Halide, amide, cationic, manganese carbonylate, and oxide derivatives of triamidosilylamine uranium complexes

Treatment of the complex [U(Tren(TMS))(Cl)(THF)] [1, Tren(TMS) = N(CH(2)CH(2)NSiMe(3))(3)] with Me(3)SiI at room temperature afforded known crystalline [U(Tren(TMS))(I)(THF)] (2), which is reported as a new polymorph. Sublimation of 2 at 160 °C and 10(-6) mmHg afforded the solvent-free dimer complex [{U(Tren(TMS))(μ-I)}(2)] (3), which crystallizes in two polymorphic forms. During routine preparations of 1, an additional complex identified as [U(Cl)(5)(THF)][Li(THF)(4)] (4) was isolated in very low yield due to the presence of a slight excess of [U(Cl)(4)(THF)(3)] in one batch. Reaction of 1 with one equivalent of lithium dicyclohexylamide or bis(trimethylsilyl)amide gave the corresponding amide complexes [U(Tren(TMS))(NR(2))] (5, R = cyclohexyl; 6, R = trimethylsilyl), which both afforded the cationic, separated ion pair complex [U(Tren(TMS))(THF)(2)][BPh(4)] (7) following treatment of the respective amides with Et(3)NH·BPh(4). The analogous reaction of 5 with Et(3)NH·BAr(f)(4) [Ar(f) = C(6)H(3)-3,5-(CF(3))(2)] afforded, following addition of 1 to give a crystallizable compound, the cationic, separated ion pair complex [{U(Tren(TMS))(THF)}(2)(μ-Cl)][BAr(f)(4)] (8). Reaction of 7 with K[Mn(CO)(5)] or 5 or 6 with [HMn(CO)(5)] in THF afforded [U(Tren(TMS))(THF)(μ-OC)Mn(CO)(4)] (9); when these reactions were repeated in the presence of 1,2-dimethoxyethane (DME), the separated ion pair [U(Tren(TMS))(DME)][Mn(CO)(5)] (10) was isolated instead. Reaction of 5 with [HMn(CO)(5)] in toluene afforded [{U(Tren(TMS))(μ-OC)(2)Mn(CO)(3)}(2)] (11). Similarly, reaction of the cyclometalated complex [U{N(CH(2)CH(2)NSiMe(2)Bu(t))(2)(CH(2)CH(2)NSiMeBu(t)CH(2))}] with [HMn(CO)(5)] gave [{U(Tren(DMSB))(μ-OC)(2)Mn(CO)(3)}(2)] [12, Tren(DMSB) = N(CH(2)CH(2)NSiMe(2)Bu(t))(3)]. Attempts to prepare the manganocene derivative [U(Tren(TMS))MnCp(2)] from 7 and K[MnCp(2)] were unsuccessful and resulted in formation of [{U(Tren(TMS))}(2)(μ-O)] (13) and [MnCp(2)]. Complexes 3-13 have been characterized by X-ray crystallography, (1)H NMR spectroscopy, FTIR spectroscopy, Evans method magnetic moment, and CHN microanalyses.     

Self-assembly of polymer and sheet structures in palladium(II) complexes containing carboxylic acid substituents

A series of complexes trans-[PdCl(2)L(2)] has been prepared by the reaction of [PdCl(2)(PhCN)(2)] and/or Na(2)[PdCl(4)] with L = pyridine or quinoline ligands having one or two carboxylic acid groups. These complexes can form 1-D polymers through O-H.O hydrogen bonding between the carboxylic acid groups, as demonstrated by structure determinations of [PdCl(2)(NC(5)H(4)-4-COOH)(2)], [PdCl(2)(NC(5)H(4)-3-COOH)(2)], and [PdCl(2)(2-Ph-NC(9)H(5)-4-COOH)(2)]. In some cases, solvation breaks down the O-H.O hydrogen-bonded structures, as in the structures of [PdCl(2)(NC(5)H(4)-3-COOH)(2)].2DMSO and [PdCl(2)(2-Ph-NC(9)H(5)-4-COOH)(2)].4DMF, while pyridine-2-carboxylic acid underwent deprotonation to give the chelate complex [Pd(NC(5)H(4)-2-C(O)O)(2)]. The complexes trans-[PdCl(2)L(2)], L = pyridine-3,5-dicarboxylic acid or 2,6-dimethyl pyridine-3,5-dicarboxylic acid, self-assembled to give 2-D sheet structures, with hydrogen bonding between the carboxylic acid groups mediated by solvate methanol or water molecules. In the cationic complexes [PdL'(2)L(2)](2+) (L'(2) = Ph(2)PCH(2)PPh(2), Ph(2)P(CH(2))(3)PPh(2); L = pyridine carboxylic acid; anions X(-) = CF(3)SO(3)(-)), hydrogen bonding between the carboxylic acid groups and anions or solvate acetone molecules occurred, and only in one case was a polymeric complex formed by self-assembly.     

