Group 4 complexes of a tert-butylphosphine-bridged biphenolate ligand

The coordination chemistry of group 4 complexes supported by the tridentate, dianionic biphenolate phosphine ligand that carries a phosphorus-bound tert-butyl group, 2,2'-tert-butylphosphino-bis(4,6-di-tert-butylphenolate) ([(t)Bu-OPO](2-)), is described. Metathetical reactions of {[(t)Bu-OPO]Li(2)(DME)}(2) with 2 or 1 equiv of TiCl(4)(THF)(2) selectively produce [(t)Bu-OPO]TiCl(2)(THF) (1a) and Ti[(t)Bu-OPO](2) (2a), respectively. Protonolysis of Ti(O(i)Pr)(4) with 2 or 1 equiv of H(2)[(t)Bu-OPO] cleanly generates 2a and [(t)Bu-OPO]Ti(O(i)Pr)(2) (3a), respectively. Complex 1a can alternatively be prepared from comproportionation of 2a with 1 equiv of TiCl(4)(THF)(2). Treatment of 1a with 2 equiv of NaO(t)Bu affords [(t)Bu-OPO]Ti(O(t)Bu)(2) (4a). In contrast, reactions of {[(t)Bu-OPO]Li(2)(DME)}(2) with ZrCl(4)(THF)(2) or HfCl(4)(THF)(2), regardless of stoichiometry of the starting materials employed, selectively give bis-ligated M[(t)Bu-OPO](2) [M = Zr (2b), Hf (2c)]. Comproportionation of 2b,c with MCl(4)(THF)(2) (M = Zr, Hf) leads to the formation of [(t)Bu-OPO]MCl(2)(THF) [M = Zr (1b), Hf (1c)], which, upon being treated with 2 equiv of NaO(t)Bu, generates [(t)Bu-OPO]M(O(t)Bu)(2)(THF) (4b,c). These synthetic results are markedly different from those obtained from analogous reactions employing a biphenolate phosphine ligand bearing a phosphorus-bound phenyl group ([Ph-OPO](2-)), highlighting a profound phosphorus substituent effect on complex conformation. The alkoxide complexes 3a and 4a-c are all active initiators for catalytic ring-opening polymerization of ε-caprolactone. To assess the potential phosphorus substituent effect on catalysis, [Ph-OPO]Ti(O(i)Pr)(2) (5a) was prepared, and its reactivity was examined. Interestingly, polymers prepared from 3a are characterized by low polydispersities with molecular weights that are linearly dependent on the monomer-to-initiator ratio, thus featuring a living system. The polydispersitiy indexes of polymers prepared from 5a, however, are relatively larger, indicative of the significance of the phosphorus-bound tert-butyl group in 3a in view of discouraging the undesirable transesterification.     

New titanium complexes with symmetric or asymmetric cis-9,10-dihydrophenanthrenediamide ligands formed through sequential intramolecular C-C bond-forming reactions

A series of new titanium(IV) complexes with symmetric or asymmetric cis-9,10-dihydrophenanthrenediamide ligands, cis-9,10-PhenH(2)(NR)(2)Ti(O(i)Pr)(2) [PhenH(2) = 9,10-dihydrophenanthrene, R = 2,6-(i)Pr(2)C(6)H(3) (2a), 2,6-Et(2)C(6)H(3) (2b), 2,6-Me(2)C(6)H(3) (2c)], cis-9,10-PhenH(2)(NR(1))(NR(2))Ti(O(i)Pr)(2) [R(1) = 2,6-(i)Pr(2)C(6)H(3), R(2) = 2,6-Et(2)C(6)H(3) (2d); R(1) = 2,6-(i)Pr(2)C(6)H(3), R(2) = 2,6-Me(2)C(6)H(3) (2e)], and [cis-9,10-PhenH(2)(NR(1))(2)][o-C(6)H(4)(CH=NR(2))]TiO(i)Pr [R(1) = 2,6-(i)Pr(2)C(6)H(3), R(2) = 2,6-Et(2)C(6)H(3) (3a); R(1) = 2,6-(i)Pr(2)C(6)H(3), 2,6-Me(2)C(6)H(3) (3b)], have been synthesized from the reactions of TiCl(2)(O(i)Pr)(2) with o-C(6)H(4)(CH=NR)Li [R = 2,6-(i)Pr(2)C(6)H(3), 2,6-Et(2)C(6)H(3), 2,6-Me(2)C(6)H(3)]. The symmetric complexes 2a-2c were obtained from the reactions of TiCl(2)(O(i)Pr)(2) with 2 equiv of the corresponding o-C(6)H(4)(CH=NR)Li followed by intramolecular C-C bond-forming reductive elimination and oxidative coupling processes, while the asymmetric complexes 2d-2e were formed from the reaction of TiCl(2)(O(i)Pr)(2) with two different types of o-C(6)H(4)(CH=NR)Li sequentially. The complexes 3a and 3b were also isolated from the reactions for complexes 2d and 2e. All complexes were characterized by (1)H and (13)C NMR spectroscopy, and the molecular structures of 2a, 2b, 2e, and 3a were determined by X-ray crystallography.     

