阳离子光固化活性单体氧杂环丁烷的合成及表征

以3-乙基-3-羟甲基氧杂环丁烷为原料，与甲基磺酰氯磺酰化，得到3-乙基-3-甲磺酰基甲基氧杂环丁烷；在碱性条件下，以PEG600作相转移催化剂，用3-乙基-3-甲磺酰基甲基氧杂环丁烷与乙二醇醚化得到2-[（3-乙基-3-氧杂环丁基）甲氧基]乙醇；然后与甲基丙烯酸甲酯进行酯交换得到目的产物2-[（3-乙基-3-氧杂环丁烷）甲氧基]甲基丙烯酸乙酯。3-乙基-3-羟甲基氧杂环丁烷与3-溴丙烯反应，生成3-乙基-3-[（2-丙烯-1-基氧基）甲基]氧杂环丁烷，然后在氯铂酸的催化下，与三乙氧基硅烷反应得到3-乙基-3-[[3-（三乙氧基硅）丙氧基]甲基]氧杂环丁烷。产物经红外光谱和核磁共振谱表征得到确证。     

可光固化单体2,7-二溴-9,9-双[4’-(3″-乙基-3″-氧杂环丁烷甲氧基己基氧基)苯基]芴的合成

以芴为原料,经溴代和氧化反应制得2,7-二溴芴酮(3);3与苯酚反应合成2,7-二溴-9,9-双(4’-羟基苯基)芴(4);4与3-(6’-溴己氧基甲基)-3-乙基氧杂环丁烷经醚化反应合成了可光固化单体2,7-二溴-9,9-双[4’-(3″-乙基-3″-氧杂环丁烷甲氧基己基氧基)苯基]芴,总收率67%,其结构经1H NMR,13C NMR和元素分析表征。     

新型含短氟碳链侧基的氧杂环丁烷单体的合成与表征

应用含短氟碳链的功能性聚合物可以避免因使用含长氟碳链化合物给环境带来的潜在危害. 以全氟丁基磺酰氟为原料, 通过磺酰化和N-烷基化合成带有端羟基的中间体4, 再通过2,2-二溴甲基氧杂环丁烷(2)与4的Williamson醚化反应合成了含全氟丁基磺酰胺侧基的新型氧杂环丁烷衍生物1a和1b. 以5,5-二甲基海因为原料, 采用类似的合成路线, 合成了带海因侧基的新型氧杂环丁烷单体6.     

微波合成3,3’-双叠氮甲基环氧丁烷-3-叠氮甲基-3’-甲基环氧丁烷无规共聚物

以1,4-丁二醇/三氟化硼·乙醚为引发体系,通过阳离子开环共聚合方法合成了3,3’-双溴甲基环氧丁烷-3-溴甲基-3’-甲基环氧丁烷(BBMO-BrMMO)无规共聚物,采用13CNMR进行了结构表征.然后用微波法对BBMO-BrMMO无规共聚物进行大分子叠氮化反应,合成了3,3’-双叠氮甲基环氧丁烷-3-叠氮甲基-3’-甲基环氧丁烷(BAMO-AMMO)无规共聚物,并对叠氮化反应动力学进行了研究.结果表明,BBMO-BrMMO无规共聚物的共聚组成和微观序列分布可以通过调节单体的物质的量配比实现可控性.叠氮化反应速率由相转移催化剂四丁基溴化铵(TBAB)的用量控制,反应速率常数为k=48.85L/(mol·h)(TBAB=1%);k=51.95L/(mol·h)(TBAB=5%);k=62.72L/(mol·h)(TBAB=10%).微波法缩短了叠氮化反应时间,提高了合成过程的安全性,并且未改变共聚物的链结构.     

3-(2-氰基乙氧基)甲基-和3-[甲氧基(三乙氧基)]甲基-3′-甲基氧杂环丁烷的合成及其共聚体研究

以三羟甲基乙烷为原料,通过脱水反应首先制得3-羟甲基-3′-甲基氧杂环丁烷(HMO).HMO再分别与丙烯腈和二缩三乙二醇单甲醚反应得到两个取代氧杂环丁烷单体3-(2-氰基乙氧基)甲基-和3-[甲氧基(三乙氧基)]甲基-3′-甲基氧杂环丁烷(HMOAN和HMOPEO).再用阳离子开环聚合方法,以BF3.乙醚作催化剂,丁二醇为引发剂,将两类单体共聚即可得到一系列不同组成的共聚物(PAP).利用1H NMR谱图计算了该共聚物中两种不同结构单元的比,结果表明,其与投料比基本吻合.GPC测得该共聚物的数均分子量范围为2 756~5 342,分子量分布为1.26~1.83.DSC测试结果发现,除在225~246 K之间有一个玻璃化转变温度之外,在305~348 K之间还存在一个热转变温度.TGA测得共聚物的分解温度为573 K,远高于目前广泛使用的液体电解质.电导率测试结果表明,AN20的室温电导率可达到1.07×10-5S/cm,353 K时电导率可达到2.79×10-4S/cm,接近实用要求.     

