A metallacage encapsulating chloride as a probe for a solvation scale in ionic liquids

With the purpose of assessing the reactivity of chloride ions dissolved in ionic liquids (ILs), a relative scale for the solvation of chloride is given for a series of ILs based on the bis(trifluoromethane)sulfonimide ([Tf(2)N]) anion and different cations, 1-butyl-3-methylimidazolium ([bmim]), 1-butyl-2,3-dimethylimidazolium ([bdmim]), 1-butyl-1-methylpyrrolidinium ([bmpy]), 1-butylpyridinium ([bpy]), 1-pentyl-1,1,1-triethylammonium ([C(5)e(3)am]), and 1-(2-hydroxy)ethyl-3-methylimidazolium ([mimeOH]). Insights into the solvation of chloride are achieved by the thermodynamic study of the reaction of dissociation of a chloride-templated nickel(II) metallacage performed at various temperatures by UV-visible spectroscopy in each IL. The order of chloride solvation [C(5)e(3)am][Tf(2)N] < [bmpy][Tf(2)N] < [bmim][Tf(2)N] 相似文献   

The effect of different interfaces and confinement on the structure of the ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide entrapped in cationic and anionic reverse micelles

The behavior of the ionic liquid (IL) 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([bmim][Tf(2)N]) entrapped in two reverse micelles (RMs) formed in an aromatic solvent as dispersant pseudophase: [bmim][Tf(2)N]/benzyl-n-hexadecyldimethylammonium chloride (BHDC)/chlorobenzene and [bmim][Tf(2)N]/sodium 1,4-bis-2-ethylhexylsulfosuccinate (AOT)/chlorobenzene, was investigated using dynamic light scattering (DLS), FT-IR and (1)H NMR spectroscopies. DLS results reveal the formation of RMs containing [bmim][Tf(2)N] as a polar component since the droplet size values increase as the W(s) (W(s) = [[bmim][Tf(2)N]]/[surfactant]) increases. Furthermore, it shows that the RMs consist of discrete spherical and non-interacting droplets of [bmim][Tf(2)N] stabilized by the surfactants. Important differences in the structure of [bmim][Tf(2)N] entrapped inside BHDC RMs, in comparison with the neat IL, are observed from the FT-IR and (1)H NMR measurements. The electrostatic interactions between anions and cations from [bmim][Tf(2)N] and BHDC determine the solvent structure encapsulated inside the nano-droplets. It seems that the IL structure is disrupted due to the electrostatic interaction between the [Tf(2)N](-) and the cationic BHDC polar head (BHD(+)) giving a high ion pair degree between BHD(+) and [Tf(2)N](-) at a low IL content. On the other hand, for the AOT RMs there is no evidence of strong IL-surfactant interaction. The electrostatic interaction between the SO(3)(-) group and the Na(+) counterion in AOT seems to be stronger than the possible [bmim](+)-SO(3)(-) interaction at the interface. Thus, the structure of [bmim][Tf(2)N] encapsulated is not particularly disrupted by the anionic surfactant at all W(s) studied, in contrast to the BHDC RM results. Nevertheless, there is evidence of confinement in the AOT RMs because the [bmim](+)-[Tf(2)N](-) interaction is stronger than in bulk solution. Thus, the IL is more associated upon confinement. Our results reveal that the [bmim][Tf(2)N] structure can be modified in a different manner inside RMs by varying the kind of surfactant used to create the RMs and the IL content (W(s)). These facts can be very important if these media are used as nanoreactors because unique microenvironments can be easily created by simply changing the RM components and W(s).     

A remarkable anion effect on palladium nanoparticle formation and stabilization in hydroxyl-functionalized ionic liquids

