Preparation, characterization, and structural systematics of diphosphane and diarsane complexes of indium(III) halides

The ligands o-C6H4(PMe2)2 and o-C6H4(AsMe2)2 (L-L) react with anhydrous InX3 (X = Cl, Br, or I) in a 2:1 InX3/ligand ratio to form [InX2(L-L)][InX4] containing distorted tetrahedral cations, established by X-ray crystal structures for L-L = o-C6H4(PMe2)2 (X = Br or I) and o-C6H4(AsMe2)2 (X = I). IR, Raman, and multinuclear NMR ((1)H, (31)P, (115)In) spectroscopy show that these are the only species present in solution in chlorocarbons and in the bulk solids. The products from reactions in a 1:1 or 1:2 molar ratio are more diverse and include the halide-bridged dimers [In2Cl6{o-C6H4(PMe2)2}2] and [In2X6{o-C6H4(AsMe2)2}2] (X = Cl or Br) and the distorted octahedral cation trans-[InBr2{o-C6H4(PMe2)2}2][InBr4]. The neutral complexes partially rearrange in chlorocarbon solution, with multinuclear NMR spectroscopy revealing [InX4](-) among other species. The iodo complexes trans-[InI2(L-L)2][InI4(L-L)] contain rare examples of six-coordinate anions, as authenticated by an X-ray crystal structure for L-L = o-C6H4(PMe2)2. Two species of formula [In2Cl5(L-L)2]n[InCl4]n (L-L = o-C6H4(PMe2)2 and o-C6H4(AsMe2)2) were identified crystallographically and contain polymeric cations with six-coordinate indium centers bonded to one chelating L-L and a terminal chlorine, linked by alternating single and double chlorine bridges into chains. The complicated chemistry of InX3 with these two rigid chelates is contrasted with that of the flexible diphosphane Et2P(CH2)2PEt2, which forms [In2Cl6{Et2P(CH2)2PEt2}2], and with more sterically demanding o-C6H4(PPh2)2 (Sigl et al. Eur. J. Inorg. Chem. 1998, 203-210). The results also contrasted with those found for GaX3 with the same ligands (Cheng et al. Inorg. Chem. 2007, 46, 7215-7223).     

Kinetic study of the addition of trihalides to unsaturated compounds in ionic liquids. Evidence of a remarkable solvent effect in the reaction of ICl2-

The kinetic constants and activation parameters for the reactions of Br(3)(-) and ICl(2)(-) with some alkenes and alkynes have been determined in the ionic liquids [bmim][PF(6)], [emim][Tf(2)N], [bmim][Tf(2)N], [hmim][TF(2)N], [bm(2)im][Tf(2)N], and [bpy][TF(2)N] (where emim = 1-ethyl-3-methylimidazolium, bmim = 1-butyl-3-methylimidazolium, hmim = 1-hexyl-3-methylimidazolium, bm(2)im = 1-butyl-2,3-dimethylimidazolium, bpy = butylpyridinium, PF(6) = hexafluorophosphate, and Tf(2)N = bis(trifluoromethylsulfonyl)imide) and in 1,2-dichloroethane. The rates of both reactions increase on going from 1,2-dichloroethane to ILs. Evidence suggests that, while the hydrogen bonding ability of the imidazolium cation is probably the main factor able to increase the rate of the addition of ICl(2)(-) to double and triple bonds, this property has no effect on the electrophilic addition of Br(3)(-) to alkenes and alkynes. Furthermore, in the case of the ICl(2)(-) reaction, the hydrogen bonding ability of ILs can be exploited to suppress the unwanted nucleophilic substitution reaction on the products by the Cl(-) anion.     

