Role of gas cooling time on crystalline morphology and mechanical property of the HDPE parts prepared by gas-assisted injection molding

In this study, the hierarchical crystalline structures of high-density polyethylene (HDPE) samples molded by gas-assisted injection molding (GAIM) with different gas cooling times were characterized via scanning electron microscopy, two-dimensional wide-angle X-ray scattering, tensile testing techniques, and differential scanning calorimetry, respectively. It was found that the shish-kebab, the oriented lamellae, and common spherulite structures orderly distributed from the skin region to gas channel region of samples. More importantly, the wider area with highly oriented structure (shish-kebab) was obtained in the samples with longer gas cooling time, in that the longer gas cooling time tends to increase the cooling rate of polymer melt, and then much more stretched chains are retained. Although lower crystallinity, the higher degree of orientation, and much more shish-kebab structures lead to significant reinforcement from 28 to 785 MPa of the samples with gas cooling time of 0.5 s to 32 and 879 MPa of the samples with gas cooling time of 20 s for tensile strength and modulus, respectively. Finally, combined the HDPE molecular parameter with characteristic of the GAIM temperature field and flow field, the formation and stability of crystalline morphology in different regions of sample were discussed.     

Morphology and mechanical property of high-density polyethylene parts prepared by gas-assisted injection molding

The crystal morphology, melting behavior, and mechanical properties of high-density polyethylene (HDPE) samples obtained via gas-assisted injection molding (GAIM) under different gas pressures were investigated. Moreover, the non-isothermal crystallization kinetics of HDPE under different cooling rates was also studied. The obtained samples were characterized via differential scanning calorimetry, two-dimensional wide-angle X-ray scattering (2D-WAXS), tensile testing, dynamic mechanical analysis (DMA) and scanning electron microscopy techniques. It was found that the properties were intimately related to each other. Macroscopically, the flow-induced morphology of the various HDPE samples was characterized with a hierarchical crystalline structure, possessing oriented lamellar structure, shish?Ckebab structure, and common spherulites in the skin, sub-skin, and gas channel region, respectively. The 2D-WAXS results demonstrated that the degree of orientation of the high gas pressure sample was larger than that of the low pressure sample at the corresponding layer. The tensile testing results of GAIM parts showed that the mechanical properties of the GAIM parts were improved with an increase of the gas pressure. Furthermore, the DMA was utilized to obtain the dynamic mechanical properties of the GAIM samples, and the results indicated that significant improvement of the orientation was observed with an increase of the gas pressure.     

Hierarchical crystalline structures and dynamic mechanical properties of injection‐molded bars of HDPE: attributes of temperature field

The relationship among the processing parameters, crystalline morphologies and mechanical properties of injected‐molded bar becomes much complicated primarily due to the existence of temperature gradient coupled with the shear gradient along the sample thickness. The effect of thermal gradient field on the microstructural evolution, hierarchical structures and dynamic mechanical properties of high‐density polyethylene parts molded via gas‐assisted injection molding (GAIM) were investigated using scanning electron microscope, differential scanning calorimetry, dynamic mechanical analysis and two‐dimensional wide‐angle X‐ray diffraction. The three‐dimensional temperature profiles during the cooling stage under different melt temperatures of GAIM process were obtained by using a transient heat transfer model of the enthalpy transformation approach, and the phase‐change plateaus were clearly observed in the cooling curves. It was found that a variety of melt temperatures could induce considerable variations of the hierarchical structures, orientation behavior and dynamic mechanical properties of the injection‐molded bars. With reduced melt temperature, GAIM samples with higher molecular orientation and improved dynamic mechanical properties were obtained. Copyright © 2013 John Wiley & Sons, Ltd.     

Altering the hierarchical morphology distribution of injection molded polyethylene by the introduction of crosslink network and periodical shear

High density polyethylene (HDPE) with moderate content of crosslink network (CPE) was successfully prepared through chemical method. Specimens for structural characterization have been molded by conventional injection molding (CIM) and pressure vibration injection molding (PVIM). Influence of crosslink network on hierarchical morphology distribution and mechanical properties was systematically studied. Polarized light microscopy (PLM) revealed that both CIM and PVIM PE samples have a typical “skin-core” structure and the thickness of shear layer of CIM PE and PVIM CPE samples obviously increase. Scanning electron microscopy (SEM) showed that shish-kebab structures are clearly observed in shear layer of CIM CPE sample, indicating that the crosslink network can surely improve the formation of shish-kebab structures. Moreover, we suppose that shish-kebab structures emerged in shear and core layer of PVIM CPE sample. Wideangle X-ray diffraction (WAXD) and small-angle X-ray scattering (SAXS) confirmed that more orientation and shish-kebab structures form even in core layer of PVIM CPE sample, which demonstrated that the hierarchical morphology was apparently altered by periodical shear and crosslink network. Finally, the mechanical properties revealed that this oriented structure increase the tensile strength from 31 MPa of CIM PE sample to 46 MPa of PVIM CPE sample. However, the tensile behavior tended to change from ductile fracture to brittle fracture.     

