CIDNP of 13C and 1H nuclei in the reactions of cyclohexadienone carbenes

Thermal decomposition of 4-diazo-2,6-di-tert-butyl-2, 5-cyclohexadien-1-one in perhalogenated solvents has been investigated. The decomposition reaction proceeds via a carbene intermediate first to a singlet and then to an effectively triplet free encounter radical pair formed in a halogen abstraction reaction. The polarisation of the stable reaction product is determined by competing processes in the primary cage, intersystem crossing and escape from the cage.     

ELECTROCHEMICAL SUPEROXIDATION OF FLAVINS: GENERATION OF ACTIVE PRECURSORS IN LUMINESCENT MODEL SYSTEMS

Using 3-methyllumiflavin and tetraacetyliriboflavin as examples, we have shown that the socalled "fully oxidized" flavins can be "superoxidized" at an anodic potential of 1.8 to 1.9 V giving flavin radical cation transients which are rapidly transformed in subsequent chemical reactions. An attack by H2O subsequent to the superoxidation of 3-methyllumiflavin provides a route for the formation of 4a-hydroxy-3-methyllumiflavin radical cation, as evident from the subsequent decomposition to the protonated form of the starting flavin. When 3-methyllumiflavin is superoxidized in the presence of a base, a recycling process occurs, allowing superoxidized flavin to be trapped in a slower, competitive conversion. The relatively more stable trapped product is active in reacting with H2O2 to emit chemiluminescence. Electrochemical oxidation of H2O2 in acetonitrile at 1.30 V in the presence of an oxidized flavin results in a direct protonation of the flavin by H+ generated from the electrolysis of H2O2. Minor reactions presumably provide alternative formations of the 4a-hydroperoxy- and 4a-hydroxy-flavin radical cation transients by the direct addition of HOO. and HO. radicals, which also arise in the oxidation of H2O2, to protonated flavin. Under such conditions the superoxidized flavin radical cation is apparently also formed, either directly or by process(es) such as decomposition of the flavin 4a-adduct radical cations. Subsequent reductions of either the superoxidized flavin or the flavin 4a-adduct radical cations lead to an almost steady level of luminescence.(ABSTRACT TRUNCATED AT 250 WORDS)     

4-溴苯酚的酶催化聚合及其抗自由基性能

在有机溶剂和缓冲溶液的混合体系中对4-溴苯酚的酶催化聚合反应进行了研究;利用红外光谱分析了产物的分子结构.结果表明,有机溶剂与缓冲溶液配比对反应产率和产物分子量影响较大.以乙醇为有机溶剂,当其与磷酸盐缓冲溶液(pH=7)体积比为1∶3时,反应产率较高,而聚合产物的分子量随反应体系中乙醇含量的增加呈上升趋势.与此同时,4-溴苯酚聚合物分子链含有苯-苯连接和苯-氧连接两种结构;4-溴苯酚聚合物的热分解温度在250℃左右,具有较好的热稳定性;且其对1,1-二苯基-2-三硝基苯肼(DPPH)自由基和2,2′-联氮双(3-乙基苯并噻唑啉-6-磺酸)二铵盐(ABTS)阳离子自由基均表现出明显的抑制作用.     

Mechanism of decomposition of cyclic peroxides, 4-alkoxy-1,4-dihydro-2,3-benzodioxin-1-ols, to afford hydroxyl radical.

The decomposition of 4-alkoxy-1,4-dihydro-2,3-benzodioxin-1-ols (1, Bd) in aqueous media was examined. Increasing the water content of the medium accelerated the decomposition of 1 and increased the formation of the corresponding 2-formyl benzoic acid ester (2) as the decomposition product. Electron spin resonance (ESR) studies using dimethylpyrroline N-oxide (DMPO) as a spin trapping reagent had revealed that hydroxyl radicals are formed during the decomposition of 1 (Matsugo et al., FEBS Lett., 184, 25 (1985)). Thus, water-mediated decomposition of 1 was suggested to occur, affording the ester 2 and hydroxyl radical. Direct involvement of water was confirmed by an 18O isotopic tracer experiment which revealed that 18O was incorporated exclusively into the formyl position of the ester 2. It is plausible that a hydrated hydroperoxide (5) is formed by the addition of water at the formyl position of the ring-opened structure of 1 at the initial stage of the decomposition of 1. Preliminary studies on the antibacterial activities of 1 showed moderate cell-killing activity, especially to Pseudomonas strains, and the activity was found to be related to the decomposition of 1.     

