Anionic polymerization of 1,2-butylene oxide

Anionic polymerizations of 1,2-butylene oxide were carried out in vacuum-sealed dilatometers in the range of 30–60°C. Potassium terbutoxide and dimsyl sodium were used as initiators; dimethyl sulfoxide (DMSO) and mixtures of DMSO with tetrahydrofuran were solvents. The polymer products were analyzed by gel permeation chromatography and infrared spectroscopy. The object of the investigation was to obtain information on the mechanism of the reaction and to elucidate some of its kinetic aspects. It has been shown that the polymerizations occur by two different processes, depending on the choice of experimental conditions. One of the processes involves free ions and ion-pairs, the other, ion-pairs alone. In the first case, where dimethyl sulfoxide is used as solvent, the order of the reaction with respect to the initiator concentration far exceeds unity (～1.8), while in the second case, involving mixed solvents, the order of the reaction, for all practical purposes, is one.     

Kinetics and mechanism of the oxidation of aliphatic alcohols by quinolinium fluorochromate

The oxidation of some aliphatic alcohols by quinolinium fluorochromate (QFC) in dimethyl sulfoxide leads to the formation of corresponding carbonyl compounds. The reaction is first order with respect to QFC. The reaction exhibited Michaelis‐Menten type kinetics with respect to the alcohol. The reaction is catalyzed by hydrogen ions. The hydrogen‐ion dependence has the form: k_obs=a + b[H⁺]. The oxidation of [1,1‐²H₂]ethanol (MeCD₂OH) exhibits a substantial primary kinetic isotope effect. The reaction has been studied in nineteen different organic solvents. The solvent effect was analyzed using Taft's and Swain's multiparametric equations. The rate of disproportionation of the complex is susceptible to both polar and steric effects of the substituents. A suitable mechanism has been proposed. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 469–475, 1999     

Kinetics and mechanism of the oxidation of diols by pyridinium bromochromate

The kinetics of oxidation of four vicinal diols, four nonvicinal diols, and one of their monoethers by pyridinium bromochromate (PBC) have been studied in dimethyl sulfoxide. The main product of oxidation is the corresponding hydroxyaldehyde. The reaction is first-order with respect to each the diol and PBC. The reaction is acid-catalyzed and the acid dependence has the form: k_obs=a+b[H⁺]. The oxidation of [1,1,2,2-²H₄]ethanediol exhibited a primary kinetic isotope effect (k_H/k _D=6.70 at 298 K). The reaction has been studied in 19 organic solvents including dimethyl sulfoxide and the solvent effect has been analyzed using multiparametric equations. The temperature dependence of the kinetic isotope effect indicates the presence of a symmetrical transition state in the rate-determining step. A suitable mechanism has been proposed. © 1998 John Wiley & Sons, Inc. Int J Chem Kinet 30: 285–290, 1998.     

The Reaction of Ethyl Bromoacetate with Dimethyl Sulfoxide

The reaction of excess dimethyl sulfoxide with ethyl bromoacetate has been shown to produce ethyl glyoxylate, hydrogen bromide, and dimethyl sulfide. The yield of glyoxylate at first was reduced because the dimethyl sulfide reacted with bromoacetate to form trimethylsulfonium bromide and ethyl (methylmercapto) acetate, presumably via carbethoxymethyldimethylsulfonium bromide. These side reactions were diminished in a thin-film reactor, but the result was not satisfiable, the yield was 51%, and the side reactions were prevented by addition of methyl bromide, which rapidly consumed the dimethyl sulfide with formation of trimethylsulfonium bromide. Addition of 1, 2-epoxy-3-phenoxypropane removed the hydrogen bromide, thereby preventing the deleterious effects casued by its reduction of dimethyl sulfoxide to dimethyl sulfide. In this way has been developed a convenient preparation of ethyl glyoxylate in yields averaging about 70%. Identification and stoichiometry of the reaction products are presented.     

Kinetics and Mechanism of Ruthenium(III) Catalyzed Oxidation of Dimethyl Sulfoxide by N-Chlorosuccinimde in Aqueous Alkaline Medium

The ruthenium(III) catalyzed oxidation of dimethyl sulfoxide by N-chlorosuccinimide (NCS) in aqueous alkaline medium is found to occur via substrate-catalyst complex formation followed by the interaction of active species of NCS viz., HOCl and the complex in a slow step to yield the products with regeneration of the catalyst. One of the products, succinimide, retards the rate of reaction. The reaction is first order in [NCS] and [Ru(III)], lower than first order in [DMSO] and of inverse fractional order in [OH^-]. A suitable mechanism is proposed and the reaction constants of individual steps involved in the mechanism have been evaluated. This revised version was published online in June 2006 with corrections to the Cover Date.     