Morphology evolution and crystalline structure of controlled‐rheology polypropylene in micro‐injection molding

In this paper, the microstructural evolution of controlled‐rheology polypropylene (CRPP) with different melt viscoelasticities was investigated by polarized optical microscopy, scanning electronic microscopy, differential scanning calorimeter, and wide‐angle X‐ray diffraction. It is found that a typical “skin‐core” structure formed in CRPP microparts and the thickness of oriented layer of CRPP microparts decreases notably with the addition of peroxide. The thickness of oriented layer and the distribution of different layers strongly depend on the melt flow properties and the corresponding relaxation time (λ). Furthermore, the mechanisms of the suppressed formation of oriented layers during the micro‐injection molding process are discussed mainly from the viewpoint of rheology and thermodynamics. It is revealed that the shear‐induced orientation is one of the key factors for the formation of oriented molecular structure (row nuclei). The final thickness of the oriented layer is the result of the competition between the orientation behavior and the disorientation behavior. Copyright © 2015 John Wiley & Sons, Ltd.     

The effect of shear on mechanical properties and orientation of HDPE/mica composites obtained via dynamic packing injection molding (DPIM)

The interfacial interaction and orientation of filler play important roles in the enhancement of mechanical performances for polymer/inorganic filler composites. Shear has been found to be a very effective way for the enhancement of interfacial interaction and orientation. In this work, we will report our recent efforts on exploring the development of microstructure of high density polyethylene (HDPE)/mica composites in the injection‐molded bars obtained by so‐called dynamic packing injection molding (DPIM), which imposed oscillatory shear on the melt during the solidification stage. The mechanical properties were evaluated by tensile testing and dynamic mechanical analysis (DMA), and the crystal morphology, orientation, and the dispersion of mica were characterized by scanning electron microscopy and two‐dimensional wide‐angle X‐ray scattering. Compared with conventional injection molding, DPIM caused an obvious increase in orientation for both HDPE and mica. More importantly, better dispersion and epitaxial crystallization of HDPE was observed on the edge of the mica in the injection‐molded bar. As a result, increased tensile strength and modulus were obtained, accompanied with a decrease of elongation at break. The obtained data were treated by Halpin–Tsai model, and it turned out that this model could be also used to predict the stiffness of oriented polymer/filler composites. Copyright © 2009 John Wiley & Sons, Ltd.     

Effect of ammonium polyphosphate and fillers on flame retardant and mechanical properties of recycled PET injection molded

Ammonium polyphosphate (APP) and inorganic fillers were applied for improving flame retardancy and mechanical performance of recycled poly(ethylene terephthalate) (RPET). RPET was compounded with 5–10 wt% of talc and glass bead using twin screw extruder then were injection molded with 2 wt% of APP. The effects of fillers contents and APP on properties and flame retardancy of RPET composites were investigated. The incorporation of talc and glass bead as well as the adding of APP significantly improved tensile and flexural modulus of RPET composites. Scanning electron microscope micrographs indicated good distribution of talc, while glass bead was agglomerated on the RPET matrix. Flame‐retardant property of neat RPET and the RPET composites revealed V‐2 of UL‐94 flammability rating. It can be noted that the composites were less dripping because of the synergistic effect of adding talc and glass bead with APP. From thermogravimetric analysis results, larger of residual char contents and lower values of the activation energy were considered for enhancing flame retardancy in the RPET composites. Copyright © 2015 John Wiley & Sons, Ltd.     