含苄氯端基β-蒎烯大分子引发剂及嵌段共聚物的合成

在 - 40℃下 ,CH2 Cl2 中以α 氯代乙苯为引发剂 ,Ti(OiPr) 4 TiCl4复合物 (摩尔比为 1 3)为Lewis酸活化剂、nBu4NCl存在下先进行 β 蒎烯的活性聚合 ,30min后当单体转化率接近 10 0 %时 ,加入苯乙烯引发其活性聚合 .在苯乙烯低转化率 (15 %左右 )下终止反应 ,得到由 3～ 5个苯乙烯链节封端带苄氯端基的聚 β 蒎烯大分子引发剂 .1 H NMR分析表明每个大分子引发剂所带的苄氯端基数接近 1(1 1) .大分子引发剂与Ti(OiPr) 4 TiCl4复合后 ,CH2 Cl2 中 - 40℃下能顺利引发苯乙烯阳离子聚合 ,获得 β 蒎烯 苯乙烯嵌段共聚物 ;与氯化亚铜(CuCl) 2 ,2′ 联二吡啶 (bipy)复合 ,组成原子转移自由基聚合 (ATRP)引发体系 ,在甲苯中 110℃引发甲基丙烯酸甲酯 (MMA)自由基聚合 ,得到 β 蒎烯 MMA嵌段共聚物 ,但此时大分子引发剂的引发效率小于 10 0 %     

Mononuclear Titanium Complexes That Contain Aminopyridinato Ligands

2-(Methylamino)pyridine (Me-APy-H), 2-anilinopyridine (Ph-APy-H), and 4-methyl-2-((trimethylsilyl)amino)pyridine (TMS-APy-H) were used to synthesize mononuclear monochloro complexes that contain two or three such aminopyridines as strained amido ligands. The reaction of 2 or 3 equiv of in situ generated lithium aminopyridinate with TiCl(4)(THF)(2) or TiCl(4) afforded just in the case of Me-APy-H a red crystalline product (Me-APy)(3)TiCl (1a) but in unacceptably low yield. An alternative way to synthesize 1a and (Ph-APy)(3)TiCl (1b) is amine elimination, starting from mixed chlorodimethylamido complexes like (Me(2)N)(3)TiCl or (Me(2)N)(2)TiCl(2). The reaction of (Me(2)N)(3)TiCl with 2 equiv of Me-APy-H, Ph-APy-H or TMS-APy-H afforded (Me-APy)(2)Ti(NMe(2))Cl (2a), (Ph-APy)(2)Ti(NMe(2))Cl (2b), or (TMS-APy)(2)Ti(NMe(2))Cl (2c). These compounds represent novel unusual highly nitrogen-coordinated titanium complexes. X-ray diffraction studies of 1a established its monomeric structure as having a disturbed pentagonal bipyramidal coordination geometry. X-ray crystal structure investigations of 2a-c proved these compounds to be monomeric with a slightly distorted octahedral coordination geometry. The eta(2) binding mode of the strained aminopyridinato ligands is discussed in comparison to the related amidinato ligand system by averaging bond distances and angles of the determined structures. The N(Py)-C-N(amido) angle of 108(1) degrees instead of the desired 120 degrees indicates the highly strained tweezers-like bonding mode. The Ti-N(Py) distances vary within the known range. The Ti-N(amido) distances are more than 0.1 ? longer than the expected values and indicate weak amido bonds. Variable-temperature NMR investigations of complex 2c are indicative of exchange processes which proceed most likely via tetrahedral transition states. Crystallographic data (distances, ?; angles, deg): 1a, C(18)H(21)ClN(6)Ti, a = 9.313(1), b = 10.277(1), c = 11.302(1), alpha = 98.15(1), beta = 108.28(1), gamma = 102.98(1), triclinic, P&onemacr;, Z = 2; 2a, C(14)H(20)ClN(5)Ti, a = 8.725(1), b = 9.258(1), c = 10.778(1), alpha = 83.288(7), beta = 79.977(9), gamma = 78.766(8), triclinic, P&onemacr;, Z = 2; 2b, C(24)H(24)ClN(5)Ti, a = 17.652(3), b = 7.959(1), c = 18.017(3), beta = 111.37(1), monoclinic, P2(1)/a, Z = 4; 2c, C(20)H(36)ClN(5)Si(2)Ti, a = 10.786(1), b = 14.053(1), c = 18.144(1), beta = 97.06(1), monoclinic, P2(1)/c, Z = 4.     