Combination effects of cation and anion of ionic liquids on the cadmium metal-organic frameworks in ionothermal systems

The effects of cation and/or anion of two groups of ionic liquids ([EMI]X and [PMI]X, where EMI = 1-ethyl-3-methylimidazolium; PMI = 1-propyl-3-methylimidazolium; X = Cl, Br, and I) on the ionothermal reactions between Cd(NO 3) 2.4H 2O and 1,3,5-benzenetricarboxylic acid (H 3BTC) were studied. Three different Cd-BTC metal-organic frameworks, [EMI][Cd2(BTC)Cl2](1), [EMI][Cd(BTC)](2), and [PMI][Cd(BTC)](3), were formed into crystalline phases. 1 was obtained from reactions in [EMI]Cl, while the same reactions with Cl replaced by Br or I produced a known compound 2. The replacement of EMI(+) by PMI(+) produced 3, irrespective of the nature of X.     

Headspace Single Drop Microextraction Using Micellar Ionic Liquid Extraction Solvents

A headspace single drop microextraction (SDME) method using extraction solvents comprised of micellar ionic liquids (ILs) was used to perform the extraction of 17 aromatic compounds from aqueous solution and coupled with liquid chromatography. The effects of various experimental parameters including type of micellar IL extraction solvent, stir rate, extraction time, volume of the microdroplet, and addition of organic solvent were investigated and optimized. Two different micellar solutions were formed by dissolving 1-decyl-3-methylimidazolium bromide ([DMIM][Br]) and sodium dodecyl sulfate (SDS) in 1-butyl-3-methylimidazolium chloride ([BMIM][Cl]). It was observed that the enrichment factors of the 17 studied compounds were all enhanced with the micellar ionic liquid extraction solvent compared to the neat [BMIM][Cl] IL. The highest sensitivity was obtained with the [BMIM][Cl]–[DMIM][Br] micellar solution for polycyclic aromatic hydrocarbons (PAHs) with high molecular weight and fused rings while the [BMIM][Cl]–SDS micellar solution was proven to be more sensitive for smaller, more polar molecules. The detection limits were lower when utilizing the [BMIM][Cl]–SDS and [BMIM][Cl]–[DMIM][Br] extraction solvents compared to the neat [BMIM][Cl] extraction solvent. The reproducibility of the extraction method at 20 °C using extraction solvents composed of [BMIM][Cl]–SDS and [BMIM][Cl]–[DMIM][Br] ranged from 6.7 to 14.0 and 4.2 to 14.7%, respectively.     

Stable gold(III) complexes with thiosemicarbazone derivatives

Novel thiosemicarbazonato complexes of gold(III) have been prepared from reactions of [Au(damp-C1,N)Cl2(damp- = 2-(N,N-dimethylaminomethyl)phenyl) or [NBu4][AuCl4] with 2-pyridineformamide thiosemicarbazones (HL). The thiosemicarbazones deprotonate and coordinate as mononegative, tridentate NNS ligands to gold to give [Au(Hdamp-C1)(L)]Cl2 or [AuCl(L)]Cl complexes. The organometallic damp- ligand is protonated during the reactions and the Au-N bond is cleaved. The [AuCl(L)]+ cations represent the first gold(III) complexes with thiourea derivatives which are not stabilised by an additional organometallic ligand. Reactions of [NBu4][AuX4](X = Cl, Br) with diphenylthiocarbazone (dithizone) result in reduction of the metal and the formation of gold(I) complexes of the composition [AuX(SCN4-3,4-Ph2)] where SCN4-3,4-Ph2 is 3,4-diphenyltetrazole thione which is formed from cyclisation of dithizone.     

