The Stabilities and Thermodynamic Properties of Thorium(IV) and Zirconium(IV) Chelates of Ethylenebis (Oxyethylenenitrilo) Tetraacetic Acid

The interaction between ethylenebis(oxyethylenenitrilo)tetraacetic acid (EGTA or H₄Z) and Th(IV) and Zr(IV) ions has been investigated potentiometrically by using a mercury indicator electrode. The formation constants of the chelates ThZ and ZrZ have been evaluated at a constant ionic strength of 0.10 (KNO₃) and at 0, 10, 20, 30 and 40°. Enthalpy and entropy changes characterizing the formation of the chelates have been calculated by the least-squares method at 25°. The results are collected as follows:      

Backbonding in Thorium(IV) and Uranium(IV) Diarsenido Complexes with tBuNC and CO

The coordination of tBuNC and CO with the diarsenido complexes (C₅Me₅)₂An(η²-As₂Mes₂), An=Th, U, has been investigated. For the first time, a comparison between isostructural complexes of Th^IV and U^IV has been possible with CO; density functional calculations indicated an appreciable amount of π backbonding that originates from charge transfer from an actinide-arsenic sigma bond. The calculated CO stretching frequencies in the Th^IV and U^IV diarsenido complexes are consistent with the experimental measurements, both show large shifts to lower frequency. We demonstrate that the π backbonding is crucial to explaining the red shifts of CO frequency upon An^IV complex formation. Interestingly, this interaction essentially correlates to the parallel orientation of π*(C−O) orbitals relative to the An−As bond.     

Spectrophotometric Studies of Cerium(III) and Thorium(IV) Chelates of Diethylenetriaminepentaacetic Acid (DTPA)

The interaction between diethylenetriaminepentaacetic acid (DTPA or H_sZ) and Ce(III) and Th(IV) ions has been investigated spectrophotometrically in aqueous solution at an ionic strength of 0.1 and for various temperatures. It has been found that the Ce(III)-DTPA chelate (1:1) exhibited a characteristic absorption maximum at 297 nm, and the optimum pH range is between 3.4 to 4.4. The absorption of Ce(III)-DTPA chelate is considerably diminished by adding small amounts of Th(IV) ions. This phenomenon was used to evaluate the formation constant of Th(IV)-DTPA chelate (1:1). The formation constants and the thermodynamic properties characterizing the formation of the chelates have been calculated at 25°. The results are as follows:      

Thermodynamic Modeling of Actinide Complexation with Acetate and Lactate at High Ionic Strength

The stability constants of NpO ₂ ⁺ , UO ₂ ²⁺ Am³⁺, and Th⁴⁺ with acetate and lactate anions has been measured in 0.3–5.0m NaCl media at 25°C by the solvent extraction technique. For the 1:1 complexation, the values of the stability constants increased in the order: NpO ₂ ⁺ < Am³⁺ < ₂ ²⁺ < Th⁴⁺, in accordance with the actinide charge density and reflecting the strongly ionic bonding of the complexes. The Pitzer ionic interaction parameters were calculated and used to estimate the thermodynamic stability constants at I = 0. Because our data were collected mainly in the high ionic strength region values of ⁽¹⁾ were estimated from values reported in the literature. For all stability constants the Pitzer model gives an excellent representation of the data using three interaction parameters ⁽⁰⁾, ⁽¹⁾, and COn leave from Institute of     

Adsorptive Removal of Thorium(IV) from Aqueous Solutions Using Synthesized Polyamidoxime Chelating Resin: Equilibrium,Kinetic, and Thermodynamic Studies

In this study, an amidoximated chelating ion exchange resin was prepared by poly-acrylonitrile (PAN) grafted potato starch. The adsorbent characterizations such as specific surface area, pore volume, average pore radius, and Fourier transform infrared (FTIR) spectrum of the resin were measured. The effects of pH, adsorbent dosage, contact time, initial concentration of thorium ion, and temperature on adsorption of thorium ion from aqueous solutions were investigated. Four isotherm models including Langmuir, Freundlich, Dubinin-Radushkevich, and Temkin were applied to analyze the equilibrium isotherm data. The results showed that Langmuir and Temkin models had a good agreement with experimental data. The maximum capacity of the adsorbent using the Langmuir isotherm model was 227.27 mg · g^?1. The kinetic models like pseudo-first-order, pseudo-second-order, Elovich, and intraparticle were examined to describe the adsorption process. The kinetics of the adsorption process was found to follow the pseudo-second-order kinetic model. The thermodynamic parameters (ΔG°, ΔH°, ΔS°) were also calculated using equilibrium constant values at various temperatures (25, 35, 45, 55°C) and the positive value for ΔH° showed an endothermic adsorption process. The study suggests that the prepared adsorbent has promising potential for the removal of thorium from wastewaters.      