Isomerization and decomposition reactions in the pyrolysis of branched hydrocarbons: 4-methyl-1-pentyl radical

The kinetics of the decomposition of 4-methyl-1-pentyl radicals have been studied from 927-1068 K at pressures of 1.78-2.44 bar using a single pulse shock tube with product analysis. The reactant radicals were formed from the thermal C-I bond fission of 1-iodo-4-methylpentane, and a radical inhibitor was used to prevent interference from bimolecular reactions. 4-Methyl-1-pentyl radicals undergo competing decomposition and isomerization reactions via beta-bond scission and 1, x-hydrogen migrations (x = 4, 5), respectively, to form short-chain radicals and alkenes. Major alkene products, in decreasing order of concentration, were propene, ethene, isobutene, and 1-pentene. The observed products are used to validate a RRKM/master equation (ME) chemical kinetics model of the pyrolysis. The presence of the branched methyl moiety has a significant impact on the observed reaction rates relative to analogous reaction rates in straight-chain radical systems. Systems that result in the formation of substituted radical or alkene products are found to be faster than reactions that form primary radical and alkene species. Pressure-dependent reaction rate constants from the RRKM/ME analysis are provided for all four H-transfer isomers at 500-1900 K and 0.1-1000 bar pressure for all of the decomposition and isomerization reactions in this system.     

CIO自由基与CN自由基反应的密度泛函理论研究

应用量子化学从头算和密度泛函理论（DFT）对CIO与CN的双自由基反应进行了研究．结果表明,CIO自由基的O原子进攻CN自由基的C原子是主要的进攻方式,并形成了中间体1 CIOCN．随后,中间体1发生异构化和分解反应得到热力学上可行的3种产物P4（CINCO）,P1（CO＋CIN）和P3（NO＋CCl）．其中P4是主要产物,P1和P3是次要产物．与单态势能面上相比,三态势能面对整个反应的贡献可以忽略．     

Radical production in the radiolysis of liquid pyridine

A combined experimental and theoretical approach has been used to probe the radiolytic decomposition of liquid pyridine. The major single condensed phase product in the gamma-radiolysis of pyridine is dipyridyl with a yield of 1.25 molecules/100 eV total energy absorbed. Scavenging studies suggest that most, if not all, dipyridyl has a radical precursor, but only about 10% of that is due to the pyridyl radical. The remainder of the dipyridyl may be due to reaction of the parent radical cation with pyridine. Iodine scavenging and quantum chemical calculations both show that the ortho-pyridyl radical (2-pyridyl) is far more stable than the other two isomers.     

The reaction of phenyl radical with molecular oxygen: a G2M study of the potential energy surface

Ab initio G2M calculations have been performed to investigate the potential energy surface for the reaction of C6H5 with O2. The reaction is shown to start with an exothermic barrierless addition of O2 to the radical site of C6H5 to produce phenylperoxy (1) and, possibly, 1,2-dioxaspiro[2.5]octadienyl (dioxiranyl, 8) radicals. Next, 1 loses the terminal oxygen atom to yield the phenoxy + O products (3) or rearranges to 8. The dioxiranyl can further isomerize to a seven-member ring 2-oxepinyloxy radical (10), which can give rise to various products including C5H5 + CO2, pyranyl + CO, o-benzoquinone + H, and 2-oxo-2,3-dihydrofuran-4-yl + C2H2. Once 10 is produced, it is unlikely to go back to 8 and 1, because the barriers separating 10 from the products are much lower than the reverse barrier from 10 to 8. Thus, the branching ratio of C6H5O + O against the other products is mostly controlled by the critical transition states between 1 and 3, 1 and 8, and 8 and 10. According to the calculated barriers, the most favorable product channel for the decomposition of 10 is C5H5 + CO2, followed by pyranyl + CO and o-benzoquinone + H. Since C6H5O + O and C5H5 + CO2 are expected to be the major primary products of the C6H5 + O2 reaction and thermal decomposition of C6H5O leads to C5H5 + CO, cyclopentadienyl radicals are likely to be the major product of phenyl radical oxidation, and so it results in degradation of the six-member aromatic ring to the five-member cyclopentadienyl ring. Future multichannel RRKM calculations of reaction rate constants are required to support these conclusions and to quantify the product branching ratios at various combustion conditions.     