Syntheses, structures, and reactivity of new pentamethylcyclopentadienyl-rhodium(III) and -iridium(III) 4-acyl-5-pyrazolonate complexes

New [CpM(Q)Cl] complexes (M = Rh or Ir, Cp = pentamethylcyclopentadienyl, HQ = 1-phenyl-3-methyl-4R(C=O)-pyrazol-5-one in general, in detail HQ(Me), R = CH(3); HQ(Et), R = CH(2)CH(3); HQ(Piv), R = CH(2)-C(CH(3))(3); HQ(Bn), R = CH(2)-(C(6)H(5)); HQ(S), R = CH-(C(6)H(5))(2)) have been synthesized from the reaction of [CpMCl(2)](2) with the sodium salt, NaQ, of the appropriate HQ proligand. Crystal structure determinations for a representative selection of these [CpM(Q)Cl] compounds show a pseudo-octahedral metal environment with the Q ligand bonded in the O,O'-chelating form. In each case, two enantiomers (S(M)) and (R(M)) arise, differing only in the metal chirality. The reaction of [CpRh(Q(Bn))Cl] with MgCH(3)Br produces only halide exchange with the formation of [CpRh(Q(Bn))Br]. The [CpRh(Q)Cl] complexes react with PPh(3) in dichloromethane yielding the adducts CpRh(Q)Cl/PPh(3) (1:1) which exist in solution in two different isomeric forms. The interaction of [CpRh(Q(Me))Cl] with AgNO(3) in MeCN allows generation of [CpRh(Q(Me))(MeCN)]NO(3).3H(2)O, whereas the reaction of [CpRh(Q(Me))Cl] with AgClO(4) in the same solvent yields both [CpRh(Q(Me))(H(2)O)]ClO(4) and [CpRh(Cl)(H(2)O)(2)]ClO(4); the H(2)O molecules derive from the not-rigorously anhydrous solvents or silver salts.     

Volatile imido-hydrazido compounds of the refractory metals niobium, tantalum, molybdenum, and tungsten

Volatile 1,1-dimethyl-2-(trimethylsilyl)hydrazido(1-) complexes of niobium, tantalum, molybdenum, and tungsten have been synthesized and fully characterized for use as precursors in their chemical vapor deposition to metal nitrides. Different reaction patterns were observed in the hydrazinolysis of imido complexes of those four metals with (trimethylsilyl)dimethylhydrazine HN(SiMe3)NMe2 (H-TDMH). [Ta(NtBu)Cl3Py2] gave [Ta(TDMH)2Cl3] (1) with loss of the imido functionality, and [M(NtBu)2Cl2Py2] gave [M(NtBu)2(TDMH)Cl] (M = W, 8a; Mo, 8b). Reactions of both types of metal imido complexes with magnesium hydrazides produced [M(NtBu)(TDMH)2X] (M = Ta, X = Cl, 2a; X = Br, 3a; M = Nb, X = Cl, 2b; X = Br, 3b) and [M(NtBu)2(TDMH)X] (M = W, X = Cl, 8a; X = Br, 9a; M = Mo, X = Cl, 8b; X = Br, 9b). Halogen substitution reactions at 2 and 3 by -NMe2, -NHtBu, and CH2Ph groups as well as imido ligand replacement reactions have been investigated. The results of crystal structure determinations of 1, 4a, 5a, 6a, 7b, and 9b are presented.     

The physicochemical properties of some imidazolium-based ionic liquids and their binary mixtures

The density, viscosity and conductivity of ionic liquids (ILs), 1-octyl-3-methylimidazolium tetrafluoroborate ([omim][BF4]), 1-octyl-3-methylimidazolium chloride ([omim][Cl]), 1-hexyl-3-methylimidazolium tetrafluoroborate ([hmim] BF4]), 1-hexyl- 3-methylimidazolium chloride ([hmim][Cl]), 1-hexyl-3-methylimidazolium hexafluorophosphate ([hmim][PF6]), and the [omim][BF4] + [omim][Cl], [hmim][BF4] + [hmim][Cl], and [hmim][PF6] + [hmim][Cl] binary mixtures were studied at dif- ferent temperatures. It was demonstrated that the densities of both the neat ILs and their mixtures varied linearly with temper- ature. The density sensitivity of a binary mixture is between those of the two components. The excess molar volumes (VE) of [hmim][BF4] + [hmim][Cl] and [hmim][PF6] + [hmim][Cl] mixtures are positive in the whole composition range. For [omim][BF4] + [omim][Cl], the VE is also positive in the [omim][Cl]-rich region, but is negative in the [omim][BF4]-rich re- gion. The viscosity or conductivity of a mixture is in the intermediate of those of the two neat ILs. For all the neat ILs and the binary mixtures studied, the order of conductivity is opposite to that of the viscosity. The Vogel-Tammann-Fulcher (VTF) equations can be used to fit the viscosity and conductivity of all the neat ILs and the binary mixtures. The neat ILs and their mixtures obey the Fractional Walden Rule very well, and the values of the Walden slopes are all smaller than unit, indicating obvious ion associations in the neat ILs and the binary mixtures.     