Syntheses and characterization of titanium(IV) and titanium(III) complexes with (2-dimethylphosphino)ethane-1-thiolate and (3-dimethylphosphino)propane-1-thiolate as ligands

Reactions of Cp(2)TiCl(2) (Cp = eta(5)-cyclopentadienide) with 2 or 1 equiv of hybrid P-S ligands (L), (CH(3))(2)P(CH(2))(n)()S(-) (n = 2, dmpet; n = 3, dmppt), produced new dicyclopentadienyltitanium(IV) complexes with L, Cp(2)Ti(L-kappaS)(2) (1, L = dmpet; 2, L = dmppt) and [Cp(2)Ti(L-kappa(2)S,P)]BPh(4) (3, L = dmpet; 4, L = dmppt). The Ti(III) complexes, Cp(2)Ti(L-kappa(2)S,P) (5, L = dmpet; 6, L = dmppt), were prepared by the reaction of Cp(2)Ti(eta(3)-C(3)H(5)) with 1 equiv of L. The structures of complexes 1-6 were confirmed by X-ray diffraction analyses. It was found that complexes 3 and 5 were isostructural around Ti(IV) and Ti(III) centers: the Ti(IV)-S bond length in 3 (2.3498(9) A) is shorter by 0.14 A than Ti(III)-S in 5 (2.4877(7) A), while Ti(IV)-P (2.534(1) A) was merely 0.05 A shorter than Ti(III)-P (2.5844(7) A). The redox potential between 3 and 5 in acetonitrile was -1.14 V vs the ferricinium/ferrocene couple. A heterobimetallic complex that has the frame of complex 1, [Cp(2)Ti(dmpet)(2)Cu]PF(6) (7), was also isolated and structurally characterized: the Ti-Cu distance (2.95(1) A) was shorter than that in [Cp(2)Ti(SC(2)H(4)PPh(2))(2)Cu]BF(4), previously reported by White and Stephan. Structural characterization was also carried out for CpTi(dmpet-kappaS)(2)(dmpet-kappa(2)S,P) (8) and CpTiCl(2)(dmppt-kappa(2)S,P) (9), which were obtained by the reactions of Cp(or Cp)TiCl(3) (Cp = eta(5)-C(5)Me(5)(-)) with n equiv (n = 1-3) of L. The mutual site-exchange reaction between phosphorus atoms on a coordinated dmpet in the kappa(2)S,P mode and on two other coordinated dmpet's in the kappaS mode within complex 8 was analyzed by the variable-temperature (31)P[(1)H] dynamic NMR method. The kinetic parameters for this process, k(ex)(298) = 1.9 x 10(5) s(-)(1), DeltaH = 48 kJ mol(-)(1), and DeltaS = 17 J mol(-)(1) K(-)(1), as well as the rather long Ti(IV)-P distance (2.652(1) A), indicate the fluxional nature of the coordination geometry in complex 8.     

Group-4 eta(1)-pyrrolyl complexes incorporating N,N-di(pyrrolyl-alpha-methyl)-N-methylamine

Syntheses and properties of group-4 complexes incorporating the tridentate, dianionic ligand N,N-(dipyrrolyl-alpha-methyl)-N-methylamine, dpma, have been investigated. Addition of 1 equiv of H(2)dpma to Ti(NMe(2))(4) and Zr(NMe(2))(4) results in transamination with 2 dimethylamides providing Ti(NMe(2))(2)(dpma) and Zr(NMe(2))(2)(NHMe(2))(dpma), respectively. Addition of 2 equiv of H(2)dpma to Zr(NMe(2))(4) and Hf(NMe(2))(4) results in production of the homoleptic complexes Zr(dpma)(2) and Hf(dpma)(2). Conversely, treatment of Ti(NMe(2))(4) with 2 equiv of H(2)dpma does not provide Ti(dpma)(2), which was available by addition of 2 Li(2)dpma to TiCl(4). The properties of the isostructural series M(dpma)(2) were investigated by single crystal X-ray diffraction, cyclic voltammetry, (14)N NMR, and other techniques. By (14)N NMR, it was found that the pyrrolyl resonance chemical shift changes approximately linearly with the electronegativity of the metal center, which was attributed to pi-interaction between the pyrrolyl nitrogen lone pair and the metal. Other complexes produced during this study include Ti(CH(2)SiMe(3))(NMe(2))(dpma), TiCl(2)(THF)(dpma), and Ti(OCH(2)CF(3))(2)(THF)(dpma). Two isomers for Ti(CH(2)SiMe(3))(NMe(2))(dpma) were isolated and characterized.     

Crystallographic characterisation of Ti(IV) piperazine complexes and their exploitation for the ring opening polymerisation of rac-lactide

In this paper a series of eight Ti(IV) piperazine based complexes have been prepared and fully characterised in the solid-state by X-ray crystallography and in solution via NMR spectroscopy. In the solid-state either Ti(2)(L)(O(i)Pr)(6) or Ti(2)(L)(2)(O(i)Pr)(4) were observed depending upon the nature of the starting ligand. For complexes with less sterically demanding ligands (1H(2) and 2H(2)) an equilibrium was observed: 2 Ti(2)(L)(O(i)Pr)(6) ? Ti(2)(L)(2)(O(i)Pr)(4) + 2 Ti(O(i)Pr)(4). The thermodynamic properties (ΔG, ΔH and ΔS) have been investigated via variable temperature NMR spectroscopy. With more sterically demanding ligands (3-8H(2)) the Ti(2)(L)(O(i)Pr)(6) form was the most prevalent in the solid-state and in solution. These complexes have been tested for the production of polylactide under melt and solution conditions with high conversions being obtained.     