Cobalt N-heterocyclic carbene alkyl and acyl compounds: synthesis, molecular structure and reactivity

The N-heterocyclic-carbene containing cobalt carbonyl compound [Co(IMes)(CO)3(Me)] (IMes = 1,3-bis(2,4,6-trimethylphenyl)-imidazol-2-ylidene), 1, has been synthesised by tertiary phosphine displacement from [Co(PPh3)(CO)3(Me)]. Subsequent carbonylation afforded the acyl derivative [Co(IMes)(CO)3(COMe)], 2. Similarly, the compound [Co(IMes)(CO)3(COEt)], 3, has been synthesised. The compounds 2 and 3 have been shown to react with dihydrogen to form the cobalt hydride compound [Co(IMes)(CO)3(H)], 4. The molecular structures of compounds 1 and 2 have been determined.     

B(C6F5)3 adducts of transition metal acyl compounds

The transition metal acyl compounds [Co(L)(CO)3(COMe)] (L = PMe3, PPhMe2, P(4-Me-C6H4)3, PPh3 and P(4-F-C6H4)3), [Mn(CO)5(COMe)] and [Mo(PPh3)(eta(5)-C5H5)(CO)2(COMe)] react with B(C6F5)3 to form the adducts [Co(L)(CO)3(C{OB(C6F5)3}Me)] (L = PMe3, 1, PPhMe2, 2, P(4-Me-C6H4)3, 3, PPh3, 4, P(4-F-C6H4)3), 5, [Mn(CO)5(C{OB(C6F5)3}Me)] 6 and [Mo(eta(5)-C5H5)(PPh3)(CO)2(C{OB(C6F5)3}Me)], 7. Addition of B(C6F5)3 to a cooled solution of [Mo(eta(5)-C5H5)(CO)3(Me)], under an atmosphere of CO gave [Mo(eta(5)-C5H5)(CO)3(C{OB(C6F5)3}Me)] 8. In the presence of adventitious water, the compound [Co{HOB(C6F5)3}2{OP(4-F-C6H4)3}2] 9, was formed from [Co(P(4-F-C6H4)3)(CO)3(C{OB(C6F5)3}Me)]. The compounds 4 and 9 have been structurally characterised. The use of B(C6F5)3 as a catalyst for the CO-induced migratory-insertion reaction in the transition metal alkyl compounds [Co(PPh3)(CO)3(Me)], [Mn(CO)5(Me)], [Mo(eta(5)-C5H5)(CO)3(Me)] and [Fe(eta(5)-C5H5)(CO)2(Me)] has been investigated.     

Cluster expansion reactions of group 6 and 8 metallaboranes using transition metal carbonyl compounds of groups 7-9

The reinvestigation of an early synthesis of heterometallic cubane-type clusters has led to the isolation of a number of new clusters which have been characterized by spectroscopic and crystallographic techniques. The thermolysis of [(Cp*Mo)(2)B(4)H(4)E(2)] (1: E = S; 2: E = Se; Cp* = η(5)-C(5)Me(5)) in presence of [Fe(2)(CO)(9)] yielded cubane-type clusters [(Cp*Mo)(2)(μ(3)-E)(2)B(2)H(μ-H){Fe(CO)(2)}(2)Fe(CO)(3)], 4 and 5 (4: E = S; 5: E = Se) together with fused clusters [(Cp*Mo)(2)B(4)H(4)E(2)Fe(CO)(2)Fe(CO)(3)] (8: E = S; 9: E = Se). In a similar fashion, reaction of [(Cp*RuCO)(2)B(2)H(6)], 3, with [Fe(2)(CO)(9)] yielded [(Cp*Ru)(2)(μ(3)-CO)(2)B(2)H(μ-H){Fe(CO)(2)}(2)Fe(CO)(3)], 6, and an incomplete cubane cluster [(μ(3)-BH)(3)(Cp*Ru)(2){Fe(CO)(3)}(2)], 7. Clusters 4-6 can be described as heterometallic cubane clusters containing a Fe(CO)(3) moiety exo-bonded to the cubane, while 7 has an incomplete cubane [Ru(2)Fe(2)B(3)] core. The geometry of both compounds 8 and 9 consist of a bicapped octahedron [Mo(2)Fe(2)B(3)E] and a trigonal bipyramidal [Mo(2)B(2)E] core, fused through a common three vertex [Mo(2)B] triangular face. In addition, thermolysis of 3 with [Mn(2)(CO)(10)] permits the isolation of arachno-[(Cp*RuCO)(2)B(3)H(7)], 10. Cluster 10 constitutes a diruthenaborane analogue of 8-sep pentaborane(11) and has a structural isomeric relationship to 1,2-[{Cp*Ru}(2)(CO)(2)B(3)H(7)].     