Synthesis, structural characterization, and magnetic studies of polynuclear iron complexes with a new disubstituted pyridine ligand

A series of novel polyiron species have been prepared from the reaction of iron chloride with the 2,5-disubstituted pyridines H2L(n) (H2L1) = N,N'-bis(n-butylcarbamoyl)pyridine-2,6-dicarboxamide; H2L2 = N,N'-bis(n-ethylcarbamoyl)pyridine-2,6-dicarboxamide). By small modifications of the experimental conditions under which the reactions are carried out, it has been possible to prepare the quadruply stranded diiron(II) complex [Fe2(mu-H2L1)4(mu-Cl)2][FeCl4]2 (1), the metallamacrocycle [Fe2(mu-H2L1)2(THF)4Cl2][FeCl4]2 (2), the hexairon(III) compound [Fe6(L1)2(mu-OMe)6(mu4-O)2Cl4] (3), and the mixed-valence trinuclear iron complexes [Fe3(L(n))3(mu3-O)] (n = 1, 4; n = 2, 5). The X-ray crystal structures of 3 and 5 and magnetic studies for all the compounds are herein presented. Interestingly, the structural analysis of 5 at room temperature indicates that one of the iron centers is Fe(III) while the other two have an average valence state between Fe(II) and Fe(III). The five complexes herein presented demonstrate the great versatility that the new ligand has as a building block for the formation of supramolecular coordination assemblies.     

Isobaric vapor–liquid equilibria for ethanol–water system containing different ionic liquids at atmospheric pressure

Isobaric vapor–liquid equilibrium (VLE) data for ethanol–water systems containing ionic liquids (ILs) 1-methyl-3-methylimidazolium dimethylphosphate ([MMIM][DMP]), 1-ethyl-3-methylimidazolium diethylphosphate ([EMIM][DEP]), 1-butyl-3-methylimidazolium bromide ([BMIM][Br]), 1-butyl-3-methylimidazolium chloride ([BMIM][Cl]) and 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF₆]) at atmospheric pressure (101.32 kPa) were measured with a circulation still. The results showed that the VLE of ethanol–water systems in the presence of different ILs was obviously different from that of the IL-free system. All ILs studied showed a salting-out effect, which gave rise to a change of the relative volatility of ethanol, and even to an elimination of the azeotropic point. It was found that the salting-out effect followed the order of [BMIM][Cl] > [BMIM][Br] > [BMIM][PF₆] and [MMIM][DMP] > [EMIM][DEP], which was ascribed to the preferential solvation ability of the ions resulting from the dissociation of the IL.     

ReO(N2O2)X] complexes: "4 + 1"?

[ReO(ppme)X] (where ppme(2-) is 2,5-diazo-N,N'-dimethylhexyl-1,6-bis(phenylphosphinate), X = Br0.3Cl0.7) has been synthesized via a substitution reaction and structurally characterized. The coordination geometry is a distorted octahedron and one phosphinate coordinates cis and the other trans to the oxo O atom. This coordination mode is conserved in all [ReOppmeX] complexes synthesized in this study. [ReO(ppme)Cl] has been prepared by a reduction/complexation reaction from [NH4][ReO4]. [ReO(ppme)Cl] reacts with thiocyanate and benzene thiolate forming [ReO(ppme)X] (X = (-)NCS, (-)SC6H5), but the one-pot synthesis of the respective ternary thiolate complexes from perrhenate was not successful. The reduction/complexation reaction of a thiol, H2ppmeCl4, and perrhenate resulted in the formation of [H3ppme][ReO(SR)4], the reaction of which with [ReO(ppme)Cl] does not lead to [ReO(ppme)SR] in high yields.     