On the reported emission from the T2 state during ECL of 9,10-diphenylanthracene

The long wavelength component of the emission occurring during the electron transfer reaction of the electrogenerated radical ions of 9,10-diphenylanthracene (DPA) in acetonitrile and 1,2-dimethoxyethane solutions, previously attributed to T₂ → T₁ emission, was investigated. Several sources contributing to detection of emission at wavelengths beyond 620 nm are discussed and the major source is attributed to a stable product formed by a small amount of decomposition of DPA radical cation.     

Decomposition of diacyl peroxide—VII : Oxygen scrambling in 1-apocamphoryl peroxide and related diacyl peroxides-general remarks on the relationship between the stability of acyloxy radical and amounts of cage recombinations and ester formation in the decomposition of diacyl peroxide

Thermal decomposition of 1-apocamphoryl peroxide has been investigated in CCl₄ using the ¹⁸O-labelled peroxide. 1-Apocamphoryl peroxide is the first example which undergoes radical decomposition, carboxy-inversion and oxygen scrambling reaction between carbonyl and peroxidic O atoms in the peroxide in comparable rates. The major product of the decomposition was the inversion product, 1-apocamphoryl 1-apocamphyl carbonate (52·5%), and only a minute amount of 1-apocamphyl 1-apocamphorate (2·2%) was formed. The rates of oxygen scrambling were found to be 2·70±0·21 × 10^?6 (55°), 1·85±0·12 × 10^?1 sec^?1 (70°) and 9·33±0·18 × 10^?5 sec^?1 (84·3°) (E_a, 27·5 Kcal/mol, ΔS3, ?2·3 e.u.). The cage recombination mechanism was suggested for the oxygen scrambling and the amounts of cage recombination of 1-apocamphoryloxy radical pair were calculated as 65% (55°), 60% (70°) and 52% (84·3°). The yield of the ester and the amount of cage recombination of geminate acyloxy radical pair were rationalized in terms of the stability of acyloxy radicals formed in the cage.     

Ultraviolet photodissociation dynamics of the benzyl radical

Ultraviolet (UV) photodissociation dynamics of jet-cooled benzyl radical via the 4(2)B(2) electronically excited state is studied in the photolysis wavelength region of 228 to 270 nm using high-n Rydberg atom time-of-flight (HRTOF) and resonance enhanced multiphoton ionization (REMPI) techniques. In this wavelength region, H-atom photofragment yield (PFY) spectra are obtained using ethylbenzene and benzyl chloride as the precursors of benzyl radical, and they have a broad peak centered around 254 nm and are in a good agreement with the previous UV absorption spectra of benzyl. The H + C(7)H(6) product translational energy distributions, P(E(T))s, are derived from the H-atom TOF spectra. The P(E(T)) distributions peak near 5.5 kcal mol(-1), and the fraction of average translational energy in the total excess energy, , is ～0.3. The P(E(T))s indicate the production of fulvenallene + H, which was suggested by recent theoretical studies. The H-atom product angular distribution is isotropic, with the anisotropy parameter β ≈ 0. The H/D product ratios from isotope labeling studies using C(6)H(5)CD(2) and C(6)D(5)CH(2) are reasonably close to the statistical H/D ratios, suggesting that the H/D atoms are scrambled in the photodissociation of benzyl. The dissociation mechanism is consistent with internal conversion of the electronically excited benzyl followed by unimolecular decomposition of the hot benzyl radical on the ground state.     

