Convenient Synthesis of Julolidines Using Benzotriazole Methodology

Reaction of N,N-bis[(benzotriazol-1-yl)methyl]aniline (2) with 1-vinylpyrrolidin-2-one gives a mixture of diastereomeric 1,7-bis(2-oxopyrrolidin-1-yl)julolidines 3. After reduction of 3 with LAH, the predominant trans diastereomer of 1,7-di(pyrrolidin-1-yl)julolidine (4) is separated. Reaction of 2 with ethyl vinyl ether yields predominantly trans-1,7-di(benzotriazol-1-yl)julolidine (11). Stepwise synthesis from tetrahydroquinoline 15 gives access to julolidines with two different substituents on C-1 and C-7. Reaction of 1-[(benzotriazol-1-yl)methyl]-1,2,3,4-tetrahydroquinoline (25) with enolizable aldehydes gives a mixture of tetrahydroquinolines 26-29 which are converted into single julolidine products upon treatment with sodium hydride, LAH, or phenylmagnesium bromide. Reactions of 1,2,3,4-tetrahydroquinolines with benzotriazole and 2 molar equiv of enolizable aldehydes gives 1,2,3-trisubstituted julolidines 38-41, which with lithium aluminum hydride, sodium hydride, or a Grignard reagent produce single diastereomers of products 42, 43, and 45, respectively.     

Novel and convenient routes to substituted pyrroles and imidazoles

S-Melhyl N-(benzotriazol-1-ylmethyl)thioimidate 6 is obtained by lithiation of the corresponding N-(benzotriazol-1-ylmelhyl) thioamide 5 and subsequent reaction with methyl iodide. Derivative 6 undergoes [2 + 3] cycloaddition reactions with ,β-unsaturated -esters, -ketones and -nitriles, and vinylpyridines which are followed by elimination of benzotriazole and the thioalkoxy group, to give 2,3,4-trisubstituted pyrroles. Lithiaiion of 6 followed by reactions with imines gives cyclized 4,5-dihydroimidazoles 14 which upon further treatment with ZnBr₂ or direct refluxing in toluene yield the 1,25-trisubstituted imidazoles 15 in good yields.     

Methyl β-(Benzotriazol-l-yl) vinyl Ketone: A New p-Acetylvinyl Cation Equivalent

A simple and efficient two-step approach to methyl β-(benzotriazol-1-yl)vinyl ketone 7 is described. The synthetic utility of compound 7 has been demonstrated by nucleophilic substitutions of the benzotriazolyl group with a range of nucleophiles. Thus, methyl β-(benzotriazol-1-yl)vinyl ketone provides a new β-acetylvinyl cation equivalent.     

Preparation of 1,5-disubstituted pyrrolidin-2-ones

1,5-Disubstituted pyrrolidin-2-ones 18a-g, 19a-h, and 20a-f were synthesized in good to excellent yields via the nucleophilic substitution of 5-(benzotriazol-1-yl)-1-substituted-pyrrolidin-2-ones 9 with allylsilanes, organozinc reagents, and phosphorus compounds. Compounds 9 and 5-(benzotriazol-2-yl)-1-substituted-pyrrolidin-2-one isomers 10 are readily prepared in total 70-84% yields from 2, 5-dimethoxy-2,5-dihydrofuran (7), primary amines 8, and benzotriazole; 9 and 10 react identically with nucleophiles.     

Luminescent heteroleptic copper(I) complexes with polydentate benzotriazolyl-based ligands

Transition Metal Chemistry - Bis(benzotriazol-1-yl)phenylmethane CHPh(btz)2 and tris(benzotriazol-1-yl)methane CH(btz)3 were used as N-donor ligands to prepare luminescent heteroleptic copper(I)...     

Solid-phase synthesis of 1,2,5-trisubstituted 4-imidazolidinones

An efficient method for the preparation of 1,2,5-trisubstituted 4-imidazolidinones is presented. The synthetic approach is based on the formation of an N-[1-(benzotriazol-1-yl)alkyl] moiety on the amino group of a MBHA resin-bound amino acid. The nucleophilic substitution of the benzotriazole group with an amidic nitrogen results in the formation of a five-membered imidazolidinone ring. The reaction is nonstereospecific and produces diastereomers in ratios that vary depending on the substituents on the ring. A variety of N-alpha-alkylated amino acids were cyclized with aromatic, aliphatic, and heterocyclic aldehydes to determine optimal reaction conditions and to select building blocks for the future preparation of a large, diverse range of individual trisubstituted imidazolidinones as well as a mixture-based combinatorial library.     