Syntheses and reactivity studies of solvated dirhenium acetonitrile complexes

Fully and partially solvated triply-bonded [Re2]4+ complexes have been synthesized and their X-ray structures are described. A fully solvated dirhenium salt with BArf [tetrakis(3,5-bis(trifluoromethyl)phenyl)borate] as the counter anion [Re2(CH3CN)10][BArf]4 () has been characterized. The solubility of the complex in CH2Cl2 and THF in addition to CH3CN offers the possibility of improved reactivity. The structure of [Re2(micro-O)(CH3CN)10][BF4]4 () that possesses a linear [Re(III)-O-Re(III)]4+ unit is reported. Protonation reactions of cis-Re2Cl2(dppm)2(O2CCH3)2 and trans-Re2Cl4(dppm)2 with HBF4.Et2O in acetonitrile afforded cis and trans [Re2(dppm)2(CH3CN)6][BF4]4 ( and ), respectively. Prolonging the reaction time, however, does not lead to fully solvated complex [Re2(CH3CN)10][BF4]4. The neutral nitrogen donor ligands pynp (2-(2-pyridyl)-1,8-naphthyridine) and tznp (2-(2-thiazolyl)-1,8-naphthyridine) react readily with [Re2(CH3CN)10][BF4]4 to provide trans-[Re2(pynp)2(CH3CN)4][BF4]4 and trans-[Re2(tznp)2(CH3CN)4][BF4]4. The X-ray structures trans-[Re2(pynp)2(CH3CN)4][BF4]4 () and trans-[Re2(tznp)2(CH3CN)4][BF4]3[PF6] () have been determined.     

Synthesis and reactivity of the Tl1 salts of

Synthons Tl1[TCNE]*- (1) and Tl12[TCNE]2- (2), for [TCNE]*- and [TCNE]2-, respectively, in metathesis reactions have been quantitatively prepared and characterized. The structure of 1 was solved and refined in a monoclinic unit cell at 27 degrees C [C2/c, a = 12.6966 (12) angstroms, b=7.7599 (7) angstroms, c=15.5041 (15) angstroms, beta = 96.610 (5) degrees , V= 1517.4 (2) angstroms3, Dcalcd = 2.911 gcm-3, Z=8, R1 = 0.0575, omegaR2=0.0701] and exhibits nuCN absorptions at 2,191 (s) and 2,162 (s) cm-1 consistent with metal-bound [TCNE]*-. The structure of 1 consists of a distorted square antiprismatic octacoordinate Tl1 bound to six monodentate [TCNE]*-s with TlN separations ranging from 2.901 to 3.171 angstroms averaging 3.020 angstroms, and one bidentate [TCNE]*- with TlN separations averaging 3.279 angstroms. The TlN bonding is attributed to electrostatic bonding. The [TCNE]*-s form dimerized zigzag chains with intra- and interdimer separations of 2.87 and 3.29 angstroms, respectively. The tight pi-[TCNE](2)2- dimer is diamagnetic and has the shortest intradimer [TCNE]*- distance reported. These synthons for [TCNE]*- and [TCNE]2- in metathesis reactions lead to the precipitation of, for example, TlIX (X = Cl, Br, OAc). Reaction of 1 with MnIII(porphyrin)X (X = Cl, OAc) forms the molecule-based magnets of [MnIII(porphyrin)][TCNE] composition, while the reaction of [CrI(C6H6)2]Br and (Me2N)2CC(NMe2)2Cl2, [TDAE]Cl2, with 1 forms [CrI(C6H6)2] [TCNE] and [TDAE][TCNE]2, respectively. The structure of [TDAE][TCNE]2.MeCN was solved and refined in an orthorhombic unit cell at 21 degrees C [I222, a = 10.2332(15), b = 13.341(6), c = 19.907(8) angstroms, V= 2717.7 angstroms3, Z = 4; Dcalcd = 1.216 gcm-3, R=0.083, Romega = 0.104] and exhibits upsilonCN absorptions at 2,193 (m), 2,174 (s), and 2,163 (s) cm-1 consistent with isolated [TCNE](2)2- , in contrast to the aforementioned TlI bound [TCNE](2)2-. The reaction of 2 with [TDAE]Cl2 forms [TDAE]2+[TCNE]2-.     