Direct detection of products from the pyrolysis of 2-phenethyl phenyl ether

The pyrolysis of 2-phenethyl phenyl ether (PPE, C(6)H(5)C(2)H(4)OC(6)H(5)) in a hyperthermal nozzle (300-1350 °C) was studied to determine the importance of concerted and homolytic unimolecular decomposition pathways. Short residence times (<100 μs) and low concentrations in this reactor allowed the direct detection of the initial reaction products from thermolysis. Reactants, radicals, and most products were detected with photoionization (10.5 eV) time-of-flight mass spectrometry (PIMS). Detection of phenoxy radical, cyclopentadienyl radical, benzyl radical, and benzene suggest the formation of product by the homolytic scission of the C(6)H(5)C(2)H(4)-OC(6)H(5) and C(6)H(5)CH(2)-CH(2)OC(6)H(5) bonds. The detection of phenol and styrene suggests decomposition by a concerted reaction mechanism. Phenyl ethyl ether (PEE, C(6)H(5)OC(2)H(5)) pyrolysis was also studied using PIMS and using cryogenic matrix-isolated infrared spectroscopy (matrix-IR). The results for PEE also indicate the presence of both homolytic bond breaking and concerted decomposition reactions. Quantum mechanical calculations using CBS-QB3 were conducted, and the results were used with transition state theory (TST) to estimate the rate constants for the different reaction pathways. The results are consistent with the experimental measurements and suggest that the concerted retro-ene and Maccoll reactions are dominant at low temperatures (below 1000 °C), whereas the contribution of the C(6)H(5)C(2)H(4)-OC(6)H(5) homolytic bond scission reaction increases at higher temperatures (above 1000 °C).     

High temperature kinetics of the thermal decomposition of the lower alkanoic acids

The thermal decomposition of propanoic acid dilute in argon has beenstudied in a single-pulse shock tube over the temperature range of 1100-1500 K and over the pressure range of 14-18 atm. The decomposition kinetics have been satisfactorily computer modelled by means of afree radical mechanism involving H and OH chains. Recent single-pulse shock tube product analyses of acetic acid decomposition have been computer modelled using a free radical mechanism for decarboxylation coupled to a unimolecular dehydration reaction. A comparison between the thermal decomposition kinetics of the C₁? C₃ alkanoic acids is made. The present studies do notprovide evidence for the participation of transition states involving a pentavalent carbon atom in the pyrolyses of the lower alkanoic acids.     

The possibility of the decomposition of 2'-deoxyribose moiety of thymidine induced by the low energy electron attachment

To evaluate the possibility of the decomposition of 2-deoxyribose moiety of thymidine induced by low energy electrons (LEE) attachment, the transition states and the energy barriers of the bond breaking processes of the ribose of the nucleoside have been studied theoretically by applying the density functional theory with the double zeta basis sets (DZP++). The energy barriers for the breakage of the C-C bonds (C(1')-C(2'), C(2')-C(3'), C(3')-C(4'), and C(4')-C(5')) of the ribose group of the radical anion of thymidine are found to be high (ca. 42-57 kcal/mol). The total energies of the C-C bond-broken products are significantly higher than that of the radical anion dT(*-). The decomposition of dT(*-) through the C-C bond rupture is unlikely to take place. The rupture of the C(1')-O(4') bond of dT(*-) needs an activation energy as low as 10.4 kcal/mol. However, the reversed reaction (C(1')-O(4') bond formation) needs the activation energy low as 0.3 kcal/mol. Therefore, the intermediate product LM1(C1')-(O4') is unlikely to be stable and the C(1')-O(4') bond-broken is not favored. The activation energy of the C(4')-O(4') bond rupture process amounts to 20.5 kcal/mol. The total energy of the C(4')-O(4') bond broken product is about 6.5 kcal/mol lower than that of the reactant dT(*-). The subsequent N1-glycosidic bond breaking process is found to have a very low energy barrier. Therefore, the LEE-induced base release through the C(4')-O(4') bond rupture might be a possible pathway.     

