Bicyclo[3.1.0]hex-(1,5)-ene and bicyclo[4.1.0]hept-(1,6)-ene

The formation and trapping of bicyclo[3.1.0]hex-(1,5)-ene and bicyclo[4.1.0]hept-(1,6)-ene from the corresponding vicinal dibromides is described.     

13C-NMR-spektren von bicyclo[n.1.0]alkenen

The ¹³C-NMR spectra of some bicyclo[3.1.0]hex-3-en-2-ols and of some bicyclo[3.1.0]hex-3-en-2-ones are described. The bond parameters of bicyclo[3.1.0]hex-3-en-2-one are derived from a structure determination of endo-6-methoxy-1,3,6-triphenylbicyclo[3.1.0]hex-3-en-2-one. The electron density is calculated by the EHT method, and correlated with the ¹³C NMR shifts. For comparison the ¹³C NMR spectrum of a bicyclo[4.1.0]hepta-1,5-dione derivative is analysed. The influence of a cyclopropane system attached to a five-membered and to a six-membered ring is elucidated. Whereas the five-membered ring shows conjugation between the carbonyl group and the cyclopropane system, the same effect is not observed in the six-membered ring analogue. This is explained by the highly rigid structure of the five-membered ring.     

Electronic and Steric Structure of Thermal Isomerization Products of 1-Methyltricyclo[4.1.0.02,7]heptane Radical Cation

Distributions of the positive charge and unpaired electron in stable conformers of the thermal isomerization products of 1-methyltricyclo[4.1.0.02,7]heptane radical cation, having bicyclo[3.1.1]heptane, bicyclo[4.1.0]heptane, bicyclo[3.2.0]hept-6-ene, and 1,3-cycloheptadiene skeletons, were estimated by the PM3 semiempirical method.     

Preparation and aluminum trichloride-induced cationic rearrangements of bicyclo[2.2.0]hexene carboxylic esters

Reaction between the tetramethyl[4]annulene aluminum trichloride σ-complex and α, β-alkenic esters gave the corresponding 1,4,5,6-tetramethylbicyclo[2.2.0]hex-5-one-2-endo-carboxylic esters. AlCl₃-induced cationic rearrangements of these bicyclic esters yielded a number of bicyclo[3.1.0]hexene carboxylic esters and related lactones which were isolated and identified. The isomerization seems to proceed via stereospecific endo protonation and subsequent rearrangement to 2-methoxycarbonyl-1,4,5,6-exo-tetramethylbicyclo(3.1.0]hex-4-yl carbocations.     

Preparation of bicyclo[3.2.0]heptane-2-endo,7-endo-diols: 1,3-diols with a chiral rigid backbone

The easily available bicyclo[3.2.0]hept-3-en-6-ones (1a-f) have been converted into the corresponding bicyclo[3.2.0]heptane-2-endo,7-endo-diols (4a-f) in an efficient and stereoselective fashion. This preparation opens a route to a family of 1,3-diols with a chiral rigid backbone, potentially suitable as nonracemic precursors for bidentate ligands in asymmetric synthesis.     

Unusual carbon shielding effects of cyclopropanes and double bonds in strained bicyclo[3.1.0]hexanes and cyclopentenes

Carbon-13 shieldings and one-bond ¹³C? H coupling constants of bicyclo[2.1.1]hexane, bicyclo[2.1.1]hex-2-ene, tricyclo[3.1.1.0^2,4]heptane and benzvalene are presented and compared to the data of related compounds. If a bicyclo[3.1.0]hexane system is part of a rigid skeleton, the cyclopropane ring exerts specific γ substituent effects of two kinds. In the case of the bicyclohexane boat form an upfield shift of the C-3 signal is observed and in the case of the chair form a downfield shift of 15–20 ppm. Compared to the corresponding cyclopentanes the double bond in strained cyclopentenes causes downfield shifts of the C-4 absorption. This effect increases with increasing strain, reaching a 45.9 ppm maximum in benzvalene. Hence it is the only known bicyclo[1.1.0]butane having a reversed order of carbon shieldings. The downfield shifts are explained by means of simple orbital interaction schemes.     