Thermodynamic studies of ionic interactions in aqueous solutions of imidazolium-based ionic liquids [Emim][Br] and [Bmim][Cl

Experimental measurements of density at different temperatures ranging from 293.15 to 313.15 K, the speed of sound and osmotic coefficients at 298.15 K for aqueous solution of 1-ethyl-3-methylimidazolium bromide ([Emim][Br]), and osmotic coefficients at 298.15 K for aqueous solutions of 1-butyl-3-methylimidazolium chloride ([Bmim][Cl]) in the dilute concentration region are taken. The data are used to obtain compressibilities, expansivity, apparent and limiting molar properties, internal pressure, activity, and activity coefficients for [Emim][Br] in aqueous solutions. Experimental activity coefficient data are compared with that obtained from Debye-Hückel and Pitzer models. The activity data are further used to obtain the hydration number and the osmotic second virial coefficients of ionic liquids. Partial molar entropies of [Bmim][Cl] are also obtained using the free-energy and enthalpy data. The distance of the closest approach of ions is estimated using the activity data for ILs in aqueous solutions and is compared with that of X-ray data analysis in the solid phase. The measured data show that the concentration dependence for aqueous solutions of [Emim][Br] can be accounted for in terms of the hydrophobic hydration of ions and that this IL exhibits Coulombic interactions as well as hydrophobic hydration for both the cations and anions. The small hydration numbers for the studied ILs indicate that the low charge density of cations and their hydrophobic nature is responsible for the formation of the water-structure-enforced ion pairs.     

Eta 1 and eta 2 Coordination of 1-amino-closo-dodecaborate

The reaction of the sodium salt of 1-amino-closo-dodecaborate [Na]2[NH2-B12H11] ([Na]2[1]) with [Au(PPh3)Cl] and [Ni(THF)2(Br)2] led to eta 1(N) coordination of 1in [Na][Au(PPh3)(NH2-B12H11)] (2) and [Na]6[Ni(NH2-B12H11)4] (3), respectively. Furthermore, eta 2(N,BH) coordination of was found in [MePPh3][Rh(PPh3)2(NH2-B12H11)] (4), which was synthesized by the reaction of [MePPh3][Na][1] with [Rh(PPh3)3Cl]. All compounds were characterized by single crystal X-ray diffraction and heteronuclear NMR spectroscopy.     

Anionic Halomolybdate(III) Chemistry. Tetrahydrofuran Loss from [MoX(3)Y(THF)(2)](-) (X, Y = Cl, Br, I), Preparation and Properties of [Mo(3)X(12)](3)(-) (X = Br, I), and Crystal Structure of the Edge-Sharing Trioctahedral [PPh(4)](3)[Mo(3)I(12)

