Two-dimensional correlation gel permeation chromatography (2D GPC) study of the CH<Subscript>3</Subscript>SO<Subscript>3</Subscript>H-catalyzed polymerization of triethoxysilyl-terminated polystyrene. Molecular weight effect on the aggregate–aggregate interactions

The two-step polymerization process of two well-defined polymeric silane coupling agents, triethoxysilyl-terminated polystyrene with molecular weights equal to 2400 [TESi-PS (2400)] and 8000 [TESi-PS (8000)], catalyzed by 0.1 mol/kg CH₃SO₃H, was traced as a function of reaction time using gel-permeation chromatography (GPC). Two sets of GPC traces, collected during the condensation, were then converted to two-dimensional (2D) correlation spectra by using generalized 2D correlation theory. The 2D correlation spectra elucidated details of the aggregate–aggregate correlations [in particular, the difference between the correlations of TESi-PS (2400) and TESi-PS (8000)], thus demonstrating the effect of aggregation on the polymerization.     

P/RS intergrowth type phases in the Ln<Subscript>2</Subscript>O<Subscript>3</Subscript>–MO–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> systems

Regularities of formation of complex aluminates with structure of P/RS intergrowth type phases in the Ln₂O₃–MO–Al₂O₃ systems (Ln = rare-earth element, M = Mg, Ca, Sr, Ba) have been considered. Systematization of the data on formation of complex compounds coexisting with one-layer phases in the Ln₂O₃–MO–Al₂O₃ systems and analysis of geometry criteria of LnMAlO₄ stability is a promising approach to prediction of novel compounds with structure of Ruddlesden–Popper phase.     

Interaction in the systems TlBiSe<Subscript>2</Subscript>–Tl<Subscript>9</Subscript>BiSe<Subscript>6</Subscript>–PbSe and Tl<Subscript>9</Subscript>BiSe<Subscript>6</Subscript>–Tl<Subscript>4</Subscript>PbSe<Subscript>3</Subscript>–PbSe

Phase equilibria in the systems TlBiSe₂–Tl₉BiSe₆–PbSe and Tl₉BiSe₆–Tl₄PbSe₃–PbSe were studied by differential thermal, X-ray powder diffraction, and microstructural analyses. State diagrams of the quasi-binary sections Tl₉BiSe₆–Tl₄PbSe₃, TlBiSe₂–PbSe, and Tl₉BiSe₆–PbSe were constructed, and so were projections of liquidus surfaces and isothermal sections at 600 K for the secondary quasi-ternary systems TlBiSe₂–Tl₉BiSe₆–PbSe and Tl₄PbSe₃–Tl₉BiSe₆–PbSe. The coordinates of invariant points and the boundaries of solid solutions were determined.     

Phase transformations in the systems Ti<Subscript>2</Subscript>Fe–H<Subscript>2</Subscript> and Ti<Subscript>2</Subscript>Fe–NH<Subscript>3</Subscript>

The interactions of two-phase alloy Ti₂Fe with hydrogen and ammonia at 100–500°C were studied, the compositions of the products were found, and the conditions for producing hydride and nitride phases were determined. The potential of using the two-phase alloy in a metal hydride hydrogen accumulator operating at 20–600°C was considered.     

Ionic mobility and electrophysical properties of solid solutions in PbF<Subscript>2</Subscript>–SbF<Subscript>3</Subscript> and PbF<Subscript>2</Subscript>–SnF<Subscript>2</Subscript>–SbF<Subscript>3</Subscript> systems

Ionic mobility and electrical conductivity of solid solutions with fluorite structure, obtained with solid-state approach in PbF₂–SbF₃ and PbF₂–SnF₂–SbF₃ systems, are studied by 19F NMR and electrochemical impedance spectroscopy methods. The 19F NMR spectra parameters, types of ion motions in the fluoride sublattice, and the ionic conductivity magnitude are shown to be determined by the temperature and fluoride concentration in the solid solutions. The solid solution specific conductivity in the PbF₂–SbF₃ and PbF₂–SnF₂–SbF₃ systems at 420–450 K is as high as ~10^–2 S/cm, which allows accounting the solid solutions as a base for preparation of functional materials.     