Extraction kinetics of Uranium(VI) and Thorium(IV) with Tri-iso-amyl phosphate from nitric acid using a Lewis Cell

The extraction kinetics of uranium(VI) and thorium(IV) with Tri-iso-amyl phosphate (TiAP) from nitric acid medium has been investigated using a Lewis Cell. Especially, dependences of the extraction rate on stirring speed, temperature, interfacial area were firstly measured to elucidate the extraction kinetics regimes. The experimental results demonstrated that extraction kinetic of U(VI) is governed by chemical reactions at interface with an activation energy, E_a, of 43.41 kJ/mol, while the rate of Th(IV) extraction is proved to be intermediate controlled, of which the E_a is 23.20 kJ/mol. Reaction orders with respect to the influencing parameters of the extraction rate are determined, and the rate equations of U(VI) and Th(IV) at 293 K have been proposed as $$ {\text{r}} = - {\text{dcUO}}_{ 2} \left( {{\text{NO}}_{ 3} } \right)_{ 2} /{\text{dt}} = 1. 80 \times 10^{ - 3} \left[ {{\text{UO}}_{ 2} \left( {{\text{NO}}_{ 3} } \right)_{ 2} } \right]^{ 1.0 1} \left[ {\text{TiAP}} \right]^{0. 5 5} , $$ $$ {\text{r}} = - {\text{dcTh }}\left( {{\text{NO}}_{ 3} } \right)_{ 4} /{\text{dt}} = 1. 8 8\times 10^{ - 3} \left[ {{\text{Th }}\left( {{\text{NO}}_{ 3} } \right)_{ 4} } \right]^{ 1.0 4} \left[ {\text{TiAP}} \right]^{ 1. 7 7} \left[ {{\text{HNO}}_{ 3} } \right]^{0. 3 8} , $$ respectively.     

Uranium(VI) and Thorium(IV) Adsorption Studies on Chelating Resin Containing Pentaethylenehexamine as a Functional Group

A new chelating resin (glycidyl methacrylate/divinylbenzene/pentaethylenehexamine (GMA/DVB/PEHA)) for uranium(VI) and thorium(IV) has been developed by functionalizing GMA/DVB with PEHA. The adsorption of U(VI) and Th(IV) ions onto the functionalized GMA/DVB/PEHA were investigated as a function of pH value, contact time, and temperature using batch adsorption technique. The results showed that U(VI) and Th(IV) adsorption onto GMA/DVB/PEHA was strongly dependent on pH. Kinetic studies revealed that the adsorption process achieved equilibrium within 15 and 90 minutes for Th(IV) and U(VI), respectively, and followed a pseudo-second-order rate equation. The isothermal data correlated with the Langmuir model better than the Freundlich model. Thermodynamic data indicated the spontaneous and endothermic nature of the process. The maximum adsorption capacity of U(VI) and Th(IV) were found to be 114 and 78 mg/g, respectively. Quantitative recovery of uranium and thorium were achieved by desorbing the loaded GMA/DVB/PEHA with 0.5 M HNO₃      

Evaluation of Vanadium(IV) as a Non-radioactive Surrogate for Technetium(IV) by Comparison of Stability Constants for Polyamino Polycarboxylate Ligand Complexation

The stability constants for the Tc(IV) and V(IV) complexation with the polyamino polycarboxylate ligands IDA, NTA, HEDTA and DTPA were determined using liquid–liquid extraction techniques. These stability constants were then used to evaluate the validity of using V(IV) as a chemical analogue for Tc(IV). Results suggest that Tc(IV), as TcOOH⁺, will form β _1?11 complexes with the selected ligands, while V(IV), as VO²⁺, will form β ₁₀₁ complexes. The values for these determined stability constants are (in log₁₀ unit) 10.9 ± 0.1, 11.4 ± 0.1, 14.9 ± 0.1, and 20.1 ± 0.1 for Tc(IV) in 0.5 mol·L^?1 NaCl at 25 °C, for IDA, NTA, HEDTA and DTPA, respectively, they are 9.3 ± 0.1, 11.6 ± 0.2, 15.8 ± 0.1, and 20.8 ± 0.1 for V(IV) in 0.5 mol·L^?1 NaCl at 25 °C, for the same suite of ligands. The incorporation of a hydroxide into the metal ligand complexes formed by Tc(IV) is proposed as the largest factor differentiating the apparent stability constants of Tc(IV) and V(IV). This work shows that V(IV) is a poor analog for Tc(IV); however, despite the differences in complexation mechanism between V(IV) and Tc(IV), V(IV) still appears to have some use for predicting Tc(IV) complexation behavior.     