By interaction of MoX(3)(THF)(3) with [Cat]X in THF, the salts [Cat][MoX(4)(THF)(2)] have been synthesized [X = I, Cat = PPh(4), NBu(4), NPr(4), (Ph(3)P)(2)N; X = Br, Cat = NBu(4), PPh(4) (Ph(3)P)(2)N]. Mixed-halide species [MoX(3)Y(THF)(2)](-) (X, Y = Cl, Br, I) have also been generated in solution and investigated by (1)H-NMR. When the tetraiodo, tetrabromo, and mixed bromoiodo salts are dissolved in CH(2)Cl(2), clean loss of all coordinated THF is observed by (1)H-NMR. On the other hand, [MoCl(4)(THF)(2)](-) loses only 1.5 THF/Mo. The salts [Cat](3)[Mo(3)X(12)] (X = Br, I) have been isolated from [Cat][MoX(4)(THF)(2)] or by running the reaction between MoX(3)(THF)(3) and [Cat]X directly in CH(2)Cl(2). The crystal structure of [PPh(4)](3)[Mo(3)I(12)] exhibits a linear face-sharing trioctahedron for the trianion: triclinic, space group P&onemacr;; a = 11.385(2), b = 12.697(3), c = 16.849(2) ?; alpha = 76.65(2), beta = 71.967(12), gamma = 84.56(2) degrees; Z = 1; 431 parameters and 3957 data with I > 2sigma(I). The metal-metal distance is 3.258(2) ?. Structural and magnetic data are consistent with the presence of a metal-metal sigma bond order of (1)/(2) and with the remaining 7 electrons being located in 7 substantially nonbonding orbitals. The ground state of the molecule is predicted to be subject to a Jahn-Teller distortion, which is experimentally apparent from the nature of the thermal ellipsoid of the central Mo atom. The [Mo(3)X(12)](3)(-) ions reacts with phosphines (PMe(3), dppe) to form products of lower nuclearity by rupture of the bridging Mo-X bonds.     

Bending, twisting, and breaking CuCN chains to produce framework materials: the reactions of CuCN with alkali-metal halides

The reactions of the low-temperature polymorph of copper(I) cyanide (LT-CuCN) with concentrated aqueous alkali-metal halide solutions have been investigated. At room temperature, KX (X = Br and I) and CsX (X = Cl, Br, and I) produce the addition products K[Cu(2)(CN)(2)Br].H(2)O (I), K(3)[Cu(6)(CN)(6)I(3)].2H(2)O (II), Cs[Cu(3)(CN)(3)Cl] (III), Cs[Cu(3)(CN)(3)Br] (IV), and Cs(2)[Cu(4)(CN)(4)I(2)].H(2)O (V), with 3-D frameworks in which the -(CuCN)- chains present in CuCN persist. No reaction occurs, however, with NaX (X = Cl, Br, I) or KCl. The addition compounds, I-V, reconvert to CuCN when washed. Both low- and high-temperature polymorphs of CuCN (LT- and HT-CuCN) are produced, except in the case of Cs[Cu(3)(CN)(3)Cl] (III), which converts only to LT-CuCN. Heating similar AX-CuCN reaction mixtures under hydrothermal conditions at 453 K for 1 day produces single crystals of I-V suitable for structure determination. Under these more forcing conditions, reactions also occur with NaX (X = Cl, Br, I) and KCl. NaBr and KCl cause some conversion of LT-CuCN into HT-CuCN, while NaCl and NaI, respectively, react to form the mixed-valence Cu(I)/Cu(II) compounds [Cu(II)(OH(2))(4)][Cu(I)(4)(CN)(6)], a known phase, and [Cu(II)(OH(2))(4)][Cu(I)(4)(CN)(4)I(2)] (VI), a 3-D framework, which contains infinite -(CuCN)- chains. After 3 days of heating under hydrothermal conditions, the reaction between KI and CuCN produces [Cu(II)(OH(2))(4)][Cu(I)(2)(CN)I(2)](2) (VII), in which the CuCN chains are broken into single Cu-CN-Cu units, which in turn are linked into chains via iodine atoms and then into layers via long Cu-C and Cu-Cu interactions.     