3-(2-氰基乙氧基)甲基-和3-[甲氧基(三乙氧基)]甲基-3'-甲基氧杂环丁烷的合成及其共聚体研究

以三羟甲基乙烷为原料, 通过脱水反应首先制得3-羟甲基-3'-甲基氧杂环丁烷(HMO). HMO再分别与丙烯腈和二缩三乙二醇单甲醚反应得到两个取代氧杂环丁烷单体3-(2-氰基乙氧基)甲基-和3-[甲氧基(三乙氧基)]甲基-3'-甲基氧杂环丁烷(HMOAN和HMOPEO). 再用阳离子开环聚合方法, 以BF 3\5乙醚作催化剂, 丁二醇为引发剂, 将两类单体共聚即可得到一系列不同组成的共聚物(PAP). 利用 1H NMR谱图计算了该共聚物中两种不同结构单元的比, 结果表明, 其与投料比基本吻合. GPC测得该共聚物的数均分子量范围为2 756～5 342, 分子量分布为1.26～1.83. DSC测试结果发现, 除在225～246 K之间有一个玻璃化转变温度之外, 在305～348 K之间还存在一个热转变温度. TGA测得共聚物的分解温度为573 K, 远高于目前广泛使用的液体电解质. 电导率测试结果表明, AN20的室温电导率可达到1.07×10 -5 S/cm, 353 K时电导率可达到2.79×10 -4 S/cm, 接近实用要求.     

N-烷基-N-(2-羟乙基)-N,N-二甲基溴化铵与十二烷基硫酸钠复配系统的双水相

合成了N-十二烷基-N-(2-羟乙基)-N,N-二甲基溴化铵、N-十四烷基-N-(2-羟乙基)-N,N-二甲基溴化铵和N-十六烷基-N-(2-羟乙基)-N,N-二甲基溴化铵等3个季铵盐阳离子表面活性剂. 研究了它们以及N-十六烷基-N,N,N-三甲基溴化铵(CTAB)与阴离子表面活性剂十二烷基硫酸钠(SDS)复配系统在313.15 K时的双水相行为. 复配系统在两个非常狭窄的区域能形成双水相, 两相区近似以等摩尔线为中心对称分布, 随着阳离子表面活性剂碳链长度的增长, 富含阳离子表面活性剂的双水相区向阴阳离子表面活性剂摩尔比减小的方向稍有移动.     

二代螺环树形化合物1,2,3,4,5,6,7,8,9,10,11,12-十二氢-2,2;6,6;10,10-三[3,3-二(烷氧羰基)-1,1-环亚丁基二甲氧基]三亚苯基的合成

以1,4-环己二酮、丙二酸二乙酯及多元醇等为原料, 经过两次“一锅煮”法合成了六种二代螺环树形化合物1,2,3,4,5,6,7,8,9,10,11,12-十二氢-2,2;6,6;10,10-三[3,3-二(烷氧羰基)-1,1-环亚丁基二甲氧基]三亚苯基螺环树形化合物, 其中烷氧基为异戊氧基、三羟甲基甲氧基、2,2-二溴甲基-3-羟丙氧基、2,2-二羟甲基丙氧基、二羟甲基膦甲氧基和(N-羟甲基-N-二羟甲基氨基乙基)甲氧基. 利用IR, NMR, MS和元素分析对合成的化合物进行了结构认证, 对影响反应的因素进行了讨论.     

Microwave Synthesis of 3,3＇-Bisazidomethyl Oxetane-3-Azidomethyl-3＇-Methyl Oxetane Random Copolymer

以1,4-丁二醇/三氟化硼·乙醚为引发体系,通过阳离子开环共聚合方法合成了3,3＇-双溴甲基环氧丁烷-3-溴甲基-3＇-甲基环氧丁烷（BBMO-BrMMO）无规共聚物,采用13CNMR进行了结构表征.然后用微波法对BBMO-BrMMO无规共聚物进行大分子叠氮化反应,合成了3,3＇-双叠氮甲基环氧丁烷-3-叠氮甲基-3＇-甲基环氧丁烷（BAMO-AMMO）无规共聚物,并对叠氮化反应动力学进行了研究.结果表明,BBMO-BrMMO无规共聚物的共聚组成和微观序列分布可以通过调节单体的物质的量配比实现可控性.叠氮化反应速率由相转移催化剂四丁基溴化铵（TBAB）的用量控制,反应速率常数为k=48.85L/（mol·h）（TBAB=1%）;k=51.95L/（mol·h）（TBAB=5%）;k=62.72L/（mol·h）（TBAB=10%）.微波法缩短了叠氮化反应时间,提高了合成过程的安全性,并且未改变共聚物的链结构.     