Preparation and structural characterization of ionic five-coordinate palladium(II) and platinum(II) complexes of the ligand tris[2-(diphenylphosphino)ethyl]phosphine. Insertion of SnCl(2) into M-Cl bonds (M = Pd,Pt) and hydroformylation activity of the Pt-SnCl(3) systems

The five-coordinate palladium(II) and platinum(II) complexes [M(PP(3))Cl]Cl [M = Pd (1), Pt (2)] (PP(3) = tris[2-(diphenylphosphino)ethyl]phosphine) were prepared by interaction of aqueous solutions of MCl(4)(2-) salts with PP(3) in CHCl(3). Complexes 1 and 2 undergo facile chloro substitution reactions with KCN in 1:1 and 1:2 ratios to afford complexes [M(PP(3))(CN)]Cl [M = Pt (3)] and [M(PP(3))(CN)](CN) [M = Pd (4), Pt (5)] possessing M-C bonds, both in solution and in the solid state. The reaction of 1 and 2 with SnCl(2) in CDCl(3) occurs with insertion of SnCl(2) into M-Cl bonds leading to the formation of [M(PP(3))(SnCl(3))](SnCl(3)) [M = Pd (6), M = Pt (7)]. The isolation as solids of complexes 6 and 7 by addition of SnCl(2) to the precursors requires the presence of PPh(3) which activates the cleavage of M-Cl bonds, favors the SnCl(2) insertion, and does not coordinate to M in any observable extent. Solutions of 6 in CDCl(3) undergo tin dichloride elimination in higher proportion than solutions of 7. The reaction of complexes 1 and 2 with SnPh(2)Cl(2) leads to [M(PP(3))Cl](2)[SnPh(2)Cl(4)] [M = Pd (8)]. Complexes 2, 5, 7, and 8 were shown by X-ray diffraction to contain distorted trigonal bipyramidal monocations [M(PP(3))X](+) [M = Pt, X = Cl(-) (2), X = CN(-) (5), X = SnCl(3)(-) (7); M = Pd, X = Cl(-) (8)], the central P atom of PP(3) being trans to X in axial position and the terminal P donors in the equatorial plane of the bipyramids. The "preformed" catalyst 7 showed a relatively high aldehyde selectivity compared to most of the platinum catalysts.     

Polyhedral metallaheteroborane chemistry. Synthesis, spectroscopy, structure and dynamics of eleven-vertex {RhNB(9)} and {PtCB(9)} metallaheteroboranes

Reaction between [RhCl(PPh(3))(3)] and the [nido-6-NB(9)H(11)](-) anion in CH(2)Cl(2) yields orange eleven-vertex [8,8-(PPh(3))(2)-nido-8,7-RhNB(9)H(11)]. Reaction of the [nido-6-CB(9)H(12)](-) anion with [cis-PtCl(2)(PMe(2)Ph)(2)] in methanol affords yellow eleven-vertex [9-(OMe)-8,8-(PMe(2)Ph)(2)-nido-8,7-PtCB(9)H(10)], which is also formed from the reaction of MeOH with [8,8-(PPh(3))(2)-nido-8,7-PtCB(9)H(10)]. Both compounds have been characterised by single-crystal X-ray diffraction analysis and examined by NMR spectroscopy and have structures based on eleven-vertex nido-type geometries, with the metal centre and the heteroatoms in the adjacent (8)- and (7)-positions on the pentagonal open face. The metal-to-heteroborane bonding sphere of is fluxional, with a DeltaG(double dagger) value of 48.4 kJ mol(-1). DFT calculations on the model compounds [8,8-(PH(3))(2)-nido-8,7-RhNB(9)H(11)] and [8,8-(PH(3))(2)-nido-8,7-RhSB(9)H(10)] have been carried out to define the fluxional process and the intermediates involved.     