Ruthenium carbene initiated ring-open metathesis polymerization of endo-bicyclo[3.2.0]hept-6-en-3-yl benzoates with tacticity studies

<正>After tentative ring-opening cross metathesis(ROCM) of endo-bicyclo[3.2.0]hept-6-en-3-yl 4-bromobenzoate with PhCH=CH_2 initiated by(Cy_3P)_2Cl_2Ru=CHPh in CH_2Cl_2,ring-opening metathesis polymerization(ROMP) of a series of endo-bicyclo[3.2.0]hept-6-en-3-yl benzoates was achieved under the same conditions,furnishing a variety of the corresponding polymers.Then some of them were selected to hydrogenate the C=C double bonds in their backbone with p-tosylhydrazide,affording saturated and thus more flexible polymers.All of these polymers were well characterized by spectroscopic means including GPC,UV-Vis,NMR and IR,based on which the tacticity of these polymers was investigated together with nonlinear optical(electric-field-induced second-harmonic generation,EFISH)) analysis.     

Thermal isomerization of tricyclo[4.1.0.0(2,7)]heptane and bicyclo[3.2.0]hept-6-ene through the (E,Z)-1,3-cycloheptadiene intermediate

The thermal isomerization of tricyclo[4.1.0.0(2,7)]heptane and bicyclo[3.2.0]hept-6-ene was studied using ab initio methods at the multiconfiguration self-consistent field level. The lowest-energy pathway for thermolysis of both structures proceeds through the (E,Z)-1,3-cycloheptadiene intermediate. Ten transition states were located, which connect these three structures to the final product, (Z,Z)-1,3-cycloheptadiene. Three reaction channels were investigated, which included the conrotatory and disrotatory ring opening of tricyclo[4.1.0.0(2,7)]heptane and bicyclo[3.2.0]hept-6-ene and trans double bond rotation of (E,Z)-1,3-cycloheptadiene. The activation barrier for the conrotatory ring opening of tricyclo[4.1.0.0(2,7)]heptane to (E,Z)-1,3-cycloheptadiene was found to be 40 kcal mol(-1), while the disrotatory pathway to (Z,Z)-1,3-cyclohetpadiene was calculated to be 55 kcal mol(-1). The thermolysis of bicyclo[3.2.0]hept-6-ene via a conrotatory pathway to (E,Z)-1,3-cycloheptadiene had a 35 kcal mol(-1) barrier, while the disrotatory pathway to (Z,Z)-1,3-cyclohetpadiene had a barrier of 48 kcal mol(-1). The barrier for the isomerization of (E,Z)-1,3-cycloheptadiene to bicyclo[3.2.0]hept-6-ene was found to be 12 kcal mol(-1), while that directly to (Z,Z)-1,3-cycloheptadiene was 20 kcal mol(-1).     

Thermal reactions of 7-d- and 8-d-bicyclo[4.2.0]oct-2-enes

The gas phase thermal reactions exhibited by bicyclo[4.2.0]oct-2-ene and 7-d and 8-d analogues at 300 degrees C have been followed kinetically through GC and 2H NMR spectroscopic analyses. In contrast to the pattern of transformations exhibited by bicyclo[3.2.0]hept-2-ene and deuterium-labeled analogues, no reactions initiated by C1-C6 bond cleavage are seen, epimerization at C8 is much faster than [1,3] shifts leading to bicyclo[2.2.2]oct-2-ene, and the ratio of rate constants for [1,3] carbon migration with inversion versus migration with retention is approximately 1.4. Homolysis of C1-C8 to give a conformationally flexible diradical intermediate having a relatively long lifetime and multiple options for further reaction (re-formation of C1-C8 with or without net epimerization, fragmentation to 1,3-cyclohexadiene and ethylene, migration to the original C3 with inversion or retention) accords well with the observations. Clearly, orbital symmetry control does not govern stereochemistry for the [1,3] sigmatropic carbon shifts.     