The capacity of an α-nitroalkyl radical for hydrogen abstraction

Photochemical decomposition of 2-iodo-2-nitroadamantane in several hydrogen donating solvents, gives rise to formation of α-nitroalkyl radicals. Such ambident radicals can abstract hydrogen from the solvent via oxygen, resulting in a nitronic acid which decomposes exlusively into adamantanone. Alternately the abstraction can take place via carbon to give 2-nitroadamantane. The product distribution is strongly influenced by electron-withdrawing substituents in the hydrogen donor. The oxidation products derived from the solvent have been detected. All the experiments point towards a minor stabilisation of a carbon radical by a nitro group. INDO-calculations on the nitromethyl radical are in good agreement with this lack of stabilization.     

Design of Ag3PO4 for highly enhanced photocatalyst using hydroxyapatite as a source of phosphate ion

The effect of hydroxyapatite on structure, particle size, and band gap energy of silver orthophosphate (Ag₃PO₄) have been investigated. The hydroxyapatite as a source of phosphate ion was prepared using the coprecipitation of CaCl₂ and KH₂PO₄. To produce the product of Ag₃PO₄, the as-synthesized hydroxyapatite was suspended in water and quickly added to a silver nitrate solution. The obtained photocatalysts were characterized using XRD, SEM, DRS, and XPS. The high crystallinity of single phase Ag₃PO₄ was easily produced using the hydroxyapatite. Photocatalytic activities of the product were evaluated using RhB decomposition under blue light irradiation. The hydroxyapatite as a source of phosphate ion dramatically decreases the particle size and increases the absorption in the visible region. This obtained photocatalyst significantly improves the photocatalytic activity. The mechanism of reaction works in the following order: holes > superoxide radical > hydroxyl radical.     

Chlorine initiated photooxidation studies of hydrochlorofluorocarbons (HCFCs) and hydrofluorocarbons (HFCs): Results for HCFC-22 (CHClF2); HFC-41 (CH3F); HCFC-124 (CClFHCF3); HFC-125 (CF3CHF2); HFC-134a (CF3CH2F); HCFC-142b (CClF2CH3); and HFC-152a (CHF2CH3)

Data on the tropospheric degradation of proposed substitutes for ozone depleting CFCs were obtained by conducting photochemical oxidation studies of HCFCs and HFCs using long path Fourier transform infrared spectroscopy. The hydrogen abstraction reactions were initiated using Cl radicals rather than OH radicals because of the rather unreactive nature of the compounds. The experimental product yields at T = 25 ± 3°C and 700 Torr of dry air were: CHClF₂ (1.11 ± 0.06 C(O)F₂); CClFHCF₃ (1.00 ± 0.04 CF₃C(O)F); CF₃CHF₂ (1.09 ± 0.05 C(O)F₂); CClF₂CH₃ (0.98 ± 0.03 C(O)F₂); CHF₂CH₃ (1.00 ± 0.05 C(O)F₂); CF₃CH₂F (0.16 ± 0.03 CF₃CF(O), and 0.83 ± 0.22 HFC(O)), where all standard deviations are 2σ. For each compound, the critical step in determining the oxidation products was the decomposition of a halogenated alkoxy radical. For HCFC-22 and HCFC-124, the major alkoxy radical decomposition route was Cl elimination. The HFC-125 product data were consistent with C? C cleavage of a two carbon alkoxy radical as the major decomposition route whereas both C? C cleavage and H abstraction by O₂ were significant contributors to the decomposition of the HFC-134a alkoxy radical. Secondary Cl reactions in the HCFC-142b and HFC-152a experiments prevented an unambiguous determination of the decomposition modes; the data are consistent with both C? C bond scission and Cl reactions with halogenated aldehydes producing the oxidation product C(O)F₂. With the exception of the HFC-134a and HFC-125 data, the proposed mechanisms can account for the major oxidation products. For HFC-134a and HFC-125, a number of product bands could not be identified. The bands are likely due to products from reactions involving the CF₃O₂ radical. © John Wiley & Sons, Inc.     