Lewis acid-promoted cascade reaction for the synthesis of Michael acceptors and its application in a dimerization reaction

An efficient Lewis acid-promoted cascade reaction with dimethyl sulfoxide as a methylene source for the synthesis of Michael acceptors is reported. The key to developing this procedure is the selection of a mild base to modulate the equilibrium of various intermediates in order to drive the reaction forward to the formation of Michael acceptor and dimeric compound products. Extensive studies were performed to gain insight into a possible reaction mechanism.     

Reaction kinetics of the reaction between carbon dioxide and glycidyl methacrylate using tetraoctylammonium chloride as catalyst

Carbon dioxide was absorbed in an organic solutions of glycidyl methacrylate (GMA) in a semi-batch stirred tank with a plane gas-liquid interface at 101.3 kPa to obtain the absorption rate of carbon dioxide, from which the reaction kinetics of the reaction between carbon dioxide and GMA as studied using tetraoctylammonium chloride as catalyst. The reaction rate constants were estimated from the mass transfer mechanism accompanied by the pseudo-first-order reaction with respect to the concentration of carbon dioxide. An empirical correlation formula between the reaction rate constants and the solubility parameters of solvents such as toluene, N-methyl-2-pyrrolidinone, and dimethyl sulfoxide is presented.     

Understanding the template preorganization step of an artificial arginine receptor

A biomimetic complex which mimics the arginine-phosphonate diester interaction of the arginine fork is investigated with respect to structure and energetics of stable configurations. Within this work, we provide knowledge on local minima of the isolated system obtained from first-principles calculations. Non-negligible solvation effects are studied in a microsolvation approach. The interactions which govern the structural patterns of molecular recognition in this tweezer-guest complex can be significantly modulated by the action of hydrogen bond accepting and donating solvent molecules, such as dimethyl sulfoxide or water, which were present in experimental investigations on this system. Different tweezer-guest structures are evaluated with respect to their temperature-dependent thermodynamical properties as products of the first association reaction step of the bisphosphonate tweezer template and the guanidinium moiety.     

Elimination of oxidative degradation during the per-O-methylation of carbohydrates

The possible oxidative degradation mechanism occurring during the per-O-methylation of carbohydrates in dimethyl sulfoxide with methyl iodide in the presence of base is described. Evidence is presented that this process occurs only under anhydrous conditions when there is a long reaction time between the carbohydrate dissolved in dimethyl sulfoxide and methyl iodide, followed by reaction with the base. Under these specific conditions, the oxidative degradation of alditols, and cyclic carbohydrates, with and without a free hemiacetal group, is observed. The reaction between carbohydrate and methyl iodide in dimethyl sulfoxide can result in a complete oxidative degradation depending on the type of carbohydrate and the time of reaction. The oxidative degradation can be accelerated by replacing methyl iodide with dimethyl sulfate. Mass spectrometric identification of the degradation products of d-glucitol indicates simultaneous oxidation processes at all the hydroxyl groups, with site dependent rates of their reactivity. This oxidative process is not a characteristic of the methylation of carbohydrates in dimethyl sulfoxide with methyl iodide in the presence of solid sodium hydroxide and can be totally avoided by treating the carbohydrate with powdered sodium hydroxide before introduction of methyl iodide under nonanhydrous conditions, or by adding a trace of water in dimethyl sulfoxide before methyl iodide, or by using N,N-dimethylacetamide as the solvent. The degradation of the per-O-methylated carbohydrates in the liquid-liquid extraction process is also taken into account, and it is found that the degradation process can be avoid by neutralization of the base before extraction, by using benzene or tetrachloromethane as extraction solvent, and by drying the final organic extract.     

Synthesis and characterization of ruthenium(ii) complexes of 5-hydroxyflavones

Bis(dimethyl sulfoxide)bis(flavonato)ruthenium(II) complexes, RuL₂(DMSO)₂, were synthesized by the reaction of dichlorotetrakis(dimethyl sulfoxide)ruthenium(II) with the sodium salts of 5-hydroxyflavone, 5-hydroxy-4′-methoxyflavone and 5-hydroxy-3′,4′,5′,7-tetramethoxyflavone, ( L ). The complexation was followed by ¹H nmr spectroscopy. The 1:1 kinetically favoured tris(dimethyl sulfoxide)chloroflavonatoruthenium(II) complexes, RuLCl(DMSO)₃, were initially formed and then transformed into the thermodynamically more stable ones. Each one of these complexes, by reacting with another equivalent of lig-and L, also gave rise to a mixture of 1:2 kinetic species, from which the 1:2 thermodynamically more stable bis(dimethyl sulfoxide)bis(flavonato)ruthenium(II) complexes, RuL₂(DMSO)₂, were formed. The complexes were characterized by extensive studies involving ¹H, ¹³C nuclear magnetic resonance, infrared and ultraviolet-visible spectroscopy, mass spectrometry, cyclic voltammetry and elemental analysis. Such 1:2 complexes exhibited properties of two nonequivalent flavonate ligands and also of two non-equivalent dimethyl sulfoxide ligands; one of these dimethyl sulfoxide ligands is considered to be S-bonded and the other O-bonded. Also two quasireversible one-electron redox steps were observed at 0.53 to 0.57 and 0.44 to 0.41 V (vs Saturated Calomel Electrode). The spectroscopic results obtained allow for the discussion of stereochemistry of each bis(dimethyl sulfoxide)bis(flavonato)ruthenium(II) complex and to postulate its possible structure as one corresponding to the more anisochronous species.     