Heterobimetallic Bi(III)-Ti(IV) coordination complexes: synthesis and solid-state structures of BiTi4(sal)6(mu-OiPr)3(OiPr)4, and the cyclic isomers Bi4Ti4(sal)10(mu-OiPr)4(OiPr)4 and Bi8Ti8(sal)20(mu-OiPr)8(OiPr)8

The reaction of a 1:2 mixture of bismuth(III) salicylate with titanium(IV) isopropoxide in refluxing toluene has been investigated and found to proceed with ligand exchange to produce the new heterobimetallic complexes BiTi(4)(sal)(6)(mu-O(i)Pr)(3)(O(i)Pr)(4) (1), Bi(4)Ti(4)(sal)(10)(mu-O(i)Pr)(4)(O(i)Pr)(4) (2), and Bi(8)Ti(8)(sal)(20)(mu-O(i)Pr)(8)(O(i)Pr)(8) (3). Complex 1 is the major product, while 2 and 3 were identified as minor products from the reaction. Compound 1 is produced pure and in high yield by employing stoichiometric amounts of reagents; its crystal structure consists of a [Ti(4)(sal)(6)(O(i)Pr)(7)](3)(-) ion capped by a Bi(3+) ion. Complexes 2 and 3 exhibit cyclic ring structures of bismuth and titanium atoms showing crystallographically imposed inversion symmetry. Both structures occlude large quantities of lattice solvent. The compositional and structural parameters from the single crystal studies indicate that complexes 2 and 3 may represent sequential steps in a ligand exchange process between the two metal species, while the reactivity patterns that were observed provide clues about the solution state structure of bismuth(III) salicylate itself. The 2D COSY (1)H NMR spectrum of 1 indicates retention of the asymmetric structure in solution as evidenced by the presence of 14 diastereotopic isopropoxide methyl resonances.     

Preparation of new monoanionic "scorpionate" ligands: synthesis and structural characterization of titanium(IV) complexes bearing this class of ligand

The preparation of new "scorpionate" ligands in the form of the lithium derivatives [(Li(bdmpzdta)(H(2)O))(4)] (1) [bdmpzdta = bis(3,5-dimethylpyrazol-1-yl)dithioacetate], [Li(bdphpza)(H(2)O)(THF)] (2) [bdphpza = bis(3,5-diphenylpyrazol-1-yl)acetate], and [Li(bdphpzdta)(H(2)O)(THF)] (3) [bdphpzdta = bis(3,5-diphenylpyrazol-1-yl)dithioacetate] has been carried out. Furthermore, a series of titanium complexes has been prepared by reaction of TiCl(4)(THF)(2) with the lithium reagents [(Li(bdmpza)(H(2)O))(4)] (4) [bdmpza = bis(3,5-dimethylpyrazol-1-yl)acetate] and 1. Under the appropriate experimental conditions neutral complexes, namely [TiCl(3)(kappa(3)-bdmpza)] (5), [TiCl(3)(kappa(3)-bdmpzdta)] (6), and [TiCl(2)(kappa(2)-bdmpzdta)(2)] (7), and cationic complexes, namely [TiCl(2)(THF)(kappa(3)-bdmpza)]Cl (8) and [TiCl(2)(THF)(kappa(3)-bdmpzdta)]Cl (9), were isolated. Complexes 8 and 9 undergo an interesting nucleophilic THF ring-opening reaction to give the corresponding alkoxide-containing species [TiCl(2)(kappa(3)-bdmpza)(O(CH(2))(4)Cl)] (10) and [TiCl(2)(kappa(3)-bdmpzdta)(O(CH(2))(4)Cl)] (11). A family of alkoxide-containing complexes of general formulas [TiCl(2)(kappa(3)-bdmpza)(OR)] [R = Me (12); R = Et (14); R = (i)Pr (16); R = (t)Bu (18)] and [TiCl(2)(kappa(3)-bdmpzdta)(OR)] [R = Me (13); R = Et (15); R = (i)Pr (17)] was also prepared. The structures of these complexes have been determined by spectroscopic methods, and in addition, the X-ray crystal structures of 3, 7, 10, and 11 were also established.     

Interplay between lead carboxylate and Ti or Zr isopropoxides in solution routes to perovskites: synthesis, molecular structures and reactivity of single source non-oxo Pb-Zr and Pb-Ti carboxylatoalkoxides supported by 2-ethylhexanoate ligands