Preparation and structure of mono- and binuclear half-sandwich iridium, ruthenium, and rhodium carbene complexes containing 1,2-dichalcogenolao 1,2-dicarba-closo-dodecaboranes

The synthesis of half-sandwich transition metal complexes containing both 1,2-dichalcogenolato-1,2-dicarba-closo-docecaborane (Cab(E,E)) [Cab(E,E)=E(2)C(2)(B(10)H(10)); E = S, Se] and N-heterocyclic carbene (NHC) ligands is described. Addition of mono-NHC ligand to the 16e half-sandwich dichalcogenolato carborane complexes [Cp*Rh(Cab(E,E))], [Cp*Ir(Cab(S,S))], [(p-cymene)Ru(Cab(S,S))] (Cp* = pentamethylcyclopentadienyl) gives corresponding mononuclear 18e dithiolate complexes of the type [LM(Cab(E,E))(NHC)]: [Cp*M(Cab(S,S))(1-ethenyl-3-methylimidazolin-2-ylidene)] (M = Ir (2), Rh (3)), [Cp*Rh(Cab(E,E))(3-methyl-1-picolyimidazolin-2-ylidene)] [E = S (6), Se (7)], [(p-cymene)Ru(Cab(S,S))(NHC)] [NHC = 1-ethenyl-3-methylimidazolin-2-ylidene (4), 3-methyl-1-picolyimidazolin-2-ylidene (8)], whereas bis-NHC give centrosymmetric binuclear complexes [{Cp*M(Cab(S,S))}(2)(1,1'-dimethyl-3,3'-methylene(imidazolin-2-ylidene))] [M = Rh (10), Ir (11)]. The complexes were characterized by IR, NMR spectroscopy and elemental analysis. In addition, X-ray structure analyses were performed on complexes 2-4, 6, 8, 10 and 11.     

Solution and solid-state characterization of Eu(II) chelates: a possible route towards redox responsive MRI contrast agents

We report the first solid state X-ray crystal structure for a Eu(II) chelate, [C(NH2)3]3[Eu(II)(DTPA)(H2O)].8H2O, in comparison with those for the corresponding Sr analogue, [C(NH2)3]3[Sr(DTPA)(H2O).8H2O and for [Sr(ODDA)].8H2O (DTPA5 = diethylenetriamine-N,N,N',N",N"-pentaacetate, ODDA2- =1,4,10,13-tetraoxa-7,16-diazacyclooctadecane-7,16-diacetate ). The two DTPA complexes are isostructural due to the similar ionic size and charge of Sr(2+) and Eu(2+). The redox stability of [Eu(II)(ODDA)(H2O)] and [Eu(II)(ODDM)]2- complexes has been investigated by cyclovoltammetry and UV/Vis spectrophotometry (ODDM4- =1,4,10,13-tetraoxa-7,16-diaza-cyclooctadecane-7,16-++ +dimalonate). The macrocyclic complexes are much more stable against oxidation than [Eu(II)(DTPA)(H2O)]3- (the redox potentials are E1/2 =-0.82 V, -0.92 V, and -1.35 V versus Ag/AgCl electrode for [Eu(III/II)(ODDA)(H2O)],[Eu(III/II)(ODDM)], and [Eu(III/II)(DTPA)(H2O)], respectively, compared with -0.63 V for Eu(III/II) aqua). The thermodynamic stability constants of [Eu(II)(ODDA)(H2O)], [Eu(II)(ODDM)]2-, [Sr(ODDA)(H2O)], and [Sr(ODDM)]2- were also determined by pH potentiometry. They are slightly higher for the EuII complexes than those for the corresponding Sr analogues (logK(ML)=9.85, 13.07, 8.66, and 11.34 for [Eu(II)(ODDA)(H2O)], [Eu(II)(ODDM)]2-, [Sr(ODDA)(H2O)], and [Sr(ODDM)]2-, respectively, 0.1M (CH3)4NCl). The increased thermodynamic and redox stability of the Eu(II) complex formed with ODDA as compared with the traditional ligand DTPA can be of importance when biomedical application is concerned. A variable-temperature 17O-NMR and 1H-nuclear magnetic relaxation dispersion (NMRD) study has been performed on [Eu(II)(ODDA)(H2O)] and [Eu(II)(ODDM)]2- in aqueous solution. [Eu(II)(ODDM)]2- has no inner-sphere water molecule which allowed us to use it as an outer-sphere model for [Eu(II)(ODDA)(H2O)]. The water exchange rate (k298(ex)= 0.43 x 10(9)s(-1)) is one third of that obtained for [Eu(II)(DTPA)(H2O)]3-. The variable pressure 17O-NMR study yielded a negative activation volume, deltaV (not=) = -3.9cm3mol(-1); this indicates associatively activated water exchange. This water exchange rate is in the optimal range to attain maximum proton relaxivities, which are, however, strongly limited by the fast rotation of the small molecular weight complex.     