Kinetics and mechanism of oxidation of dimethyl sulfide with molecular oxygen catalysed by K[RuIII(EDTA-H)Cl] complex in water-dioxan medium

Oxidation of dimethyl sulfide (Me₂S) with molecular oxygen catalysed by [Ru^III(EDTA)(H₂O)]⁻1a (EDTA = ethylenediaminetetraacetate anion) was studied spectrophotometrically in water-dioxan medium at constant pH 5.0 (acetic acid-acetate buffer) and ionic strength 0.2 M (KCl). The reaction proceeds through the formation of a [Ru^III(EDTA)(Me₂S)]⁻2 intermediate which undergoes oxidation with molecular oxygen to give dimethyl sulfoxide (Me₂SO) as the oxidation product. The rate of formation of 2 and its decomposition was followed spectrophotometrically by monitoring the reactions at 528 nm the characteristic peak of 2. The rate of formation of 2 was found to be first order in the concentrations of 1a and Me₂S. The rate of decomposition of 2 is independent of the concentration of Me₂S and is half-order with respect to oxygen concentration. Both the formation and decomposition reactions of 2 were studied at different temperatures, and the activation parameters ΔH≠ and ΔS≠ were determined. A suitable mechanism was proposed for the catalytic oxidation of dimethyl sulfide to dimethyl sulfoxide with molecular oxygen.     

Natural phenolic compounds in the reaction with a nitrogen-centered radical in an aprotic solvent

Kinetics and mechanism of the reaction of vegetable phenols (PhOH) with 2,2′-diphenyl-1-picrylhydrazyl radical (DPPH?) in a polar aprotic solvent, dimethyl sulfoxide, were studied. The reaction of natural phenols with DPPH? in dimethyl sulfoxide occurs in two stages. In the first stage, a proton-coupled electron transfer (PCET) occurs from a PhOH molecule to DPPH? to give primary transformation products, phenoxyl radicals (PhO?) and diphenyl hydrazine (DPPH–H), and in the second, the hydrazyl radical is consumed in the reaction with PhO? transformation products, enolized dimers, which is confirmed by NMR spectroscopy. A relationship was revealed between the antiradical activity of phenols in the reaction with DPPH? (ln k) and the ionization potential of the phenolates being formed.     

Dimethyl sulfoxide/oxalyl chloride: A useful reagent for sulfenyletherification

A facile method for the sulfenyletherification of unsaturated alcohols using dimethyl sulfoxide/oxalyl chloride has been described in this article. Methanesulfenyl chloride is supposed to be the compound responsible for the sulfenyletherification, which is generated by the reaction of oxalyl chloride with 2 equivalents of dimethyl sulfoxide. The formation pathway of methanesulfenyl chloride is discussed based on the formation of cyclic acetals.     

Oxidation of aliphatic alcohols by triethylammonium chlorochromate in non-aqueous medium – A kinetic and mechanistic study

The oxidation of some aliphatic alcohols by triethylammonium chlorochromate (TriEACC) in dimethyl sulfoxide leads to the formation of the corresponding carbonyl compounds. The reaction is first order with respect to TriEACC. The reaction exhibited Michaelis–Menten type kinetics with respect to alcohol. The reaction is catalyzed by hydrogen ions. The hydrogen-ion dependence has the form: k_obs = a + b[H⁺]. The oxidation of [1,1-²H₂] ethanol (MeCD₂OH) exhibits a substantial primary kinetic isotope effect. Oxidation of aliphatic alcohol was studied in 19 different organic solvents. The solvent effect has been analysed using Kamlet’s and Swain’s multi-parametric equation. A suitable mechanism has been proposed.     