Effect of imidazolium-based ionic liquids on the aggregation behavior of twin-tailed cationic gemini surfactant in aqueous solution

Micellization behavior of the twin-tailed surfactants can be modulated by the addition of various modifiers. Ionic liquids (ILs) are one of them and are documented here. The beauty of these environmentally benign neoteric molecules lies in their structural versatility. Here, we have investigated the effect of three ILs: 1-butyl-3-methylimidazolium bromide ([C₄mim][Br]), 1-hexyl-3-methylimidazolium bromide ([C₆mim][Br]), and 1-octyl-3-methylimidazolium bromide ([C₈mim][Br]) on the aggregation and surface adsorption behavior of cationic gemini surfactant, bis(hexadecyldimethyl ammonium)propane dibromide (16-3-16) through experimentally measured electrical conductivities, surface tensions, and by spectral methods (UV-vis absorbance and fluorescence measurements). The main focus of the study is to observe the effect of added ILs on the critical micelle concentration (cmc), various surface parameters, aggregation number, and size of the aggregates of gemini surfactant. The results show that the more hydrophobic ILs, that is, [C₆mim][Br] and [C₈mim][Br] behave as electrolyte at lower concentration and cosurfactant at higher concentration, whereas moderately hydrophobic IL [C₄mim][Br] acts as an electrolyte at all concentration ranges studied. The modulating effects of ILs were also compared with conventional electrolyte (NaBr) at similar conditions.     

Structural comparison of copper(I) and copper(II) complexes with tris(2-pyridylmethyl)amine ligand

Copper(I) complexes with the tris(2-pyridylmethyl)amine (TPMA) ligand were synthesized and characterized to examine the effect of counteranions (Br(-), ClO(4)(-), and BPh(4)(-)), as well as auxiliary ligands (CH(3)CN, 4,4'-dipyridyl, and PPh(3)) on the molecular structures in both solid state and solution. Partial dissociation of one of the pyridyl arms in TPMA was not observed when small auxiliary ligands such as CH(3)CN or Br(-) were coordinated to copper(I), but was found to occur with larger ones such as PPh(3) or 4,4'-dipyridyl. All complexes were found to adopt a distorted tetrahedral geometry, with the exception of [Cu(I)(TPMA)][BPh(4)], which was found to be trigonal pyramidal because of stabilization via a long cuprophilic interaction with a bond length of 2.8323(12) ?. Copper(II) complexes with the general formula [Cu(II)(TPMA)X][Y] (X = Cl(-), Br(-) and Y = ClO(4)(-), BPh(4)(-)) were also synthesized to examine the effect of different counterions on the geometry of [Cu(II)(TPMA)X](+) cation, and were found to be isostructural with previously reported [Cu(II)(TPMA)X][X] (X = Cl(-) or Br(-)) complexes.     

Study of the Alkyl Chain Length on Laccase Stability and Enzymatic Kinetic with Imidazolium Ionic Liquids

The activity and stability of laccase and their kinetic mechanisms in water soluble ionic liquids (ILs): 1-butyl-3-methyl imidazolium chloride [C₄mim][Cl], 1-octyl-3-methyl imidazolium chloride [C₈mim][Cl], and 1-decyl-3-methyl imidazolium chloride [C₁₀mim][Cl] were investigated. The results show that an IL concentration up to 10% is satisfactory for initial laccase activity at pH 9.0. The laccase stability was well maintained in [C₄mim][Cl] IL when compared to the control. The inactivation of laccase increases with the length of the alkyl chain in the IL: [C₁₀mim][Cl] > [C₈mim][Cl] > [C₄mim][Cl]. The kinetic studies in the presence of ABTS as substrate allowed calculating the Michaelis–Menten parameters. Among the ILs, [C₄mim][Cl] was the suitable choice attending to laccase activity and stability. Alkyl chains in the ions of ILs have a deactivating effect on laccase, which increases strongly with the length of the alkyl chain.