Polynuclear and mixed-ligand mononuclear Cu(I) complexes with N-thiophosphorylated thioureas and 1,10-phenanthroline or PPh3

Deprotonation of the N-thiophosphorylated thioureas RC(S)NHP(S)(OiPr)(2) (R = Me(2)N, HL(I); iPrNH, HL(II); 2,6-Me(2)C(6)H(3)NH, HL(III), 2,4,6-Me(3)C(6)H(2)NH, HL(IV), aza-15-crown-5, HL(V)) and reaction with CuI or Cu(NO(3))(2) in aqueous EtOH leads to the polynuclear complexes [Cu(4)(L(I)-S,S')(4)], [Cu(8)(L(II)-S,S')(8)], and [Cu(3)(L(III-V)-S,S')(3)]. The structures of these compounds were investigated by IR, (1)H, (31)P{(1)H} NMR, UV-vis spectroscopy and elemental analyses. The crystal structures of [Cu(4)L(I)(4)], [Cu(8)L(II)(8)], [Cu(3)L(III,IV)(3)] were determined by single-crystal X-ray diffraction. Reaction of the deprotonated ligands (L(I-V))(-) with a mixture of CuI and 1,10-phenanthroline (phen) or PPh(3) leads to the mixed-ligand mononuclear complexes [Cu(phen)L(I-V)], [Cu(PPh(3))L(I-V)] or [Cu(PPh(3))(2)L(I-V)]. The same mixed-ligand complexes were obtained from the reaction of [Cu(4)L(I)(4)], [Cu(8)L(II)(8)], [Cu(3)L(III-V)(3)] with phen or PPh(3).     

Tris(pyrazolyl)borate carbosilane dendrimers and metallodendrimers

A modified tris(pyrazolylborate) ligand has been prepared in two steps. First, reaction of triisopropylborate with allylmagnesium bromide and further treatment with benzoyl chloride gave CH(2) = CHCH(2)B(O(i)Pr), which was then reacted with potassium pyrazolate and pyrazole to give the compound K[CH(2) = CHCH(2)Bpz(3)]. The new allyl-containing scorpionate anion of acts as a bi- or tri-dentate ligand, as shown by the mononuclear complexes [CH(2) = CHCH(2)Bpz(3)M(LL)] (M = Rh, LL = nbd, ; LL = tfb, ; LL = (CO)(PPh(3)), ; M = Ir, LL = cod, ), obtained from reactions of the chlorido-bridged dinuclear complexes [{M(mu-Cl)(LL)}(2)] with 2. Furthermore, the borate represents a key material to achieve the attachment of tris(pyrazolyl)borate groups to the peripheries of carbosilane dendrimers. Thus, the platinum-catalyzed hydrosilylation reactions of compound with the dendritic cores Si[(CH(2))(3)SiMe(2)H](4) (G(0)-(SiH)(4)), (G(1)-(SiH)(8)), and (G(2)-(SiH)(16)) gave the corresponding borate-containing dendrimers Si[(CH(2))(3)SiMe(2)(CH(2))(3)B(O(i)Pr)(2)](4) (G(0)-B(4)), Si[(CH(2))(3)SiMe{(CH(2))(3)SiMe(2)(CH(2))(3)B(O(i)Pr)(2)}(2)](4) (G(1)-B(8)), and Si[(CH(2))(3)SiMe{(CH(2))(3)SiMe[(CH(2))(3)SiMe(2)(CH(2))(3)B(O(i)Pr)(2)](2)}(2)](4) (G(2)-B(16)) selectively in the anti-Markovnikov direction. Further reactions of G(0)-B(4), G(1)-B(8) and G(2)-B(16) with potassium pyrazolate and pyrazole rendered the corresponding polyanionic dendrimers K(4)[Si{(CH(2))(3)SiMe(2)(CH(2))(3)Bpz(3)}(4)] (G(0)-(Bpz(3))(4)), G(1)-(Bpz(3))(8), and G(2)-(Bpz(3))(16), respectively, which contain 4, 8, and 16 tris(pyrazolyl)borate groups symmetrically located around the dendritic peripheries. These unusual polyanionic dendrimers are excellent scaffolds to support metal centres, as shown by the reactions of G(0)-(Bpz(3))(4), G(1)-(Bpz(3))(8), and G(2)-(Bpz(3))(16) with [{Rh(mu-Cl)(nbd)}(2)] to give the neutral rhodadendrimers [Si{(CH(2))(3)SiMe(2)(CH(2))(3)Bpz(3)Rh(nbd)}(4)] G(0)-(Bpz(3)Rh)(4), G(1)-(Bpz(3)Rh)(8) and G(2)-(Bpz(3)Rh)(16) as stable solids in excellent yields. Following this protocol, mixed rhodium/iridium metallodendrimers can be prepared.     

