of these parameters were obtained using characteristic temperatures, such as glass transition temperature T _g, onset crystallization temperature T _c, and peak crystallization temperature T _p. In addition to this, enthalpy-released during crystallization has also been determined. The values of stability parameters show that the thermal stability increases with the increase in Zn concentration in the investigated glassy samples.     

Optical response of bimetallic Li x Na8−x (0≦x≦8) and of doped Na8Zn clusters

Total (elastic + inelastic) cross-sections for electron scattering from C, N, O atoms and their simple molecules are studied theoretically. Thee ^–-C, N, O atomic calculations are done in the complex optical potential approach. To study the electron scattering from O₂, N₂, CO, NO, CN, C₂ as well as CO₂, N₂O, NO₂ O₃ targets, we have adopted an additivity rule, wherein the molecular cross-section is an incoherent sum of the cross-sections of the constituent atoms. The cross-sections of C, N & O atoms are presented at incident energiesE _i =10–1000 eV, the molecular cross-sections are presented atE _i =100–1000 eV. The reliability of the additivity rule is discussed against the background of experimental data.     

Phase equilibriums, oxygen exchange kinetics and diffusion in oxides CaZr1 ? x Sc x O3 ? x/2 ? δ

Oxides CaZr_{1 ? x} Sc _x O_{3 ? x/2 - ??} (x = 0.00?C0.20) were synthesized according to the ceramic technology. The solubility boundary of scandium with formation of solid solutions on the basis of calcium zirconate CaZrO_{3 ? ??} corresponds to x = 0.07?C0.08. The second phase of CaSc₂O₄ is present in the samples with scandium content of x = 0.10, 0.15, 0.20. Its fraction grows at an increase in x. The method of full-profile Rietveld analysis was used to calculate the structure parameters for oxides CaZr_0.99Sc_0.01O_{2.995 ? ??} and CaZr_0.95Sc_0.05O_{2.975 ? ??}. The method of isotopic exchange with gas phase analysis was used to study the kinetics of gas-phase oxygen interaction with the CaZr_0.95Sc_0.05O_{2.975 ? ??} oxide in the temperature range of 700?C850°C and at oxygen pressures of 0.13?C6.67 kPa. The values of effective activation energies of the oxygen exchange and diffusion processes were 1.36 ± 0.32 and 1.92 ± 0.21 eV, accordingly. The dependence of the interphase exchange rate on the pressure of oxygen corresponds to the power law with the exponent of 0.31 ± 0.04 at the temperature of 750°C.     

Electrical and electro-chemical characterisation of La0.99Fe1−x Ni x O3−δ perovskites

(LFN, 0<x<0.6) perovskites were synthesised by a solid-state route and were characterised by powder XRD, dilatometry, four-point DC conductivity measurements and electro-chemical impedance spectroscopy (EIS) on cone-shaped electrodes using a Ce_1.9Gd_0.1O_1.95 (CGO10) electrolyte. All the compounds were of single phase, and they belong to either the cubic or the hexagonal crystal system. The thermal expansion coefficient (TEC) was in the range 10.7*10⁻⁶ K⁻¹ to 13.4*10⁻⁶ K⁻¹, which continued to increase with increasing nickel content. The highest electronic conductivity was measured for the composition giving a value of 670 S/cm at 380 °C. The highest electro-chemical performance was measured for the composition giving an area specific resistance as low as 5.5 Ωcm² at 600 °C based on EIS measurements on a cone-shaped electrode. Composite cathodes made from and CGO10 revealed a rather low performance due to an un-optimised micro-structure.

---

Electrochemical reduction of NO and O2 on La2−x Sr x CuO4-based electrodes

A series of La_2 − x Sr _x CuO₄ (x = 0.0, 0.05, 0.15, 0.25 and 0.35) compounds was investigated for the use of direct electrochemical reduction of NO in an all-solid-state electrochemical cell. The materials were investigated using cyclic voltammetry in 1% NO in Ar and 10% O₂ in Ar. The most selective electrode material was La₂CuO₄, which had an activity of NO reduction that was 6.8 times higher than that of O₂ at 400 °C. With increasing temperature, activity increased while selectivity decreased. Additionally, conductivity measurements were carried out, and the materials show metallic conductivity behavior which follows an adiabatic small polaron hopping mechanism.