Effects of olefins on the thermal decomposition of propane part III. Some remarks on the kinetics of decomposition

Conditions of applicability of quasi-steady-state kinetic treatment have been investigated with respect to the explanation of the decomposition of propane and the influence of ethylene on this. From the measured rate of accumulation of ethane and from the relations between the kinetic equations describing product formation, the rate parameters of the initiation reactions were determined, for which the temperature-dependences and were found. In the decomposition of propane under the examined conditions, the chain length exceeds 500. In response to ethylene the chain length significantly decreases, but even in this case the decomposition chains are long enough for it to be assumed that the ratios of radical concentrations are governed by the propagation steps. Calculations demonstrated that the actual radical concentration during a sufficiently short induction period approximates to the stationary concentration, so that it does not seriously affect the accuracy of the kinetic treatment.     

Trajectory calculations of OH radical- and Cl atom-initiated reaction of glyoxal: atmospheric chemistry of the HC(O)CO radical

On-the-fly quasi-classical trajectory calculations using the density functional method were carried out to investigate the dynamics of the HC(O)CO radical, formed by OH radical- and Cl atom-initiated reactions of glyoxal at 298 K. The energy difference between the A' HC(O)CO radical, formed immediately after H atom abstraction, and the most stable A″ HC(O)CO radical is estimated to be 6.0 kcal mol(-1). The surplus energy followed by relaxation from A' HC(O)CO to A″ HC(O)CO goes to internal energy of the nascent HC(O)CO radicals and causes prompt decomposition into HCO + CO. The average internal energy partitioned into the HC(O)CO radical is higher in the OH reaction than in the Cl reaction, in accordance with exothermicity of the reactions. A fraction of the nascent HC(O)CO radicals (91% for the OH reaction and 47% for the Cl reaction) promptly decomposes into HCO and CO within 2.5 ps. The remaining HC(O)CO radicals, which do not undergo prompt decomposition, decompose thermally or add with O(2) in the presence of O(2). I re-evaluated the previous two experiment results of the product yield ratio [CO]/[CO(2)] vs. [O(2)](-1) in the Cl atom-initiated reaction, in light of the reaction mechanism involving prompt decomposition. The two results give 9.5 × 10(6) s(-1) and 1.08 × 10(7) s(-1) for the thermal decomposition rate and 47% and 41% for the fraction of prompt decomposition in the Cl atom-initiated reaction, in good agreement with the present trajectory calculation.     

The IR laser photochemistry of methyl-substituted tetrahydrofurans

The products from the decomposition of 2-methyltetrahydrofuran (2-MTHF), a mixture of cis- and trans-2,5-dimethyltetrahydrofuran (2,5-DMTHF) and 3-methyltetrahydrofuran (3-MTHF) induced by a pulsed CO₂ laser were determined by gas chromatography as a function of the reactant pressure, the focal length of the lens and the SiF₄ sensitization. The major hydrocarbon products at a pressure of 0.3 Torr were C₂H₄ (2-MTHF), C₃H₆ (2,5-DMTHF) and 1-C₄H₈ (3-MTHF). With a tenfold increase in pressure C₂H₄ became a major hydrocarbon product for all three methyl-substituted tetrahydrofurans. At 10 Torr, CO was the major oxygenated species for 2-MTHF and 2,5-DMTHF, whereas for 3-MTHF it was H₂CO. For 2-MTHF the product distribution was interpreted as arising principally from breakage of the CO bond and a ring CC bond to form C₂H₄ and a 1,3 diradical. The product distribution from 2,5-DMTHF at low pressure was explained by cleavage of CH₃ followed by decomposition of the resulting tetrahydrofuranyl radical. Both the diradical and CH₃ cleavage mechanisms were used to account for the product distribution from 3-MTHF.