Glass Formation in the Ternary System La<Subscript>2</Subscript>O<Subscript>3</Subscript>–As<Subscript>2</Subscript>S<Subscript>3</Subscript>–Er<Subscript>2</Subscript>O<Subscript>3</Subscript>

The boundaries of the glass formation region in the ternary system La₂O₃–As₂S₃–Er₂O₃ were found. Transparent glass of composition (La₂O₃)_0.03(As₂S₃)0.90(Er₂O₃)0.07 was studied by X-ray photoelectron and Raman spectroscopy. The intensities of the bands characterizing As–S, La–O, and Er–O bonds increased, and these bands were shifted toward higher energies. This was due to an increase in the covalence of these bonds and probably due to the formation of new bonds in the glasses. Samples in the glass formation region are resistant at 300 K to air, water, and organic solvents.     

NiTiO<Subscript>3</Subscript> nanoparticles encapsulated with SiO<Subscript>2</Subscript> prepared by sol–gel method

NiTiO₃ (NTO) nanoparticles encapsulated with SiO₂ were prepared by the sol–gel method resulting on core-shell structure. Changes on isoelectric point as a function of silica were evaluated by means of zeta potential. The NTO nanoparticles heat treated at 600°C were characterized by X-ray diffraction, transmission electron microscopy (TEM) and energy dispersive X-ray analysis. TEM observations showed that the mean size of NTO is in the range of 2.5–42.5 nm while the thickness of SiO₂ shell attained 1.5–3.5 nm approximately.     

Preparation of Ga<Subscript>2</Subscript>Se<Subscript>3</Subscript> thin films by sol–gel technique

In this study we describe the preparation of Ga₂Se₃ semiconductor compound thin films by sol–gel method for different crystal formation temperatures. The films were characterized by X-ray diffraction analyses (XRD), UV–visible spectrometer, and scanning electron microscope (SEM). The XRD spectrum showed that the formation of Ga₂Se₃ crystals were between 743 and 823 K. The thin film crystals that were formed at 773 K corresponded to the β phase and the preferred crystal structure was monoclinic. The value of band gap from optical absorption spectra for the Ga₂Se₃ thin films was estimated to be about E _g ~ 2.56 eV. The thickness of the one-coat Ga₂Se₃ thin films, which was measured by a Spectroscopic Ellipsometer, was about ~200 nm. The average grain sizes of scattered particles were within the limits between 200 and 500 nm.     

High-temperature reactions in the Co<Subscript>3</Subscript>Cr<Subscript>4</Subscript>(PO<Subscript>4</Subscript>)<Subscript>6</Subscript>–Cr(PO<Subscript>3</Subscript>)<Subscript>3</Subscript> system

A new dichromium(III) cobalt(II) diphosphate(V) of the formula CoCr₂(P₂O₇)₂ was detected in the Co₃Cr₄(PO₄)₆–Cr(PO₃)₃ system. The new compound was obtained as a result of high-temperature solid-state reactions between CoCO₃, Cr₂O₃ and (NH₄)₂HPO₄ as well as between Cr(PO₃)₃ and Co₃Cr₄(PO₄)₆. CoCr₂(P₂O₇)₂ was characterized using XRD, DTA and IR methods. Results demonstrated that CoCr₂(P₂O₇)₂ crystallizes in the triclinic system and its unit cell parameters were calculated. Its infrared spectrum was presented. CoCr₂(P₂O₇)₂ melts incongruently at 1270±10 °C with a formation of solid α-CrPO₄. The compound Co₃Cr₄(PO₄)₆, component of the system under study, was obtained for the first time as a pure phase. Its thermal stability was also investigated. Co₃Cr₄(PO₄)₆ is stable in air up to 1410 ± 20 °C.     