Morphological comparison of isotactic polypropylene parts prepared by micro‐injection molding and conventional injection molding

The morphological feature of microparts evolved during micro‐injection molding may differ from that of the macroparts prepared by conventional injection molding, resulting in specific physical properties. In this study, isotactic polypropylene (iPP) microparts with 200 µm thickness and macroparts with 2000 µm thickness were prepared, and their morphological comparison was investigated by means of polarized light microscopy (PLM), scanning electron microscopy (SEM), differential scanning calorimeter (DSC), and wide‐angle X‐ray diffraction (WAXD). The results presented some similarities and differences. PLM observations showed that the through‐the thickness‐morphology of micropart exhibited a similar “skin–core” structure as macropart, but presented a large fraction of shear layer in comparison to the macropart which presented a large fraction of core layer. The SEM observation of shear layer of micropart featured highly oriented shish‐kebab structure. The micropart had a more homogeneous distribution of lamellae thickness. The degree of crystallinity of the micropart was found to be higher than that of the macropart. High content of β‐crystal was found in micropart. The 2D WAXD pattern of the core layer of macropart showed full Debye rings indicating a random orientation, while the arcing of the shear layer indicates a pronounced orientation. The most pronounced arcing of the micropart indicates the most pronounced orientation of iPP chains within lamellae. Copyright © 2011 John Wiley & Sons, Ltd.     

Influence of scale effect and injection speed on morphology and structure of the microinjection molded isotactic polypropylene parts

The morphology and microstructure as well as their forming mechanism of the parts in microinjection molding process are critical. In this work, the coupling effect of scale factor and injection speed on the morphology of the microparts was systematically investigated. Neat isotactic polypropylene parts with thicknesses of 1 mm, 200 μm, and 100 μm were molded at different injection speeds. Polarized light microscope and wide‐angle X‐ray diffraction were used to inspect the microstructures along the sample thickness. In this way, three kinds of typical morphology were observed in the parts, including typical skin‐core structure for the parts with the thickness of 1 mm, noncore shear layer structure for the parts with the thickness of 200 μm, and special skin‐core structure with large fraction of columnar crystal for the parts with the thickness of 100 μm. Most interestingly, it was intuitively and straightforward found that the wall slip occurs when the injection speed exceeds a certain value. Specifically, opposite morphological change trend can be obtained when the parts were molded at different levels of injection speeds. Based on these experimental observations, the formation mechanism was proposed to interpret the morphological evolution. Our work provides a new insight for better understanding the morphology evolution mechanism for microinjection molding parts.     

Conductive polyethylene-carbon black composites by elongational-flow injection molding Part 3. Study of the structure and morphology

The morphology and structure of high molecular weight linear polyethylene (M _w 450000) filled with carbon black and processed using molds that introduce an elongational flow component during injection molding has been examined using electron microscopy and x-ray diffraction techniques. The study of fracture surfaces reveals the display of shish-kebabs oriented along the injection direction with segregated longitudinal channels of carbon black particles. Molecular and lamellar changes in orientation are, furthermore, studied across the thickness of the moldings. It is shown that addition of carbon black particles to injection-molded polyethylene induces significant changes in lamellar orientation. Thus, while lamellar overgrowth proceeds perpendicular to the fiber axes within carbon free channels, lamellae grow randomly within carbon-enriched regions where flow is less pronounced.     

Role of dicumyl peroxide on the morphology and mechanical performance of polypropylene random copolymer in microinjection molding

The purpose of this work is to systematically investigate the effects of dicumyl peroxide (DCP) on the microstructural evolution and mechanical properties of polypropylene random copolymers (PPRs) during the microinjection process. Polarized light microscopy, differential scanning calorimetry, X‐ray diffraction, and scanning electronic microscopy measurements were employed to characterize the morphology evolution of the PPR microparts with DCP. A hierarchical structure was found in the PPR microparts with DCP. Specifically, with the individual addition of organic peroxide, the orientation parameter of the PPR microparts decreased pronouncedly and the formation of skin layer was suppressed, while the formation of core layer was promoted. This was ascribed to the distribution of shear rate in the microchannel, which was determined by the wall ship effect in the filling stage and the relaxation behavior in the cooling stage. A mechanism was proposed to explain the distinctive filling behavior and molding characteristics of PPR with DCP in microinjection molding.     