Supramolecular catalysts by encapsulating palladium complexes within dendrimers

Dendrimers are well-defined and highly branched macromolecules. By utilizing their capsular architectures, dendrimers encapsulating various catalytically active species can be prepared, which often bring about unique catalysis. Treatment of the alkylated PPI dendrimer with 4-diphenylphosphinobenzoic acid and [PdCl(C3H5)]2 afforded the dendrimer-encapsulated Pd complex using ionic interactions. The dendrimers encapsulating Pd complexes acted as unique supramolecular catalysts for the Heck reaction and allylic amination. The specific nanoenvironment created by the dense amino groups inside the dendrimers can provide high catalytic activity and stability for the Pd complexes. Facile recovery of the dendritic catalysts could be achieved by thermomorphic systems.     

Cyanide-melt synthesis of reduced molybdenum selenide clusters

The tightly cross-linked Mo(3n)Se(3n+2) (n = 2, 3,... infinity) cluster compounds react with alkali metal cyanide or cyanide salt mixtures at temperatures of 450-675 degrees C to yield cyanide-terminated molybdenum chalcogenide clusters, [Mo6Se8(CN)6]n- (1n-) (n = 6, 7) and [Mo4Se4(CN)12](8-) (2(8-)). The process by which discrete 1(n-) clusters are excised from a CN-linked intermediate chain compound, K6Mo6Se8(CN)5 (3), was investigated, and the cubane cluster 2(7-) plays an essential role. An efficient one-step synthesis for Na8[2(8-)] is presented. These clusters are stable in basic aqueous solutions. Cyclic voltammetric (CV) measurements in basic aqueous media show multiple reversible redox waves corresponding to 1(6-/7-), 1(7-/8-), and 1(8-/9-) redox couples with half-wave potentials of E(1/2) = -0.442, -0.876, and -1.369 V, respectively, versus SHE. Half-wave potentials (E(1/2)) for the [Mo4Se4)(CN)12](6-/7-) and [Mo4Se4(CN)12](7-/8-) couples are 0.233 and -0.422 V, respectively, versus SHE. The 2(8-) compounds are K7Na[2(8-)].5H2O.MeOH, Cs7Na4[2(8-)]Cl3, Na8[2(8-)], and K4Na4[2(8-)].12H2O. The products were characterized by X-ray crystallography, cyclic voltammetry, and UV-vis spectroscopy. Reduction potentials measured by voltammetry are consistent with conditions needed for isolating reduced species on a preparative scale but are much more negative than previously reported values. Na8[1(8-)].20H(2)O was isolated by reduction of 1(7-) with Zn in aqueous NaCN solution. Reduction potentials measured in basic NaCN solutions of 2(8-) also differ widely from previous reported values.     

Rhodium/iridium-titanium azaheterometallocubanes

Treatment of [[Ti(eta5-C5Me5)(mu-NH)]3(mu3-N)] (1) with the diolefin complexes [[MCl(cod)]2] (M = Rh, Ir; cod = 1,5-cyclooctadiene) in toluene afforded the ionic complexes [M-(cod)(mu3-NH)3Ti3(eta5-C5Me5)3(mu3-N)]Cl [M = Rh (2), Ir (3)]. Reaction of complexes 2 and 3 with [Ag(BPh4)] in dichloromethane leads to anion metathesis and formation of the analogous ionic derivatives [M(cod)(mu3-NH)3Ti3-(eta5-C5Me5)3(mu3-N)][BPh4] [M = Rh (4), Ir (5)]. An X-ray crystal structure determination for 5 reveals a cube-type core [IrTi3N4] for the cationic fragment, in which 1 coordinates in a tripodal fashion to the iridium atom. Reaction of the diolefin complexes [[MCl(cod))2] (M = Rh, Ir) and [[RhCl(C2H4)2]2] with the lithium derivative [[Li(mu3-NH)2(mu3-N)-Ti3(eta5-C5Me5)3(mu3-N)]2] x C7H8 (6 C7H8) in toluene gave the neutral cube-type complexes [M(cod)(mu-NH)2(mu3-N)Ti3-(eta5-C5Me5)3(mu3-N)] [M = Rh (7), Ir (8)] and [Rh(C2H4)2(mu3-NH)2(mu3-N)Ti3(eta5-C5Me5)3(mu3-N)] (9), respectively. Density functional theory calculations have been carried out on the ionic and neutral azaheterometallocubane complexes to understand their electronic structures.     