Thermodynamic and Kinetic Parameters of Cerium(IV) Complexes with Some Dicarboxylic Acids

The thermodynamic and kinetic parameters of the cerium(IV) complexes formed in the initial stage of oxidation of dicarboxylic acids (H₂L), like pentanedioic, butanedioic, propanedioic, and ethanedioic acids, by cerium(IV) sulfate were studied by the spectrophotometric and pH-potentiometric methods with the aid of integral kinetic methods at an ionic strength I = 2 mol/L within the pH range of–0.3–1.6 in a sulfuric acid medium and at temperature of 293.15 K. The composition of these complexes, the form of organic ligand existence therein, the thermodynamic parameters of their formation, and the kinetic parameters of their intramolecular redox decomposition were determined. Linear correlations between the found thermodynamic and kinetic parameters of the examined complexes [CeOHL]⁺ were obtained. The rate equation of the redox process occurring in the systems Ce⁴⁺–H₂L was established and the corresponding reaction model was considered.     

Synthesis and Characterization of Solid Coordination Complexes of Diamides for Uranium(VI) and Thorium(IV)

Five kinds of solid coordination complexes of uranium(VI) and thorium(IV) with the diamide (N,N,N,N-tetrabutylmalon-amide (TBMA), N,N,N,N-tetrabutylsuccinylamide (TBSA), N,N,N,N-tetrabutylglutaramide (TBGA), N,N,N,N-tetrabutyl-adipicamide (TBAA)) were synthesized. All these complexes of UO₂(NO₃)₂·TBMA, UO₂(NO₃)₂· TBSA, [UO₂(NO₃)₂·(TBGA^1/2)₂] _x , UO₂(NO₃)₂·TBAA and Th(NO₃)₄·2TBMA were characterized by elemental analysis, UV spectra, IR spectra and ¹³C NMR spectra. The coordination form and proposed structures of the complexes are also discussed.     

Metal Chelates of Cerium (III), Thorium(IV) and Dioxouranium(VI) with Some Heterocyclic AZO Dyes; Potentiometric and Spectrophotometric Studies

ABSTRACT

The stepwise formation constants of Ce³⁺, Th⁴⁺ and UO₂ ²⁺ complexes with four azo compounds based on I-phenyl-2, 3-dimethylpyrazoline-5-one nucleus namely; 4-phenylazo- (2-hydroxy, 5-x) 1-pheny1-2, 3-dimethy1-pyrazoline-5-one, where x= H (1), OH (II), COOH (III) and NH₂ (IV) have been determined potentiometrically at different temperatures and ionic strengths in 30% (v/v) ethanol-water solutions, then the thermodynamic parameters are calculated.

Negatives values of both ∠H and ∠G are obtained indicating the exothermic and spontaneous nature of complexation reactions, whereas positive values of ∠S show that entropy consideration favour complex formation. The study at different ionic strengths shows that an increase in the latter causes a decrese in the pK values. The azo compounds are also tested as new reagents for the spectrophotometric determination of Ce³⁺, Th4⁺ and UO₂ ²⁺ ions in synthetic and natural solutions by extensive investigation of the optimum conditions favoring the formation of colored complexes.     

Structure of the Aqua Ions and Fluoride Complexes of Uranium(IV) and Thorium(IV) in Aqueous Solution an EXAFS Study

The structures of aqueous M(4+)(aq) and MF(3+)(aq), where M is uranium(IV) or thorium(IV), have been determined by L(III) edge EXAFS using data from solutions of 1.5 M HClO(4) in which the M(IV) concentrations ranged from 0.03 to 0.3 M. A least-squares refinement of the data for the aqua ions indicated 10.8 +/- 0.5 water molecules in the first hydration sphere of both ions and M-O bond distances for U(IV) and Th(IV) of 2.42 +/- 0.01 and 2.45 +/- 0.01 ?, respectively. By considering both previous structure information and the EXAFS data, we selected N = 10 +/- 1 as the most likely coordination number of both M(IV) aqua ions. EXAFS measurements from acidic aqueous uranium(IV) and thorium(IV) solutions containing fluoride show that large changes in the first coordination sphere occur. The experimental data indicates an asymmetrical distribution of the distances, probably as a result of differing M-F and M-O bond lengths. These can be described by a model that contains two different bond distances, one M-F distance at 2.10 ? and one M-O distance at 2.45 ? for U(IV); for Th(IV), the corresponding distances are 2.14 and 2.48 ?. The total coordination number in this model is unchanged from the aqua ions, i.e., 10 +/- 1.     