The reactions between Ti(O(i)Pr)(4) and Zr(2)(O(i)Pr)(8)(HO(i)Pr)(2), respectively, and lead 2-ethylhexanoate Pb(O(2)CC(7)H(15))(2) have been investigated at rt and by heating. The initial mixed-metal species, characterized by single-crystal X-Ray diffraction, were adducts namely Pb(4)Zr(4)(mu-O(2)CR')(8)(mu-OR)(6)(mu(3)-OR)(2)(OR)(8)(OHR)(2) and Pb(2)Ti(4)(mu-O(2)CR')(4)(mu-OR)(6)(mu(3)-OR)(2)(OR)(8) (R' = CHCH(Et)C(2)H(4)Me, R = (i)Pr) independently of the stoichiometry used. They are the first Pb-Ti and Pb-Zr non-oxo carboxylatoalkoxides reported. is also the first Pb-Zr species based on an alkoxide-carboxylate ligand set matching the PbZrO(3) stoichiometry. Both structures are centrosymmetric with six-coordinate transition metals, as required for the perovskite, and are based on triangular M(2)Pb cores (M = Zr, Ti). The lead centers display quite high coordination numbers, six and seven. The thermal and hydrolytic condensation reactions of and were investigated. Heat treatment of and elimination of the volatiles under vacuum afforded Pb(2)Ti(3)(mu(4)-O)(mu(3)-O)(mu-O(2)CC(7)H(15))(2)(mu-O(i)Pr)(6)(O(i)Pr)(4) resulting from extrusion of Ti(O(i)Pr)(4) and scrambling of carboxylate ligands. Characterization of the various compounds was achieved by elemental analysis, FT-IR, (1)H and (207)Pb NMR.     

Titanium complexes supported by an [OSSO]-type bis(phenolato) ligand based on a trans-cyclooctanediyl platform: synthesis, structures, and 1-hexene polymerization

trans-Cyclooctanediyl-bridged [OSSO]-type ligand 4 reacts with TiCl(4)(thf)(2) in toluene to produce the corresponding titanium(IV) dichloro complexes as an inseparable mixture of cis-α isomer 6a and cis-β isomer 6b in a ratio of 2:1, whereas treatment of dilithio salt of 4 with TiCl(3)(thf)(3) in Et(2)O afforded chloride-bridged dimeric titanium(III) complex 8, which indicated the antiferromagnetic character in a nonpolar solvent solution. Di(isopropoxy) titanium(IV) complex 10 having a C(2)-symmetric cis-α configuration was synthesized by the reaction of 4 with Ti(O(i)Pr)(4) in toluene as yellow crystals. Moreover, the reaction of 4 with Ti(NEt(2))(4) in toluene resulted in the unexpected formation of [OSSO]-type bis(phenolato)-bridged dinuclear diamido titanium(IV) complex 11, which adopted a distorted tetrahedral geometry on the titanium center. These titanium complexes were characterized on the basis of their NMR spectroscopic data, and the molecular structures of complexes 8, 10, and 11 were established by single crystal X-ray diffraction. The titanium(IV) and (III) complexes 6 and 8 upon activation with a cocatalyst in toluene polymerized 1-hexene isospecifically to produce poly(1-hexene) having high molecular weight (M(w) = 22,000-52,000 g mol(-1)) and relatively narrow polydispersity (M(w)/M(n) = 1.7-1.8), albeit with low activity [0.27-1.0 g mmol(cat)(-1) h(-1)].     

High-temperature single-site ethylene polymerization behavior of titanate complexes supported by 1,3-bis(3,5-dialkylpyrazol-1-yl)propan-2-olate ligation

Titanate(1-) complexes Na[(THF)(kappa1-O-bdbpzp)TiCl4] (1) and Na[(THF)(kappa1-O-bdmpzp)TiCl4] (2) and titanate(2-) complexes [Na(THF)]2[(kappa1-O-bdbpzp)2TiCl4] (4) and [Na(THF)]2[(kappa1-O-bdmpzp)2TiCl4] (5) were obtained in good yield from reaction of Na[bdbpzp] or Na[bdmpzp] (sodium salt of 1,3-bis(3,5-di-tert-butylpyrazol-1yl)propan-2-ol or 1,3-bis(3,5-dimethylpyrazol-1yl)propan-2-ol) with TiCl4 (in the appropriate molar ratio) at 0-25 degrees C. Protonolysis of TiCl4 with 1 equiv of bdmpzpH furnished related zwitterionic titanate(1-) complex 3 that possessed a kappa2-N,O-coordinated pyrazolyl-alkoxide with pendant pyrazolium group. Methylalumoxane (MAO) activation of 1-5 under high-temperature solution polymerization conditions produced active single-site ethylene polymerization catalysts that exhibit considerably higher thermal stability (especially 2/MAO, 3/MAO, and 5/MAO) than previously reported for Cp2TiCl2/MAO or Ti catalysts supported by related heteroscorpionate or scorpionate ligation.     