一种新型含磷-溴-氮阻燃剂的合成

以三氯氧磷、季戊四醇、2 ,3-二溴丙醇及三聚氰胺等为原料合成了一种新型磷 -溴 -氮阻燃剂 0 - (2 ,4,6 -三氧杂 - 1-氧基磷杂双环 [2 .2 .2 ]辛烷 - 4-亚甲基 ) - 0 - 2 ,3- (二溴丙基 )磷酸三聚氰胺盐 (Ⅲ ) .改进了中间体 4-羟甲基 - 2 ,6 ,7-三氧杂 - 1-氧基磷杂双环 [2 .2 .2 ]辛烷 (Ⅰ )的合成条件 ,元素分析、红外光谱等确定了结构     

HEPT类化合物的QSAR研究

为定量结构／活性相关性研究提取了量子化学参数,拓扑指数Am,分子连接性指数^mxt及疏水性常数,同时应用正交变换和最佳变量子集算法（Leaps-and-Bonds)进行了变量压缩和选择,进而实施了多元回归分析,并由此结果进行了HEPT类化合物（1－[(2-hydroxyethoxy)methyl]-6-(phenylthio)-thymine derivatives)的结构／活性关系的理论解释,进行了人工神经网络法对于该类化合物的活性预测,其结构明显好于多元回归法。     

Effect of the pH of the medium on the chemical shifts in the PMR spectra and on the distribution of the π-electron density

The dependence of the chemical shifts of the ring protons on the pH of the medium for a number of 4-hydroxyquinoline derivatives was studied by means of PMR spectroscopy. The dipolar and uncharged hydroxy forms exist in equilibrium in aqueous solutions. The effect of intramolecular hydrogen bonding on the character of the dependence of the chemical shift on the pH of the medium in the case of 3-piperidinomethyl-4-hydroxyisoquinoline was investigated. The possibility of the separate protonation of the ring nitrogen and the side-chain nitrogen in 3-piperidinomethyl-4-hydroxyisoquinoline was established. The distribution of the -electron density in 4-hydroxyisoquinoline is in good agreement with its chemical behavior.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 11, pp. 1546–1549, November, 1971     

Effect of the pH of the medium on the chemical shifts in the PMR spectra and on the distribution of the π-electron density

The dependence of the chemical shift of the ring protons on the pH of the medium for a number of 3-hydroxyquinoline derivatives was studied by PMR spectroscopy. The regions of ionization of the molecules, which correspond to the ranges of acidic, neutral, and alkaline media, were found. In D₂O, 3-hydroxyquinoline is present only in the uncharged hydroxy form. The presence of intramolecular hydrogen bonding in 4-dimethylaminomethyl-3-hydroxyquinoline has a substantial effect on the character of the dependence of the chemical shift on the pH of the medium; the existence of separate protonation of the nitrogen atoms of the ring and the side chain of 4-dimethylaminomethyl-3-hydroxyquinoline was established. The distribution of the -electron density in the 3-hydroxyquinoline molecule is in good agreement with its chemical behavior during electrophilic substitution.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 11, pp. 1540–1545, November, 1971.     

液滴荧光传感与计算机联用技术在微量分析中的应用

通过在LS55型荧光-磷光-发光分光光度计上加装液滴产生及调节附件,采用计算机采集与分析处理数据,成功地研制了双通道液滴光化学传感装置.利用葡聚糖凝胶对复合维生素B中不同组分的选择性吸附来达到分离与同时检测的目的,并将其用于复合维生素B药片的分析,取得了满意的结果.     

On the theory underlying the Car-Parrinello method and the role of the fictitious mass parameter

The theory underlying the Car-Parrinello extended-Lagrangian approach to ab initio molecular dynamics (CPMD) is reviewed and reexamined using "heavy" ice as a test system. It is emphasized that the adiabatic decoupling in CPMD is not a decoupling of electronic orbitals from the ions but only a decoupling of a subset of the orbital vibrational modes from the rest of the necessarily coupled system of orbitals and ions. Recent work [J. Chem. Phys. 116, 14 (2002)] has pointed out that, due to the orbital-ion coupling that remains once adiabatic decoupling has been achieved, a large value of the fictitious mass mu can lead to systematic errors in the computed forces in CPMD. These errors are further investigated in the present work with a focus on those parts of these errors that are not corrected simply by rescaling the masses of the ions. It is suggested that any comparison of the efficiencies of Born-Oppenheimer molecular dynamics (BOMD) and CPMD should be performed at a similar level of accuracy. If accuracy is judged according to the average magnitude of the systematic errors in the computed forces, the efficiency of BOMD compares more favorably to that of CPMD than previous comparisons have suggested.     

From the Micro- to the Macro-: Managing the Conservation of the Warship,Vasa

Sweden's famous warship, Vasa, sank on her maiden voyage in August 1628, and remained on the bottom of Stockholm harbour for 333 years. Raised in 1961, she became the first large-scale wooden object to be treated with polyethylene glycol (PEG). In the summer of 2000 a number of acidic salt precipitations were noticed on the surface of the ship and on wooden artefacts in the storerooms. An international research project has been established to look into the causes of this problem and suggest possible re-treatments. Meanwhile projects are underway to monitor movements in the ship, to build a better support system, and to replace the thousands of iron bolts holding the structure together, while a sophisticated new climate system has recently been installed in the museum.