The synergetic effect of phenylphosphonic acid zinc and microfibrillated cellulose on the injection molding cycle time of PLA composites

This study evaluates the effects of nucleants phenylphosphonic acid zinc (PPA-Zn) and talc, mold temperature, and microfibrillated cellulose (MFC) reinforcement in the acceleration of injection molding cycle of polylactic acid (PLA). PLA was dissolved in an organic solvent, mixed with nucleant and MFC, and dried compounds were injection molded into molds at temperatures ranging from 40 °C to 95 °C and holding times from 10 s to 120 s. Our results showed that PPA-Zn is more effective nucleating agent compared to talc. The addition of 1 wt% PPA-Zn and the mold temperature of 95 °C exhibited the fastest crystallization rates for the molded PLA, however, at this temperature the parts could not be quickly ejected without distortion. Addition of 10 wt% MFC increased the stiffness of PLA at high temperatures and allowed ejection of parts without distortion at a holding time of just 10 s. At this holding time, the crystallinity of the PLA composite was 15.3% but the storage modulus above T _g was superior to that of fully crystallized neat PLA due to MFC reinforcement, retaining the shape of the molded part during demolding. The mechanical properties of the composite at room temperature were also higher than those of fully crystallized neat PLA.     

On the difference in material structure and fatigue properties of nylon specimens produced by injection molding and selective laser sintering

This paper describes the influence of dynamic tension/compression loading on notched and unnotched nylon specimens fabricated by Injection Molding (IM) and Selective Laser Sintering (SLS). The main objective of this work is to analyze and describe the differences in material structure and fatigue properties of as-built nylon parts produced by IM and SLM from the same polyamide 12 powder. The differences in dimensional quality, density, surface roughness, crystal structure and crystallinity are systematically measured and linked to the mechanical fatigue properties. The fatigue properties of the unnotched SLS specimens are found to be equal to those of the unnotched IM specimens. The presence of pores in the sintered samples does not lead to rapid failure, and the microvoid coalescence failure mechanism is delayed. The notched specimens show more brittle failure and increased fatigue resistance which is caused by local notch-strengthening. The results enable improved understanding of the difference in material structure and fatigue behavior of selective laser sintered and injection molded polyamide.     

Annealing induced variation of crystalline structure and mechanical properties of syndiotactic polypropylene fibers

<正>Syndiotactic polypropylene(sPP) as-spun fiber(sPP1) and drawn fiber(sPP2) were prepared by melt-spinning and melt-spinning/hot-drawing,respectively.The structure transition of the two fibers induced by annealing at different temperatures and the corresponding mechanical properties were subsequently investigated by the combination of Fourier transform infrared spectroscopy(FTIR),wide-angle X-ray diffraction(WAXD) and tensile testing.The results indicate that the chain conformation and crystal forms of the two sPP fibers are not obviously changed at low annealing temperature (40℃).With increasing the annealing temperature,the trans-planar conformation and mesophase in sPP1 and sPP2 fibers can be completely transformed to helical conformation and crystal form I under tension.Upon removing the tension,a small amount of mesophase and trans-planar conformation will be regained.The mechanical properties of the annealed fibers are manifestly dependent on their initial structure and the annealing temperature.     

Morphology and mechanical behavior of isotactic polypropylene with different stereo‐defect distribution in injection molding

Large amount of work has been published on the isotacticity–properties relationship of isotactic polypropylene (iPP). However, the stereo‐defect distribution dependence of morphology and mechanical properties of iPP injection molding samples is still not clear. In this study, two different isotactic polypropylene (iPP) resins (PP‐A and PP‐B) with similar average isotacticity but different stereo‐defect distribution were selected to investigate the morphology evolution and mechanical properties (tensile and notching) of their injection molding samples using differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), 2D wide angle X‐ray diffraction (2D‐WAXD), and scanning electron microscope (SEM). The results of DMA showed that the molecular movement ability of PP‐A (with less uniform distribution of stereo‐defect) was stronger than that of PP‐B, meanwhile the analysis of DSC and SEM suggested that after injection molding, smaller spherullites, and crystals with higher perfection had formed in the specimens of PP‐A. The resulting of tensile properties of PP‐A were found to be better than that of PP‐B. The results of morphology evolution by SEM observation and 2D‐WAXD showed that PP‐A is more likely to occur interspherulite deformation and can disperse the tensile stress more efficiently, and therefore, its crystal structure can withstand a greater force when tensile stress is applied. On the other hand, PP‐B has larger spherulites and boundaries, and low perfection of lamellaes, and the intraspherulte deformation tend to take place. It is easier for the crystal of PP‐B to be broken up and reoriented along the tensile direction. Copyright © 2014 John Wiley & Sons, Ltd.     