Kinetics,catalysis, and mechanism of isomerization of N-[(benzotriazol-1-yl)methyl]anilines into the benzotriazol-2-yl derivatives

The ¹H NMR technique was applied for the measurement of the isomerization rates of N-ethyl-N-[(benzotriazol-1-yl)methyl]aniline ( 4 ) and 4-butyl-N-[(benzotriazol-1-yl)methyl]aniline ( 7 ) to the corresponding benzotriazol-2-yl isomers in dioxane-d₈ at 35°C. The rate constants obtained for pure dioxane-d₈ were 1.62 and 0.28 h^?1 for 4 and 7 , respectively. For both compounds, addition to acetic acid to the dioxane solutions accelerated the isomerizations whereas addition of triethylamine retarded it strongly. Addition of water slowed the isomerization of 4 but accelerated that of 7 : the different effects operating in the two cases are discussed and rationalized. © 1995 John Wiley & Sons, Inc.     

Nucleophilic substitution in 4-bromo-5-nitrophthalodinitrile: VIII. Synthesis of 4-(benzotriazol-1-yl)-5-[4-(1-methyl-1-phenylethyl)phenoxy]phthalodinitrile and phthalocyanines on its basis

Nucleophilic aromatic substitution of the bromine atom in 4-bromo-5-nitrophthalodinitrile by a 2-aminophenylamine residue followed by conversion of the resulting compound to 4-(1-benzothiazol-1-yl)-5-nitrophthalodinitrile and nucleophilic substitution of the nitro group by a 4-(1-methyl-1-phenylethyl)-phenoxy group gave 4-(benzotriazol-1-yl)-5-[4-(1-methyl-1-phenylethyl)phenoxy]phthalodinitrile. The latter product was reacted with certain metal acetates and chlorides to obtain the corresponding metal complexes of octasubstituted phthalocyanines. Spectral properties of the complexes were studied.     

Asymmetric and nonasymmetric addition of RLi and RMgX to 3-methoxynaphthalen-2-yl oxazolines and imines. An approach to substituted 2-tetralones

Chiral and achiral 3-methoxynaphthalen-2-yl oxazolines 4a,b failed to undergo an aromatic nucleophilic displacement of the 3-methoxy group with organolithium reagents and instead afforded dihydronaphthalenes 9 and 14 in 30-95% yield. Dihydronaphthalenes 9 (racemic) and 14 (nonracemic) were easily converted into the corresponding aldehydes 15. Alternatively, aldehydes 15 were prepared via tandem addition of Grignard reagents to imines 17 in 50-65% yield. Aldehydes 15 served as precursors to 3,3, 4-trisubstituted 2-tetralones 16. Use of methyl chloroformate to trap the azaenolate derived from 17f and i-PrMgCl afforded, in 65% yield, a versatile synthetic intermediate 23 which may serve to access 4-alkyl-, 3,4-dialkyl-, 3,4-disubstituted and 3,3, 4-trisubstituted 2-tetralones with diverse substitution patterns.     

O6-(benzotriazol-1-yl)inosine derivatives: easily synthesized, reactive nucleosides