Catalytic properties of Fe/SiO<Subscript>2</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> systems,obtained via sol–gel method

The high efficacy of iron-containing catalysts based on SiO₂–Al₂O₃ systems obtained via sol–gel method in the oxidative destruction of carmoisine azo dye in aqueous solutions is demonstrated. It is found that the stability of the catalysts with respect to the leaching of iron ions into a solution during catalysis grows along with the aluminum content in the composition of aluminosilicate supports. It is concluded that the synthesized catalysts are promising materials for purifying wastewaters contaminated with organic dyes.     

Thermal studies of ZnO–B<Subscript>2</Subscript>O<Subscript>3</Subscript>–P<Subscript>2</Subscript>O<Subscript>5</Subscript>–TeO<Subscript>2</Subscript> glasses

The effect of TeO₂ additions on the thermal behaviour of zinc borophosphate glasses were studied in the compositional series (100 − x)[0.5ZnO–0.1B₂O₃–0.4P₂O₅]–xTeO₂ by differential scanning calorimetry, thermodilatometry and heating microscopy thermal analysis. The addition of TeO₂ to the starting borophosphate glass resulted in a linear increase of glass transition temperature and dilatometric softening temperature, whereas the thermal expansion coefficient decreased. Most of glasses crystallize under heating within the temperature range of 440–640 °C. The crystallization temperature steeply decreases with increasing TeO₂ content. The lowest tendency towards crystallization was observed for the glasses containing 50 and 60 mol% TeO₂. X-ray diffraction analysis showed that major compounds formed by annealing of the glasses were Zn₂P₂O₇, BPO₄ and α-TeO₂. Annealing of the powdered 50ZnO–10B₂O₃–40P₂O₅ glass leads at first to the formation of an unknown crystalline phase, which is gradually transformed to Zn₂P₂O₇ and BPO₄ during subsequent heating.     

Phase equilibria in the ternary systems NaCl–NaI–Na<Subscript>2</Subscript>CrO<Subscript>4</Subscript> and KCl–KI–K<Subscript>2</Subscript>CrO<Subscript>4</Subscript>

The ternary systems NaCl–NaI–Na₂CrO₄ and KCl–KI–K₂CrO₄ were studied by differential thermal analysis. In the systems, the melting points and compositions of alloys at ternary eutectic points were determined. The compositions of crystallizing phases in the eutectics were confirmed by X-ray powder diffraction analysis.     

Atmospheric control of gel-oxide transformation in sol–gel derived Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-Y<Subscript>2</Subscript>O<Subscript>3</Subscript> fibers

Via sol–gel processing metal–organic fibers were produced and dried up to 140 °C. For these gel fibers the influence of a treatment in different atmospheres was investigated for the temperature range of 200–850 °C. The atmospheres were nitrogen, water vapor, evaporated nitric and hydrochloric acid and evaporated hydrogen peroxide. In the presence of moisture and especially with acidic moisture fibers were transformed almost completely to their oxide composition (82 mol% Al₂O₃·18 mol% Y₂O₃). In these inorganic amorphous structures considerable differences were observed on several structural levels. On the atomic scale, the coordination of Al ions was investigated by ²⁷Al MAS NMR and skeletal density by He-pycnometry. Porosity in the nm scale was characterized by N₂-sorption. As a macroscopic effect of different treatment atmospheres, the longitudinal shrinkage was observed. For fibers treated at 500 °C the relative shrinkage varied by 100% (comparing water vapor and nitrogen atmosphere). No simple correlation between the release of organic constituents, the formation of porosity and the shrinkage could be found. These aspects were controlled by the rigidity of the inorganic network against atomic reconstitution. The kind of atmosphere was found to be an effective parameter to control various aspects of the xerogel structure.     

Structure and multiferroic properties of Bi<Subscript>5</Subscript>FeTi<Subscript>3</Subscript>O<Subscript>15</Subscript> thin films prepared by the sol–gel method

The Bi₅FeTi₃O₁₅ (BFTO) films of layered structure have been fabricated on Pt/Ti/SiO₂/Si substrates by the sol–gel method. The thermal decomposition behaviors of precursor powder were examined using thermo-gravimetric and differential scanning calorimeters analysis. The optimal heat treatment process for BFTO films were determined to be low-temperature drying at 200 °C for 4 min and high-temperature drying at 350 °C for 5 min followed by annealing at 740 °C for 60 min, which led to the formation of compact films with uniform grains of ~300 nm. The structural, surface topography, ferroelectric and magnetic properties of the films were investigated. The remnant polarization (2P _r) of BFTO thin films under an applied electric field of ~550 kV/cm are determined to be 67.5 μC/cm² . Meanwhile, the weak ferromagnetic properties of the BFTO films were observed at room temperature.     