Pd nanoparticles (NPs) with a small size and narrow size distribution were prepared from the decomposition of Pd(OAc)(2) in a series of hydroxyl-functionalized ionic liquids (ILs) comprising the 1-(2'-hydroxylethyl)-3-methylimidazolium cation and various anions, viz. [C(2)OHmim][OTf] (2.4 ± 0.5 nm), [C(2)OHmim][TFA] (2.3 ± 0.4 nm), [C(2)OHmim][BF(4)] (3.3 ± 0.6 nm), [C(2)OHmim][PF(6)] (3.1 ± 0.7 nm) and [C(2)OHmim][Tf(2)N] (4.0 ± 0.6 nm). Compared with Pd NPs isolated from the non-functionalized IL, [C(4)mim][Tf(2)N] (6.2 ± 1.1 nm), it would appear that the hydroxyl group accelerates the formation of the NPs, and also helps to protect the NPs from oxidation once formed. Based on the amount of Pd(OAc)(2) that remains after NP synthesis (under the given conditions) the ease of formation of the Pd NPs in the [C(2)OHmim](+)-based ILs follows the trend [Tf(2)N](-), [PF(6)](-) > [BF(4)](-) > [OTf](-) > [TFA](-). Also, the ability of the [C(2)OHmim](+)-based ILs to prevent the Pd NPs from undergoing oxidation follows the trend [Tf(2)N](-) > [PF(6)](-) > [TFA](-) > [OTf](-) > [BF(4)](-). DFT calculations were employed to rationalize the interactions between Pd NPs and the [C(2)OHmim](+) cation and the various anions.     

Nucleophilicity in ionic liquids. 3. Anion effects on halide nucleophilicity in a series of 1-butyl-3-methylimidazolium ionic liquids

We have continued the study of halide nucleophilicity in ionic liquids, concentrating on the effect of changing the anion ([BF(4)](-), [PF(6)](-), [SbF(6)](-), [OTf](-), and [N(Tf)(2)](-)) when the cation is [bmim](+) (where bmim = 1-butyl-3-methylimidazolium). It was found that the nucleophilicities of all the halides were lower in all of the ionic liquids than in dichloromethane. Changing the anion affected the order of halide nucleophilicity, e.g., in [bmim][BF(4)] the order of nucleophilicity was Cl(-)>Br(-)>I(-) while in [bmim][N(Tf)(2)] the order was Cl(-)相似文献   

Metal-organic framework supported ionic liquid membranes for CO2 capture: anion effects

IRMOF-1 supported ionic liquid (IL) membranes are investigated for CO(2) capture by atomistic simulation. The ILs consist of identical cation 1-n-butyl-3-methylimidazolium [BMIM](+), but four different anions, namely hexafluorophosphate [PF(6)](-), tetrafluoroborate [BF(4)](-), bis(trifluoromethylsulfonyl)imide [Tf(2)N](-), and thiocyanate [SCN](-). As compared with the cation, the anion has a stronger interaction with IRMOF-1 and a more ordered structure in IRMOF-1. The small anions [PF(6)](-), [BF(4)](-), and [SCN](-) prefer to locate near to the metal-cluster, particularly the quasi-spherical [PF(6)](-) and [BF(4)](-). In contrast, the bulky and chain-like [BMIM](+) and [Tf(2)N](-) reside near the phenyl ring. Among the four anions, [Tf(2)N](-) has the weakest interaction with IRMOF-1 and thus the strongest interaction with [BMIM](+). With increasing the weight ratio of IL to IRMOF-1 (W(IL/IRMOF-1)), the selectivity of CO(2)/N(2) at infinite dilution is enhanced. At a given W(IL/IRMOF-1), the selectivity increases as [Tf(2)N](-) < [PF(6)](-) < [BF(4)](-) < [SCN](-). This hierarchy is predicted by the COSMO-RS method, and largely follows the order of binding energy between CO(2) and anion estimated by ab initio calculation. In the [BMIM][SCN]/IRMOF-1 membrane with W(IL/IRMOF-1) = 1, [SCN](-) is identified to be the most favorable site for CO(2) adsorption. [BMIM][SCN]/IRMOF-1 outperforms polymer membranes and polymer-supported ILs in CO(2) permeability, and its performance surpasses Robeson's upper bound. This simulation study reveals that the anion has strong effects on the microscopic properties of ILs and suggests that MOF-supported ILs are potentially intriguing for CO(2) capture.     

