Palladium-Catalyzed Coupling of Organo-Stannanes with Hypervalent Iodonium Salts

The palladium-catalyzed cross-coupling of organostannanes with iodonium salts in the presence of PdCl₂(0.5 mol %) or Pd/C(2 mol %) as Pd(O) source was accomplished at room temperature under aqueous conditions.     

Practical and efficient Suzuki-Miyaura cross-coupling of 2-iodocycloenones with arylboronic acids catalyzed by recyclable Pd(0)/C

The first Suzuki-Miyaura cross-coupling of 2-iodocycloenones with arylboronic acids catalyzed by 10% Pd(0)/C is described as an interesting alternative to classical homogeneous conditions. Most of the substrate reacted under mild condition at 25 degrees C under air in aqueous DME. The conditions described tolerate a wide range of iodoenones and boronic acids. Notably, the procedure features inexpensive reagents and solvents with low toxicity rendering the method environmentally benign. Additionally 10% Pd(0)/C could be recovered and efficiently reused at least five times without significant alteration of the yields of the cross-coupled product.     

Polyglycerol as a high-loading support for boronic acids with application in solution-phase Suzuki cross-couplings

In this paper, we describe the usage of a soluble high-loading polyglycerol support for functionalized boronic acids without further linker design. The quantitatively formed polyglycerol boron esters were subsequently employed in homogeneous Suzuki cross-coupling reactions to give high yields (84-91%) of functional biaryls with minimal amounts of the Pd catalyst (0.2 mol %). In situ precipitation and ultrafiltration were used as simple and effective purification protocols. Furthermore, the reaction conditions were optimized by the choice of the solvent and the catalyst.     

Heterogeneous Pd/C-catalyzed ligand-free, room-temperature Suzuki-Miyaura coupling reactions in aqueous media

A mild and efficient ligand-free Suzuki-Miyaura coupling reaction catalyzed by heterogeneous Pd/C was developed. Aryl bromides and triflates undergo the cross-coupling with aryl boronic acids in excellent yields without the presence of any additives in aqueous media at room temperature. Aryl vinyl boronic acids are also applicable to this coupling reaction and provide the trans-stilbene derivatives in high yields. The application of wet-type Pd/C to the coupling reaction was achieved without any loss of activity under aerobic conditions, and the reuse of Pd/C is feasible for a fifth run without significant loss of activity. Inductively coupled plasma (ICP) mass-spectrometric analysis of the filtrate from the reaction mixture of 4-bromonitrobenzene with phenylboronic acid demonstrated that the palladium metal hardly leached into the solution within the limits of the detector (<1 ppm), thus suggesting that the present Suzuki-Miyaura reaction proceeded by heterogeneous catalysis.     

Mizoroki-Heck type reaction of organoboron reagents with alkenes and alkynes. A Pd(II)-catalyzed pathway with Cu(OAc)2 as an oxidant

[reaction: see text]. In contrast to the Pd(0)-catalyzed mechanism by Uemura, Mizoroki-Heck type reaction of boronic acids is found to proceed under a Pd(II)-mediated pathway using a catalytic amount of Pd(OAc)2 in the presence of Cu(OAc)2 as an oxidant. Treatment of a variety of alkenes with boronic acids, boronates, and sodium tetraphenylborate furnishes beta-arylated and alkenylated products in good to excellent yields. The reactions with norbornene, norbornadiene, and diphenylacetylene are also performed to give 1:2 or 2:1 coupling products.     

Tunable carbon-carbon and carbon-sulfur cross-coupling of boronic acids with 3,4-dihydropyrimidine-2-thiones

Direct microwave-assisted Pd(0)-catalyzed/Cu(I)-mediated carbon-carbon cross-coupling of 3,4-dihydropyrimidine-2-thiones and boronic acids under Liebeskind-Srogl conditions leads to 2-aryl-1,4-dihydropyrimidines in moderate to high yield. In contrast, Cu(II)-mediated reaction of the same substrates leads to carbon-sulfur cross-coupling. [reaction: see text]     

Boronic acids: new coupling partners in room-temperature Suzuki reactions of alkyl bromides. Crystallographic characterization of an oxidative-addition adduct generated under remarkably mild conditions

The Suzuki reaction is an exceptionally useful cross-coupling process that has been widely applied in synthetic chemistry, and boronic acids are, by far, the most commonly employed coupling partner. To date, however, no versatile method has been developed for cross-coupling boronic acids with unactivated alkyl (as opposed to aryl or vinyl) electrophiles. This report describes a catalyst system that achieves this objective at room temperature. On the mechanistic side, this study demonstrates that Pd(P(t-Bu)2Me)2 undergoes oxidative addition under surprisingly mild conditions (0 degrees C). The resulting adduct is sufficiently stable toward beta-hydride elimination that it can be structurally characterized, and it is a chemically competent intermediate in the cross-coupling process.     