Effects of stereo-defect distribution on the crystalline morphology and tensile behavior of isotactic polypropylene prepared by compression molding process

In this study, the aggregation morphology, tensile behavior, and morphology evolution during the tensile test of two isotactic polypropylene (iPP) samples with similar molecular weight and average isotacticity but different uniformities of stereo-defect distribution are investigated by differential scanning calorimetry (DSC), two-dimensional wide angle X-ray diffraction (2D-WAXD), and scanning electronic microscopy (SEM). The results revealed that the uniformity of stereo-defect distribution of iPP determines the crystalline structure and aggregation morphology, and further influences the tensile behavior and morphology evolution during the tensile test. For PP-A with less uniform stereo-defect distribution, its ability of crystallization is stronger compared with PP-B, resulting in smaller spherulite sizes, higher melting point and degree of crystallinity, and narrower distribution of lamellar thickness of the compression molding specimens. During the tensile test, mainly the inter-spherulite deformation takes place at the early stage for deformation, which further results in drastic deformation of lamellar and high degree of reorientation at the strain increases, exhibiting higher yield strength and elastic modulus, and lower elongation at break compared with PP-B; for PP-B with more uniform stereo-defect distribution, larger spherulite sizes, lower melting point and degree of crystallinity in its compression molding sample are observed. During the tensile test, intra-spherulite deformation mainly takes place, which can disperse the tensile stress more uniformly. As the strain increases, lower degree of crystalline destruction and reorientation of the crystallites take place. The yield strength and elastic modulus of PP-B is lower than PP-A, and its elongation at break is higher.     

Influence of pineapple leaf fiber and it's surface treatment on molecular orientation in,and mechanical properties of,injection molded nylon composites

The objective of his work is to show that pineapple leaf fiber (PALF) can be used successfully to reinforce a high melting polymer such as nylon. One of the most important barriers to the utilization of lignocellulosic materials in polymer matrix composites is their limited temperature resistance. As a consequence, they are mostly used to reinforce low melting temperature polymers such as polyethylene and polypropylene as well as polystyrene. However, this work reveals that PALF can be used to reinforce nylon. This is because of its very low lignin content. Nylon 6/66 composites containing a fixed amount of 20 wt % PALF in the form of short and fine fibers were prepared with a laboratory twin screw extruder and then injection molded. The mechanical properties of three types of PALF, i.e. untreated, alkaline- and silane-treated, were studied. Significant improvements in modulus and heat distortion temperature were obtained. The crystalline structure and orientation in the injected composites were investigated with synchrotron wide angle x-ray scattering (WAXS). It was found that both PALF and nylon crystallites oriented well along the flow direction and this is the key factor for the improvements observed.     

Principles of hierarchical meso- and macropore architectures by liquid crystalline and polymer colloid templating

The generation of porous silica with hierarchically organized bimodal mesoporosity of adjustable size and well-defined shape was investigated by using surfactant mixtures and the nanocasting procedure (liquid crystalline templating). A systematic study of combinations of various block copolymers (Pluronics F127, KLE (poly(omega-hydroxypoly(ethylene-co-butylene)-co-poly(ethylene oxide))) and SE (PS-co-PEO)) with smaller surfactants (Pluronics P123, C16mimCl, and CTAB) revealed that hierarchical bimodal mesopore architectures could only be obtained by the usage of block copolymers with a strong hydrophilic-hydrophobic contrast, such as KLE and SE, giving rise to pores between 6 and 22 nm. Furthermore, the ionic liquid (IL) C16mimCl appeared to have advantageous templating properties, resulting in 2-3-nm pores being located between the block copolymer mesopores, whereas phase separation was observed for Pluronics and CTAB as small templates. Thereby, the study provided also general insights into the mixing and co-self-assembly behavior of block copolymers and ionic surfactants in water and confirmed the special templating properties of ILs, as recently proposed. In addition to the bimodal mesoporosity, additional tunable macroporosity was created by the presence of poly(styrene) or poly(methyl methacrylate) spheres, leading to well-defined trimodal hierarchical pore architectures with the small pores being located in the walls of the respective larger pores. As a major improvement, due to the pore hierarchy, these large-pore materials showed relatively large surface areas and pore volumes, and the size of densely packed macropores could even be decreased down to 90 nm. The materials were characterized by electron microscopy, small-angle X-ray scattering, and nitrogen sorption using a proper NLDFT (nonlocal density functional theory) approach for calculations of the pore size distribution in the entire range of micro- and mesopores.