Kinetic study of the addition of trihalides to unsaturated compounds in ionic liquids. Evidence of a remarkable solvent effect in the reaction of ICl2-

The kinetic constants and activation parameters for the reactions of Br(3)(-) and ICl(2)(-) with some alkenes and alkynes have been determined in the ionic liquids [bmim][PF(6)], [emim][Tf(2)N], [bmim][Tf(2)N], [hmim][TF(2)N], [bm(2)im][Tf(2)N], and [bpy][TF(2)N] (where emim = 1-ethyl-3-methylimidazolium, bmim = 1-butyl-3-methylimidazolium, hmim = 1-hexyl-3-methylimidazolium, bm(2)im = 1-butyl-2,3-dimethylimidazolium, bpy = butylpyridinium, PF(6) = hexafluorophosphate, and Tf(2)N = bis(trifluoromethylsulfonyl)imide) and in 1,2-dichloroethane. The rates of both reactions increase on going from 1,2-dichloroethane to ILs. Evidence suggests that, while the hydrogen bonding ability of the imidazolium cation is probably the main factor able to increase the rate of the addition of ICl(2)(-) to double and triple bonds, this property has no effect on the electrophilic addition of Br(3)(-) to alkenes and alkynes. Furthermore, in the case of the ICl(2)(-) reaction, the hydrogen bonding ability of ILs can be exploited to suppress the unwanted nucleophilic substitution reaction on the products by the Cl(-) anion.     

7Li NMR studies on complexation reactions of lithium ion with cryptand C211 in ionic liquids: comparison with corresponding reactions in nonaqueous solvents

(7)Li NMR spectra of DEME-TFSA [DEME=N,N-diethyl-N-methyl-N-(2-methoxyethyl)ammonium; TFSA=bis(trifluoromethanesulfonyl)amide], EMI-TFSA (EMI=1-ethyl-3-methylimidazolium), MPP-TFSA (MPP = N-methyl-N-propylpyridinium), DEME-PFSA [PFSA=bis(pentafluoroethanesulfonyl)amide], and DEME-HFSA [HFSA=bis(heptafluoropropanesulfonyl)amide] ionic liquid (IL) solutions containing LiX (X=TFSA, PFSA, or HFSA) and C211 (4,7,13,18-tetraoxa-1,10-diazabicyclo[8.5.5]eicosane) were measured at various temperatures. As a result, it was found that the uncomplexed Li(I) species existing as [Li(X)(2)](-) in the present ILs exchange with the complexed Li(I) ([Li·C211](+)) and that the exchange reactions proceed through the bimolecular mechanism, [Li·C211](+) + [*Li(X)(2)](-)=[*Li·C211](+) + [Li(X)(2)](-). Kinetic parameters [k(s)/(kg m(-1) s(-1)) at 25 °C, ΔH(++)/(kJ mol(-1)), ΔS(++)/(J K(-1) mol(-1))] are as follows: 5.57×10(-2), 69.8 ± 0.4, and -34.9 ± 1.0 for the DEME-TFSA system; 5.77×10(-2), 70.6 ± 0.2, and -31.9 ± 0.6 for the EMI-TFSA system, 6.13×10(-2), 69.0 ± 0.3, and -36.7 ± 0.7 for the MPP-TFSA system; 1.35 × 10(-1), 65.2 ± 0.5, and -43.1 ± 1.4 for the DEME-PFSA system; 1.14×10(-1), 64.4 ± 0.3, and -47.1 ± 0.6 for the DEME-HFSA system. To compare these kinetic data with those in conventional nonaqueous solvents, the exchange reactions of Li(I) between [Li·C211](+) and solvated Li(I) in N,N-dimethylformamide (DMF) and dimethyl sulfoxide (DMSO) were also examined. These Li(I) exchange reactions were found to be independent of the concentrations of the solvated Li(I) and hence proposed to proceed through the dissociative mechanism. Kinetic parameters [k(s)/s(-1) at 25 °C, ΔH(++)/(kJ mol(-1)), ΔS(++)/(J K(-1) mol(-1))] are as follows: 1.10 × 10(-2), 68.9 ± 0.2, and -51.3 ± 0.4 for the DMF system; 1.13×10(-2), 76.3 ± 0.3, and -26.3 ± 0.8 for the DMSO system. The differences in reactivities between ILs and nonaqueous solvents were proposed to be attributed to those in the chemical forms of the uncomplexed Li(I) species, i.e., the negatively charged species ([Li(X)(2)](-)) in ILs, and the positively charged ones ([Li(solvent)(n)](+)) in nonaqueous solvents.     