A series of dinuclear homo- and heterometallic complexes with two or three bridging sulfido ligands derived from the tungsten tris(sulfido) complex [Et(4)N][(Me(2)Tp)WS(3)] (Me(2)Tp = hydridotris(3,5-dimethylpyrazol-1-yl)borate)

The generation of heterobimetallic complexes with two or three bridging sulfido ligands from mononuclear tris(sulfido) complex of tungsten [Et(4)N][(Me(2)Tp)WS(3)] (1; Me(2)Tp = hydridotris(3,5-dimethylpyrazol-1-yl)borate) and organometallic precursors is reported. Treatment of 1 with stoichiometric amounts of metal complexes such as [M(PPh(3))(4)] (M = Pt, Pd), [(PtMe(3))(4)(micro(3)-I)(4)], [M(cod)(PPh(3))(2)][PF(6)] (M = Ir, Rh; cod = 1,5-cyclooctadiene), [Rh(cod)(dppe)][PF(6)] (dppe = Ph(2)PCH(2)CH(2)PPh(2)), [CpIr(MeCN)(3)][PF(6)](2) (Cp = eta(5)-C(5)Me(5)), [CpRu(MeCN)(3)][PF(6)], and [M(CO)(3)(MeCN)(3)] (M = Mo, W) in MeCN or MeCN-THF at room temperature afforded either the doubly bridged complexes [Et(4)N][(Me(2)Tp)W(=S)(micro-S)(2)M(PPh(3))] (M = Pt (3), Pd (4)), [(Me(2)Tp)W(=S)(micro-S)(2)M(cod)] (M = Ir, Rh (7)), [(Me(2)Tp)W(=S)(micro-S)(2)Rh(dppe)], [(Me(2)Tp)W(=S)(micro-S)(2)RuCp] (10), and [Et(4)N][(Me(2)Tp)W(=S)(micro-S)(2)W(CO)(3)] (12) or the triply bridged complexes including [(Me(2)Tp)W(micro-S)(3)PtMe(3)] (5), [(Me(2)Tp)W(micro-S)(3)IrCp][PF(6)] (9), and [Et(4)N][(Me(2)Tp)W(micro-S)(3)Mo(CO)(3)] (11), depending on the nature of the incorporated metal fragment. The X-ray analyses have been undertaken to clarify the detailed structures of 3-5, 7, and 9-12.     

Highly-oxygenated isopimarane-type diterpenes from Orthosiphon stamineus of Indonesia and their nitric oxide inhibitory activity

From the methanolic extract of Indonesian Orthosiphon stamineus, nine new highly-oxygenated isopimarane-type diterpenes [7-O-deacetylorthosiphol B (1), 6-hydroxyorthosiphol B (2), 3-O-deacetylorthosiphol I (3), 2-O-deacetylorthosiphol J (4), siphonols A-E (5-9)] have been isolated together with nine known diterpenes [orthosiphols H (10), K (11), M (12) and N (13); staminols A (14) and B (15); neoorthosiphols A (16) and B (17); norstaminol A (18)]. Their structures were determined based on the spectroscopic data. The isolated diterpenes inhibited nitric oxide (NO) production in lipopolysaccharide (LPS)-activated macrophage-like J774.1 cells. Compounds 4-7, 9, 10, 14, and 17 showed inhibitory activities more potent (IC(50), 10.8-25.5 microM) than a positive control N(G)-monomethyl-L-arginine (L-NMMA; IC(50), 26.0 microM).     

Transition Metal Complexes of Cyanoisocyanoarenes as Building Blocks for One-, Two-, and Three-Dimensional Molecular Solids

The complexes trans-[MI(2)(CNC(6)H(4)-CN-4)(2)], (M = Pd and Pt), trans-[FeI(2)L(4)] (L = CNC(6)H(4)-CN-4 and CNC(6)H(2)-Me(2)-2,6-CN-4), and [Mn(CNC(6)H(4)-CN-4)(6)][SO(3)CF(3)] were prepared. The compounds are thermally stable up to 230 degrees C or higher. The molecular structure of trans-[FeI(2)(CNC(6)H(4)-CN-4)(4)] was determined by X-ray crystallography: monoclinic, space group P2(1)/n, a = 11.570(2) ?, b = 10.1052(8) ?, c = 28.138(7) ?, beta = 92.034(9) degrees, Z = 4, 3464 unique reflections, R = 0.074, R(w) = 0.089. The complexes contain the peripheral cyano groups in linear, planar, and octahedral dispositions, respectively. Solids were obtained by combining solutions of [PdI(2)(CNC(6)H(4)-CN-4)(2)] and [Cu(hfacac)(2)], [FeI(2)(CNC(6)H(4)-CN-4)(4)] and AgSO(3)CF(3), [FeI(2)(CNC(6)H(2)-Me(2)-2,6-CN-4)(4)] and [Rh(2)(O(2)CCF(3))(4)], and [Mn(CNC(6)H(4)-CN-4)(6)][SO(3)CF(3)] and [Rh(2)(O(2)CCF(3))(4)]. [PdI(2)(CNC(6)H(4)-CN-4)(2)] and [Cu(hfacac)(2)] in a ratio of 1:2 form a crystalline, one-dimensional solid: monoclinic, space group P2(1)/c, a = 8.317(2) ?, b = 13.541(1) ?, c = 22.568(5) ?, beta = 100.45(1) degrees, Z = 2, 3279 unique reflections, R = 0.037, R(w) = 0.047.     