Dizinc alkoxides and amides supported by binucleating bis(amidoamine) ligands

Several new dizinc complexes that are supported by dianionic bis(amidoamine) ligands are reported. Reaction of N,N'-bis(2-dimethylaminoethyl)dibenzofuran-4,6-diamine ((Me)LH(2)) with 2 equiv of EtZn(O(i)Pr) forms the dizinc bis(alkoxide) (Me)LZn2(O(i)Pr)2 (1), which was isolated in 76% yield. Similarly, (Me)LH2 reacts cleanly with EtZn(OPh) and EtZn(OCHPh2) to form (Me)LZn2(OPh)2 (2) and (Me)LZn2(OCHPh2)2 (3), respectively. The solid-state structures of 1 and 2 feature puckered [Zn2(mu-OR)2]2+ cores, with short intermetal separations (2.81-2.88 Angstroms). Overall, the molecules have approximate (noncrystallographic) C2v symmetry. The use of the more-hindered (i)Pr-substituted ligand N,N'-bis(2-diisopropylaminoethyl)dibenzofuran-4,6-diamine (i(Pr)LH2) to prepare zinc alkoxides gave similar results. Thus, reaction of i(Pr)LH2 with 2 equiv of EtZn(OPh), EtZn(OMe), EtZn(OCHPh2), and EtZn(OCH2Ph) forms i(Pr)LZn2(OPh)2 (4), i(Pr)LZn2(OMe)2 (5), i(Pr)LZn2(OCHPh2)2 (6), and i(Pr)LZn2(OCH2Ph)2 (7), respectively (isolated yields 48-63%). At 70 degrees C, C6D6 solutions of 6 undergo beta-hydride transfer with 2 equiv of benzaldehyde to form 7 and benzophenone in quantitative yield (according to 1H NMR spectroscopy). Benzene solutions of 1 react with 1 equiv of trimethylsilyl trifluoromethanesulfonate (Me3SiOTf) to form (Me)LZn2(O(i)Pr)(OTf) (8) in 70% isolated yield. In the solid state, 8 features a bridging alkoxide donor as well as a 1,3-bridging triflate group. The previously reported dinuclear organozinc species (Me)LZn2Ph2 (9) reacts with 1 equiv of tert-butylamine to form the protonolysis product (Me)LZn2(Ph)(NH(t)Bu) (10) in 66% isolated yield. The solid-state structure of 10 (two independent molecules) reveals a somewhat asymmetric [Zn2(mu-Ph)(mu-NH(t)Bu)]2+ core with short Zn-Zn separations [2.6761(5) and 2.6518(5) Angstroms]. In CD2Cl2 solution, the Ph bridge of 10 undergoes rapid reversible cleavage. Cleavage of this bridging interaction followed by rotation about the Zn-Ph bond and re-formation of the bridging interaction results in exchange of the inequivalent ortho (and meta) protons of the phenyl ligand. Variable-temperature 1H NMR spectroscopic data indicate that this exchange occurs with DeltaG = 12.7(1) kcal.mol(-1) (-27 degrees C). At 75 degrees C, toluene solutions of (Me)LH2 react with 2 equiv of EtZnNH(t)Bu to form the dizinc bis(amido) product (Me)LZn2(NH(t)Bu)2 (11) in 46% isolated yield. The solid-state structure of 11 (two independent molecules) features a puckered and fairly symmetric [Zn2(mu-NH(t)Bu)2]2+ core with short intermetal separations [2.775(1), 2.760(1) Angstroms].     

Synthesis and characterization of mononuclear iron silanethiolato complexes containing an unsupported Fe-S-Si bond system: X-ray crystal structure of CpFe(CO)2SSiPh3 and its reaction with SO2

Mononuclear iron silanethiolato complexes of the type CpFe(CO)(2)SSiR(3), where R = Ph (1a) and (i)()Pr (1b), were prepared via treatment of [CpFe(CO)(2)(THF)]BF(4) with LiSSiPh(3).Et(2)O and NaSSi(i)()Pr(3), respectively. The molecular structure of 1a was determined by X-ray crystallography. Complex 1a was reacted with 1 equiv of SO(2) to give the corresponding O-silyl thiosulfite, CpFe(CO)(2)SS(O)OSiPh(3) (2), via 1,2-insertion of SO(2) into the S-Si bond. This reaction models the activation of SO(2) in the homogeneously catalyzed Claus process.     

The role of neutral coligands on the stabilization of mono-Tp(i)Pr2 U(III) complexes

The reaction of [UI(3)(THF)(4)] with 1 equiv of KTp()i(Pr)()2 in toluene in the presence of several neutral coligands allowed the synthesis of a novel family of mono-Tp()i(Pr)()2 complexes, [UI(2)Tp()i(Pr)()2(L)(x)()] [L = OPPh(3), x = 1 (3); L = C(5)H(5)N, x = 2 (4); L = Hpz()t(Bu,Me), x = 2 (5); and L = bipy, x = 1 (6)]. The adduct with THF, [UI(2)Tp()i(Pr)()2(THF)(2)(-)(3)] (1), could also be isolated by reacting [UI(3)(THF)(4)] with 1 equiv of KTp()i(Pr)()2 in tetrahydrofuran. However, complex 1 is not a good starting material to enter into the mono-Tp()i(Pr)()2 U(III) complexes as it decomposes in solution, leading to mixtures of U(III) species coordinated with Hpz()i(Pr)()2. The solid-state structures of 3, 4, and 6 were determined by single-crystal X-ray diffraction and revealed that this family of mono-Tp()i(Pr)()2 complexes can be six- (3) or seven-coordinated (4 and 6), depending on the nature of the neutral coligand. Complex 3 displays distorted octahedral coordination geometry, while 4 and 6 display distorted pentagonal bipyramid and capped octahedral geometries, respectively. Complexes 3 and 6 are static in solution, and the patterns of the (1)H NMR spectra are consistent with the C(s)() symmetry found in the solid state. The other complexes (1, 4, and 5) are fluxional, but the dynamic processes involved can be slowed by decreasing the temperature.     