Nucleophilic displacement reactions in ionic liquids: substrate and solvent effect in the reaction of NaN(3) and KCN with alkyl halides and tosylates

Room-temperature ionic liquids have been used as environmentally benign solvents for the preparation of primary and secondary alkyl azides and nitriles under solid-RTIL phase-transfer conditions. The reaction of primary, secondary, and tertiary halides or tosylates with KCN and NaN(3) has been investigated in three ionic liquids ([bmim][PF(6)], [bmim][N(Tf)(2)], and [hpyr] [N(Tf)(2)]). The observed nucleofugacity scales for the reaction of NaN(3) are similar to those reported for the same process in cyclohexane, indicating that in these solvents it is possible to evidence the intrinsic ability to depart of leaving groups. Changes in the nature of the IL cation or anion determine significant modifications in reactivity of the investigated substrates. Reactivity has been interpreted considering a gradual shift of the mechanism from concerted S(N)2 (primary substrates) to stepwise S(N)1 (tertiary substrate, 3), through the nucleophilically assisted formation of an ion pair intermediate, in the case of 2d.     

Unusual Anions [LAl(SH)(S)]- and [LAl(S)2]2- stabilized by weakly coordinating imidazolium cations. synthesis of LAl(SSiMe2)2O (L = HC[C(Me)N(Ar)]2, Ar = 2,6-iPr2C6H3)

Deprotonation of an Al-SH moiety has been achieved easily by using N-heterocyclic carbene as the base. Monomeric mono- and bis-imidazolium salts [C(t)H(+)][LAl(SH)(S)](-) ([C(t)H(+)] = N,N'-bis-tert-butylimidazolium), [C(m)H(+)][LAl(SH)(S)](-), and [C(m)H(+)](2)[LAl(S)(2)](2-) ([C(m)H(+)] = N,N'-bismesitylimidazolium), containing unusual anions [LAl(SH)(S)](-) and [LAl(S)(2)](2-), have been synthesized in nearly quantitative yields. Furthermore, [C(m)H(+)](2)[LAl(S)(2)](2-) has been successfully used for the preparation of LAl(SSiMe(2))(2)O containing the [O(Me(2)SiS)(2)](2-) ligand.     

Structure, formation, and dynamics of Mo(12) and Mo(16) oxothiomolybdenum rings containing terephtalate derivatives

The influence of rigid or semirigid dicarboxylate anions, terephtalate (TerP(2-)), isophtalate (IsoP(2-)), and phenylenediacetate (PDA(2-)) on the self-condensation process of the [Mo(2)O(2)S(2)](2+) dioxothio cation has been investigated. Three new molybdenum rings, [Mo(12)O(12)S(12)(OH)(12)(TerP)](2-) ([Mo(12)TerP](2-)), [Mo(16)O(16)S(16)(OH)(16)(H(2)O)(4)(PDA)(2)](4-) ([Mo(16)(PDA)(2)](4-)), and [Mo(16)O(16)S(16)(OH)(16)(H(2)O)(2)(IsoP)(2)](4-) ([Mo(16)(IsoP)(2)](4-)) have been isolated and unambiguously characterized in the solid state by single-crystal X-ray studies and in solution by various NMR methods and especially by diffusion-correlated NMR ((1)H DOSY) spectroscopy, which was shown to be a powerful tool for the characterization and speciation of templated molybdenum ring systems in solution. Characterization by FT-IR and elemental analysis are also reported. The dynamic and thermodynamic properties of both the sixteen-membered rings were studied in aqueous medium. Specific and distinct behaviors were revealed for each system. The IsoP(2-)/[Mo(2)O(2)S(2)](2+) system gave rise to equilibrium, involving mono-templated [Mo(12)IsoP](2-) and bis-templated [Mo(16)(IsoP)(2)](4-) ions. Thermodynamic parameters have been determined and showed that the driving-force for the formation of the [Mo(16)(IsoP)(2)](4-) is entropically governed. However, whatever the conditions (temperature, proportion of reactants), the PDA(2-)/[Mo(2)O(2)S(2)](2+) system led only to a single compound, the [Mo(16)(PDA)(2)](4-) ion. The latter exhibits dynamic behavior, consistent with the gliding of both the stacked aromatic groups. Stability and dynamics of both Mo(16) rings was related to weak hydrophobic or pi-pi stacking inter-template interactions and inner hydrogen-bond network occurring within the [Mo(16)(IsoP)(2)](4-) and [Mo(16)(PDA)(2)](4-) ions.     