A novel class of O6-(benzotriazol-1-yl)inosine as well as the corresponding 2'-deoxy derivatives can be conveniently prepared by a reaction between sugar-protected or -unprotected inosine or 2'-deoxyinosine nucleosides and 1H-benzotriazol-1-yloxy-tris(dimethylamino)phosphonium hexafluorophosphate (BOP). The reaction appears to proceed via a nucleoside phosphonium salt, and in the absence of any additional nucleophile, the released 1-hydroxybenzotriazole undergoes reaction with the formed phosphonium salt leading to the requisite O6-(benzotriazol-1-yl)inosine or 2'-deoxyinosine derivatives. Isolation and characterization of the phosphonium salt as well as analysis by 31P{1H} NMR appear to be consistent with this reaction pathway. The resulting O6-(benzotriazol-1-yl)inosine derivatives are effective as electrophilic nucleosides, undergoing facile reactions with a variety of nucleophiles such as alcohols, phenols, amines, and a thiol. Unusual and challenging nucleoside derivatives such as an aryl-bridged dimer, a nucleoside-amino acid conjugate, and a nucleoside-nucleoside dimer have also been synthesized from the O6-(benzotriazol-1-yl)-2'-deoxyinosine derivative. Finally, a fully protected DNA building block, the O6-(benzotriazol-1-yl)-2'-deoxyinosine 5'-O-DMT 3'-O-phosphoramidite, has been prepared and a preliminary evaluation of its use for DNA modification has been performed. Results from these studies indicate several important facts: A single, simple methodological approach provides a class of stable, isolable ribo and 2'-deoxyribonucleoside derivatives that possess excellent reactivity for SNAr chemistry with a wide range of nucleophiles. Also, a benzotriazolyl nucleoside phosphoramidite appears to be a suitable reagent for incorporation into DNA for purposes of site-specific DNA modification.     

Synthesis of 3-(Benzotriazol-1-yl)naphthoquinone Derivatives

2,3-Bis(benzotriazol-1-yl)-1,4-naphthoquinone reacts with aliphatic and aromatic amines to give the corresponding 2-amino-3-(benzotriazol-1yl)-1,4-naphthoquinones, and its reaction with alkali gives 2-hydroxy-3-(benzotriazol-1-yl)-1,4-naphthoquinone.     

Unusual deoxygenation and reactivity studies related to O6-(benzotriazol-1-yl)inosine derivatives

New and unusual developments related to the chemistry of O6-(benzotriazol-1-yl)inosine derivatives are reported. First, a simple, scalable method for their syntheses via the use of PPh3/I2/HOBt has been developed and has been mechanistically investigated by 31P(1H) NMR. Studies were then conducted into a unique oxygen transfer reaction between O6-(benzotriazol-1-yl)inosine nucleosides and bis(pinacolato)diboron (pinB-Bpin) leading to the formation of C-6 (benzotriazol-1-yl)purine nucleoside derivatives and pinB-O-Bpin. This reaction has been investigated by 11B(1H) NMR and compared to pinB-O-Bpin obtained by oxidation of pinB-Bpin. The structures of the C-6 (benzotriazol-1-yl)purine nucleosides have been unequivocally established via Pd-mediated C-N bond formation between bromo purine nucleosides and 1H-benzotriazole. Finally, short and extremely simple synthesis of 1,N6-ethano- and 1,N6-propano-2'-deoxyadenosine are reported in order to demonstrate the synthetic versatility of the O6-(benzotriazol-1-yl)inosine nucleoside derivatives for the assembly of relatively complex compounds.     

A novel approach to substituted 2H-azirines

2-(Benzotriazol-1-yl)-2H-azirines 4a-c, obtained by treatment of oximes 2a-c with tosyl chloride and aqueous KOH, were reacted with benzylmagnesium bromide or 4-methylbenzylmagnesium bromide in the presence of zinc chloride to give 2-benzyl-2H-azirines 5a-f. Potassium phthalimide and sodium salt of benzenethiol converted 2-(benzotriazol-1-yl)-2H-azirines 4a-c into novel 2H-azirines 6a-c and 7 in good yields.     

Synthesis of benzotriazolylsuccinimides in melt

N-Phenyl-3-(benzotriazol-1-yl)pyrrolidine-2,5-dione was synthesized by condensation of N-phenylmaleimide with benzotriazole in melt. The adducts of 2 moles of benzotriazole to different bismaleimides, namely, bis[3-(benzotriazol-1-yl)pyrrolidine-2,5-diones] were obtained under analogous conditions. These adducts, according to the data from ¹H and ¹³C NMR spectroscopy, contain also (benzotriazol-2-yl)succinimide and residual maleimide fragments.     