N-vinylpyridinium and -ammonium tetrafluoroborate salts: new electrophilic coupling partners for Pd(0)-catalyzed Suzuki cross-coupling reactions

N-Vinylpyridinium and -trialkylammonium tetrafluoroborate salts represent a new class of electrophilic coupling partner for Pd(0)-catalyzed Suzuki cross-coupling reactions and give very good to excellent yields of products with a wide range of boronic acids. The salts are easily prepared from activated acetylenes and pyridinium or trialkylammonium tetrafluoroborates to form crystalline, air-stable, and nonhygroscopic crystals. [reaction: see text].     

Suzuki-Miyaura reactions of arenediazonium salts catalyzed by PD(0)/C. One-pot chemoselective double cross-coupling reactions

The Suzuki-Miyaura cross-coupling of arenediazonium tetrafluoroborate salts with boronic acid partners catalyzed by Pd(0)/C is described as a practical and efficient alternative to classical homogeneous conditions. Reactions conducted in alcoholic solvents proved to be extremely fast using mild conditions. Additionally, we developed a chemoselective double Suzuki-Miyaura cross-coupling in a single reaction vessel allowing the synthesis of unsymmetrical terphenyls.     

Palladium-catalyzed, direct boronic acid synthesis from aryl chlorides: a simplified route to diverse boronate ester derivatives

Although much current research focuses on developing new boron reagents and identifying robust catalytic systems for the cross-coupling of these reagents, the fundamental preparations of the nucleophilic partners (i.e., boronic acids and derivatives) has been studied to a lesser extent. Most current methods to access boronic acids are indirect and require harsh conditions or expensive reagents. A simple and efficient palladium-catalyzed, direct synthesis of arylboronic acids from the corresponding aryl chlorides using an underutilized reagent, tetrahydroxydiboron B(2)(OH)(4), is reported. To ensure preservation of the carbon-boron bond, the boronic acids were efficiently converted to the trifluoroborate derivatives in good to excellent yields without the use of a workup or isolation. Further, the intermediate boronic acids can be easily converted to a wide range of useful boronates. Finally, a two-step, one-pot method was developed to couple two aryl chlorides efficiently in a Suzuki-Miyaura-type reaction.     

N-Vinylpyridinium tetrafluoroborate salts as reagents for the stereoselective and regioselective synthesis of symmetrical (2E,4E)-1,6-dioxo-2,4-dienes

We had previously demonstrated the utility of N-vinylpyridinium tetrafluoroborate salts as novel electrophilic coupling partners in Pd(0)-catalyzed Suzuki cross-coupling reactions with aryl and vinyl boronic acids. We now report that these crystalline, air-stable, and non-hygroscopic salts are also useful reagents for the synthesis of symmetrical (2E,4E)-1,6-dioxo-2,4-dienes (diene diones), which in turn are valuable starting materials for the synthesis of various five-membered heterocycles. The optimization of reaction conditions and the scope and limitations of the reductive dimerization are discussed.     

Kaiser oxime resin-derived palladacycle: A recoverable polymeric precatalyst in Suzuki-Miyaura reactions in aqueous media

Representative cross-coupling reactions of aryl bromides with different types of aryl-, alkyl, trivinylboroxine-pyridine complex, and alkenylboronic acids are performed using a polymer-bonded palladacycle derived from Kaiser oxime resin as precatalyst and potassium carbonate as base under water reflux. These processes afford biphenyls, alkylbenzenes, styrenes, and stilbenes, respectively. The same boronic acids can be cross-coupled with representative allyl and benzyl chlorides using KOH as base in aqueous acetone at 50 °C providing allylbenzenes, diarylmethanes, and 1,4-pentadienes. The palladated polymer can be recovered by filtration and reused during 3-9 cycles with up to 5% of Pd leaching in each run. Very low Pd leaching levels in the crude product can be determined by ICP-OES analyses. The reaction does not work when Hg(0) is added. TEM analyses from the solution indicate the formation of Pd nanoparticles.     

Dichloroimidazolidinedione-activated one-pot Suzuki–Miyaura cross-coupling of phenols

The first general method for the Suzuki-type cross-coupling of phenols with aryl boronic acids using dichloroimidazolidinedione (DCID) as a new reagent is presented. In the presence of DCID and Pd/metal–organic framework (MOF), coupling of aryl boronic acids with a wide range of phenols, was carried out smoothly in tetrahydrofuran (THF) at reflux conditions to afford the cross-coupling products in good to excellent yields. The structures of all compounds were corroborated by ¹H- and ¹³C-NMR. A plausible mechanism for this type of reaction is proposed.     

Combining enabling techniques in organic synthesis: solid-phase-assisted catalysis under microwave conditions using a stable Pd(II)-precatalyst

The catalytic activity of a 2-pyridinealdoxime-based Pd(II)-complex covalently anchored via the oxime moiety to a glass/polymer composite material was evaluated in Suzuki-Miyaura cross-coupling reactions of aryl and heteroaryl halides, including arylchlorides, with aryl and heteroaryl boronic acids both under thermal as well as microwave irradiating conditions in water. The stability and reusability of this Pd-precatalyst is part of the present study.     