Reactions of [2+2+1]-cycloaddition with the participation of cyclopropenes and dicobalt hexacarbonyl complexes of acetylenes

The reaction of dicobalt hexacarbonyl complexes of acetylene and its phenyl and dimethyl derivatives with the methyl ester of 1-methyl-2-(trimethylsilyl)-1-cyclopropene-3-carboxylic acid with adsorption on a silica gel or NaX zeolite surface leads to the formation of a mixture of bicyclo[3.1.0]hex-2-en-4-one and tricyclo[4.1.0.0^2,4]heptan-5-one derivatives, whereby the yields and the composition of products are dependent on the type of the adsorbent. It has been found that under the reaction conditions partial isomerization of the bicyclo-[3.1.0]hex-2-en-4-one derivatives into substituted phenols occurs. Action of anhydrous KF and crown-ether in acetonitrile on the bicyclo[3.1.0]hex-2-en-4-one derivatives in acetonitrile leads to protodesilylation.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 11, pp. 2565–2571, November, 1991.     

A Diastereoselective Preparation of 7-Ethyl-7-methylbicyclo[3.2.0]HEPT-2-en-6-one(1)

Alkylation of 7-endo-ethylbicyclo[3.2.0]hept-2-en-6-one (2a) and 7-endo-methylbicyclo[3.2.0]hept-2-en-6-one (2b) with lithium diisopropylamide (LDA) and the appropriate alkyl iodide (methyl and ethyl iodide, respectively) afforded the title compound such that alkylation had occurred exclusively on the exo face of the bicyclo[3.2.0] system.     

Comprehensive study of the methyl effect on the solvolysis rates of bridgehead derivatives

The effect of a bridgehead methyl group on the hydride ion affinity in the gas phase of bicyclo[1.1.1]pent-1-yl (1+), 1-norbornyl (3+), cubyl (5+), 1-adamantyl (7+), bicyclo[2.2.2]oct-1-yl (9+),and bicyclo[3.1.1]hept-1-yl (11+) cations has been studied using density functional theory and ab initio methods. It is concluded that the methyl group always increases the stability of the substituted cations. The effect of the solvent on the stability of methyl-substituted cations in relation to the unsubstituted cations has been studied using the polarizable continuum model of the self-consistent reaction field theory. In the case of rearranging cations, the nucleophilic assistance of the solvent is determined by means of the interaction energy of the corresponding water complexes. It is concluded that the solvent causes the relative stabilization of the parent cations. As a consequence, most of the methyl-substituted bridgehead derivatives show a lower solvolysis rate than the corresponding unsubstituted compounds. A nonqualitative explanation of the methyl effect on the relative stability of bridgehead cations in both gas phase and solution is given for the first time. The ratios of solvolysis products in the case of rearranging bridgehead cations have also been computed from the relative stability of the intermediate water complexes.     

Non‐empirical calculations of NMR indirect carbon‐carbon coupling constants. Part 5: Bridged bicycloalkanes

All possible J(C,C) of the bicarbocyclic frameworks together with J(C,H) and J(H,H) at bridgeheads in the series of six bridged bicycloalkanes, bicyclo[1.1.0]butane, bicyclo[2.1.0]pentane, bicyclo[3.1.0]hexane, bicyclo[2.2.0]hexane, bicyclo[3.2.0]heptane and bicyclo[3.3.0]octane, were calculated at the SOPPA level with correlation consistent Dunning sets cc‐pVTZ‐Cs augmented with inner core s‐functions and locally dense Sauer sets aug‐cc‐pVTZ‐J augmented with tight s‐functions and rationalized in terms of the multipath coupling mechanism and hybridization effects explaining many interesting structural trends. Copyright © 2003 John Wiley & Sons, Ltd.     

[2+2]-cycloadditions of cyclopentyne

Cyclopentyne, as generated from dibromomethylenecyclobutane, a formerly unknown cyclopentyne source, undergoes [2+2]-cycloadditions with various substituted olefins yielding bicyclo[3.2.0]hept-1(5)-ene derivatives.     

Thermal rearrangement of 7-methylbicyclo

The gas-phase thermal rearrangement of exo-7-methylbicyclo[3.2.0]hept-2-ene yields almost exclusively 5-methylnorbornene products. Inversion (i) of configuration dominates this [1,3] sigmatropic shift although some retention (r) is also observed. Because the [1,3] migration can only occur suprafacially (s) in this geometrically constrained system, the si/sr ratio of 7 observed for the migration of C7 in exo-7-methylbicyclo[3.2.0]hept-2-ene indicates that the orbital symmetry rules are somewhat permissive for the [1,3] sigmatropic migration of carbon.     