Homogeneous enzymatic reactions in ionic liquids with poly(ethylene glycol)-modified subtilisin

Subtilisin Carlsberg was covalently modified with comb-shaped poly(ethylene glycol) (PM13). PM13-modified subtilisin (PM13-Sub) was readily solubilized in three different ionic liquids (ILs), i.e., [Emim][Tf2N], [C2OC1mim][Tf2N] and [C2OHmim][Tf2N]. Analysis of homogeneous enzymatic reactions in the ILs revealed that PM13-Sub exhibited excellent catalytic performance while the native enzyme suspended in ILs showed no activity. Hydrophobicity of ILs slightly affected enzyme activity, and the relatively hydrophobic IL [Emim][Tf2N] was the preferred medium for enzymatic reactions, similar to enzymatic reactions in conventional organic solvents. Enzyme activity was much higher in [Emim][Tf2N] than in conventional organic solvents, and excellent activity was associated with unique properties of ILs such as hydrophobicity and high polarity. Furthermore, PM13-Sub showed good stability in [Emim][Tf2N], and maintained 80% of its initial activity after 60 h.     

微波辅助合成有机膦功能化离子液体及对稀土离子的萃取

用微波辐射法,合成了5个含有机膦氧基团的离子液体：1-丙基-3-(3-二苯基氧膦基)丙基咪唑双(三氟甲基磺酰基)亚胺盐([PImC3P(O)Ph2][Tf2N])、1-己基-3-(3-二苯基氧膦基)丙基咪唑双(三氟甲基磺酰基)亚胺盐([HImC3P(O)Ph2][Tf2N])、1-丙基-3-(3-苯基乙氧基氧膦基)丙基咪唑双(三氟甲基磺酰基)亚胺盐([PImC3P(O)Ph(OEt)][Tf2N])、1-己基-3-(3-苯基乙氧基氧膦基)丙基咪唑双(三氟甲基磺酰基)亚胺盐([HImC3P(O)Ph(OEt)][Tf2N])和(3-苯基乙氧基氧膦基)丙基三乙胺双(三氟甲基磺酰基)亚胺盐([TENC3P(O)Ph(OEt)][Tf2N])。 用31P NMR、1H NMR、13C NMR、MS及FT-IR对产物结构进行了表征。 研究了这类离子液体对稀土Nd(III)的萃取性能。 结果表明,这类功能化离子液体可作为单一组分萃取稀土而无需加入有机稀释剂,离子液体结构对萃取效率影响很大,相同条件下季铵盐型结构的离子液体[TENC3P(O)Ph(OEt)][Tf2N]对稀土Nd(Ⅲ)的萃取效率最高。 稀土溶液pH值对萃取效率影响显著,近中性条件下(pH=6.63),对稀土Nd(Ⅲ)的萃取率最高。 用pH=1.00的盐酸溶液可以较好的从离子液体相反萃Nd(Ⅲ),反萃率可达94%。     

Comparison of dansylated aminopropyl controlled pore glass solvated by molecular and ionic liquids

We compare how (i) four ionic liquids (ILs) (1-butyl-3-methylimidazolium tetrafluoroborate ([C4mim][BF4]), 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C4mim][Tf2N]), 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide ([C4mpy][Tf2N]), and trihexyltetradecylphosphonium bis(trifluoromethylsulfonyl)imide ([P(C6)3C14][Tf2N])) and (ii) two conventional molecular liquids (methanol and 1-octanol) solvate/wet luminescent organic moieties that are covalently attached to the surface of silica controlled pore glass (CPG). A series of aminopropyl CPG particles that have been covalently tagged with the solvatochromic fluorescent probe group dansyl were used in this study. The results demonstrate that ILs solvate/wet the silica surface differently in comparison to molecular liquids (MLs). Specifically, when comparing ILs and MLs that appear to solvate the free probe, dansylpropylsulfonamide (DPSA), equally in solution, we find that ILs do not solvate/wet the silica surfaces as well as the corresponding MLs. The cation component in these ILs is the significant factor in how the ILs solvate/wet silica surfaces. Solvation/wetting of surface-bound species at a silica surface depends on the cation size. Chlorosilane end-capping of the surface silanol and amine residues attenuates the cation's affects.     