Synthesis and Characterizations of Ti(O‐i‐Pr)Cl3(THF)(PhCOR) (R = H,Me, Ph) and Ti(O‐i‐Pr)Cl3(PhCOR)2 (R = Me,Ph). The Molecular Structure of Ti(O‐i‐Pr)Cl3(PhCOPh)2

A series of titanium(IV) complexes Ti(O‐i‐Pr)Cl₃(THF)(PhCOR) (R = H ( 1 ), CH₃ ( 2 ), or Ph ( 3 )) is prepared quantitatively from reactions of [Ti(O‐i‐Pr)Cl₂(THF)(μ‐Cl)]₂ with 2 molar equiv. PhCOR. Treatment of Ti(O‐i‐Pr)Cl₃ with 2 molar equiv. of PhCOR affords the disubstituted complexes Ti(O‐i‐Pr)Cl₃(PhCOR)₂ (R = CH₃ ( 4 ) or Ph ( 5 )). The ¹³C NMR study of these complexes shows that the relative bonding abilities are in the order of PhCOCH₃ > PhCHO > PhCOPh. The molecular structure of 5 reveals that one of the benzophenone ligands is trans to the strongest 2‐propoxide ligand with a long Ti‐O(carbonyl) distance of 2.193(5) Å which is much longer than the other Ti‐O(carbonyl) distance of 2.097(4) Å by ?0.1 Å. All ligands cis to the alkoxide ligand are bending away from the alkoxide ligand with the RO‐Ti‐L angles ranging from 93.6(2) to 99.0(2)°.     

Stepwise modification of titanium alkoxy chloride compounds by pyridine carbinol

The stepwise modifications of stoichiometric mixtures of titanium chloride (TiCl 4) and titanium iso-propoxide (Ti(OPr (i)) 4) by 2-pyridine methanol (H-OPy) led to the isolation of a systematically varied, novel family of compounds. The 3:1 reaction mixture of Ti(OPr (i)) 4:TiCl 4 yielded [Cl(OPr (i)) 2Ti(mu-OPr (i))] 2 ( 1). Modification of 1 with 1 and 2 equiv of H-OPy produced [Cl(OPr (i)) 2Ti(mu c-OPy)] 2 ( 2, where mu c = chelating bridge) and "(OPy) 2TiCl(OPr (i))" ( 3, not crystallographically characterized), respectively. Altering the Ti(OPr (i)) 4 to TiCl 4 stoichiometry to 1:1 led to isolation and identification of another dimeric species [Cl 2(OPr (i))Ti(mu-OPr (i))] 2 ( 4). Upon modification with 1 equiv of H-OPy, [Cl 2(OPr (i))Ti(mu c-OPy)] 2 ( 5) was isolated from toluene and (OPy)TiCl 2(OPr (i))(py) ( 6) from py. An additional equivalent of H-OPy led to the monomeric species (OPy) 2TiCl 2 ( 7). Because of the low solubility and similarity in constructs of these compounds, additional analytical data, such as the beryllium dome or BeD-XRD powder analyses, were used to verify the bulk samples, which were found to be in agreement with the single crystal structures.     

Phosphato, chromato, and perrhenato complexes of titanium(IV) and zirconium(IV) containing Kläui's tripodal ligand

Treatment of titanyl sulfate in dilute sulfuric acid with 1 equiv of NaL(OEt) (L(OEt)(-) = [(eta(5)-C(5)H(5))Co{P(O)(OEt)(2)](3)](-)) in the presence of Na(3)PO(4) and Na(4)P(2)O(7) led to isolation of [(L(OEt)Ti)(3)(mu-O)(3)(mu(3-)PO(4))] (1) and [(L(OEt)Ti)(2)(mu-O)(mu-P(2)O(7))] (2), respectively. The structure of 1 consists of a Ti(3)O(3) core capped by a mu(3)-phosphato group. In 2, the [P(2)O(7)](4-) ligands binds to the two Ti's in a mu:eta(2),eta(2) fashion. Treatment of titanyl sulfate in dilute sulfuric acid with NaL(OEt) and 1.5 equiv of Na(2)Cr(2)O(7) gave [(L(OEt)Ti)(2)(mu-CrO(4))(3)] (3) that contains two L(OEt)Ti(3+) fragments bridged by three mu-CrO(4)(2-)-O,O' ligands. Complex 3 can act as a 6-electron oxidant and oxidize benzyl alcohol to give ca. 3 equiv of benzaldehyde. Treatment of [L(OEt)Ti(OTf)(3)] (OTf(-) = triflate) with [n-Bu(4)N][ReO(4)] afforded [[L(OEt)Ti(ReO(4))(2)](2)(mu-O)] (4). Treatment of [L(OEt)MF(3)] (M = Ti and Zr) with 3 equiv of [ReO(3)(OSiMe(3))] afforded [L(OEt)Ti(ReO(4))(3)] (5) and [L(OEt)Zr(ReO(4))(3)(H(2)O)] (6), respectively. Treatment of [L(OEt)MF(3)] with 2 equiv of [ReO(3)(OSiMe(3))] afforded [L(OEt)Ti(ReO(4))(2)F] (7) and [[L(OEt)Zr(ReO(4))(2)](2)(mu-F)(2)] (8), respectively, which reacted with Me(3)SiOTf to give [L(OEt)M(ReO(4))(2)(OTf)] (M = Ti (9), Zr (10)). Hydrolysis of [L(OEt)Zr(OTf)(3)] (11) with Na(2)WO(4).xH(2)O and wet CH(2)Cl(2) afforded the hydroxo-bridged complexes [[L(OEt)Zr(H(2)O)](3)(mu-OH)(3)(mu(3)-O)][OTf](4) (12) and [[L(OEt)Zr(H(2)O)(2)](2)(mu-OH)(2)][OTf](4) (13), respectively. The solid-state structures of 1-3, 6, and 11-13 have been established by X-ray crystallography. The L(OEt)Ti(IV) complexes can catalyze oxidation of methyl p-tolyl sulfide with tert-butyl hydroperoxide. The bimetallic Ti/ Re complexes 5 and 9 were found to be more active catalysts for the sulfide oxidation than other Ti(IV) complexes presumably because Re alkylperoxo species are involved as the reactive intermediates.     