Synthesis of Bicyclo[n.1.0]alkanes by a Cobalt‐Catalyzed Multiple C(sp3)−H Activation Strategy

A cobalt‐catalyzed dual C(sp³)−H activation strategy has been developed and it provides a novel strategy for the synthesis of bicyclo[4.1.0]heptanes and bicyclo[3.1.0]hexanes. A key to the success of this reaction is the conformation‐induced methylene C(sp³)−H activation of the resulting cobaltabicyclo[4.n.1] intermediate. In addition, the synthesis of bicyclo[3.1.0]hexane from pivalamide, by a triple C(sp³)−H activation, has also been demonstrated.     

Photoisomerization of quinolin-2-yl derivatives of β-tropolone

Photolysis of hexane solutions of quinolin-2-yl-β-tropolones is accompanied by the photo-induced proton transfer O-H...N → O...H-N followed by the disrotatory electrocyclic rearrangement giving rise to 3-(1H-quinolin-2-ylidene)bicyclo[3.2.0]hept-6-ene-2,4-dione derivatives. The molecular and crystal structure of one of the compounds isolated preparatively, viz., 1,6-di(tert-butyl)-3-(4-chloro-8-methyl-1H-quinolin-2-ylidene)bicyclo[3.2.0]hept-6-ene-2,4-dione, was established by X-ray diffraction. The structures, tautomeric transformations, and the structural dynamics of the resulting compounds were studied by ab initio quantum chemical methods, absorption and fluorescence spectroscopy, and dynamic NMR spectroscopy. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 467–474, March, 2006.     

Remarkably facile solvolyses of triflates via carbocationic processes in dimethyl sulfoxide

A number of triflates have been shown to undergo clean pseudo-first-order solvolysis reactions in DMSO-d(6) to give products derived from carbocationic intermediates. Thus, t-BuCH(OTf)CO-t-Bu (5) and t-BuCH(2)OTf (9) react readily in DMSO-d(6) at 25 degrees C to give a rearranged oxosulfonium salts, and subsequent alkene products where methyl migration to the incipient cationic center occurs. t-BuCH(OTf)CO(2)CH(3) (14) gives analogous rearranged products, and 1-methylcyclopropyl triflate (21) gives a ring-opened allylic oxosulfonium salt. These triflates react primarily via k(Delta) pathways. 6-Methylbicyclo[3.1.0]hex-6-yl triflate (23), bicyclo[2.2.1hept-1-yl triflate (24), 1,6-methano[10]annulen-11-yl triflate (25), (CH(3))(2)C(OTf)CO(2)CH(3) (26), and (CH(3))(2)CCN(OTf) (29) all react in DMSO-d(6) to give carbocation-derived products. PhCH(OTf)CF(3) (33) and substituted analogues also react readily in DMSO-d(6), and the Hammett rho(+) value is -3.7. This suggests a "borderline" mechanism where the transition state has substantial charge development. The primary feature of these solvolyses is the high reactivity of all of these triflates in DMSO-d(6). Thus, these triflates are all more reactive in DMSO-d(6) than in HOAc, and for most, rates are faster than in CF(3)CH(2)OH. Triflates 5, 21, 29, and 33 are 10(8)-10(9) times more reactive in DMSO-d(6) than the corresponding mesylates. It is suggested that the decreased need for electrophilic solvation of triflate anion, and the high cation solvating ability of DMSO, are the reasons for the high triflate reactivity in DMSO-d(6).     

Photoreaction of 5-dicyanomethylenebicyclo[2.2.1]hept-2-ene

Irradiation of 5-dicyanomethylenebicyclo[2.2.1lhept-2-ene induces new types of photoreactions, i.e., unprecedented skeletal rearrangement leading to 7,7-dicyano-6-methylenebicyclo[3.1.1]hept-2-ene, and novel 1,3-carbon shifts to bicyclo[3.2.0]- and bicyclo[4.1.0]heptene.     

The photosensitized rearrangement of aryl-substituted tricyclo[2.2.0.02,6]hexanes to bicyclo[3.1.0]hex-2-enes

The triplet sensitized irradiation of 3-allyl-diaryl-substituted cyclopropenes to bicyclo[3.1.0]hex-2-enes proceeds via an intramolecular [2+2]-cycloaddition followed by a subsequent rearrangement of the initially formed tricyclo[2.2.0.0^2,6]hexane skeleton.