Physicochemical properties and structures of room-temperature ionic liquids. 3. Variation of cationic structures

A series of room-temperature ionic liquids (RTILs) were prepared with different cationic structures, 1-butyl-3-methylimidazolium ([bmim]), 1-butylpyridinium ([bpy]), N-butyl-N-methylpyrrolidinium, ([bmpro]), and N-butyl-N,N,N-trimethylammonium ([(n-C(4)H(9))(CH(3))(3)N]) combined with an anion, bis(trifluoromethane sulfonyl)imide ([(CF(3)SO(2))(2)N]), and the thermal property, density, self-diffusion coefficients of the cation and anion, viscosity, and ionic conductivity were measured over a wide temperature range. The self-diffusion coefficient, viscosity, ionic conductivity, and molar conductivity follow the Vogel-Fulcher-Tamman equation for temperature dependencies, and the best-fit parameters have been estimated, together with the linear fitting parameters for the density. The relative cationic and anionic self-diffusion coefficients for the RTILs, independently determined by the pulsed-field-gradient spin-echo NMR method, appear to be influenced by the shape of the cationic structure. A definite order of the summation of the cationic and anionic diffusion coefficients for the RTILs: [bmim][(CF(3)SO(2))(2)N] > [bpy][(CF(3)SO(2))(2)N] > [bmpro][(CF(3)SO(2))(2)N] > [(n-C(4)H(9))(CH(3))(3)N][(CF(3)SO(2))(2)N], has been observed, which coincides with the reverse order to the viscosity data. The ratio of molar conductivity obtained from the impedance measurements to that calculated by the ionic diffusivity using the Nernst-Einstein equation quantifies the active ions contributing to ionic conduction in the diffusion components and follows the order: [bmpro][(CF(3)SO(2))(2)N] > [(n-C(4)H(9))(CH(3))(3)N][(CF(3)SO(2))(2)N] > [bpy][(CF(3)SO(2))(2)N] > [bmim][(CF(3)SO(2))(2)N] at 30 degrees C.     

A nitridoniobium(V) reagent that effects acid chloride to organic nitrile conversion: synthesis via heterodinuclear (Nb/Mo) dinitrogen cleavage, mechanistic insights, and recycling

The transformation of acid chlorides (RC(O)Cl) to organic nitriles (RC[triple bond]N) by the terminal niobium nitride anion [N[triple bond]Nb(N[Np]Ar)3]- ([1a-N]-, where Np = neopentyl and Ar = 3,5-Me2C6H3) via isovalent N for O(Cl) metathetical exchange is presented. Nitrido anion [1a-N]- is obtained in a heterodinuclear N2 scission reaction employing the molybdenum trisamide system, Mo(N[R]Ar)3 (R = t-Bu, 2a; R = Np, 2b), as a reaction partner. Reductive scission of the heterodinuclear bridging N2 complexes, (Ar[R]N)3Mo-(mu-N2)Nb(N[Np]Ar)3 (R = t-Bu, 3b; R = Np, 3c) with sodium amalgam provides 1 equiv each of the salt Na[1a-N] and neutral N[triple bond]Mo(N[R]Ar)3 (R = t-Bu, 2a-N; R = Np, 2b-N). Separation of 2-N from Na[1a-N] is readily achieved. Treatment of salt Na[1a-N] with acid chloride substrates in tetrahydrofuran (THF) furnishes the corresponding organic nitriles concomitant with the formation of NaCl and the oxo niobium complex O[triple bond]Nb(N[Np]Ar)3 (1a-O). Utilization of 15N-labeled 15N2 gas in this chemistry affords a series of 15N-labeled organic nitriles establishing the utility of anion [1a-N]- as a reagent for the 15N-labeling of organic molecules. Synthetic and computational studies on model niobium systems provide evidence for the intermediacy of both a linear acylimido and niobacyclobutene species along the pathway to organic nitrile formation. High-yield recycling of oxo 1a-O to a niobium triflate complex appropriate for heterodinuclear N2 scission has been developed. Specifically, addition of triflic anhydride (Tf2O, where Tf = SO2CF3) to an Et2O solution of 1a-O provides the bistriflate complex, Nb(OTf)2(N[Np]Ar)3 (1a-(OTf)2), in near quantitative yield. One-electron reduction of 1a-(OTf)2 with either cobaltocene (Cp2Co) or Mg(THF)3(anthracene) provided the monotriflato complex, Nb(OTf)(N[Np]Ar)3 (1a-(OTf)), which efficiently regenerates complexes 3b and 3c when treated with the molybdenum dinitrogen anions [N2Mo(N[t-Bu]Ar)3]- ([2a-N2]-) or [N2Mo(N[Np]Ar)3]- ([2b-N2]-), respectively.     