Ruthenium complexes with tetraphenylimidodiphosphinate: syntheses, structures, and applications to catalytic organic oxidation

Treatment of Ru(PPh3)3Cl2 with K(tpip) (tpip(-)=[N(Ph2PO)2](-)) afforded Ru(tpip)(PPh3)2Cl (1), which reacted with 4- t-Bu-C6H4CN, SO2(g), and NH 3(g) to give Ru(tpip)(PPh3)2Cl(4- t-BuC6H4CN) (2), Ru(tpip)(PPh3)2Cl(SO2) (3), and fac-[Ru(NH3)3(PPh3)2Cl][tpip] (4), respectively. Reaction of [Ru(CO)2Cl2] x with K(tpip) in refluxing tetrahydrofuran (THF) led to isolation of the K/Ru bimetallic compound K 2Ru2(tpip)4(CO)4Cl2 (5). Photolysis of cis-Ru(tpip) 2(NO)Cl in MeCN and wet CH 2Cl 2 afforded cis-Ru(tpip) 2(MeCN)Cl ( 6) and cis-Ru(tpip)2(H2O)Cl (7), respectively. Refluxing 6 in neat THF yielded Ru(tpip) 2(THF)Cl (8). Treatment of Ru(CHR)Cl2(PCy3)2 (Cy=cyclohexyl) with [Ag(tpip)] 4 afforded cis-Ru(tpip)2(CHR)(PCy3) [R=Ph (9), OEt (10)]. Complex 9 is capable of catalyzing oxidation of alcohols and olefins with N-methylmorpholine N-oxide and iodosylbenzene, respectively. The crystal structures of 2-7 and 9 were determined.     

Synthesis,characterization, and solution redox properties of (trimpsi)M(CO)(2)(NO) complexes [M = V,Nb, Ta; trimpsi = (t)BuSi(CH(2)PMe(2))(3)

Treatment of [Et(4)N][M(CO)(6)] (M = Nb, Ta) with I(2) in DME at -78 degrees C produces solutions of the bimetallic anions [M(2micro-I)(3)(CO)(8)](-). Addition of the tripodal phosphine (t)BuSi(CH(2)PMe(2))(3) (trimpsi) followed by refluxing affords (trimpsi)M(CO)(3)I [M = Nb (1), Ta (2)], which are isolable in good yields as air-stable, orange-red microcrystalline solids. Reduction of these complexes with 2 equiv of Na/Hg, followed by treatment with Diazald in THF, results in the formation of (trimpsi)M(CO)(2)(NO) [M = Nb (3), Ta (4)] in high isolated yields. The congeneric vanadium complex, (trimpsi)V(CO)(2)(NO) (5), can be prepared by reacting [Et(4)N][V(CO)(6)] with [NO][BF(4)] in CH(2)Cl(2) to form V(CO)(5)(NO). These solutions are treated with 1 equiv of trimpsi to obtain (eta(2)-trimpsi)V(CO)(3)(NO). Refluxing orange THF solutions of this material affords 5 in moderate yields. Reaction of (trimpsi)VCl(3)(THF) (6) with 4 equiv of sodium naphthalenide in THF in the presence of excess CO provides [Et(4)N][(trimpsi)V(CO)(3)] (7), (trimpsi)V(CO)(3)H, and [(trimpsi)V(micro-Cl)(3)V(trimpsi)][(eta(2)-trimpsi)V(CO)(4)].3THF ([8][9].3THF). All new complexes have been characterized by conventional spectroscopic methods, and the solid-state molecular structures of 2.(1)/(2)THF, 3-5, and [8][9].3THF have been established by X-ray diffraction analyses. The solution redox properties of 3-5 have also been investigated by cyclic voltammetry. Cyclic voltammograms of 3 and 4 both exhibit an irreversible oxidation feature in CH(2)Cl(2) (E(p,a) = -0.71 V at 0.5 V/s for 3, while E(p,a) = -0.55 V at 0.5 V/s for 4), while cyclic voltammograms of 5 in CH(2)Cl(2) show a reversible oxidation feature (E(1/2) = -0.74 V) followed by an irreversible feature (0.61 V at 0.5 V/s). The reversible feature corresponds to the formation of the 17e cation [(trimpsi)V(CO)(2)(NO)](+) ([5](+)()), and the irreversible feature likely involves the oxidation of [5](+)() to an unstable 16e dication. Treatment of 5 with [Cp(2)Fe][BF(4)] in CH(2)Cl(2) generates [5][BF(4)], which slowly decomposes once formed. Nevertheless, [5][BF(4)] has been characterized by IR and ESR spectroscopies.