Cyclocopolymerization of bicyclopentene and other dicyclic dienes with sulfur dioxide to fused ring systems

The synthesis and cyclocopolymerization with sulfur dioxide of four 1,5- and 1,6-dienes (bicyclopentene, bicyclohexene, dicyclopentenyl ether, and dicyclohexenyl ether) and one tetraene (quartercyclopentene) is described. Under optimum conditions, completely soluble copolymers are obtained from bicyclopentene in high conversions at temperatures down to ?39°C. Bicyclohexene also gave soluble copolymers, but in a by far slower reaction and in low conversion. Quartercyclopentene does copolymerize, but as expected, gives only insoluble polymers. The two compounds with 1,6-diallyl ether structure, dicyclopentenyl ether and dicyclohexenyl ether, failed to polymerize. The influence of initiator, temperature, reaction medium, diene concentration, etc., on the properties of the polymers was studied in detail for copolymerizations of bicyclopentene. Only a very limited number of peroxides in unusual large quantities was found to be effective in initiating this copolymerization. The reaction is further limited to a narrow choice of solvents, e.g,. diethyl ether and tetrahydrofuran, in order to obtain soluble products. Polymerization could not be achieved in ethanol, benzene, methylene chloride, dimethyl sulfoxide, and tetramethylene sulfone; excess sulfur dioxide yields only dark and insoluble products. Diene concentrations of below 0.3 wt.-% are normally required to obtain poly(bicyclopentene sulfones) which are soluble in dimethyl sulfoxide, tetramethylene sulfone, or sulfuric acid. Polymerization can be carried out from room temperatures down to ?39°C.; optimum results are generally obtained around 0°C. Inherent viscosities of 1.72 (0.5 g./100 ml. dimethyl sulfoxide) have been measured. X-ray diffractions are those of amorphous polymers.     

Kinetics and Mechanism of Oxidation of Dimethyl Sulfoxide with Benzoyl Peroxide in Superbasic Media

Oxidation of dimethyl sulfoxide with benzoyl peroxide in some dipolar aprotic solvents and superbasic media was studied. The kinetic parameters were correlated with the main physicochemical characteristics of solvents. The oxidation rate grows with increasing donor number and polarizability of the solvent. A two-step scheme of dimethyl sulfoxide oxidation with benzoyl peroxide in superbasic media was suggested, involving preliminary cleavage of the peroxide to perbenzoate with the base. In the reaction, sodium tert-butylate is preferable over sodium hydroxide.     

The diels-alder reaction of 5-aminopyrazole-4-carbonitrile with dmad: Synthesis and structural determination of dimethyl 2-(p-toluenesulfonylamino)-3-cyano-4-imino-1,4-dihydropyridine-5,6-dicarboxylate

The Diels-Alder reaction of 5-amino-1-(p-toluenesulfonyl)pyrazole-4-carbonitrile with dimethyl acetylenedi-carboxylate was carried out in the presence of potassium carbonate in dimethyl sulfoxide. The reaction gave dimethyl 2-(p-toluenesulfonylamino)-3-cyano-4-imino-1,4-dihydropyridine-5,6-dicarboxylate. The product was formed by transformation of the original Diels-Alder adduct followed by rearrangement of the p-toluenesul-fonylamino group into the 2-position of the pyridine ring. The structure of the product was irrefutably established by X-ray crystallography. This reaction is the first example of a pyrazole ring serving as the diene in a [4 + 2] cycloaddition reaction.     

A concise and efficient way to synthesize polyenic diones directly from α,β-unsaturated methyl ketones

A concise and efficient approach to polyenic compounds containing important diketone structural fragments is developed from readily available α,β-unsaturated methyl ketones in the presence of copper(II) oxide, iodine, and dimethyl sulfoxide. This is a new carbon-carbon double bond-forming reaction from two methyl sp³ C-H bonds and an attractive route to introduce the SMe group into the molecule from inexpensive dimethyl sulfoxide. The hypothetic self-sorting tandem reaction mechanism is also proposed in this paper.     

Oxidations by iron(VI). Kinetic study of uncatalysed and osmium(VIII) catalysed oxidation of dimethyl sulphoxide in alkaline medium

Summary Uncatalysed and Os^VIII-catalysed oxidation of dimethyl sulphoxide (DMSO) by potassium ferrate [Fe^VI] has been studied in alkaline medium in the 9.8–11.9 pH range, in the presence of IO ₄ ^– as a stabilizing agent. The order in [Fe^VI] and [DMSO] was found to be unity for the uncatalysed reaction and zero and fractional respectively for the catalysed reaction. The [Os^VIII] order was unity in the catalysed reaction. The rate of oxidation decreased with increase in pH and the order in [H⁺] was fractional for the uncatalysed oxidation. However in the catalysed oxidation, the rate at first decreased and then increased with increase in pH. The effect of changing [IO ₄ ^– ] and [buffer] on the oxidation rate was negligible in both cases. Suitable mechanisms consistent with the observed kinetics have been proposed.