Syntheses and transformations of substituted benzazolyl- and tetrazolyl(benzotriazol-1-yl)methanes

Condensation reactions of o-hydroxy- and o-mercaptoanilines, and o-phenylenediamine with (benzotriazol-1-yl)acetic acid result in (1,3-benzazol-2-yl)(benzotriazol-1-yl)methanes. Cycloaddition of sodium azide to (benzotriazol-1-yl)acetonitrile leads to (1,2,3,4-tetrazol-5-yl)(benzotriazol-1-yl)methane. The diazolo-substituted benzotriazolylmethanes thus obtained were mono- and di-alkylated at the methylene group and the displacement of the benzotriazole group by nucleophiles was investigated.     

Synthesis of 1-(benzotriazol-1-yl)alkyldiphenylphosphine oxides and their transformations to novel benzotriazol-1-yl-substituted cyclopropanes

Diphenylphosphinous anion reacted with chloromethylbenzotriazole to give (benzotriazol-1-yl)methyldiphenylphosphine oxide, which, after lithiation, was alkylated to give 1-(benzotriazol-1-yl)alkyldiphenylphosphine oxides in good yield. Treatment of 1-(benzotriazol-1-yl)alkyldiphenylphosphine oxides with n-butyllithium followed by condensation with epoxides, afforded benzotriazol-1-yl-substituted cyclopropanes, which underwent further lithiation and subsequent reaction with numerous electrophiles to provide a variety of novel benzotriazol-1-yl-substituted cyclopropane derivatives.     

Synthesis and Transformations of 2-Hydroxy-2-(benzotriazol-1-yl)-1,4-naphthoquinone

2-Hydroxy-3-(benzotriazol-1-yl)-1,4-naphthoquinone reacts with o-phenylenediamine and 4-chloro-2-aminophenol to give cyclization products: 5-oxo-6-(benzotriazol-1-yl)-5,6H-benzo[a]phenazine and 5-oxo-6-(benzotriazol-1-yl)-10-chlorobenzo[a]phenoxazine; the reaction with aniline yields the quaternary anilinium salt, and benzoyl chloride and benzenesulfonyl chloride acylate the nitrogen atom of the benzotriazolyl moiety.     

One-pot multistep Bohlmann-Rahtz heteroannulation reactions: synthesis of dimethyl sulfomycinamate

[reaction: see text] The synthesis of dimethyl sulfomycinamate, the acidic methanolysis product of the sulfomycin family of thiopeptide antibiotics, from methyl 2-oxo-4-(trimethylsilyl)but-3-ynoate is achieved in a 2,3,6-trisubstituted pyridine synthesis that proceeds with total regiocontrol in 13 steps by the Bohlmann-Rahtz heteroannulation of a 1-(oxazol-4-yl)enamine or in 12 steps and 9% yield by three-component cyclocondensation with N-[3-oxo-3-(oxazol-4-yl)propanoyl]serine and ammonia in ethanol.     

Preparation of MBHA resin by benzotriazole-mediated amidoalkylation

MBHA (4-methylbenzhydrylamine) resin is widely used as a solid support for the synthesis of carboxamides or peptide C-terminal amides. Herein, we report a new method for synthesizing MBHA resin by benzotriazole-mediated amidoalkylation. MBHA resin was efficiently prepared with N-[(benzotriazol-1-yl)(p-tolyl)methyl]formamide or N-[formamido(p-tolyl)methyl]formamide, and it showed excellent properties as a solid support.     

Asymmetric allylic amination in water catalyzed by an amphiphilic resin-supported chiral palladium complex

[reaction: see text] Catalytic asymmetric allylic amination of cycloalkenyl carbonates (methyl cyclohexen-2-yl carbonate, methyl cyclohepten-2-yl carbonate, methyl 5-methoxycarbonylcyclohexen-2-yl carbonate, methyl cyclohexenyl carbonate, tert-butyl 5-methoxycarbonyloxy-1,2,5,6-tetrahydropyridinedicarboxylate) with dibenzylamines ((C6H5CH2)2NH, (C6H5CH2)(4-CH3OC6H4CH2)NH, (4-CH3OC6H4CH2)2NH) was achieved in water under heterogeneous conditions by use of a palladium complex of (3R,9aS)-3-[2-(diphenylphosphino)phenyl]-2-phenyltetrahydro-1H-imidazo[1,5-a]indole-1-one anchored on polystyrene-poly(ethylene glycol) copolymer resin to give the corresponding cycloalkenylamines with high enantiomeric selectivity (90-98% ee).