Formation of solid solutions of multiferroics in the Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>–Nd<Subscript>2</Subscript>O<Subscript>3</Subscript>–Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> system

The sequence of phases appearance during the formation of Bi_1–xNd_xFeO₃ solid solutions in powder oxides mixtures of bismuth, neodymium, and iron has been determined. It has been shown that the closeness of the reaction mixture composition to that of the individual compound (BiFeO₃ or NdFeO₃) is essential for the realization of the series of phase transformations yielding solid solutions of multiferroics Bi_1–xNd_xFeO₃ as the final product, due to the prevalence of various interphase contacts in the starting reaction zone.     

Preparation of LiTaO<Subscript>3</Subscript> nanoparticles by a sol–gel route

A sol–gel route was developed to prepare pure ultrafine LiTaO₃ powders using Ta₂O₅, Li₂CO₃, citric acid (CA) as chelating agent, ethylene glycol (EG) as esterification agent and polyethylene glycol (PEG) as dispersant. The effects of pH value and heat treatment temperature of powder precursor on the synthesis of LiTaO₃ powders were investigated. The phase content and morphology of the final product were evaluated by XRD, SEM and TEM. A transparent gel was produced when heating a mixed-solution of CA, EG, Li and Ta ions with a molar ratio of [CA]:[EG]:[Li]:[Ta] = 3.0:6.0:1.0:1.0 and 2‰ PEG additions with a pH value of 7 at water bath temperature of 80 °C. The results showed that single phase LiTaO₃ powders with average particle sizes of nanometers were produced after heat treatment of the powder precursor at 650, 700, 800, and 900 °C respectively for 2 h.     

Separation of rare earth elements in the tributyl phosphate–Ln(NO<Subscript>3</Subscript>)<Subscript>3</Subscript>–Ca(NO<Subscript>3</Subscript>)<Subscript>2</Subscript> system in the counter current process

The 40-step extraction process to separate rare earth elements (RЕEs) according to the praseodymium–cerium line with the use of mixer–settler extractors in a 100% TBP–Ln(NO₃)₃–Ca(NO₃)₂ system is implemented. A lanthanum–cerium concentrate containing less than 0.03 wt % of the remaining REEs is obtained. The flow diagram of the separation process of a rare earth (RE) concentrate isolated from phosphogypsum is considered.     

Simulating equilibrium processes in the Ga(NO<Subscript>3</Subscript>)<Subscript>3</Subscript>–H<Subscript>2</Subscript>O–NaOH system

Equilibrium processes in the Ga(NO₃)₃–H₂O–NaOH system are simulated with allowance for the formation of precipitates of various compositions using experimental data from potentiometric titration and theoretical studies. The values of the instability constants are calculated along with the stoichiometric compositions of the resulting compounds. It is found that pH ranges of 1.0 to 4.3 and 12.0 to 14.0 are best for the deposition of gallium chalcogenide films.     

Phase formation in the system Li<Subscript>2</Subscript>MoO<Subscript>4</Subscript>–MgMoO<Subscript>4</Subscript>–Sc<Subscript>2</Subscript>(MoO<Subscript>4</Subscript>)<Subscript>3</Subscript>

Phase formation in the system Li₂MoO₄–MgMoO₄–Sc₂(MoO₄)₃ was studied by X-ray powder diffraction analysis and differential thermal analysis. Ternary molybdate LiMgSc(MoO₄)₃ was synthesized, which crystallizes in the triclinic system (space group P\(\bar 1\)). In the Li₂Mg₂(MoO₄)₃–Li₃Sc(MoO₄)₃ section, a continuous solid solution in the rhombic system was found to form (space group Pnma).