Photoinduced electron transfer reaction in room temperature ionic liquids: a combined laser flash photolysis and fluorescence study

A detailed study of the photoinduced electron transfer (PET) reaction between pyrene and N,N-dimethylaniline has been made in four different room temperature ionic liquids (ILs) using steady state and time-resolved fluorescence and laser flash photolysis techniques. Unlike that in the conventional media, no exciplex emission for this well-known system could be observed in ILs. The rate constants for the PET induced quenching of the fluorescent state of pyrene, which lie between 6.9 and 37 x 107 M-1 s-1 depending on the viscosity, are found to be 2-4 times higher than the diffusion-controlled rates in ILs. The primary photoproducts of the PET process have been characterized by transient absorption spectroscopy, and the yields of the solvent-separated PET products have been determined. Even in the least viscous IL, [emim][Tf2N], the yield of the solvent-separated radical ion is estimated to be only 0.015 +/- 0.005. In more viscous ILs such as [bmim][PF6], the yield is found to be so low that absorption due to these species could not be observed. The rate constant for the escape of the ionic products from the geminate ion pair in ILs has been estimated to be nearly 2-3 orders of magnitude lower than the back electron transfer rate. However, the small fraction of the PET products, which manage to escape geminate recombination, have been found to survive much longer compared to those in less viscous conventional solvents.     

Kemp elimination: a probe reaction to study ionic liquids properties

The amino induced elimination of benzisoxazole into the relevant o-cyanophenolate ion (Kemp elimination) has been studied in [bmim][BF 4] solution at 298 K. To have information about the interactions between reactants and ionic liquid, the reaction has been carried out at different temperatures (293-313 K). Several primary, secondary, and tertiary amines have been used to study the effect of amine structure on the reaction rate. The collected data show that the amine structure seems to have a crucial role in determining the reaction rate. Furthermore, as different cation or anion structures of an ionic liquid can significantly affect its properties, the title reaction has been performed in four different ionic liquids ([bmim][PF6], [bmim][NTf 2], [bm 2im][NTf 2], and [bmpyrr][NTf 2]), using pyrrolidine and piperidine as model amines. An H-donor negative solvent (MeOH and [bmim][NTf 2]) effect on reaction rate was detected. Finally, a narrow range of activation parameters was calculated both for the reaction induced by different amines and for pyrrolidine and piperidine, in the presence of different ILs. This fact suggests the occurrence of an "early" transition state.     

Ionic liquids of cationic sandwich complexes

Simple cationic sandwich complexes that contained alkyl- or halogen substituents provided ionic liquids (ILs) with the bis(perfluoroalkanesulfonyl)imide anion. Ferrocenium- and cobaltocenium ILs [M(C(5)H(4)R(1))(C(5)H(4)R(2))][Tf(2)N] (M=Fe, Co) and arene-ferrocenium ILs [Fe(C(5)H(4)R(1))(C(6)H(5)R(2))][Tf(2)N] were prepared and their physical properties were investigated. A detailed comparison of their thermal properties revealed the effects of molecular symmetry and substituents on their melting points. Their viscosity increased on increasing the length of the substituent on the cation and the perfluoroalkyl chain length on the anion. Upon cooling, ILs with low viscosities exhibited crystallization, whereas those with higher viscosities tended to exhibit glass transitions. Most of these salts showed phase transitions in the solid state. A magnetic-switching phenomenon was observed for the paramagnetic ferrocenium IL, which was associated with a liquid/solid transformation, based on the magnetic anisotropy of the ferrocenium cation. (57)Fe M?ssbauer spectroscopy was applied to [Fe(C(5)H(4)nBu)(2)][Tf(2)N] to investigate the vibrational behavior of the iron atom in the crystal and glassy states of the ferrocenium IL.     

Electrodeposition of nano- and microcrystalline aluminium in three different air and water stable ionic liquids.