Enhanced reducibility of Ce1-xTixO2 compared to that of CeO2 and higher redox catalytic activity of Ce1-x-yTixPtyO2-delta compared to that of Ce1-xPtxO2-delta

Nanocrystalline Ce(1)(-)(x)Ti(x)O(2) (0 < or = x < or = 0.4) and Ce(1-)(x)(-)(y)Ti(x)Pt(y)O(2)(-)(delta) (x = 0.15, y = 0.01, 0.02) solid solutions crystallizing in fluorite structure have been prepared by a single step solution combustion method. Temperature programmed reduction and XPS study of Ce(1)(-)(x)Ti(x)O(2) (x = 0.0-04) show complete reduction of Ti(4+) to Ti(3+) and reduction of approximately 20% Ce(4+) to Ce(3+) state compared to 8% Ce(4+) to Ce(3+) in the case of pure CeO(2) below 675 degrees C. The substitution of Ti ions in CeO(2) enhances the reducibility of CeO(2). Ce(0.84)Ti(0.15)Pt(0.01)O(2)(-)(delta) crystallizes in fluorite structure and Pt is ionically substituted with 2+ and 4+ oxidation states. The H/Pt atomic ratio at 30 degrees C over Ce(0.84)Ti(0.15)Pt(0.01)O(2)(-)(delta) is 5 and that over Ce(0.99)Pt(0.01)O(2)(-)(delta) is 4 against just 0.078 for 8 nm Pt metal particles. Carbon monoxide and hydrocarbon oxidation activity are much higher over Ce(1-)(x)(-)(y)Ti(x)Pt(y)O(2) (x = 0.15, y = 0.01, 0.02) compared to Ce(1)(-)(x)Pt(x)O(2) (x = 0.01, 0.02). Synergistic involvement of Pt(2+)/Pt degrees and Ti(4+)/Ti(3+) redox couples in addition to Ce(4+)/Ce(3+) due to the overlap of Pt(5d), Ti(3d), and Ce(4f) bands near E(F) is shown to be responsible for improved redox property and higher catalytic activity.     

Synthesis, structural characterization, reactivity, and thermal stability of [eta(5):sigma-Me2C(C5H4)(C2B10H10)]Ti(R)(NMe2)

Reaction of [eta:(5)sigma-Me2C(C5H4)(C2B10H10)]TiCl(NMe2) (1) with 1 equiv of PhCH2K, MeMgBr, or Me3SiCH2Li gave corresponding organotitanium alkyl complexes [eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti(R)(NMe2) (R = CH2Ph (2), CH2SiMe3 (4), or Me (5)) in good yields. Treatment of 1 with 1 equiv of n-BuLi afforded the decomposition product {[eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti}2(mu-NMe)(mu:sigma-CH2NMe) (3). Complex 5 slowly decomposed to generate a mixed-valence dinuclear species {[eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti}2(mu-NMe2)(mu:sigma-CH2NMe) (6). Complex 1 reacted with 1 equiv of PhNCO or 2,6-Me2C6H3NC to afford the corresponding monoinsertion product [eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti(Cl)[eta(2)-OC(NMe2)NPh] (7) or [eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti(Cl)[eta(2)-C(NMe2)=N(2,6-Me2C6H3)] (8). Reaction of 4 or 5 with 1 equiv of R'NC gave the titanium eta(2)-iminoacyl complexes [eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti(NMe2)[eta(2)-C(R)=N(R')] (R = CH2SiMe3, R' = 2,6-Me2C6H3 (9) or tBu (10); R = Me, R' = 2,6-Me2C6H3 (11) or tBu (12)). The results indicated that the unsaturated molecules inserted into the Ti-N bond only in the absence of the Ti-C(alkyl) bond and that the Ti-C(cage) bond remained intact. All complexes were fully characterized by various spectroscopic techniques and elemental analyses. Molecular structures of 2, 3, 6-8, and 10-12 were further confirmed by single-crystal X-ray analyses.