Efforts directed toward the synthesis of colchicine: application of palladium-catalyzed siloxane cross-coupling methodology

[reaction: see text] Colchicine is an important and synthetically challenging natural product. The key synthetic step in this approach to the synthesis of colchicine involved a palladium-catalyzed cross-coupling reaction between 5-bromotropolone (4) and an aryl siloxane to form the aryl-tropolone bond. The coupling of a variety of highly functionalized aryl siloxane derivatives was investigated and optimized coupling conditions were developed. It was discovered that a palladium catalyst with a high degree of phosphine ligand coordination (5 equiv of phosphine/mol Pd) was necessary to efficiently couple aryl siloxanes with 5-bromotropolone (4). In addition, the coupling approach has provided a direct comparison between siloxane and boronic acid coupling technologies that demonstrated that aryl siloxanes and boronic acids produce similar yields of highly functionalized biaryl products.     

Pd-catalyzed direct arylation of tautomerizable heterocycles with aryl boronic acids via C-OH bond activation using phosphonium salts

The first direct arylation via C-OH bond activation of tautomerizable heterocycles has been achieved using phosphonium salts, on the basis of a combination of the phosphonium coupling and Suzuki-Miyaura cross-coupling conditions. Optimal reaction condition is obtained through screening of phosphonium salts, Pd catalysts, and bases. The direct arylation via C-OH bond activation tolerates a variety of tautomerizable heterocycles and aryl boronic acids. The mechanism of the Pd-catalyzed phosphonium coupling is proposed to proceed via a domino seven-step process including the unprecedented heterocycle-Pd(II)-phosphonium species. Application of the Pd-catalyzed direct arylation via C-OH bond activation using PyBroP leads to the most efficient synthesis of the biologically important 6-arylpurine ribonucleoside in a single step from unactivated and unprotected inosine.     

First synthesis of beta-keto sulfoxides by a palladium-catalyzed carbonylative Suzuki reaction

[reaction: see text] An unprecedented palladium-catalyzed three-component cross-coupling reaction between alpha-bromo sulfoxide, carbon monoxide, and aromatic boronic acids provides a new and efficient approach to the synthesis of beta-ketosulfoxides. The reaction takes place under mild conditions with a wide range of variously substituted aryl and heteroaryl boronic acids. The carbonylative cross-coupling reaction is strongly favored over competing direct cross-coupling and homocoupling processes, except with boronic acids carrying strong electron-withdrawing substituents.     

Cross-Coupling of Diarylborinic Acids and Anhydrides with Arylhalides Catalyzed by a Phosphite/N-Heterocyclic Carbene Co-supported Palladium Catalyst System

A highly efficient cross-coupling of diarylborinic acids and anhydrides with aryl chlorides and bromides has been effected by using a palladium catalyst system co-supported by a strong σ-donor N-heterocyclic carbene (NHC), N,N'-bis(2,6-diisopropylphenyl) imidazol-2-ylidene, and a strong π-acceptor phosphite, triphenylphosphite, in tert-BuOH in the present of K(3)PO(4)·3H(2)O. Unsymmetrical biaryls with a variety of functional groups could be obtained in good to excellent yields using as low as 0.01, 0.2-0.5, and 1 mol % palladium loadings for aryl bromides and activated and deactivated aryl chlorides, respectively, under mild conditions. A ligand synergy between the σ-donor NHC and the π-acceptor phosphite in the Pd/NHC/P(OPh)(3) catalytic system has been proposed to be responsible for the high efficacy to arylchlorides in the cross-coupling. A scalable and economical process has therefore been developed for synthesis of Sartan biphenyl from the Pd/NHC/P(OPh)(3) catalyzed cross-coupling of di(4-methylphenyl)borinic acid with 2-chlorobenzonitrile.     

Microwave-assisted Suzuki cross-coupling reaction, a key step in the synthesis of polycyclic aromatic hydrocarbons and their metabolites

A highly efficient and general method for Suzuki cross-coupling reaction en route to the synthesis of polycyclic aromatic hydrocarbons (PAHs) and their metabolites has been developed. Microwave irradiation of aryl bromides 1 and boronic acids (2 and 3) using polyurea microencapsulated palladium catalyst (Pd EnCat 30) gave the coupling adducts 4 and 5 in excellent yields in just 20 min compared to approximately 24 h under thermal conditions, corresponding to a approximately 72-fold increase in reaction rate.     

Decarboxylative Conjunctive Cross-coupling of Vinyl Boronic Esters using Metallaphotoredox Catalysis

The synthesis of complex alkyl boronic esters through conjunctive cross-coupling of vinyl boronic esters with carboxylic acids and aryl iodides is described. The reaction proceeds under mild metallaphotoredox conditions and involves an unprecedented decarboxylative radical addition/cross-coupling cascade of vinyl boronic esters. Excellent functional-group tolerance is displayed, and application of a range of carboxylic acids, including secondary α-amino acids, and aryl iodides provides efficient access to highly functionalized alkyl boronic esters. The decarboxylative conjunctive cross-coupling was also applied to the synthesis of sedum alkaloids.