Thorium(IV) molecular clusters with a hexanuclear Th core

Three polynuclear thorium(IV) molecular complexes have been synthesized under ambient conditions from reactions of an amorphous Th precipitate, obtained via hydrolysis, with carboxylate functionalized ligands. The structures of Th(6)(OH)(4)O(4)(H(2)O)(6)(HCO(2))(12)·nH(2)O (1), Th(6)(OH)(4)O(4)(H(2)O)(6)(CH(3)CO(2))(12)·nH(2)O (2), Th(6)(OH)(4)O(4)(H(2)O)(6)(ClCH(2)CO(2))(12)·4H(2)O (3) each consist of a hexanuclear Th core wherein six 9-coordinate Th(IV) cations are bridged by four μ(3)-hydroxo and four μ(3)-oxo groups. Each Th(IV) center is additionally coordinated to one bound "apical" water molecule and four oxygen atoms from bridging carboxylate functionalized organic acid units. "Decoration" of the cationic [Th(6)(μ(3)-O)(4)(μ(3)-OH)(4)](12+) cores by anionic shells of R-COO(-) ligands (R = H, CH(3), or CH(2)Cl) terminates the oligomers and results in the formation of discrete, neutral molecular clusters. Electronic structure calculations at the density functional theory level predicted that the most energetically favorable positions for the protons on the hexanuclear core result in the cluster with the highest symmetry with the protons separated as much as possible. The synthesis, structure, and characterization of the materials are reported.     

Challenging the Metallocene Dominance in Actinide Chemistry with a Soft PNP Pincer Ligand: New Uranium Structures and Reactivity Patterns

A soft embrace for U : Replacement of C₅Me₅ by the soft PNP pincer ligand is a successful strategy to promote new reactivities and support new structures for the actinide series (see picture, py–O=pyridine‐N‐oxide). The specific electronic and steric properties of the PNP ligand enable access to previously unreported structures not available for the C₅Me₅ ligand set and support not only low‐valent uranium but also the high‐valent uranium(VI) ion.

     

A Mononuclear Uranium(IV) Single‐Molecule Magnet with an Azobenzene Radical Ligand

A tetravalent uranium compound with a radical azobenzene ligand, namely, [{(SiMe₂NPh)₃‐tacn}U^IV(η²‐N₂Ph₂^.)] ( 2 ), was obtained by one‐electron reduction of azobenzene by the trivalent uranium compound [U^III{(SiMe₂NPh)₃‐tacn}] ( 1 ). Compound 2 was characterized by single‐crystal X‐ray diffraction and ¹H NMR, IR, and UV/Vis/NIR spectroscopy. The magnetic properties of 2 and precursor 1 were studied by static magnetization and ac susceptibility measurements, which for the former revealed single‐molecule magnet behaviour for the first time in a mononuclear U^IV compound, whereas trivalent uranium compound 1 does not exhibit slow relaxation of the magnetization at low temperatures. A first approximation to the magnetic behaviour of these compounds was attempted by combining an effective electrostatic model with a phenomenological approach using the full single‐ion Hamiltonian.     

The First Iminoamidophosphite Ligand: Synthesis and Complexation with Rhodium(I)

Optically active amidophosphite with the peripheral imino group (R)-(Et₂N)₂POCH₂CH(Et)N=CHPh is synthesized through one-stage phosphorylation of the corresponding imino alcohol. Its reaction with [Rh(CO)₂Cl]₂ (at P : Rh = 1) yields the mononuclear chelate [Rh(CO)(P^N)Cl]. Structures of the compounds are determined by IR, ³¹P, and ¹³C NMR spectroscopy, mass spectrometry, and polarimetry.     

Complexation of Uranium(VI) by Gluconate in Alkaline Solutions

Gluconate (C₆H₁₁O₇) is a polyhydroxycarboxylic acid that can be assumed as a representative model compound for a wide variety of additives in cement formulations. It can play an important role in the cementitious environments characteristic of radioactive waste disposal sites, as actinides (such as U(VI)) may form stable complexes with gluconate. As a consequence, the presence of the organic ligand can lead to an enhancement of actinide mobility. The results presented in this work show that gluconate increases significantly the uranium solubility at pH_c = 12; the study of U(VI) speciation in alkaline solutions is complex, mainly due to formation of sparingly soluble uranates of varying compositions (e.g. sodium and potassium uranates). UV–Vis measurements in the alkaline pH range have been used to determine the stability constant for the formation of a 1:1 U(VI):gluconate complex. The results obtained with spectroscopic techniques allow explaining the results from solubility experiments, from both over- and under-saturation conditions.     

Thermodynamic Studies on the Complexation Reactions of Copper(II) Complex of o2n2-Donor Macrocycle with Halide and Pseudohalide Ions

Complexation reactions of 5,6,7,8,9,10,16,17-octahydrodibenzo[e, m][1, 4]dioxa-[8, 11]diazacyclotetradecine-copper(II) complex with halide and pseudohalide ions have been studied at 25.0° in three water-methanol mixed solvents by spectro-photometric method. It is found that the equilibrium constants increases in the order of 50 vol.% CH₃OH<75 vol.% CH₃OH<95 vol.% CH₃OH for solvents and I-<Br^?<CI^?<SCN^?, N^?₃ for anions.