The present work shows, for the first time, a comparative experimental study on the electrodeposition of aluminium in three different water and air stable ionic liquids, namely 1-butyl-1-methylpyrrolidinium-bis(trifluoromethylsulfonyl)imide ([BMP]Tf2N), 1-ethyl-3-methylimidazolium-bis(trifluoromethylsulfonyl)imide ([EMIm] Tf2N), and trihexyl-tetradecyl-phosphoniumbis(trifluoromethylsulfonyl)imide (P(14,6,6,6) Tf2N). The ionic liquids [BMP]Tf2N and [EMIm]Tf2N show biphasic behaviour in the AlCl3 concentration range from 1.6 to 2.5 mol L(-1) and 2.5 to 5 mol L(-1), respectively. The biphasic mixtures become monophasic at temperatures >/=80 degrees C. It was found that nanocrystalline aluminium can be electrodeposited in the ionic liquid [BMP]Tf2N saturated with AlCl3. The deposits obtained are generally uniform, dense, shining, and adherent with very fine crystallites in the nanometer size regime. However, coarse cubic-shaped aluminium particles in the micrometer range are obtained in the ionic liquid [EMIm]Tf2N. In this liquid the particle size significantly increases as the temperature rises. A very thin, mirrorlike aluminium film containing very fine crystallites of about 20 nm is obtained in the ionic liquid [trihexyl-tetradecyl-phosphonium]Tf(2)N at room temperature. At 150 degrees C, the average grain size is found to be 35 nm.     

Self-assembly of electroactive thiacrown ruthenium(II) complexes into hydrogen-bonded chain and tape networks

A family of coordination complexes has been synthesized, each comprising a ruthenium(II) center ligated by a thiacrown macrocycle, [9]aneS(3), [12]aneS(4), or [14]aneS(4), and a pair of cis-coordinated ligands, niotinamide (nic), isonicotinamide (isonic), or p-cyanobenzamide (cbza), that provide the complexes with peripherally situated amide groups capable of hydrogen bond formation. The complexes [Ru([9]aneS(3))(nic)(2)Cl]PF(6), 1(PF(6)); [Ru([9]aneS(3)) (isonic)(2)Cl]PF(6), 2(PF(6)); [Ru([12]aneS(4))(nic)(2)](PF(6))(2), 3(PF(6))(2); [Ru([12]aneS(4))(isonic)(2)](PF(6))(2), 4(PF(6))(2); [Ru([12]aneS(4)) (cbza)(2)](PF(6))(2), 5(PF(6))(2); [Ru([14]aneS(4))(nic)(2)](PF(6))(2), 6(PF(6))(2); [Ru([14]aneS(4))(isonic)(2)](PF(6))(2), 7(PF(6))(2); and [Ru([14]aneS(4))(cbza)(2)](PF(6))(2), 8(PF(6))(2) have been characterized by NMR spectroscopy, mass spectrometry, and elemental analysis. UV/visible spectroscopy shows that each complex exhibits an intense high-energy band (230-255 nm) assigned to a pi-pi* transition and a lower energy band (297-355 nm) assigned to metal-to-ligand charge-transfer transitions. Electrochemical studies indicate good reversibility for the oxidations of complexes with nic and isonic ligands (|I(a)/I(c)| = 1; DeltaEp < 100 mV), In contrast, complexes 5 and 8, which incorporate cbza ligands, display oxidations that are not fully electrochemically reversible (|I(a)/I(c)| = 1, DeltaEp > or = 100 mV). Metal-based oxidation couples between 1.32 and 1.93 V versus Ag/AgCl can be rationalized in term of the acceptor capabilities of the thiacrown ligands and the amide-bearing ligands, as well as the pi-donor capacity of the chloride ligands in compounds 1 and 2. The potential to use these electroactive metal complexes as building blocks for hydrogen-bonded crystalline materials has been explored. Crystal structures of compounds 1(PF(6)).H(2)O, 1(BF(4)).2H(2)O, 2(PF(6)), 3(PF(6))(2), 6(PF(6))(2)CH(3)NO(2), and 8(PF(6))(2) are reported. Four of the six form amide-amide N-H...O hydrogen bonds leading to networks constructed from amide C(4) chains or tapes containing R(2)(2) (8) hydrogen-bonded rings. The other two, 2(PF(6)) and 8(PF(6)), form networks linked through amide-anion N-H...F hydrogen bonds. The role of counterions and solvent in interrupting or augmenting direct amide-amide network propagation is explored, and the systematic relationship between the hydrogen-bonded networks formed across the series of structures is presented, showing the relationship between chain and tape arrangements and the progression from 1D to 2D networks. The scope for future systematic development of electroactive tectons into network materials is discussed.